I lost the configuration when the power supply is shut down

Hello, i have a problem with a linksys wireless model wrt54gs. When the power suply is off all the configuration is lost. How i can fix that problem?.

I'm having exactly the same problem with a WAP54G that purchased 2 days ago:
I set and used fine within 2 mins of opening shrink wrap. The next day we have a powercut. After power was restored the AP was broadcasting using its factory SSID and default WPA security setting. The Setup Wizard status showed the settings that I had entered BUT admin password was not recognised, neither was "admin" so I couldn't change settings.
I Googled for reset to factory defaults - 60sec press of reset with power on, 15sec power off. Setup wizard confirmed that factory defaults have been restored.
I then used the Web interface to configure - changed SSID, wireless security setting and admin password. Everything ok again.
This morning find that SSID and wireless security settings are set back to default but strangely NOT the admin password. There are no other signs in the house of a power outage, the AP has just lost some of its config.
What is going on?

Similar Messages

How to use the Camileo H30 with Power Supply

Hello
First: excuse my english, im from germany ;)
I have a Camilio H30. its was boughted used. I only got the camcorder & the original battery.
no extras (like usb cable or original power supply)
what i want: i need to film over some hours. The Battery cant make it. so i wanna use it with a power supply but when i put it in (throughh the mini usb a connector) the camcorder goes to charing mode (no actions are possible) but i want to use it fully functionality when power supply is connected.
how do i handle it ??
i got a power supply with 5V an 2,25A , i think its enough... or not??
The Label on the bottum side from the camcorder tells me 5V 2A....
Thanks 4 helping me :D
greetz

oh ok i thought this is possible because in the main manual at the part when the display icons being explaind they show a full, half-full, emtpy- battery and a power connector icon. they call it "gleichstrommodus" sorry i have only the german manual. in english it should be co-corent flow mode or ac power mode.
im looking for a way to make the cam work with power supply only. i dont want to charge or even use the battery because i film over few hours ago and for that i dont need it.
my old dv cam works when the battery was plugged out with ac adapter only. thats very nice for me.
whatever. if this is not possible i sell this cam and buy another one ;)
thanks for your help !

Safari will lock up on my MacBook Pro. Force quit doesn't help. When I try to restart the computer, I get an error saying Safari cancelled the restart. I have to press the power button to shut down the computer.

While I'm using safari, it will freeze up. When I force quit safari and reopen it, I find that I'm back to where I was when I did the force quit and safari remains locked up. When I try to restart the computer, I get a pop up that says that safari cancelled my restart. I then press the power button to shut down the computer. When I reboot the computer and open safari, I see all the tabs and windows that were opened when this issue began, only this time safari isn't frozen. This problem started yesterday.
Has anyone experienced the same problem? Is there a fix for this problem?

Try Resetting Safari: Open Safari. Cick on the name Safari in the menu bar. In the drop down menu click Reset Safari.

How do i reload 10 4 x when my system will only shut down by holding down the power button. G4 Imac 17"

how do i reload 10 4 x when my system will only shut down by holding down the power button. G4 Imac 17"

Power down, hold the Mouse button AND the Option/alt button down at bootup, that should open the CD/DCD tray & you can insert your Install Disc, as well as giving you boot options.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

The output of a power supply in labview using a Magna Power LXI over RS232 to simulate a periodic voltage.

How can I toggle the output of a power supply in labview using a Magna Power LXI over RS232 to simulate a periodic voltage? Any help would be apreciated?

LXI is Ethernet communication.
Does the power supply have an RS232 port?
Are you looking for an RS232 to Ethernet (LXI) Converter
https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=rs232%20to%20ethernet%20ip
But to simulate a periodic voltage you need to send the SCPI "Source" command to the power supply in a loop.
Changing the Voltage setting in periodic value.
How fast of a periodic voltage do you need?
You may be limited to how fast LabVIEW, Windows and your power supply can respond to commands.
Use VISA writes. It is the same for LXI as it is for RS232. The LabVIEW code would be the same.
After you select the corrent VISA Ref, either a com port or an IP address, LabVIEW does not care if it is LXI or RS232.
From a Magna manual I found
Command Syntax
[SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude] <nrf+>
[SOURce]:VOLTage[:LEVel]:TRIGgered[:AMPLitude] <nrf+>
Examples
VOLT 200
VOLTAGE:LEVEL 200
VOLTAGE:LEVEL:IMMEDIATE:AMPLITUDE 2.5

How can I configure when I touch from up until down in the principal menu or others apps?

I'd like know how I can configure the notification center when you go from up until down of the screen when the iPod is not locked
Thank you for help
PS:sorry for the bad English!!!

hello, does it work when you go into the ''acrobat reader > edit > preferences > general ''& click on the default application option at the bottom? in there reselect adobe's application and confirm this selection...

T400 shake display when plug power supply s.o winxp

Hello everybody
Days ago I installed windows XP prof to thinkpad T400 , I used driver Intel Display Driver for Windows XP and ATI Display Driver for Windows XP but sometimes when plug power supply suddenly display start shake. please help me about of this
thanks a lot

Ok, as an electrical engineer...I have to step in here! LOL
First, these amp rating are for 2 +12 rails. That is why you see a protection of around 15-18A on the +12 rail. That means each Rail is allowed up to 18A lets say for the new Enermax 1.2 version like the one I have.
Now, Lets say 18A for 12V....well as you know the Abit NF7-S uses the 12V for powering the CPU.
Lets say you have a Barton like me and you want it stable at around 2.4-2.5Ghz. You will have to put lets say around 2V to the cpu to get it stable at that kinda speed, specially if you have high FSB like I do. So 12V * 18Amps = 216W ....well the converter on the NFS-7 is really bad, its loss on the step down convertion is probably around 25% along with the PSU lost cuz its not running at 25oC (another 15%)....you will actually only get around 100-120W for the CPU.
Now, if you go into Sandra and see how much a Barton eats up at 2.4Ghz you will see its around 110Watts.
So, if you wanna push more, dont even think about it! Prime Power test fails and your +12 rail will drop as low as 11.60 Volts.
Now, lets say you got yourself a AMD 64 bit chip and you wanna overclock it....I bet it will need more than 110Watts.
So, what im saying is, dont buy nothing less than a 500 Watt PSU!
You really need around 20-22 A on the main +12 along with really really good cooling on the case and PSU so it is running at a 100%.
http://forums.amdmb.com/showindex.php?s=&threadid=287828
i found this quite interesting especially the bit re the power loss turning the 12v into 1.6v or what ever cpu needs

I have changed the configuration of the firefox and I want to change it back

some days ago I have changed the configuration of the my Firefox to have a Firefox with higher speed. But after changing I found that the speed has became slower. I want to change the configuration back to its original setting. Please let me know if there is any way to do it.
may tanks for your helps.
MIMLINUX

Start Firefox in [[Safe Mode]]. When you get to the [https://support.mozilla.com/en-US/kb/Safe+Mode#Safe_Mode_window Safe Mode window] , select '''Reset all user preferences to Firefox defaults''' and then '''Make Changes and Restart'''. You have to be very careful when a site tells you to change Firefox's settings. It may harm your Firefox.

How come when i press the sleep on my MBP it auto shut down?

How come when i press the sleep on my MBP it auto shut down?

Pressing the Power Button brings up a dialog: "Restart Sleep Cancel Shut down (default button).
Teddy Mack; are you just giving the Power Button a light touch, or holding it down?

How do the change management for the configuration of the adapters

Hi all.
How do the change management for the configuration of the adapters, when i transport the software version component from an development system to production system.
For example, for to change the url parameters of adapters soap inside the production system. I will need type, the news values in this system?
Thanks
Best Regards.

There is an option to pass all the paramters except those who changes from
system to system.
for example,
if you are reading from a file from the directory: <SYS>\CREMAS_<TS>.XML
when <SYS> is DEV or QAS or PROD, and <TS> is time stamp,
you can create channel template that read file with file pattern CREMAS_*.XML,
this can save you a lot of work, however, parameters that are diffrent in every system, (in this case the directory DEV,QAS,PROD) you must enter manually in every system.

On my iPad2 the swoosh sound is checked in Settings but neither it nor the jingle when the battery is being recharged now work

On my iPad2 the swoosh sound is checked in Settings but neither it nor the jingle when the iPad is connected for recharging are working. Any ideas ?

Ensure that the mute switch is not activated. If it is not be sure the volume is at a level in which you can hear it. If your still having issues, test the sounds in other applications. If it is affecting multiple things, you may want to attempt a reset by holding the lock/power button and the home button until you see an Apple logo.

The brightness symbol appears on the desktop when the screen is locked on a periodic basis

The brightness symbol appears on the desktop when the screen is locked on a periodic basis

No, the Bluetooth symbol is different. Here is a simple trick that solves many minor glitches...
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
This is equivalent to restarting your computer. No data is lost. Keep it in your bag of tricks for when these things come up.

"AUTO ARCHIVE LOCATION" of the configuration of the SPM module

Hello,
I want to know the option of the "AUTO ARCHIVE LOCATION" of the configuration of the SPM module of the SAP GRC AC 5.3 SP9.
This option saves the log directly in a server directory? Where does it save the log? And what does it save?
Thank you in advance.
Best Regards.
Pablo Mortera.

Hi Pablo,
Please find my response below:
But when we use it, does it desactivate the log file os the SPM in the Database? No, it won't. There is a setting where you can configure that while archiving delete the logs from SPM. If you turn this on then you won't see the logs until you upload the archived logs into SPM. If you keep this option off, it will keep all the logs in SPM as well.
Can I choose a shared domain directory instead of a server directory? Yes, you can as long as it is accessible by the server.
Cheers,
Alpesh

How to deal with the situation when the database change into ms-sqlserver ?

Hi,dear all,
How to deal with the situation when the database change into ms-sqlserver or other database?
Now, i want to build a j2ee project with ORACLE ADF bc,but this project may be used in several diffrent databases for example oracle db,ms db,mysql and so on.however,if i have developer this project in jdeveloper and this project connection was config as a oracle database,and then,can this project be reused for other databases espasially including the model codes? if yes,how should i do?
all who know how to resolve this,tell me pls,thanks.
bruce Li,
China
Message was edited by:
user526724

Hi Paulbin,
Do you want to supply a function-pointer to a DLL so it can call[back] your VI? Here's how it can be done with .NET, though, that solution requires a C compiler. A single "VI_to_function-reference" utility could handle all cases where the callback passes no parameters. Maybe someday somebody will share that dll.
Did you know that LabVIEW can use Events for some COM-signals change? See pic. (Note: DTR is not listed - - )
Another question is another function's prototype is WORD SetTestType(WORD comHandle, bool type1, bool type2, bool type3), I tried to use a boolean control and a Boolean to (0,1) node in labVIEW to pass parameters to CLF, I config the bool input value as U8(according to C++ bool type) and U32(according to WIN32 BOOL type), it dose not help, when I execute the VI, LabVIEW will be disappeare, it seems to be closed, I must start it again.
Could someone has similar experience on this points?
It's easy to crash LabVIEW misusing CLF - maybe there's another reason for the crash besides bool mis-match(?) Do you know which "Calling convention" is required? What type is comHandle? (where does comHandle come from?)
Cheers!
Message Edited by tbd on 03-23-2007 09:34 PM
Message Edited by tbd on 03-23-2007 09:35 PM
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
evt.jpg ‏7 KB

The Messaging Engine failed to retrieve the configuration from the database. Details:"c0002a1f".

Hi All,
We have two BizTalk nodes, from both nodes we are getting this error from today morning, nothings has changed from application end.
Error : The Messaging Engine failed to retrieve the configuration from the database. Details:"c0002a1f".
Warning : Cannot perform encryption or decryption because the secret is not available from the master secret server. See the event log for related errors.
Can you please suggest step where need to check.
I don't have any knowledge where the master secret file saved during installation.
Regards
Suman

Most of the time, master secret server is not backup frequency. Mostly its is done during the time when the servers have been setup. If anything changed between the time the master secret has been backed up and now, then you don't have the correct version
of master secret file backed up. This is why its is always a good practice to backup the master secret periodically and also try restoring in any of the test server to verify the backed up file is correct and also to make us conformable in restore
process.
You have one option now, try restoring with the file what you have (4 years old). If the backed version is not the correct version, then only option is to reconfigure the BizTalk.
MSDN: How to Restore the Master Secret
You cannot backup the master secret file now as ii could have been corrupted. That the reason we're suggesting to restore the corrupted master secret file. For your future reference, following the steps as suggested in this article to take backup of master
secret.
MSDN: How to Back Up the Master Secret
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

I lost the configuration when the power supply is shut down

Similar Messages

Maybe you are looking for