I Lost the Subtitles

I have saved with dvd shrink 3.2 to hard disk many VOB files, this files have: Video, audio and subtitles.
When I add this files to a dvd encore project like a time line, I lost the subtitles.
Somebody can tell me as he is possible this?
Thanks to everybody

It may be possible to extract the subtitles from the .vob files and "massage" them into image subtitles with a text timecode script. You could check videohelp.com and doom9.org to see if there are tutorials and tools available on this subject. (You will still need to read up in Encore's help to check the specs of the image and script formats needed!)

Similar Messages

  • Hp laserjet 400 mfp can't scan, i lost the installati​on cd

    Hello,
    i have a hp laserjet 400 mfp and i can't scan.
    I have Windows 7 and the printer works just fine with the W7 software, but the scan option is not available, because the software installs only the printer, not the scanner.
    I lost the installation cd and the installation software from hp support only install the printer , not the scanning option. Please help.  
    I also tried the e-mail scanning software from hp, but i don't know if it works , because i don;t know how to set the settings.
    Thank you.

    Hi, thank you for your answer. I tried with the full software you gave me in your link, but it was no good, because my printer is a Laserjet 4100 MFP, and the software was asking for an usb device, wich my printer is not...
    I don't need the driver for the printer, i have that driver, but that driver sees the MFP like a simple printer, without scanner, so, the scanner remains usefull. I need the full software or the CD.
    I don't receive an error, i just need the full software for Laserjet 4100 MFP. I didn't find it on HP's website, unfortunately and i don't have the installation CD anymore, cause i lost it....
    Thank you.

  • Lost the content code for free up gradation of mountain lion. What to do ???

    Lost the content code for free up gradation of mountain lion. What to do ???

    https://discussions.apple.com/thread/4134740
    Thread /w same question

  • I lost the dial up connection dialog box. I unchecked a check item in the dial connetion box. How do I get the dial up connection back?

    I established a dial up connection by updating to automatic the remote managers and telephony in administrative tool services area on my XP system according to firefox help instructions.
    At first I had a dial up connection but I unchecked an item in the
    dial up connection box. I am not sure what I unchecked or toggled
    off. I then lost the dial up connection. I need to get the dial connection dialog box back. What needs to be done
    Thank you.

    I see no direct connection.. a printer and the computer setup for internet are not related.
    But it sounds like the router in the wife's office is now in the wrong mode..
    If you have an existing main router replace the second router for a switch .. that is the easy way.
    Otherwise you need to bridge the router if it has that option.. most do not. Or use wan bypass.. where you turn off the dhcp server in the router and fix its ip to match the range of the main router.. this is the hassle of using router as a switch.
    BUT I am making a huge number of assumptions.
    What I need is the full network layout.. a quick picture would help.
    I need main modem.. main router.. (maybe same box or different).. make model and current IP address and how dhcp is setup.
    I need secondary router.. if that is what it is, IP and settings.
    I want the printer type and model. How it is connected.
    BTW I much prefer to see a network printer plugged into the network rather than usb.. it is only a matter of sorting the IP settings and driver pointing to the network rather than local.
    Or you should think of it as a broken washing machine and call the technician.. who could fix the whole lot in an hour.

  • I lost the installation disks for CS4 master collection. Where can I download the installation file?

    Hello,
    I lost the installation disks for CS4 master collection polish version. Where can I download the installation file?

    Hi filmowka,
    Welcome to the Community!
    Go to http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and choose Master collection CS4 from the list.
    Follow the Very Important Section else the download will not start.
    Thanks!
    Ankit

  • I had a drive failure and lost the iWeb file along with other things.   I did manage to save a lot of user file documents but I don't see or   recognize the my iWeb site file. It was on a 15" G4 Titanium pb. I'm trying to find a way, using version 2.0.4

    I had a drive failure and lost the iWeb file along with other things. 
    I did manage to save a lot of user file documents but I don't see or 
    recognize the iWeb site file. It was on a 15" G4 Titanium pb.
    I'm trying to find a way, using version 2.0.4 of iWeb on a different 
    pb to recover the file into the iWeb app or a way to download the site into iWeb.
    There are 6 pages of images and text, and it 
    would be a task for me to recreate the whole thing again. I did 
    download the site but I don't know how or if I can get iWeb to see it and open it.
    Does anyone have any knowledge about this? The link to my site:
    <http://web.mac.com/danauerbach>
    Any suggestions will be most appreciated.
    dan auerbach
    [email protected]

    Unfortunately iWeb cannot read or import previously published files, only generate them.  You'll have to recreate your site from scratch.
    However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
    OT

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • TS3694 iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)

    this issue , happen to my iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)
    Sudden screen : USB pointing to iTunes . it shows that it need a restore and update .. after downloading the software
    and extracting .. found Error1 at the point Verify firmware . AGAIN AND
    and this is the log ..
    2014-08-11 15:46:30.611 [4472:1648]: restore library built Feb 12 2014 at 16:27:17
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: iTunes 11.3.1.2
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: Software payload version: 11D257 (option key)
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: Using MobileRestore state machine
    [13:47:25.0555] Changing state from 'Idle' to 'Restoring'
    [13:47:25.0555] device software does not support nonce generation
    [13:47:25.0555] requested restore behavior: Erase
    [13:47:25.0570] requested variant: Erase
    [13:47:25.0570] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 061FEA80 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 061FD2E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0BA32F38 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:47:26.0569] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
    [13:47:26.0569] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
    [13:47:27.0068] amai: tss_submit_job: HttpQueryInfo returned 200
    [13:47:27.0286] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    [13:47:27.0286] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
    [13:47:27.0318] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
    [13:47:27.0333] <DFU Device 0562C260>: production fused device
    [13:47:27.0333] requested restore behavior: Erase
    [13:47:27.0333] device software does not support nonce generation
    [13:47:27.0349] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
    [13:47:27.0349] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
    [13:47:27.0364] <DFU Device 0562C260>: operation 0 progress 2
    [13:47:27.0380] <DFU Device 0562C260>: operation 0 progress 5
    [13:47:27.0396] <DFU Device 0562C260>: operation 0 progress 8
    [13:47:27.0411] <DFU Device 0562C260>: operation 0 progress 10
    [13:47:27.0427] <DFU Device 0562C260>: operation 0 progress 13
    [13:47:27.0442] <DFU Device 0562C260>: operation 0 progress 16
    [13:47:27.0458] <DFU Device 0562C260>: operation 0 progress 18
    [13:47:27.0474] <DFU Device 0562C260>: operation 0 progress 21
    [13:47:27.0489] <DFU Device 0562C260>: operation 0 progress 24
    [13:47:27.0505] <DFU Device 0562C260>: operation 0 progress 26
    [13:47:27.0520] <DFU Device 0562C260>: operation 0 progress 29
    [13:47:27.0536] <DFU Device 0562C260>: operation 0 progress 32
    [13:47:27.0552] <DFU Device 0562C260>: operation 0 progress 34
    [13:47:27.0567] <DFU Device 0562C260>: operation 0 progress 37
    [13:47:27.0583] <DFU Device 0562C260>: operation 0 progress 40
    [13:47:27.0598] <DFU Device 0562C260>: operation 0 progress 42
    [13:47:27.0614] <DFU Device 0562C260>: operation 0 progress 45
    [13:47:27.0630] <DFU Device 0562C260>: operation 0 progress 48
    [13:47:27.0645] <DFU Device 0562C260>: operation 0 progress 50
    [13:47:27.0661] <DFU Device 0562C260>: operation 0 progress 53
    [13:47:27.0676] <DFU Device 0562C260>: operation 0 progress 56
    [13:47:27.0692] <DFU Device 0562C260>: operation 0 progress 59
    [13:47:27.0708] <DFU Device 0562C260>: operation 0 progress 61
    [13:47:27.0723] <DFU Device 0562C260>: operation 0 progress 64
    [13:47:27.0739] <DFU Device 0562C260>: operation 0 progress 67
    [13:47:27.0754] <DFU Device 0562C260>: operation 0 progress 69
    [13:47:27.0770] <DFU Device 0562C260>: operation 0 progress 72
    [13:47:27.0786] <DFU Device 0562C260>: operation 0 progress 75
    [13:47:27.0801] <DFU Device 0562C260>: operation 0 progress 77
    [13:47:27.0817] <DFU Device 0562C260>: operation 0 progress 80
    [13:47:27.0832] <DFU Device 0562C260>: operation 0 progress 83
    [13:47:27.0848] <DFU Device 0562C260>: operation 0 progress 85
    [13:47:27.0864] <DFU Device 0562C260>: operation 0 progress 88
    [13:47:27.0879] <DFU Device 0562C260>: operation 0 progress 91
    [13:47:27.0895] <DFU Device 0562C260>: operation 0 progress 93
    [13:47:27.0910] <DFU Device 0562C260>: operation 0 progress 96
    [13:47:27.0926] <DFU Device 0562C260>: operation 0 progress 99
    [13:47:27.0926] WinDFU::UploadData: EOF, cbRead: 554
    [13:47:27.0942] <DFU Device 0562C260>: operation 0 progress 100
    [13:47:27.0942] WinDFU::UploadData: ZLP
    [13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    [13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    [13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    [13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    [13:47:30.0968] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    [13:47:30.0968] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    [13:47:30.0968] WinDFU::ResetDevice: resetting...
    [13:47:31.0046] WinDFU::FinalizeDfuUpdate: success
    [13:47:31.0046] <DFU Device 0562C260>: DFU succeeded
    [13:47:31.0046] Finished DFU Restore Phase: Successful
    [13:47:31.0218] DFU mode device disconnected
    [13:47:31.0218] Device removed when in state Restoring, moving device to transition state
    [13:47:31.0218] Changing state from 'Restoring' to 'Transitioning'
    [13:47:31.0218] Creating timer to monitor transition
    [13:47:32.0175] DFU mode device connected
    [13:47:32.0175] Transitioning device returned, continuing restore.
    [13:47:32.0175] Canceling timer
    [13:47:32.0175] Changing state from 'Transitioning' to 'Restoring'
    [13:47:32.0175] AppleDevice::GetDeviceID: failed for iBoot
    [13:47:32.0175] requested restore behavior: Erase
    [13:47:32.0175] requested variant: Erase
    [13:47:32.0175] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 061FDC70 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 061FE378 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0B9D5148 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0B9D5190 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0B9D51D8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0B9D5220 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0B9D5268 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0B9D52B0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0B9D52F8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0B9D5340 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0B9D5388 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0B9D53D0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0B9D5418 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0B9D5460 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0B9D54A8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 06266350 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 06266398 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 062663E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 064698C8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:47:33.0064] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
    [13:47:33.0064] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
    [13:47:33.0298] amai: tss_submit_job: HttpQueryInfo returned 200
    [13:47:33.0501] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    [13:47:33.0501] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
    [13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "iBSS" has been previously personalized; skipping it
    [13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "LLB" has been previously personalized; skipping it
    [13:47:33.0517] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
    [13:47:33.0532] <DFU Device 0BA2A9D8>: production fused device
    [13:47:33.0532] requested restore behavior: Erase
    [13:47:33.0532] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:33.0532] AppleDevice::GetDeviceID: failed for iBoot
    [13:47:33.0532] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
    [13:47:33.0532] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
    [13:47:33.0564] <DFU Device 0BA2A9D8>: operation 0 progress 0
    [13:47:33.0579] <DFU Device 0BA2A9D8>: operation 0 progress 1
    [13:47:33.0595] <DFU Device 0BA2A9D8>: operation 0 progress 2
    [13:47:33.0626] <DFU Device 0BA2A9D8>: operation 0 progress 3
    [13:47:33.0642] <DFU Device 0BA2A9D8>: operation 0 progress 4
    [13:47:33.0657] <DFU Device 0BA2A9D8>: operation 0 progress 5
    [13:47:33.0688] <DFU Device 0BA2A9D8>: operation 0 progress 6
    [13:47:33.0704] <DFU Device 0BA2A9D8>: operation 0 progress 7
    [13:47:33.0735] <DFU Device 0BA2A9D8>: operation 0 progress 8
    [13:47:33.0751] <DFU Device 0BA2A9D8>: operation 0 progress 9
    [13:47:33.0766] <DFU Device 0BA2A9D8>: operation 0 progress 10
    [13:47:33.0798] <DFU Device 0BA2A9D8>: operation 0 progress 11
    [13:47:33.0813] <DFU Device 0BA2A9D8>: operation 0 progress 12
    [13:47:33.0844] <DFU Device 0BA2A9D8>: operation 0 progress 13
    [13:47:33.0860] <DFU Device 0BA2A9D8>: operation 0 progress 14
    [13:47:33.0876] <DFU Device 0BA2A9D8>: operation 0 progress 15
    [13:47:33.0907] <DFU Device 0BA2A9D8>: operation 0 progress 16
    [13:47:33.0922] <DFU Device 0BA2A9D8>: operation 0 progress 17
    [13:47:33.0954] <DFU Device 0BA2A9D8>: operation 0 progress 18
    [13:47:33.0969] <DFU Device 0BA2A9D8>: operation 0 progress 19
    [13:47:33.0985] <DFU Device 0BA2A9D8>: operation 0 progress 20
    [13:47:34.0016] <DFU Device 0BA2A9D8>: operation 0 progress 21
    [13:47:34.0032] <DFU Device 0BA2A9D8>: operation 0 progress 22
    [13:47:34.0063] <DFU Device 0BA2A9D8>: operation 0 progress 23
    [13:47:34.0078] <DFU Device 0BA2A9D8>: operation 0 progress 24
    [13:47:34.0094] <DFU Device 0BA2A9D8>: operation 0 progress 25
    [13:47:34.0125] <DFU Device 0BA2A9D8>: operation 0 progress 26
    [13:47:34.0141] <DFU Device 0BA2A9D8>: operation 0 progress 27
    [13:47:34.0172] <DFU Device 0BA2A9D8>: operation 0 progress 28
    [13:47:34.0188] <DFU Device 0BA2A9D8>: operation 0 progress 29
    [13:47:34.0203] <DFU Device 0BA2A9D8>: operation 0 progress 30
    [13:47:34.0234] <DFU Device 0BA2A9D8>: operation 0 progress 31
    [13:47:34.0250] <DFU Device 0BA2A9D8>: operation 0 progress 32
    [13:47:34.0281] <DFU Device 0BA2A9D8>: operation 0 progress 33
    [13:47:34.0297] <DFU Device 0BA2A9D8>: operation 0 progress 34
    [13:47:34.0312] <DFU Device 0BA2A9D8>: operation 0 progress 35
    [13:47:34.0344] <DFU Device 0BA2A9D8>: operation 0 progress 36
    [13:47:34.0359] <DFU Device 0BA2A9D8>: operation 0 progress 37
    [13:47:34.0390] <DFU Device 0BA2A9D8>: operation 0 progress 38
    [13:47:34.0406] <DFU Device 0BA2A9D8>: operation 0 progress 39
    [13:47:34.0422] <DFU Device 0BA2A9D8>: operation 0 progress 40
    [13:47:34.0453] <DFU Device 0BA2A9D8>: operation 0 progress 41
    [13:47:34.0468] <DFU Device 0BA2A9D8>: operation 0 progress 42
    [13:47:34.0500] <DFU Device 0BA2A9D8>: operation 0 progress 43
    [13:47:34.0515] <DFU Device 0BA2A9D8>: operation 0 progress 44
    [13:47:34.0531] <DFU Device 0BA2A9D8>: operation 0 progress 45
    [13:47:34.0562] <DFU Device 0BA2A9D8>: operation 0 progress 46
    [13:47:34.0578] <DFU Device 0BA2A9D8>: operation 0 progress 47
    [13:47:34.0593] <DFU Device 0BA2A9D8>: operation 0 progress 48
    [13:47:34.0624] <DFU Device 0BA2A9D8>: operation 0 progress 49
    [13:47:34.0640] <DFU Device 0BA2A9D8>: operation 0 progress 50
    [13:47:34.0671] <DFU Device 0BA2A9D8>: operation 0 progress 51
    [13:47:34.0687] <DFU Device 0BA2A9D8>: operation 0 progress 52
    [13:47:34.0702] <DFU Device 0BA2A9D8>: operation 0 progress 53
    [13:47:34.0734] <DFU Device 0BA2A9D8>: operation 0 progress 54
    [13:47:34.0749] <DFU Device 0BA2A9D8>: operation 0 progress 55
    [13:47:34.0780] <DFU Device 0BA2A9D8>: operation 0 progress 56
    [13:47:34.0796] <DFU Device 0BA2A9D8>: operation 0 progress 57
    [13:47:34.0812] <DFU Device 0BA2A9D8>: operation 0 progress 58
    [13:47:34.0843] <DFU Device 0BA2A9D8>: operation 0 progress 59
    [13:47:34.0858] <DFU Device 0BA2A9D8>: operation 0 progress 60
    [13:47:34.0890] <DFU Device 0BA2A9D8>: operation 0 progress 61
    [13:47:34.0905] <DFU Device 0BA2A9D8>: operation 0 progress 62
    [13:47:34.0921] <DFU Device 0BA2A9D8>: operation 0 progress 63
    [13:47:34.0952] <DFU Device 0BA2A9D8>: operation 0 progress 64
    [13:47:34.0968] <DFU Device 0BA2A9D8>: operation 0 progress 65
    [13:47:34.0999] <DFU Device 0BA2A9D8>: operation 0 progress 66
    [13:47:35.0014] <DFU Device 0BA2A9D8>: operation 0 progress 67
    [13:47:35.0030] <DFU Device 0BA2A9D8>: operation 0 progress 68
    [13:47:35.0061] <DFU Device 0BA2A9D8>: operation 0 progress 69
    [13:47:35.0077] <DFU Device 0BA2A9D8>: operation 0 progress 70
    [13:47:35.0108] <DFU Device 0BA2A9D8>: operation 0 progress 71
    [13:47:35.0124] <DFU Device 0BA2A9D8>: operation 0 progress 72
    [13:47:35.0139] <DFU Device 0BA2A9D8>: operation 0 progress 73
    [13:47:35.0170] <DFU Device 0BA2A9D8>: operation 0 progress 74
    [13:47:35.0186] <DFU Device 0BA2A9D8>: operation 0 progress 75
    [13:47:35.0217] <DFU Device 0BA2A9D8>: operation 0 progress 76
    [13:47:35.0233] <DFU Device 0BA2A9D8>: operation 0 progress 77
    [13:47:35.0248] <DFU Device 0BA2A9D8>: operation 0 progress 78
    [13:47:35.0280] <DFU Device 0BA2A9D8>: operation 0 progress 79
    [13:47:35.0295] <DFU Device 0BA2A9D8>: operation 0 progress 80
    [13:47:35.0326] <DFU Device 0BA2A9D8>: operation 0 progress 81
    [13:47:35.0342] <DFU Device 0BA2A9D8>: operation 0 progress 82
    [13:47:35.0358] <DFU Device 0BA2A9D8>: operation 0 progress 83
    [13:47:35.0389] <DFU Device 0BA2A9D8>: operation 0 progress 84
    [13:47:35.0404] <DFU Device 0BA2A9D8>: operation 0 progress 85
    [13:47:35.0436] <DFU Device 0BA2A9D8>: operation 0 progress 86
    [13:47:35.0451] <DFU Device 0BA2A9D8>: operation 0 progress 87
    [13:47:35.0467] <DFU Device 0BA2A9D8>: operation 0 progress 88
    [13:47:35.0498] <DFU Device 0BA2A9D8>: operation 0 progress 89
    [13:47:35.0514] <DFU Device 0BA2A9D8>: operation 0 progress 90
    [13:47:35.0529] <DFU Device 0BA2A9D8>: operation 0 progress 91
    [13:47:35.0560] <DFU Device 0BA2A9D8>: operation 0 progress 92
    [13:47:35.0576] <DFU Device 0BA2A9D8>: operation 0 progress 93
    [13:47:35.0607] <DFU Device 0BA2A9D8>: operation 0 progress 94
    [13:47:35.0623] <DFU Device 0BA2A9D8>: operation 0 progress 95
    [13:47:35.0638] <DFU Device 0BA2A9D8>: operation 0 progress 96
    [13:47:35.0670] <DFU Device 0BA2A9D8>: operation 0 progress 97
    [13:47:35.0685] <DFU Device 0BA2A9D8>: operation 0 progress 98
    [13:47:35.0716] <DFU Device 0BA2A9D8>: operation 0 progress 99
    [13:47:35.0716] WinDFU::UploadData: EOF, cbRead: 1116
    [13:47:35.0732] <DFU Device 0BA2A9D8>: operation 0 progress 100
    [13:47:35.0732] WinDFU::UploadData: ZLP
    [13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    [13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    [13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    [13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    [13:47:38.0758] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    [13:47:38.0758] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    [13:47:38.0758] WinDFU::ResetDevice: resetting...
    [13:47:38.0836] WinDFU::FinalizeDfuUpdate: success
    [13:47:38.0836] <DFU Device 0BA2A9D8>: DFU succeeded
    [13:47:38.0836] Finished DFU Restore Phase: Successful
    [13:47:39.0039] DFU mode device disconnected
    [13:47:39.0039] Device removed when in state Restoring, moving device to transition state
    [13:47:39.0039] Changing state from 'Restoring' to 'Transitioning'
    [13:47:39.0039] Creating timer to monitor transition
    [13:47:41.0674] Recovery mode device connected
    [13:47:41.0674] Transitioning device returned, continuing restore.
    [13:47:41.0674] Canceling timer
    [13:47:41.0674] Changing state from 'Transitioning' to 'Restoring'
    [13:47:41.0684] requested restore behavior: Erase
    [13:47:41.0684] requested variant: Erase
    [13:47:41.0684] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [13:47:42.0528] iBoot build-version = iBoot-1940.10.58
    [13:47:42.0528] iBoot build-style = RELEASE
    [13:47:42.0528] requested restore behavior: Erase
    [13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0528] requested restore behavior: Erase
    [13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] unable to open device_map.txt: No such file or directory
    [13:47:42.0543] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:42.0543] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:42.0543] AMDeviceIoControl: GetOverlappedResult failed
    [13:47:42.0543] AMDeviceIoControl: pipe stall
    [13:47:42.0543] USBControlTransfer: error 31, usbd status c0000004
    [13:47:42.0543] command device request for 'getenv radio-error' failed: 2008
    [13:47:42.0543] radio-error not set
    [13:47:42.0543] unable to open device_map.txt: No such file or directory
    [13:47:42.0543] <Recovery Mode Device 0555AEB8>: production fused device
    [13:47:42.0543] requested restore behavior: Erase
    [13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] requested restore behavior: Erase
    [13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] interface has 1 endpoints, file pipe = 1
    [13:47:42.0543]
    [13:47:42.0543] <Recovery Mode Device 0555AEB8>: operation 4 progress -1
    [13:47:42.0606] unable to open device_map.txt: No such file or directory
    [13:47:42.0606] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:42.0606] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0606] <Recovery Mode Device 0555AEB8>: operation 42 progress -1
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0621] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:43.0651] <Recovery Mode Device 0555AEB8>: operation 5 progress -1
    [13:47:43.0994] unable to open device_map.txt: No such file or directory
    [13:47:43.0994] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:43.0994] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:43.0994] AMDeviceIoControl: GetOverlappedResult failed
    [13:47:43.0994] AMDeviceIoControl: pipe stall
    [13:47:43.0994] USBControlTransfer: error 31, usbd status c0000004
    [13:47:43.0994] command device request for 'getenv ramdisk-delay' failed: 2008
    [13:47:45.0616] <Recovery Mode Device 0555AEB8>: operation 6 progress -1
    [13:47:46.0630] <Recovery Mode Device 0555AEB8>: operation 7 progress -1
    [13:47:46.0942] <Recovery Mode Device 0555AEB8>: operation 8 progress -1
    [13:47:46.0958] unable to open device_map.txt: No such file or directory
    [13:47:46.0958] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:46.0958] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:46.0958] <Recovery Mode Device 0555AEB8>: operation 9 progress -1
    [13:47:46.0958] <Recovery Mode Device 0555AEB8>: Recovery mode succeeded
    [13:47:46.0958] Finished Recovery Restore Phase: Successful
    [13:47:48.0409] Recovery mode device disconnected
    [13:47:48.0409] Device removed when in state Restoring, moving device to transition state
    [13:47:48.0409] Changing state from 'Restoring' to 'Transitioning'
    [13:47:48.0409] Creating timer to monitor transition
    [13:47:52.0895] RestoreOS mode device connected
    [13:47:52.0895] Transitioning device returned, continuing restore.
    [13:47:52.0905] Canceling timer
    [13:47:52.0905] Changing state from 'Transitioning' to 'Restoring'
    [13:47:52.0905] <Restore Device 05577800>: operation 44 progress -1
    [13:47:52.0905] requested restore behavior: Erase
    [13:47:52.0905] requested variant: Erase
    [13:47:52.0905] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [13:47:53.0792] requested restore behavior: Erase
    [13:47:53.0792] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0792] device did not return saved USB log
    [13:47:53.0792] device did not return saved panic log
    [13:47:53.0792] previous restore failed with exit status 0x100
    [13:47:53.0792] connected to service com.apple.mobile.restored
    [13:47:53.0808] using protocol version 13
    [13:47:53.0808] unable to open device_map.txt: No such file or directory
    [13:47:53.0808] board config = n42ap
    [13:47:53.0808] no value returned for BootArgs
    [13:47:53.0824] _copyDeviceProperty() failed for restore bootargs
    [13:47:53.0824] no value returned for MarketingPartNumber
    [13:47:53.0824] _copyDeviceProperty() failed for mpn
    [13:47:53.0824] requested restore behavior: Erase
    [13:47:53.0824] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0839] value query for 'HardwareModel' returned 'N42AP'
    [13:47:53.0839] <Restore Device 05577800>: operation 28 progress -1
    [13:48:10.0360] previous restore failed: re:INF@ 145] created partition 1 as 'Effaceable'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 2 as 'NVRAM'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 3 as 'Firmware'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 4 as 'Filesystem'
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 4
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 5 as 'System Config'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 6 as 'Diagnostic Data'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 7 as 'Bad Block Table'
    [13:48:10.0360] com.apple.AppleFSCompressionTypeZlib load succeeded
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 7
    [13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x32600000(0x82cc6000)
    [13:48:10.0360] L2TP domain init
    [13:48:10.0360] L2TP domain init complete
    [13:48:10.0360] PPTP domain init
    [13:48:10.0360] AppleSwissPPNFTL started with IOFlashStoragePartition provider
    [13:48:10.0360] [NAND] _FindFlashMediaAndKeepout:601 physical nand block offset 1
    [13:48:10.0360] AppleNANDFTL registered[NAND] start:356 this 0x85e41800 PROVIDER=0x85f2a400 flashMedia=0x85f2a400
    [13:48:10.0360] [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
    [13:48:10.0360] [NAND] WMR_Start:174 FIL_Init  [OK]
    [13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x32800000(0xde3b4000)
    [13:48:10.0360] virtual bool AppleDisplayPipe::start_hardware(IOService *), auto-detect chip
    [13:48:10.0360] [NAND] WMR_Open:371 VFL_Open    [OK]
    [13:48:10.0360] Scaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] void AppleDisplayPipe::setupVideoDownscalingLimits(): minimum-frequency property not found, using getClockFrequency(0) instead.
    [13:48:10.0360] Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] AppleMultitouchN1SPI: successfully started
    [13:48:10.0360] AppleH4CamIn::start - back camera expected
    [13:48:10.0360] AppleH4CamIn::start - front camera expected
    [13:48:10.0360] AppleH4CamIn::power_off_hardware
    [13:48:10.0360] AppleAP3DSH::probe found device with ID: 0x3f
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationMatrix [64699 -1892 -370] [-1570 65035 -244] [849 465 63854]
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationOffsets [518853 -714699 -1661621]
    [13:48:10.0360] AppleAP3DSH::handleStart - No calibration inverse matrix or the data is invalid, Compute locally
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationInverseMatrix [66427 1929 393] [1599 66087 261] [-895 -507 67257]
    [13:48:10.0360] AppleAP3DSH::handleStart _odr400HzSampleInterval = 2440
    [13:48:10.0360] AppleH4CamIn::setPowerStateGated: 0
    [13:48:10.0360] AppleCS35L19Amp: could not allocate control 395
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 0
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType Detached
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] display-scale = 2
    [13:48:10.0360] display-rotation = 0
    [13:48:10.0360] found applelogo at /usr/share/progressui/[email protected]
    [13:48:10.0360] found display: primary
    [13:48:10.0360] display: 640 x 1136
    [13:48:10.0360] found PTP interface
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: iPod USB Interface
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: USBAudioControl
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: USBAudioStreaming
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: IapOverUsbHid
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBEthernet
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
    [13:48:10.0360] IOAccessoryPortUSB::start
    [13:48:10.0360] virtual bool AppleUSBDeviceMux::start(IOService *) build: Jun 11 2014 20:11:28
    [13:48:10.0360] init_waste
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
    [13:48:10.0360] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
    [13:48:10.0360] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
    [13:48:10.0360] AppleBCMWLANCore::init(): IO80211-46 Jun 11 2014 20:10:03
    [13:48:10.0360] [NAND] WMR_Open:420 FTL_Open    [OK]
    [13:48:10.0360] [NAND] _publishServices:642 FTL capabilities: 0x00000001
    [13:48:10.0360] [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks - count: 23 max_count: 23
    [13:48:10.0360] [NAND] _fetchBorrowedList:881 number of borrowed blocks 16
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 0
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 1
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 2
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 3
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 5
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 6
    [13:48:10.0360] 000828.945879 wlan.N[0] AppleBCMWLANCore::start(): Starting with MAC Address: <<<mac address>>>
    [13:48:10.0360] 000828.946182 wlan.N[1] AppleBCMWLANCore::setPowerStateGated():   powerState 1, fStateFlags 0x20, dev 0xc476b000 (this 1, provider 0)
    [13:48:10.0360] 000828.946197 wlan.N[2] AppleBCMWLANCore::setPowerStateGated():  Received power state change before driver has initialized, ignoring
    [13:48:10.0360] IO80211Peer::addPhyStatistics Phy stats started for addr <<<mac address>>>
    [13:48:10.0360] IO80211Peer::addPhyStatistics Tx Completion stats started for addr <<<mac address>>>
    [13:48:10.0360] IO80211PeerManager::initWithInterface cant add monitoring timer
    [13:48:10.0360] Started logging for intf
    [13:48:10.0360] IO80211PeerManager::initWithInterface: inited peer manager
    [13:48:10.0360] IO80211Interface::init peerManager=0x87cb8800
    [13:48:10.0360] start:156
    [13:48:10.0360] start:156
    [13:48:10.0360] AppleARMBacklight::start: No AAP function
    [13:48:10.0360] [effaceable:INIT] found current generation, 90, in group 1
    [13:48:10.0360] [effaceable:INIT] started
    [13:48:10.0360] [effaceable:INIT] started
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49152 62078<-usb->4608
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49153 62078<-usb->4864
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888adec8 established 62078<-lo0->49154 62078<-usb->5120
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49155 62078<-usb->5376
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888adec8
    [13:48:10.0360] recv(13, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade18
    [13:48:10.0360] recv(14, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49156 62078<-usb->5632
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49157 62078<-usb->5888
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49158 62078<-usb->6144
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49159 62078<-usb->6400
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49160 62078<-usb->6656
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49161 62078<-usb->6912
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49162 62078<-usb->7168
    [13:48:10.0360] unrecognized key 'BootArgs' in value query
    [13:48:10.0360] failed to handle value query for key 'BootArgs', sending back empty response
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49163 62078<-usb->7424
    [13:48:10.0360] unrecognized key 'MarketingPartNumber' in value query
    [13:48:10.0360] failed to handle value query for key 'MarketingPartNumber', sending back empty response
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49164 62078<-usb->7680
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] client protocol version 13
    [13:48:10.0360] *** UUID 4B2AC217-7071-EC47-8945-EB5E2188BE49 ***
    [13:48:10.0360] Restore options:
    [13:48:10.0360]  UUID                           => <CFString 0x19315c0 [0x2f3ad0]>{contents = "4B2AC217-7071-EC47-8945-EB5E2188BE49"}
    [13:48:10.0360]  MinimumSystemPartition         => <CFNumber 0x1931510 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
    [13:48:10.0360]  SystemPartitionSize            => <CFNumber 0x1930f50 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
    [13:48:10.0360]  SystemPartitionPadding         => <CFBasicHash 0x192f3c0 [0x2f3ad0]>{type = mutable dict, count = 5,
    [13:48:10.0360] entries =>
    [13:48:10.0360]  2 : <CFString 0x1931540 [0x2f3ad0]>{contents = "128"} = <CFNumber 0x1931570 [0x2f3ad0]>{value = +1280, type = kCFNumberSInt64Type}
    [13:48:10.0360]  3 : <CFString 0x1930f20 [0x2f3ad0]>{contents = "16"} = <CFNumber 0x192f3f0 [0x2f3ad0]>{value = +160, type = kCFNumberSInt64Type}
    [13:48:10.0360]  4 : <CFString 0x192ede0 [0x2f3ad0]>{contents = "32"} = <CFNumber 0x1931250 [0x2f3ad0]>{value = +320, type = kCFNumberSInt64Type}
    [13:48:10.0360]  5 : <CFString 0x1931960 [0x2f3ad0]>{contents = "8"} = <CFNumber 0x192ed50 [0x2f3ad0]>{value = +80, type = kCFNumberSInt64Type}
    [13:48:10.0360]  8 : <CFString 0x1931180 [0x2f3ad0]>{contents = "64"} = <CFNumber 0x1931950 [0x2f3ad0]>{value = +640, type = kCFNumberSInt64Type}
    [13:48:10.0360] }
    [13:48:10.0360]
    [13:48:10.0360] entering load_sep_os
    [13:48:10.0360] device has no sep
    [13:48:10.0360] entering partition_nand_device
    [13:48:10.0360] device supports boot-from-NAND
    [13:48:10.0360] nand device is already partitioned
    [13:48:10.0360] entering wait_for_storage_device
    [13:48:10.0360] Searching for NAND service
    [13:48:10.0360] Found NAND service: IOFlashStoragePartition
    [13:48:10.0360] NAND initialized. Waiting for devnode.
    [13:48:10.0360] entering clear_remap_variable
    [13:48:10.0360] executing /usr/sbin/nvram
    [13:48:10.0360] entering format_effaceable_storage
    [13:48:10.0360] effaceable storage is formatted, clearing it
    [13:48:10.0360] effaceable storaged cleared
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] AppleD1972PMUPowerSource: limiting USB input current to 390 mA (measured 462 mA)
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is Sochi11D257.N42OS
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume Sochi11D257.N42OS appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] entering check_for_restore_log
    [13:48:10.0360] found restore log (size = 28347)
    [13:48:10.0360] entering unmount_filesystems
    [13:48:10.0360] error unmounting '/mnt2': Invalid argument
    [13:48:10.0360] entering clean_NAND
    [13:48:10.0360] NAND format complete
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0 system= data=
    [13:48:10.0360] entering format_storage_for_LwVM
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] unexpected partition 'LwVM' - skipping
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system= data=
    [13:48:10.0360] entering create_filesystem_partitions
    [13:48:10.0360] User specified system partition size, skipping firmware extras size.
    [13:48:10.0360] system partition padding size is: 167772160 bytes
    [13:48:10.0360] unable to open : No such file or directory
    [13:48:10.0360] creating 2 partitions
    [13:48:10.0360] creating encrypted data partition
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] wipe entire partition: 1 (old = 0 new = 1820)
    [13:48:10.0360] block size for /dev/disk0s1s1: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] block size for /dev/disk0s1s2: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
    [13:48:10.0360] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] entering mount_filesystems
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is System
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume System appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s2
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is Data
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume Data appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s2 mounted on /mnt2
    [13:48:10.0360] entering resize_system_partition_to_options
    [13:48:10.0360] User specified system partition size, skipping firmware extras size.
    [13:48:10.0360] Found SystemPartitionPadding value of 167772160 bytes
    [13:48:10.0360] Erasing system partition prior to resize operation.
    [13:48:10.0360] block size for /dev/disk0s1s1: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is System
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume System appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] Trying to resize system partition to 1908408320 bytes aka 1820 MB
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:0 requiredSize=465920
    [13:48:10.0360] no change in size
    [13:48:10.0360] Successfully resized the system partition
    [13:48:10.0360] entering maximize_data_partition
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:1 requiredSize=<<<<<IMEI>>>>>>6
    [13:48:10.0360] maximizing data partition to 13946060799 bytes
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:1 requiredSize=3404800
    [13:48:10.0360] no change in size
    [13:48:10.0360] Successfully resized data partition to consume free blocks
    [13:48:10.0360] The system partition now has a total HFS+ capacity of 1820 MB
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] entering unmount_filesystems
    [13:48:10.0360] entering ramrod_ticket_update
    [13:48:10.0360] looking up root ticket hash
    [13:48:10.0360] device tree ticket-hash: <CFData 0x1930040 [0x2f3ad0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:48:10.0360] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
    [13:48:10.0360] received valid ticket (2741 bytes)
    [13:48:10.0360] entering restore_images
    [13:48:10.0360] Successfully marked device node /dev/rdisk0s1s1 as static data
    [13:48:10.0360] executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
    [13:48:10.0360] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
    [13:48:10.0360] void AppleUSBDeviceM

    Hello gamavranje,
    Thanks for using Apple Support Communities.
    The icons you're seeing on your iPhone indicate it is in recovery mode.  Please plug your iPhone into your computer, and restore it with iTunes.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Take care,
    Alex H.

  • The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns but I can cut and paste them so I know they are still there. Has this happened to others

    The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet.  I have charts and other stuff related the the original table so I need to figure out why I can only see from column C  forward.  I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?

    I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).

  • When I use FF 4 I have problem with my Intranet user interface, I lost the ability to acces my intranet database? So for now I go back to previous version. I hope that kind of problem can be fix soon.

    I usually use FF 3.6 version to download data from my company intranet. With old FF version I can access the intranet easily. But when I upgrade to the FF 4, I lost the ability to customize the variable data I want to collect. It kind of stuck. Usually when I right click I have option what to do. with the new version my option is none. nothing change. It's frustrating. So now, I go back to previous version. You said previous version is vulnerable to phishing or virus or something but still it user friendly for me to access my company data. Please fix that bug and I'll upgrade to the newest version.

    I want to add my progress about this problem. I find this problem in IE 9, but it has compatibility view, though not too perfect but quite helpful. Whereas FF 4, from article in support, said it doesn't have one. So, I beg you FF team to accommodate us who still deal with old web design so we still can use this FF 4. Please..please..please. I still believe Firefox is the best browser and I hope FF team also responsive about current problem. I think I don't have any option, but to downgrade FF to 3.6 until someone tell me how to deal with this kind of problem. Thanks.

  • I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought.

    I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought. I connected my iPhone to my computer and sync'd it hoping that it could download my purchases from the itunes store and then put them back on to my phone but no such luck. When i look at my iphone on my computer and look at tones, they do not show up at all. However, if i click on the "On This iPhone" tab and click on "Tones" the deleted ringtones and altert tones show up...they are just grey'd out and have a dotted circle to the left of them. I also tried to go to the iTunes store on my phone and redownload them and it tells me that i have already purchased this ringtone and asks me if i want to buy it again. I press Cancel. I know when i do that with music it would usually let me redownload the song without buying it again but it wont let me with the ringtones...so how do i get them back? any help would be greatly appreicated

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • I have purchased many movies on iTunes, now they are adding closed captioning or subtitles to those movies, BUT can not reload them so I can view those subtitles.  I am mentally disabled and need the subtitles.

      Hello,  To start off, I have been a member of iTunes for awhile and have been content with them, until now.  I am legally disabled due to a head injury that happened when I was a teenager.  I am everyday functional, but I do need closed captioning(cc) or subtitles to understand the movie or TV show.  I have purchased lots of movies and TV shows from iTunes.  As any new business does, iTunes has updated itself and added features for their customers. They figure out what the consumers want and like.  I started to realize that iTunes added subtitles for the deaf and disabled, but as I was told by Apple there was nothing I could do about reloading those already purchased movies, to include the cc or subtitles.  Since then, I don't use iTunes and it's a real shame because I love electronics and it's technology.  I wish Apple would work with the consumer.  Why can't I reload the iTunes movies on my PC (Win7) with the subtitles, which they now offer, but didn't when I purchased them?  To me, that is wrong to do that to a customer.  Now that they are including cc/subtitles , everyone is able to enjoy iTunes and not be excluded.   Someone__please explain this to me.  Thank you for reading this.
    Carrie-

    Untill the movie studios agree to allow past downloads of movies outside of the US, you aill always have to have a copy of purchased movies on your computer. If not, you will have to buy them again if you delete them.

  • After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version.  Can I retrieve that icon and thus that facility?

    After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version.  Can I retrieve that icon and thus that facility?

    Unfortunately not. Lion has made many adjustments to the previous system. Try opening your pdfs in keynote.

  • How can I do to transfer all iTunes library from my Mac book Pro to Time capsule without to lost the alphabetic sequence of songs

    How can I do to transfer all iTunes library from my Mac book Pro to Time capsule without to lost the alphabetic sequence of songs & artists? What is the correct way to transfer my 3000 songs to Time capsule, to free the memory of my Mac? Thanks a lot. Carlo Molinari (Rome - Italy)

    How can I do to transfer all iTunes library from my Mac book Pro to Time capsule without to lost the alphabetic sequence of songs & artists? What is the correct way to transfer my 3000 songs to Time capsule, to free the memory of my Mac?
    The following are the basic steps to transfer your iTunes Media folder from your MacBook Pro to the Time Capsule (TC). Note: You will leave the iTunes Library, and its associated files, on the MacBook Pro as you will only be moving the media files.
    Be sure to shutdown iTunes before starting.
    Next, move the "iTunes Music" folder, located in ~/Music/iTunes/, to wherever you want on your TC's internal hard drive. Remember to leave the Album Artwork folder, as well as the three individual library files where they are on the MacBook Pro.
    Wait a while. If you have a large library, this will take a bit of time.
    Once the iTunes Media folder has been transferred, open iTunes. Note: It will still be looking at your local iTunes Library on the MBP. As such it will think that the iTunes Media folder is still on the MBP as well. However, we just relocated it to the TC. If you attempt to select any song, you will get an error that the song is "missing." Not to worry, we will correct this in the next step.
    We need to tell iTunes the media has moved to the TC's internal HDD. To change where iTunes "looks" for the media, open iTunes and go to the Advanced > General tab and use the "Change..." button to tell it where your new "iTunes Music" library is located.
    Once this is done iTunes will likely pop up a progress window telling you that it's re-analyzing your library. Let it complete this step.
    As a final check to make sure everything when as planned, click on any library file from within iTunes and press cmd + i (or View > Get Info). At the bottom of the Summary tab in that window is a "Where:" section that tells you the actual file path to that piece of media; be sure that path begins with the name of your TC's drive, and not "Macintosh HD."

  • I've lost the use of Appleworks in 10.9.2. Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other?

    I've lost the use of Appleworks by upgrading to 10.9.2.
    Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and  few other applications that aren't available on OS 10.9.2.
    Any suggestions?
    Thank you for your help.

    Hello again, WZZZ,
    Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
    Some thoughts:
    • The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
    • The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
    • If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
    So, all in all a good project that got me where I wanted to go. Thank you for your help.
    Appreciatively,
    wallah

Maybe you are looking for

  • DML ERROR LOGGING - how to log 1 constraint violation on record

    Hi there We are using DML error logging to log records which violate constraints into an error table. The problem is when a record violates > 1 constraint it logs the record but details only 1 constraint violation - is there a way to get it to record

  • IOS 5 bug - album artwork takes huge amounts of space

    I've upgraded both my iPhone 4 and my iPad 1 to iOS 5. Under iOS 4, the "Other" data reported by iTunes on these devices wasn't significant. Under iOS 5, both report over 1.5GB for "Other". By browsing around the phone with iExplorer, it seems that m

  • Convert data is not writng anythng in LSMW?

    Hi Friends, After uplaoding the data, when I goto convert data step and execute. It reads 2 records but it doesn't write anything. So I am not able to execute the batch input method? I am doing that for Material master? Can any one help me regarding

  • Problems installing java edition

    Hi, I've encountered several problems during the NW04 java edition installation. After several locks, I finally discovered that the 1500 MB database log area was full. I then allocated 3000 MB and got the following error during the 'java database loa

  • Cannot find info on using random play and regular play symbols

    cannot find info on using random play and regular play symbols