I lost the airport express icon after updating to iTunes 11.0.3

I have been using itunes with my airport express flawlessly for a couple of months. 2 nights ago I updated to itunes 11.0.3 and when I opened itunes and tried to select Airport over the speakers the little icon was missing. I shut down and restarted itunes with no change.

Hey sckeith,
We have an article that goes over troubleshooting if your AirPlay icon doesn't appear on iTunes on your computer:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Cheers,
David

Similar Messages

Lost the airport express install cd, any ideas?

I am helping my mom get her home network set-up and prior to installing the airport express the original case with the install cd has been misplaced. i figured it'd be no big deal as the software would be on the apple support page, but after a thorough search i cannot seem to find anything. help?

Ma(h) Je D'E wrote:
I am helping my mom get her home network set-up and prior to installing the airport express the original case with the install cd has been misplaced.
Welcome to Apple's discussion groups.
Try here:
http://support.apple.com/kb/DL839

Airport Express 'names' not updating in Itunes 'speakers'

Love the iphone remote app
purchased a few airport expresses -
Named them - Renamed them
BUT itunes is NOT picking up the renames -
any clues on how I 'refresh' the speaker list names in itunes?

It has a separate name for the AirPort itself and the "iTunes Speaker Name." Use the AirPort Utility and click "Manual Setup" for the AirPort Express, then click the Music icon in the toolbar at the top. From there you can change the name it shows in iTunes.

Lost my Airport Express with latest update

So I did the latest update (9.03) and lost my APE. Reset the device and added it back onto my network. Everything is green and good to go.......... except " An error occured while connecting to the remote speaker "XYZ". An unknown error occurred (-15000)." Anyone else having this issue?

Not that problem specifically but iTunes now says my iPod is no longer authorized on this computer and that there's a problem with my iPhone and it needs to be restored. Sounds like there may be authorization issues with products that connect to iTunes if I'm having this problem and you're having Airport issues.
Wondering if there's anyone else out there experiencing these problems?

Lost the forward/back button after updating and the home button how do I get back?

Firefox updated to 7 and I lost all of my add ons including the home button and the forward/back button. I was able to get all of my add ons restored except the home button and the forward/back buttons. How do I get them back? Wish now that I had not updated.

Make sure that you do not run Firefox in Full Screen mode with all toolbars hidden.
* Press F11 to toggle full screen mode (Firefox/File > Full Screen)
If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization
* https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

I lost all my Bookmark icons after updating to 9.0.1 using OSX 10.6.8... what happened?

I still have icons in the Firefox bookmarks menu, next to the Search bar, but I'm so used to using the upper menu. Any ideas?

Perform the suggestions mentioned in the following articles:
* [[Latest Firefox issues]]
Check and tell if its working.

Murder on the Airport Express (AE 1st Gen cannot find Wireless while plugged in in the same room as the modem, router and Time Capsule

First, the reason for my compounded frustration:
I wrote a lengthy, comprehensive post on this late last night. I submitted it and received a notice at this URL:
https://discussions.apple.com/___sbsstatic___/maintenance.html?start=0&tstart=0
It gave a message: "A yellow sticky bearaing the words, "We'll be back soon." and a typed message reading, "We are busy updating Apple Support Communities for you and will be back shortly." Needless to say, it never came back. This morning as I began trying to reconstruct the very detailed post I wrote last night, the Communities system offered me an opportunity to restore the post from last night. Sadly, it contained only a portion of the first line.
I'm going to try it again. The problem inherent in putting it all in words last night, is that I no longer remember the exact wording of the error messages.
I've never gotten this Airport Express (1st gen, purchased mid 2010) to work. I thought it was working, but working poorly. A green light on the device is, apparently, NOT an indication of connection to the wireless. It wasn't workingl.
Description of devices which use the network:
I have a Broadband network with a modem.
It is connecteed to my 2T Timecapsule (purchased mid 2010).
Connected to that is a 24 port Cisco Router.
Not connecting to that, though showing a solid green light, is my Airport Express (1st Generation, purchased mid 2010)
Connected to the router are many ethernet cables giving hard-wired access to:
Printers (HP 8600 Pro purchased 2012))
MacBook Pro (purchased mid 2010) and
IMAC (purchased mid 2010).
3 Apple TV devices (1st generation purchased early 2011)
1 Apple TV device (2nd generataion purchased August 2012)
Connecting to the Wireless Network are IOS devices (current IOS versions on all)
iPad 2nd generation (purchased the day it was available)
iPad 3rd generation (purchased the day it was available)
iPod (mid 2010)
iPhones (4S)
Description of Layout of Network/House
My home is approximately 70 feet by 25 feet.
All Networking hardware is at one end of the house, the south side.
Airport Express (1st Gen, 2010) has been placed in the middle of the house to boost the wireless access at the north end of the house.
Ethernet cables are installed under flooring with cable ends extending up through flooring, and are availble to all devices with Ethernet ports..
Description of Problem
Investigation of the wireless access dysfunction with the iPad (2nd generation, mid 2010) revealed no connection to the Wireless Network, in spite of glowing green light on Airport Express and Airport Utility screen.
Description of actions taken to correct the problem
Loaded Airport Utility on MacBook Pro.
Airport Express shows green light on screen.
Double clicked on Airport Express Icon
Message that Airport Express was unable to extend the network
Message changes suddenly to something about not finding the Airport Express
Airport Utility searches Airport Express, attempting to read its settings
Message appears: Device not found. Airiport Express was previously part of the network, and offers to let me "forget" the base station.
I exit the error message.
A yellow triangle bearing an exclamation point sits to the left of the Airport Express' Description
Airport Express shows green light (as always)
Clicking the link, "Other AirPort Base Stations" indicates no base stations can be found.
Moved Airport Express to the room at the south end of the house containing all network devices
Plugged it in with clear, completely unobstructed view of Time Capsule.
Light on Airport Express flashes yellow and then turns solid green (like always)
Bring Mac into the room at the south end of the house containing all network devices and the Airport Express with the green light
Close Airport Utility on Mac
Reboot Mac
Open Airport Utility on Mac
Airport Express still shows as it did in 1.1.7. above.
Attempts to check Airport Express' access to Wireless network:
Unplugged Airport Express HEY! THE GREEN LIGHT WENT OUT!!! ;0)
Disconnected all Ethernet cables.
Tested ALL devices for Wireless access.
All devices access the Wireless network extremely well (dot and three curved bars) EXCEPT
IOS Devices tested at the north end of the house. These devices show a blank where the wireless bars should be, and intermittently show a dot.
Followed instructions contained in a similar discussion about Airport Express not functioning:
Unplugged all Networking Hardware
Powered off all Equipment which access the Internet in any possible way.
Powered up all Networking Hardware, one at a time, in the order described in that discussion.
Powered up all Equipment which access the internet, one at a time.
Tested ethernet cablingAll equipment functioning.
Tested Wireless access:
Removed all ethernet cabling
All devices, including IOS devices, access the Wireless Network perfectly EXCEPT any placed in the north end of the house. Those perform exactly as they did in step 3.3.2.
Connected all ethernet cabling.
Plugged Airport Express into socket in the Network Hardware room at the south end of the house. I get exactlyt the same results as before. The lovely green light glows on the Airport Express. Airport Utility reports Airport Express cannot find the Wireless network and also says there are no base stations connected to the internet.
Still in Network Hardware room, I attempt to find other base stations by cabling the Airport Express to the MacBook Pro
Airport Utility shows Airport Express with a green light
I double click the Airport Express Icon
Box says connection is average and status is (green light) Extended Network.
I click Edit
I go through each tab. I note that in the Wireless tab, the Network Mode is as I had set it, "Extend a wireless network".
Under the Network tab I note that "Enable Access Control" is as it should be, NOT selected.
Under the AirPlay tab, I note that "Enable airPlay" is selected.
I click cancel and leave the Edit screens.
Curious to know if Airport Express can find the Wireless network now that the device claims to be functioning as an extended wireless network, I disconnect the ethernet cable from the Airport Express.
I watch the Airport Utility screen closely. Nothing is happening.
With bated breath, I double click on the Airport Express icon.
The popup box shows "extended wireless network"
I click on edit and we start the whole mess over again. (See 1.1-9. above)
Curious to know if cabling the Airport Express to the iMac (almost to middle of house) will offer hope and prosperity to IOS devices at north end, I unplug the Airport Express and carry its now-exhausted little body to the iMac, ethernet cable in hand.
As I unplug the iMac from its ethernet access, I'm informed by Cranky Boy that no way is he going to accept that as a reasonable solution to his problem. He will not live wireless while even one ethernet cable is poking up through a floorboard.
Cranky Boy is reassured when informed that, though the Airport Utility shows the Airport Express connected, merely double clicking on the icon produces the same result as laboriously described in 1.1-9. above.
After quieting Cranky Boy by reconnecting the iMac to the Ethernet, I return the Airport Express to the Network Hardware room.
Again, curious to know ... I reconnect the Airport Express to the MacBook Pro. I want to know if it will exrtend the Wireless network from its position one foot from the Wireless Network.
I close and reopen Airport Utility (as I always do, but forgot to write)
I click on the Airport Express icon (which bears a little green light like the other big boys).
BUT THIS TIME, when I click on the Airport Express icon, the pop-up box says my connection is Excellent, the green light status shows, "Extended Network" and clicking on "Extended Network" produces the same old `Airport Express was unable to extend the Wireless Connection.
I click on the Edit option.
I buzz through all the tabs. I cancel instead of update, leaving everything as it was (as I did the first time)
I decide to go back into edit and select "Internet Options" under the "Internet" tab.
Since I have no idea whatsoever as to what IPV6 is and what it governs, I decide to configure IPV6 to Automatically Connect and then, with a whole new set of opportunities, I leave IPV6 Mode set to "Tunnel" and then I learn that I will get to see what happens when "Enable IPV6 Connection Sharing" is enabled.
I check the other tabs to see if anything has changed in their menus
Jesus Saves and so did I.
Apple updates and so did I.
I am warned that my device and its network services will be temporarily unavailable if I continue.
It seems unaware that I am laughing uncontrollably at the suggestion that my device and its services will be TEMPORARILY AVAILABLE. What? An improvement in performance is warned?
Life continues and so do I.
I breathe deeply to decrease my adrenaline.
Airport Utility flashes a red warning next to the Airport Express Icon and then quickly rethinks the matter and decides to show it as connected.
I click on the Airport Express Icon. This time my connection is only "good".
I click on Extended Network. With a new-found consistency it informs me that my device is unable to extend the Wireless network and it chats with me about using the same Wireless password for my device that is used for the Wireless network access. I did. It is.
I change my settings back to the way they once were, I save like Jesus and Update like Apple
I decide to go back into Edit and modify the settings under the Wireless tab, changing from "Extend Wireless Network" to "Join Wireless Network".
I save.
I click on the Airport Express Icon. My connection has degraded further to "Average"
I click on edit just to see what will happen, but no further information is forthcoming. Settings are as I left them.
I wonder if the Airport Express would extend itself now that it has joined the Wireless Network.
I click the Airport Express Icon.
I click Edit
I change the Network Mode from "Join a Wireless Network" to Extend a Wireless Network. Unfortunately, there was no option for "don't forget where the Wireless Network is!"
I am still "unable to extend the Wireless network"
I disconnect the Airport Express from my MacBook Pro.
After closing and opening Airport Utility, I sit and stare at the Airport Express Icon.
It has no light or error messages
It has a yellow triangle with exclamation point
It has no light or error message
It has a yellow triangle with exclamation point
I finally decide to see what THIS error messages says. It says Device Not Found. Patti Harada's AirPort Express was previously part of your network. Check that it is still in range of your network and is plugged into a power outlet. Click Forget to remove this base station from this network."
I click "Forget". Airport Utility has forgotten the Airport Express ever existed. It has also forgotten how to find it again.
I, however, am unable to forget how much I shelled out for this POS and fear I will never recover from working this intensely and tediously on documenting something so hideously inconsistent in its test results.
I wonder if I should recable the Airport Express to my MacBook Pro
I decide I've had about enough.
I document this ad nauseum in the hopes that someone can read it THOROUGHLY and offer me a solution to my problem. What is my problem? I am so busy fighting off Alligators that I forgot I only came in to drain the swamp! Ah, but I remember now: Cranky Boy can't watch Netflix on his iPad (2nd generation) in the north end of the house.
Any solution that works will do. I'll buy another piece of whatever kind of equipment you think best.

Well, aren't you all that and a bag of chips!!!!
Oh what a relief! What a RELIEF!
That just cleaned up my life. And Cranky Boy is actually smiling!!!
Houston, we've got dots AND BARS!!!
P.S. All my firware and software are always current. If I spent as much time looking for a reset button as I spend checking for software updates, I mighta not needed to work at this!!!!
P.P.S. Airport Utility shows Cranky Boy's iPad as the Airport Express' Wireless Client!!! Who knew?
Thank you so much, m'Lord. I am in your debt. What would you have me do?
Patti in Tucson AZ

Airport express will not update firmware.

The unit works fine, it's about one month old. Every time I open up the airport utility it says that 'This Airport Express should be updated to the latest firmware. Current version: 7.4.1 Available version 7.4.2" I've run this update at least four times and every time it completes 'successfully.' Upon returning to the airport utility mainpage, it just says the same thing again. It's just stuck at 7.4.1.
Any ideas?

Welcome to the discussions!
I've been able to fix this issue in the past by doing a factory default reset on the AirPort Express and then updating the firmware before reconfiguring the device.
To do this, power down the Express
Hold in the reset button and keep holding it in as you plug the device back into power
Release the reset button after approximately 10 seconds
You can also return the device to factory defaults when it is selected and you have AirPort Utility already open. From the Base Station menu at the very top of your screen up by the Apple icon, select Restore Default Settings
It might be a good idea to temporarily connect an ethernet cable from you computer to the Express to help AirPort Utility "discover" the device once you have done the reset.

I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility?

I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility? Most of the discussions involve an existing wireless network. I don't have one.

Correct. That's the way to set up the AirPort Express. After connecting your AirPort Express to the router, open AirPort Utility (in /Applications/Utilities) and follow the steps

I have a 5 year old Dell PC and purchased the Airport Express last year. After one of the iphone 4s updates I lost the contact and cannot reestablish. I have even tried to hard wire from my router to the airport express and I cannot connect.

I have a 5 year old Dell PC and purchased Airport Express last year. I used my iphone 4s to connect and it has been working until recently I lost connection after one of the iphone updates. I cannot make contact with the unit. I have even used an ethernet cable that I hooked to my router and still won't work. I cantinually get this message from Airport Utility. An error has occurred and I can not do anything else.

If you have the AirPort Express setup in Bridge Mode, try changing the Connection Sharing setting to "Share a public IP address"
AirPort Utility - Manual Setup
Click the Internet icon
Connection Sharing = Share a public IP address
Update
You will probably get a message about a Double NAT error. Click to "ignore"
This setting might allow mutliple devices to connect and may not. It's worth a try...I have about a 60-70% success rate at hotels with this setting.
Unfortunately, as you note....hotels have become a lot smarter about connections to their network. At some point, they probably will not even allow another router to connect at all.

Why won't Airport Utility recognize my Airport Express? I'vetried re-booting router, Modem, reset button etc. It was working fine until I was asked to do an update. I got the Airport Express to stream Itunes to external Audioengine 5 speakers. 3 hrs!

I have tried everything for over 3 hrs. I purchase really good Audioengine speakers and an Airport express. Everything was streaming fine via Itunes until I was prompted to do an update yesterday. Now Airport Utility won't recognize the Airport Express. I tried everyhing. I have an older Mac desktop and simply wanted to stream music to the remote speakers. I tried reet button on the Airport express, re-booted my computer, modem, wireless router. Help!

Be sure you performed the "hard reset" correctly. The following is an excerpt from Resetting an AirPort Base Station or Time Capsule FAQ
Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
Release the button, and the AirPort Base Station or Time Capsule will hard reset.
... but read the entire document to ensure you do it correctly. An Express that has been "hard reset" will create an open network with the name "Apple Network nnnnnn" where nnnnnn = the last few digits of its MAC address. Select that network.
If you do not see the network in your Mac's Wi-Fi menu with that name, the "hard reset" did not take effect, which will happen if you do not hold its little reset button depressed long enough. In that case do it again.
Following the "hard reset", reconfigure your Express.

After updating to itunes 10 i now get an error message saying there is a problem with the windows insaller package - I have tried all the suggestions but nothing works for me - have I lost all my itunes forever?

After updating to itunes 10 I now get an error message that says there is a problem with the windows installer package. I have tried all the things that others suggested but cannot download itunes at all now. Have I lost itunes forever?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Lost all contacts and data after update iOS 7.1.2, how to recover all the data?

lost all contacts and data after update iOS 7.1.2, how to recover all the data?
it's very important to me...

Restore from your last backup file.

I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
Temporarily disable wireless encryption.
If you are hidding the SSID, disable that feature.
Change the Mode Select setting to: 802.11g Only
Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11

HT201577 I changed the network name on my time capsule and lost my airport express...how do I get it back?

I changed the network name of my time capsule and lost my airport express in the process.... I have tried all of the resets (soft/hard/factory default) suggested in other answers to people but cannot locate the network of my airport express. It just keeps flashing amber. I want to add it back to my time capsule to extend my network as it was before I reset the name. HELP

Which model of AirPort Express do you have?
If you are not sure, the model number is on the side or bottom of the Express. Hard to see.....you may need a magnifying glass. The model number starts with an "A" followed by four numbers.
Post back with that info.......if you want to get the Express set up again to work with the Time Capsule.
You do have another option as well, although you will have to think in reverse on this one.
Change the network name back to the original name on the Time Capsule, so the Express will work correctly on the network.
Now, change the network name on the AirPort Express. It will be blinking amber when you do this, so power it off.
Then, change the network name on the Time Capsule and let it restart.
Now, power up the AirPort Express and it will join up with the Time Capsule network since you have already programmed it with that information.

I lost the airport express icon after updating to iTunes 11.0.3

Similar Messages

Maybe you are looking for