I lost the ability to CHOOSE to open or save a pdf link

Until a few weeks ago, when clicking on a pdf file I had the choice between saving the file on disk or opening it Acrobat 9. Now I don't have the choice anymore: Firefox only wants to save pdf files. Can anybody solve the problem?
== This happened ==
Every time Firefox opened
== A few weeks back

See [[Adobe Reader]] and [[Opening PDF files within Firefox]]

Similar Messages

Updated my appleTV to 2.0.2 - lost the ability to choose 1024x768 res

I recently updated my appleTV to 2.0.2 in order to be able to loop video with it, (saving it in qt_pro with the loop option checked under the view menu), but now I find that the resolution I was using (which is what the projectors that will be used only support) of 1024x768 is no longer accessible. I used to be able to press and hold the 'menu' and '+' buttons on the remote, and the appleTV would cycle through all resolutions, including 1024x768.
How do I access this resolution in the new 2.0.2 update?
My appleTV went from being the front-runner as an ideal high-definition projector for art installations to FAIL.

Re: the version of appleTV - I just updated it to the newest available version as of 2 days ago.
In terms of the resolution - It did support 1024x768. It wasn't a selectable option under TV resolution, but when you asked the appleTV to cycle through the resolutions by holding menu and +, 1024x768 came up. After which, in the resolutions it reported at the end of all the options under TV resolution was indeed 1024x768. Now it no longer does so.
The projector wasn't just resizing a 720p signal, because when the appleTV is outputting a 720p single the 256px above 1024 on the right are cropped, and the centre of the image is offset by the equiv.
Problem is if I restore back to 1.x whatever it came with, I was under the impression I wouldn't be able to get it to loop videos.

I've been taking screen shots for years and opening them from my desktiop. Suddenly, today, I've lost the ability to open them. I can right click on the picture and do "quicklook", but that's it. They just won't open. Similary, if I scan an image and sa

I've been taking screen shots for years and opening them from my desktiop. Suddenly, today, I've lost the ability to open them. I can right click on the picture and do "quicklook", but that's it. They just won't open.
Similary, if I scan an image and save it as a PDF file in pictures, I'm suddenly not able to open it either!
Why?

Move the com.apple.screencapture.plist file out of /username/Library/Preferences/ to the Desktop, log out and back in, and try again.
BTW, use the default 10 point setting for text. Your choice just wastes screen space.

I upgraded to v3.6.22 today and have lost the ability to ctrl-click a link to open the link in a new tab; how do I get this back?

I upgraded to v3.6.22 today and have lost the ability to ctrl-click a link to open the link in a new tab; how do I get this back?

Strangely enough, putting my laptop into Hibernate mode solved the problem. It didn't even take a reboot.
Running Windows Vista Enterprise SP2.

Photoshop CS6 updated and lost the ability to open DICOM files

My photoshop CS6 updated and I lost the ability to pen DICOM files (dcm file extension). any help on how to get it back? or should I just uninstall and re-install the entire program?

Oliver Sparrow wrote:
I note that teh Dreamweaver product is not listed on my registered product list here on line, and when I tried to register it, the system refused, saying that it was registered as a part of a 'systems purchase', or some such. I bought it as a download from an on-line retailer.
That certainly sounds like bogus software. I'd get rid of it (and do a clean reformat/reinstall of everything in case it has planted some malware in your system).

Lost the ability to spell check on all applications

I recently updated my system to Mavericks 10.9.4, since then I have lost the ability for spell checking in all applications. Check spelling while I type is not working and I am unable to check spelling manually through the app menus. Skype, Facebook, Notepad.. you name it, spelling correction functionality is no bueno. Has anyone ever heard of this? I have tried changing languages, booting in safe mode... the only thing I did notice was that the box to check "correct spelling automatically" won't stay checked, but clearly something else is wrong.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Itunes seems to have lost the ability to play purchased video

Before posting here, I've searched all over the place for a solution to this problem, I found many people who have very similar issues, some solved them, but their solutions haven't worked for me, others with problems closer to how'd I'd describe mine have yet to find a solution
My problem is, when I try to watch purchased tv shows, the video playback is horribly choppy. Most of the time it's like watching a screenshot with audio. (audio plays fine). I've tried all the suggestions of disabling direct3d etc to no avail. I have a brand new pretty beefy system that should have no problems running the video at all. The oddest thing though, is that early today the video worked fine, which confirms that it's not hardware insufficiency. After downloading 2 shows this evening, I watched them with perfectly smooth playback. After getting a few more tv shows, itunes suddenly lost the ability to playback smoothly, even after closing, opening itunes again, rebooting my computer, none of it helped. The only thing left to try which I will try if nobody has any idea what the problem might be, is to completly uninstall itunes and try reinstalling it again, since earlier the playback was fine.
Has anyone else encountered anything at all like this? Nothing about my system has changed since earlier this evening, I already had the most recent version of itunes when everything was working fine. No display drivers or any of that has changed. It was only a matter of a few minutes between smooth playback and where my itunes perminatly lost the ability to playback video properly.
I appoligize for the long winded message but I wanted to cover all the bases so people don't end up suggesting stuff I've already tried. The only clue that might be related is during download of one of the shows Windows Vista popped up the message that itunes had stop working, and I could try and find a solution or close the application. I just closed itunes and opened it again. Everything seemed fine but it may be (not positive though) that it was immediatly after that that the video nolonger played properly.

Post in the iTunes Windows section. This is the iTunes Mac area.
Make sure that your Quicktime is up to date.
MJ

Itunes seems to have lost the ability to play purchased videos

Before posting here, I've searched all over the place for a solution to this problem, I found many people who have very similar issues, some solved them, but their solutions haven't worked for me, others with problems closer to how'd I'd describe mine have yet to find a solution
My problem is, when I try to watch purchased tv shows, the video playback is horribly choppy. Most of the time it's like watching a screenshot with audio. (audio plays fine). I've tried all the suggestions of disabling direct3d etc to no avail. I have a brand new pretty beefy system that should have no problems running the video at all. The oddest thing though, is that early today the video worked fine, which confirms that it's not hardware insufficiency. After downloading 2 shows this evening, I watched them with perfectly smooth playback. After getting a few more tv shows, itunes suddenly lost the ability to playback smoothly, even after closing, opening itunes again, rebooting my computer, none of it helped. The only thing left to try which I will try if nobody has any idea what the problem might be, is to completly uninstall itunes and try reinstalling it again, since earlier the playback was fine.
Has anyone else encountered anything at all like this? Nothing about my system has changed since earlier this evening, I already had the most recent version of itunes when everything was working fine. No display drivers or any of that has changed. It was only a matter of a few minutes between smooth playback and where my itunes perminatly lost the ability to playback video properly.
I appoligize for the long winded message but I wanted to cover all the bases so people don't end up suggesting stuff I've already tried. The only clue that might be related is during download of one of the shows Windows Vista popped up the message that itunes had stop working, and I could try and find a solution or close the application. I just closed itunes and opened it again. Everything seemed fine but it may be (not positive though) that it was immediatly after that that the video nolonger played properly.

I'm going to take a wild guess and say that you have a SATA controlled hard drive. Apparently, there's some kind of bug with SATA disks and Vista and Quicktime/itunes video...and possibly Nvidia is involved as well.
The workaround is sticking the video on a flash drive in order to play it (because that avoids the SATA controller and thus bypasses the issue). It's a crappy workaround, IMO...and I'm not spending another cent on iTunes videos until the issue is actually fixed.

I lost the ability to order and hide site columns if i use custom content type with a custom Create Form

I have a team site collection and I want to add a new App of type Issue Tracking list. so I did the following:-
From the site collection I created a new App of type issue tracking.
Then from the site collection I created a new Content type named “CustomIssue” which has its parent as “Issue” content type.
I went to the Issue tracking list and I changed the default content type from Issue , to the new “CustomeIssue” content type.
I open the site collection using SP designer and I created a new Create form for my Issue tracking list based on the "CustomIssue" content type and I select to have the Create form as the default form when creating an item.
Everything till this point worked well. But when I open the “customIssue” content type , and I re-order the columns and I hide some columns, this was not reflected inside the custom Create form …
although when using the default content type and the default create form you can control the order of the fields and to specify if certain fields hold be hidden inside the Create form.. so can anyone advice on this please?

Hi,
According to your post, my understanding is that you lost the ability to order and hide site columns if i use custom content type with a custom Create Form.
I try to reproduce the issue, the result is the same as yours.
As a workaround, if I modify the custom content type form the site setting, and then change the NewForm as the default form, it will change the column orders.
However, if I use the new created form as the default form, it will remain the original orders.
I recommend that you modify the custom content type form the site setting, and then reset the NewForm as the default form.
The result is as below:
Best Regards,
Linda Li
Linda Li
TechNet Community Support
ok thanks for the explanation ,, but what if i want to change the order and hidde some fields in the future ,, do i have to chnage the defualt create form again ...

I have suddenly lost the ability to put events in my calendar on my iPhone. Why would this be happening? I have rebooted twice and am still having the issue.

I have suddenly lost the ability to put events in the calendar on my iPhone. I have rebooted twice and still nothing. Does anyone have a so,union for me?

iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage, follow these troubleshooting steps.Try to use an alternate Internet connection if available:
Try a different Wi-Fi connection
If your iOS device has an active cellular data plan, tap Settings > Wi-Fiand turn off Wi-Fi.
If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.

10.6.2 added and lost the ability to access external 500G HD

I have 4 Mac computers and used with delight my Iomega 500G HD which I purchased at the apple store for 3 or 4 years ago. It was connected to my Mac’s. by my airport and could be accessed by my MacBookPro, MacMini and my MacBook air. I upgraded to 10.6 Leopard Snow when it came out and my Apple computers accessed the 500G HD well. Recently I lost the ability to access my 500G HD.
I saw it on the computer desktop and when activated it said it was an allies and would not open. I did all the usual things trying to get help from Apple Techs and even took it and a computer to the Apple store. I was ready to discard the 500G HD since there was little help and Iomega seemed difficult to find an answer.
In my other residence I have a PowerBook G4 with 10.5.8 system and much to my surprise the 500G HD is fully working. Now my further discussion of this problem with Apple was not helpful. They had not heard of another similar problem and did not direct the problem to them but to Iomega, as I suspected. I tried to illustrate how as new systems were presented they alone or with the device supplier drivers or solutions were forthcoming and my example was with numerous printers. This was rejected reasoning.
My conclusion is there is no driver for the 500G with 10.6.2. It seemed to initially work especially since I upgraded to 10.6 as it was originally released. Up grading to the latest Apple upgrade to 10.26.2 must have created the problem.
If there any help and it must come from Iomega some combined effort by both Apple and Iomega. Now my problem is to convince them to own up to the incompatibility that occurred.
Ralph J Argen, MD
<Edited by Host>

Is your storage too full?
Check Settings > General > Usage and make sure your available space is absolutely no less than 10% of your device's total space.

I have an iPhone 4s in the UK with EE, I recently upgraded to iOS 8 and lost the ability to access cellular data.

I have an iPhone 4s in the UK with EE, I recently upgraded to iOS 8 and lost the ability to access cellular data.
I've upgraded to iOS 8.0.2 with no improvement.
I've reset network settings on both versions with no positive result.
I can't rollback to iOS 7 as apple has stopped signing the build.
I realise the 4s is fairly old tech but this experience has been quite time consuming and incredibly frustrating as I still haven't managed to resolve the issue. I had been holding back to upgrade to the new generation of iPhone but this experience and the negative press has made me seriously consider other options.

Here is what you can try,
Hold both the power and home buttons until the device powers off, may take 10sec. Let go of both as soon as screen goes black.
Open itunes on your computer and plug in your cable to the computer but NOT the phone.
Once itunes is open hold down the home button on phone and plug in cable and continue holding home button until you see the connect to iTunes logo on screen. iTunes will give a msg that a device has been detected in recovery mode. Now select restore and do not disconnect until you see your device in iTunes again.

Lost the ability to play back...

Something happened where I'm no longer able to play an ything back in Sountrack Pro multitrack projects. I hit the space bar, press the right arrow in the transport controls, and I get nothing. The timecode doesn't seem to be advancing either. The only thing that will play is the video file.
This all started when I was trying to replace a clip with audio from the same file. The problem with that was that the volume that I was hearing didn't reflect the changes in the volume automation envelope. That's a separate issue and if you have the answer to that, by all means let me know.
Anyway, when I replaced that old clip, I lost the ability to play back. Dumping my preferences didn't help and neither did restarting the computer.

The error was caused by a problem with one of my firewire 800 drives. I tracked it down by trashing STP's preferences and restarting without any peripherals (drives, etc.) plugged in, opening STP (which played correctly), then one by one plugging in the drives until STP started having that issue again.
In Disk Utility I did "verify Disk" and then "Repair Disk" after it found some errors on the suspect disk. That seems to have cleared things up.

HT2492 ML Dashboard Calendar widget has lost the ability to change the date.

In ML the Dashboard calendar widget has lost the ability to change the day to other days. You can still navigate to different months with the arrow keys, but clicking on any day has no effect. I have not found a keystroke/mouse combination that allows the date to be changed from today's date.
This is a useful function for me, to quickly be able to see what I have scheduled on any day. Now I have to open iCal, which is annoying.

You are correct that there is no way to sort jobs in the print queue window in Snow Leopard. This is to be considered expected behavior. In other words, that's the way the software engineers intend it to work in Snow Leopard. You should provide Apple with feedback as to what you want. You can file a report at: _http://www.apple.com/feedback/macosx.html_.
Matt

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

I lost the ability to CHOOSE to open or save a pdf link

Similar Messages

Maybe you are looking for