I lost sound shortly after iOS 6 was down loaded. Sound works headphones.

I lost sound shortly after iOS 6 was down loaded. Sound works with headphones. When no headphones are plugged in and I try to use the volume control on side sound effects comes up but no sound is made. I get sound over main speaker when i adjust alert volume. I restarted and downloaded iOS 6 update with no results.

Try this:
1. Settings>General>Use Side-Switch To>Lock Rotation.
2. Double-click the Home button and swipe Task Bar to the right.
3. Make sure the button on the far left of Task Bar is not muted

Similar Messages

Sound problems after iOS 4.2 upgrade

Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

HT1414 How can I retrived my old files after iOS was restored by 1 of the apple store?

How can retrived my old files, games and pictures after iOS was loaded?

Restore off of your computer, and set up your phone off your previous back-up.

I had a brand new Mac book pro one month old and the hard drive died. Right before it died I was down loading pictures off a memory card and now they aren't on my memory card! They are wedding pictures I took for a friend and irreplaceable! Please help!!

I had a one month old Mac book pro and the hard drive fried! I was down loading a friends wedding pictures when it stopped working and started heating up. I plugged it in and turned it off as it was making a clicking noise. When I turned it back on the was a grey box with a question mark and nothing else. When I took my memory card out the pictures were gone. I took it back to best buy where I bought it and they said it was dead, needed a new hard drive and all my info is lost! Is there any way to get back those irreplaceable wedding pictures?

There are some data recovery programs (software). I would look into that for the images on the card. When files are deleted, the files are still there, just the headers are removed. That being said, a format of the card or new files written to the card can overwrite deleted files.
The physical hard drive could be thousands of dollars to forensically save, with no guarantee.

My I phone was down loading the latest update to O S 7.o and it froze showing an I tunes icon and the wire connection to the charger. My phone is not working now.

My I phone was down loading the latest update to OS 7.0 and it froze showing an I tunes icon, and an arrow pointing to the cord used to charge and download.
I can't use the phone now its frozen in this screen.

Hello, Indy car fan.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring or updating an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

Since iOs 6 down loaded My Apps won't update.

Since iOs 6 down loaded My Apps won't update. I have had quite a few apps that needed to be updated when I tap the update button it says updating but nothing happens. The apps have been sitting dark with the word "Waiting" no lines moving across them like they are updating. It has been going on for about four days I don't know what to do I? Please help I can't us these apps and I have others that need updating but I am afraid to do it?

I just had this same problem. Others in this discussion area suggested powering off their iPad and then powering back up. This worked for me and now all of my apps are updated. Hope this might help.

I purchase songs and only a portion of the song was down loaded?

HELP - I purchase songs and only a portion of the song was down loaded?

Other people have been having similar problems with songs over a number of days, I assume that there has been a problem with Apple's servers.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

Cannot connect to FB from "Settings" after IOS 6 - the FB-app works correctly

Cannot connect to FB from "Settings" after IOS 6 - the FB-app works correctly - but logging in from the settings to be able to "match" my contacts just doesn´t work. It just keeps "porcessing", when I try to login. Any good advice?

I found a fix. I hope this helps.
http://www.dencio.com/2012/01/fixed-facebook-20-and-twitter-20-for.html
I hope it works for you.
Dencio

IPad 3 sound issues after iOS 8 upgrade

iOS sounds and some apps have very little or no volume after iOS 8 upgrade.

Hello mhael,
Thank you for participating in the Apple Support Communities.
If you experience popping sounds and distortion from your iPad Air speakers after updating iOS, start with the troubleshooting steps in this link:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
All the best,
Jeremy

After iOS 5 cannot load content (Win7/iPod Touch 4)

I have been trying to do this for over a week now.
I have an iPod touch 4th gen and I was upgrading from iOS 4.3.5 to iOS 5.0 on a Windows 7 64bit PC. After installing iTunes 10.5.0.142 and finishing the iOS 5 update iTunes saw everything on the iPod as "Other". The applications on the iPod touch worked but I could no longer access music or movies.
Not only that but when I restored and started it as a "new user" I couldn't put any data on it in any way. I put the iPod touch into DFU mode and reverted to 4.3.5 and everything worked 100%.
I have an original iPhone and it works with iTunes 10.5 just like it should.
After calling up Apple support they said that this has been reported and I did everythign I should have and it should be ok to upgrade again and if the issue continues I should go to an apple store to get a replacement. Sure enough the problem happend again and so I went to a local store to replace it.
Taking the replacement iPod touch home I connected it to my computer and just like before I could not add anything to the iPod touch. I then proceded to uninstall iTunes reboot the computer and then re-install the program. Then in command prompt (ran as administrator) I typed in "netsh winsock reset" and rebooted. Nothing.
I was going to revert back to 4.3.5 but it looks like Apple has now stopped allowing people to do that. Please help... Please!

After almost 2 weeks of trying to get this to work I have now gotten everything operational again.
I followed the instructions on how to "Completely Remove iTunes and Other Apple Software from a Windows Computer" I followed all the steps except for instaling the http://www.howtogeek.com/howto/2912/everything-is-an-awesome-utility-that-locate s-files-and-folders-instantly-in-windows/Everything & ByeTunes programs.
After apple was removed from my PC I reinstalled iTunes and it now works like it is supposed to. :-)
One would think that the uninstall program would have done this, but I guess apple doesnt want to make it all that easy to remove itself from windows ;-)

I unplug my phone while it was down loading by accident now it is stuck in this mode that want allow me to use the phone

Hello my name is Jostlin
I unplugged my phone by accident while it was I down load mode now it it stuck with this plug and ITune picture on the screen I tried rebooting it.

thanks for the reply, brian, but unfortunately that is what i meant by the hard reboot. i've done that many, many times and it's still stuck. nothing is helping and i can't even get it to sync to iTunes to restore it.
thanks anyway!

I was down loading music from my list of songs from my computer, the playlist on my iPod shows the title of the song, but there is no music, and the iPod shuffles to the next song

I down loaded songs from my playlist off my computer to my iPod, the playlist on my iPod shows the title of the song, but no music plays and my iPod shuffles to the next available song. I down loaded about 300 songs at once, was that to much at one time ? How do I get those songs on my iPod without duplicating song titles on the playlist? Plus I have a couple of song duplications on the playlist, can't figure out how to remove them.

If iTunes purchases, delete and redownload by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise delete and resync if they play OK in iTunes on the computer

HT201210 can't restore appleTv after stuck from down load

can't restore apple Tv after stuck from down load

Have you actually tried recovery mode?
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.
Or DFU mode?
http://osxdaily.com/2010/12/04/ipad-dfu-mode/

Can I get a refund if album was down loaded twice

Can I get a refund if an album has down loaded twice?

Did you pay for it twice?
MJ

Password Protection to the Excel File that was down loaded

Hi Friends,
I had an requirement regarding the excel file.whenever the excel file is down loaded on the desktop it should be password protected.i..e, no one should be able to open the file unless they have the password.

REPORT ZWMI_TRUCK_DOWNLOAD no standard page heading.
======================================================================
Program Name : ZWMI_TRUCK_DOWNLOAD                                   *
Description : This Program is used to get all truck load status     *
               and download into XLS File and fields are Route #,    *
               Dispatch time ,Closing time ,Scan Details.            *
Author       : Seshu                                                 *
Date         : 02/15/2007                                            *
MODIFICATION HISTORY                                                 *
DATE    | AUTHOR   | CHANGE #   | DESCRIPTION OF MODIFICATION        *
--|||--
02/15/07| Seshu    | DEVK922058 | Initial                            *
02/20/07| Seshu    | DEVK922068 | Changed the name as per Naming     *
                                  Convention                         *
03/14/07| Seshu    | DEVK922126 | Included date as Range             *
======================================================================
Tables
tables : zsdcarton,
         ztruck,
         ztruckstatus.
Constants
constants: c_werks(4) type c value '1000'.
Internal table for Ztruck
data : begin of i_ztruck occurs 0,
       werks like ztruck-werks," Plant
       vdatu like ztruck-vdatu, " Delivery date
       ZZTRKNO like ztruck-ZZTRKNO, " Route #
       ZZSHIPTIME like ztruck-ZZSHIPTIME, " Dispatch time
       ZCLTIME like ztruck-ZCLTIME, " Truck close time
       end of i_ztruck.
Internal table for ZSDCARTON
data : begin of i_zsdcarton occurs 0,
       lateflag like zsdcarton-lateflag,
       zzslot like zsdcarton-zzslot,
       status like zsdcarton-status,
       end of i_zsdcarton.
Internal table for Final output
data : begin of i_final occurs 0,
       vdatu like ztruck-vdatu, " Delivery Date
       ZZTRKNO like ztruck-ZZTRKNO, " Route #
       ZZSHIPTIME like ztruck-ZZSHIPTIME, " Dispatch time
       ZCLTIME like ztruck-ZCLTIME, " Truck close time
       load_compl_c(5)     type n , " Load Complted Time
       status_s_total(5) type n, " No Scan/Load
       status_l_total(5) type n, " Late Scan
       end of i_final.
Internal Table XLS File Header
DATA: BEGIN OF i_head OCCURS 0,
      field(30) TYPE c,
      END OF i_head.
Variables
status couter
data: status_total(5)   type n,
no scan / no load
      status_s(3)       type n,
      status_s_total(5) type n,
good
      status_g(3)       type n,
      status_g_total(5) type n,
late
      status_l(3)       type n,
      status_l_total(5) type n,
manual
      status_m(3)       type n,
      status_m_total(5) type n,
alternative
      status_a(3)       type n,
      status_a_total(5) type n.
S E L E C T I O N    -   S C R E E N *************************
selection-screen : begin of block blk with frame title text-001.
select-options : p_vdatu for zsdcarton-vdatu obligatory
                default sy-datum.
selection-screen : end of block blk .
S T A R T - O F - S E L E C T I O N ******************
start-of-selection.
Get the data from ZTRUCK and
perform get_data_tables.
Down load the data into XLS file
perform get_download.
S T A R T - O F - S E L E C T I O N ******************
end-of-selection.
*&      Form get_data_tables
FORM get_data_tables.
data : lv_time like sy-uzeit.
select werks
         vdatu
         zztrkno
         zzshiptime
         zcltime from ztruck into table i_ztruck
                             where werks = c_werks
                             and   vdatu in p_vdatu.
if sy-subrc ne 0.
    message e000(zwave) with 'No data found for given current date'.
endif.
loop at i_ztruck.
    refresh : i_zsdcarton.
    clear :   i_zsdcarton,
              lv_time.
Get the Scan Status for Every route
    select lateflag zzslot status from zsdcarton into table i_zsdcarton
                           where werks = i_ztruck-werks
                           and   vdatu = i_ztruck-vdatu
                           and   zztrkno = i_ztruck-zztrkno.
    if sy-subrc eq 0.
      loop at i_zsdcarton.
        case i_zsdcarton-lateflag.
late cartons
          when 'X'.
late and never loaded
            if i_zsdcarton-zzslot = space.
              add 1 to status_s.
            else.
              add 1 to status_l.
            endif.
all other exceptions
          when space.
check if scanned
            case i_zsdcarton-zzslot.
good scan
              when 'S'.
                add 1 to status_g.
never scanned
              when space.
                if i_zsdcarton-status = space.
no scan
                  add 1 to status_s.
                else.
no load -> no scan
                  add 1 to status_s.
                endif.
manual scanned
              when 'M'.
                if i_zsdcarton-status = 'M'.
                  add 1 to status_g.
                elseif i_zsdcarton-status = 'E'.
exceprtion -> manual
                  add 1 to status_g.
                endif.
            endcase.
        endcase.
add totals
        add status_g   to status_g_total.
      Late Scan
        add status_l   to status_l_total.
        add status_a   to status_a_total.
      No Scan and Load
        add status_s   to status_s_total.
        clear : status_g,
                status_l,
                status_a,
                status_s.
      endloop.
    else.
      continue.
    endif.
Get the Load Complete Time
    select single uzeit from ztruckstatus into lv_time
                                   where   werks = i_ztruck-werks
                                   and     lgnum = '100'
                                   and     vdatu = i_ztruck-vdatu
                                   and     zztrkno = i_ztruck-zztrkno
                                   and     tstat = 'L'.
    if sy-subrc eq 0.
      write: lv_time(5)
              to i_final-load_compl_c     using edit mask '__:__'.
    endif.
Delivery Date
    i_final-vdatu = i_ztruck-vdatu.
Route #
    i_final-zztrkno = i_ztruck-zztrkno.
Dispach time
    i_final-zzshiptime = i_ztruck-zzshiptime.
Truck Close Time
    i_final-zcltime = i_ztruck-zcltime.
No Scan/ Load
    i_final-status_s_total = status_s_total .
Late Scan
    i_final-status_l_total = status_l_total.
    append i_final.
    clear : status_g_total,
            status_l_total,
            status_a_total,
            status_s_total,
            lv_time,
            i_final.
endloop.
ENDFORM.                    " get_data_tables
*&      Form get_download
      Download the data
FORM get_download.
data : lv_file like rlgrap-filename,
         lv_date(8) type c.
lv_date = sy-datum.
concatenate 'C:/Truckload' lv_date into lv_file.
Fill the Header Values
Delivery Date
i_head-field = 'Delivery Date'.
append i_head.
Route #
i_head-field = 'Route'.
APPEND i_head.
Dispatch Time
i_head-field = 'Dispatch Time'.
append i_head.
Closing Time
i_head-field = 'Closing Time'.
append i_head.
Load Completed Time
i_head-field = 'Load Completed Time'.
append i_head.
No Scan/Load
i_head-field = 'No Scan/Load'.
append i_head.
Late Scan
i_head-field = 'Late Scan'.
append i_head.
CALL FUNCTION 'EXCEL_OLE_STANDARD_DAT'
    EXPORTING
      FILE_NAME                       = lv_file
CREATE_PIVOT                    = 0
      DATA_SHEET_NAME                 = 'TruckLoad'
PIVOT_SHEET_NAME                = ' '
PASSWORD                        = ' '
PASSWORD_OPTION                 = 0
   TABLES
PIVOT_FIELD_TAB                 =
      DATA_TAB                        = i_final
      FIELDNAMES                      = i_head
   EXCEPTIONS
     FILE_NOT_EXIST                  = 1
     FILENAME_EXPECTED               = 2
     COMMUNICATION_ERROR             = 3
     OLE_OBJECT_METHOD_ERROR         = 4
     OLE_OBJECT_PROPERTY_ERROR       = 5
     INVALID_FILENAME                = 6
     INVALID_PIVOT_FIELDS            = 7
     DOWNLOAD_PROBLEM                = 8
     OTHERS                          = 9
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " get_download
In function module you have option like password protect..

I lost sound shortly after iOS 6 was down loaded. Sound works headphones.

Similar Messages

Maybe you are looking for