I lost the Development Panel on right side. Only Histogram shows.

I am using LR5 and it has been working for me pretty well but today I may have accidentally clicked on something that resulted in the loss of those Development panels. Only the Histogram shows. I wish to restore all the missing panels.  I was too afraid to check on various things in the Toolbar (such as Settings, View, etc) and at any rate now the Toolbar has also disappeared. In short, I cannot do any post processing of my RAW files.
I am using an Intel Mac OS X 10.7. Any help would be much appreciated.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

  • I have lost the develop right side column where i can do all my corrections. I am on a mac. I am in quick develop, or nothing.

    I have lost the develop right side column where i can do all my corrections. I am on a mac. I am in quick develop, or nothing.

    Are you saying you have lost the Develop module--which you can restore by doing a right-click on the top menu and putting a checkmark next to Develop:
    Or have you have merely set the righthand panel to auto-hide and can undo this by clicking the little arrow at the right:

  • I am on a MAC OSX 10.9.5, and using LR 5.7.  I have lost the "Develop" Basic Panel (white balance & color saturation).  How do I get it back?  Every thing else seems to be in place.

    I am on a MAC OSX 10.9.5, and using LR 5.7.  I have lost the "Develop" Basic Panel (white balance & color saturation).  Every thing else seems to be in place.  How do I get it back?

    This is one of the most commonly asked questions in this forum. See this.

  • I HAVE AN ISSUE WITH THE BATTRY PAR UP RIGHT SIDE OF MY BOOKPRO

    I HAVE AN ISSUE WITH THE BATTRY PAR UP RIGHT SID OF MONITOR, WHEN EVER ITS FULL CHARGED ITS SHOWING ME SOME TIMES IT WILL SERVE ME LIKE 5  HOURS AND SOME MOST OF THE TIMES ONLY 2- HOURS IF I DO RESTART MY LABTOP SEVERAL TIMES ITS SOLVED PLEASE HELP .ITS ANNOUING ME SO MUSH ,
    I DID MAKE TWO TIMES THE REPAIR OF HARDISK AND THE PARMESSION BUT THE PROBLEM STILL STANDING
    PLEASE HELP

    You should repost your question in the "Macbook Pro Forum" since it appears to be a hardware problem.
    Hope this helps

  • I lost the desktop on my screen, now only two icons

    i lost the desktop on my monitor.
    now only two icons upper right.
    my mac book pro desktop is ok
    help please

    Try this:
    Restart, using the power button if you cannot reach the item in the Apple menu.
    When you hear the chime immediately hold these four keys down: command, option, p and r. All four keys together - you may need to use both hands. Keep holding the keys down and let the Mac chime two more times. Release the keys.

  • HT3180 hi guys, have lost the menu on my apple tv, only gives me computer and settings, its onlu 5 months old, can anyone help me please

    hi guys, have lost the menu on my apple tv, only gives me computer and settings, its onlu 5 months old, can anyone help me please??

    I called Apple support, no support. Called my Internet support, no support. If your Apple TV is connected up to your Internet via wireless...... hard wire to your Internet turn it on and poof it connects.  Disconnect the hard wire from your Internet and it still will work. For what ever reason my wireless was not cutting it for updating the time and date which seems to be really important to Apple TV.
    Good luck

  • Bridge CS4 - lost panels on right side

    For some reason I lost the panels on the right side of the window in the essentials view. Even the thumbnails do not completely display on the right hand side. (XP PRO)
    I have checked preferences, but do not see an option to change this display.
    Screen capture is http://www.pbase.com/choco1/image/109819689
    Suggestions?

    Curt, this is a version of the same problem I am having.
    Mogur203, if you also click on View and Grid Lock, let me know if this setting also disappears.

  • How to hide/unhide the Develop panels

    all my sliders disappeared on the develop
    how do i restore them
    like temp, tint, ect
    stupid i cant do this solo
    Message title was edited by: Brett N

    Press <Tab> on your keyboard.
    Also, there is a small grey triangle about halfway up on the very right of the screen that - when you click it - toggles the visibility of the side panel.
    Same goes for left side panels and also for other Modules.

  • Switch Inspector panel to right side

    Is there a way to change the location of the inspector panel to the right side instead of the left in aperture 3. I believe you used to be able to do this in aperture 2. By using the key combination shift-I. It doesn't work any more.

    Menu View>Inspector>Swap Position.

  • The close button and right side scroll bar are gone, if I minimize the screen I can see them.

    Looking at my screen, the firefox home page & all other websites I bring up, my right side of the screen (where the close X button is and scroll bar is lost behind that side of the screen.
    Looking at my screen, I cannot see the right side of my screen where the X(close button), search button, scroll bar should be.
    When I minimize the screen to a smaller version, I can see the whole page screen, X button, scroll, everything on the right side?

    PTarsa,
    Select System Preferences...>General>"Show scroll bars:" ✓ "Always"

  • How do I get rid of the dotted line on right side of bounding box

    Ever since I upgraded to CS5, I seem to have a broken dotted line along the right side of the bounding box of the png logo that was created for my company.  It wasn't there before. I've gone back to my original back up of the logo and this broken line is in all the versions now.
    Whenever I use the artwork a single dash/dotted line is left on the far right, where the right vertical line of the bounding box would have been. You can see it in the image below on the right.  Its a faint white line but when printed on a banner its stark white.  The line falls just above the last "A" in Alberta.
    I can use Illustrator and Photoshop basics and but have trouble when I get into problems like this.
    Can anyone help me figure out why its there and how to get rid of it?
    I would appreciate any help!
    Thanks.

    Wade and Monica,
    Thanks for your help.
    Wade, it hit me when you asked "why is it a png" file and I realized that I was using the wrong file.  Sometimes its hard to see the forest for the trees!  Problem for banner artwork fixed and I have now used the correct logo file so no more dotted line.
    The dotted line only appears on the the png version of the logo.  There's no coloured background on the logo file.  She gave me the file as both an eps and a png file. I'm pretty sure she created the logo in Illustrator.  I've been using the png file for the website, which is what I thought it worked well for.  And the eps one for my print materials.
    I have no clue why I grabbed the png instead of the eps logo file I usually use, but thanks for pointing out the obvious since I wasted time trying to fix it and was getting very frustrated at what had suddenly gone "wrong".
    I still have that dotted line on the png file of the logo but I'll have to figure that out another day.
    Thanks again!
    Hasmi

  • The bottom part of display whiter than the rest, white on right side more brownish

    So I got a new replacement of my Thunderbolt Display, this time the one I got is straight (previously left side was lower than the right side), however I can see in new one that the bottom part of the display seems to be more white (you can see a slight horizontal line at the bottom) and also on the right side of the display white colour seems to be more brownish.
    I have been wondering if that is acceptable for Thunderbolt monitor? Is that a backlit bleed on white? Can you see anything on the photo I have made or am I going slightly mad?:) Please help.

    The display uses LED technology which means there will be some bleeding or clouding of light on dark backgrounds (mostly from the edges).  You should not have any brown color on the right side as your image shows unless perhaps you need to make some adjustments on your graphics card.  I use mine with a 2012 Mini and it has good colors.

  • When selecting "bookmark this page" the location select window right side and bottom are cut off, no visible buttons

    After I select "bookmark this page" from the bookmarks menu, and then select "show all the bookmarks folders" with the pulldown arrow, the bookmarks folder list appears but the right side and the bottom are cut off so that no buttons are showing. Trying to resize the window does not work. Double clicking on the desired folder selects the folder name for editing, however, the caption at the top says "bookmark saved" and sometimes it is actually where I would like it to be added.

    After finding that I did not have a chrome folder, or userchrome.css file, I installed ChromEdit Plus. Through this app I was able to create a chrome folder and the userchrome.css file using the information from finitarry. The problem still existed. I then edited userchrome.css changing the values to "min-width:800px !important; min-height:800px !important; " The results were; same problem, just bigger. This code changes the folderview pane in the add bookmarks window. The problem is the pane expands larger than the window. Let me see if I can clairify, When you select "bookmark this page" the add bookmark "window" opens. to open the folderview pane, click on the down arrow to the right of the folder pulldown menu. The window is not expanding to contain the pane correctly and pushes all the other controls off the screen.

  • INTERNAL MIC. RIGHT-SIDE ONLY?

    I-Chat without camera or additional equipment, internal microphone audio comes out of the right-side built-in speaker only.
    Checked PREF/SOUND/BALANCE ... center position.
    Everything else works, I-TUNES, TIME ANNOUNCEMENT, DVD/CD'S.
    Is the Internal Mic. STEREO? Thanks.

    Hey thanks for the reply , Ralph!
    We have been still getting overr the shock of the DISK UTILITY REPAIRS PERMISSIONS problem of a few weeks ago.
    My family and I had not used ichat for a while, and my sister noticed , one, that we did not have to adjust downward the input and output volumes of PREF/SOUND in order not to contend with feedback, as we had done before, when we first had experimented with ichat for the first time,and two, she then brought to my attention, that when we adjusted the "balance" from center to left, no sound at all was heard with ichat. Moving the fader back to center, or all the way to right, was sound but only right side.????
    ...they didn't have download something again that needs repair, did they?

  • Ipod playing through right side only

    I have a 3rd generation iPod nano, and I noticed recently that no matter what i plug into, whether it be headphones, a 1/8" jack to a car receiver or radio, only the right side will play. Is there a setting somewhere that controls which side the music plays, or a centering option? Any help would be greatly appreciated

    You have a defective headphone jack. You will need to get it serviced.

Maybe you are looking for