I lost wifi connection during an ois update for my iphone phone i lost wifi connection during an ois update for my iphone 4, now my 4, now my phone is i restartlocked. how do
I left a wifi zone during an ios update for my iphone 4, now my phone is frozen in that state. how do i restart my phone to continue using it untill i get back to awifi zone?
You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.
Similar Messages
-
During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect. How do i connect to iTunes to activate iPhone as iPhone cannot connect to WiFi or any other network
Please how do i reactivate iPhone?Hello DadiPrince,
The following article contains information beneficial to getting your iPhone back into normal working order.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
All the best,
Allen -
I downloaded itunes onto my new computer, i connected my iphone during the updating process itunes failed and i lost all my purchased music from my iphone and can no longer retrieve them. I would like to know how i can reinstate the lost music please.
When you are done with this issue, consider the computer back at the office may still
have access to your iTunes account, and it should be de-auhorized. You can do that
remotely, but be sure you carefully do not mess up your other computer iTunes libraries.
Good luck & happy computing! -
WiFi cut out during update and iPod 4th gen is stuck on connect to iTunes screen
I was updating the iOS and I think the WiFi cut out and messed it up. This has happened before and supoort helped me fix it, but im not paying 20 dollars for them to help again...
Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software
Then restore from backup
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
TS3694 iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)
this issue , happen to my iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)
Sudden screen : USB pointing to iTunes . it shows that it need a restore and update .. after downloading the software
and extracting .. found Error1 at the point Verify firmware . AGAIN AND
and this is the log ..
2014-08-11 15:46:30.611 [4472:1648]: restore library built Feb 12 2014 at 16:27:17
2014-08-11 15:46:30.611 [4472:1648]: iTunes: iTunes 11.3.1.2
2014-08-11 15:46:30.611 [4472:1648]: iTunes: Software payload version: 11D257 (option key)
2014-08-11 15:46:30.611 [4472:1648]: iTunes: Using MobileRestore state machine
[13:47:25.0555] Changing state from 'Idle' to 'Restoring'
[13:47:25.0555] device software does not support nonce generation
[13:47:25.0555] requested restore behavior: Erase
[13:47:25.0570] requested variant: Erase
[13:47:25.0570] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 061FEA80 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 061FD2E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0BA32F38 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[13:47:26.0569] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[13:47:26.0569] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
[13:47:27.0068] amai: tss_submit_job: HttpQueryInfo returned 200
[13:47:27.0286] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[13:47:27.0286] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
[13:47:27.0318] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[13:47:27.0333] <DFU Device 0562C260>: production fused device
[13:47:27.0333] requested restore behavior: Erase
[13:47:27.0333] device software does not support nonce generation
[13:47:27.0349] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
[13:47:27.0349] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
[13:47:27.0364] <DFU Device 0562C260>: operation 0 progress 2
[13:47:27.0380] <DFU Device 0562C260>: operation 0 progress 5
[13:47:27.0396] <DFU Device 0562C260>: operation 0 progress 8
[13:47:27.0411] <DFU Device 0562C260>: operation 0 progress 10
[13:47:27.0427] <DFU Device 0562C260>: operation 0 progress 13
[13:47:27.0442] <DFU Device 0562C260>: operation 0 progress 16
[13:47:27.0458] <DFU Device 0562C260>: operation 0 progress 18
[13:47:27.0474] <DFU Device 0562C260>: operation 0 progress 21
[13:47:27.0489] <DFU Device 0562C260>: operation 0 progress 24
[13:47:27.0505] <DFU Device 0562C260>: operation 0 progress 26
[13:47:27.0520] <DFU Device 0562C260>: operation 0 progress 29
[13:47:27.0536] <DFU Device 0562C260>: operation 0 progress 32
[13:47:27.0552] <DFU Device 0562C260>: operation 0 progress 34
[13:47:27.0567] <DFU Device 0562C260>: operation 0 progress 37
[13:47:27.0583] <DFU Device 0562C260>: operation 0 progress 40
[13:47:27.0598] <DFU Device 0562C260>: operation 0 progress 42
[13:47:27.0614] <DFU Device 0562C260>: operation 0 progress 45
[13:47:27.0630] <DFU Device 0562C260>: operation 0 progress 48
[13:47:27.0645] <DFU Device 0562C260>: operation 0 progress 50
[13:47:27.0661] <DFU Device 0562C260>: operation 0 progress 53
[13:47:27.0676] <DFU Device 0562C260>: operation 0 progress 56
[13:47:27.0692] <DFU Device 0562C260>: operation 0 progress 59
[13:47:27.0708] <DFU Device 0562C260>: operation 0 progress 61
[13:47:27.0723] <DFU Device 0562C260>: operation 0 progress 64
[13:47:27.0739] <DFU Device 0562C260>: operation 0 progress 67
[13:47:27.0754] <DFU Device 0562C260>: operation 0 progress 69
[13:47:27.0770] <DFU Device 0562C260>: operation 0 progress 72
[13:47:27.0786] <DFU Device 0562C260>: operation 0 progress 75
[13:47:27.0801] <DFU Device 0562C260>: operation 0 progress 77
[13:47:27.0817] <DFU Device 0562C260>: operation 0 progress 80
[13:47:27.0832] <DFU Device 0562C260>: operation 0 progress 83
[13:47:27.0848] <DFU Device 0562C260>: operation 0 progress 85
[13:47:27.0864] <DFU Device 0562C260>: operation 0 progress 88
[13:47:27.0879] <DFU Device 0562C260>: operation 0 progress 91
[13:47:27.0895] <DFU Device 0562C260>: operation 0 progress 93
[13:47:27.0910] <DFU Device 0562C260>: operation 0 progress 96
[13:47:27.0926] <DFU Device 0562C260>: operation 0 progress 99
[13:47:27.0926] WinDFU::UploadData: EOF, cbRead: 554
[13:47:27.0942] <DFU Device 0562C260>: operation 0 progress 100
[13:47:27.0942] WinDFU::UploadData: ZLP
[13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
[13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
[13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
[13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
[13:47:30.0968] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
[13:47:30.0968] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
[13:47:30.0968] WinDFU::ResetDevice: resetting...
[13:47:31.0046] WinDFU::FinalizeDfuUpdate: success
[13:47:31.0046] <DFU Device 0562C260>: DFU succeeded
[13:47:31.0046] Finished DFU Restore Phase: Successful
[13:47:31.0218] DFU mode device disconnected
[13:47:31.0218] Device removed when in state Restoring, moving device to transition state
[13:47:31.0218] Changing state from 'Restoring' to 'Transitioning'
[13:47:31.0218] Creating timer to monitor transition
[13:47:32.0175] DFU mode device connected
[13:47:32.0175] Transitioning device returned, continuing restore.
[13:47:32.0175] Canceling timer
[13:47:32.0175] Changing state from 'Transitioning' to 'Restoring'
[13:47:32.0175] AppleDevice::GetDeviceID: failed for iBoot
[13:47:32.0175] requested restore behavior: Erase
[13:47:32.0175] requested variant: Erase
[13:47:32.0175] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 061FDC70 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 061FE378 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0B9D5148 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0B9D5190 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0B9D51D8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0B9D5220 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0B9D5268 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0B9D52B0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0B9D52F8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0B9D5340 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0B9D5388 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0B9D53D0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0B9D5418 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0B9D5460 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0B9D54A8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 06266350 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 06266398 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 062663E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 064698C8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[13:47:33.0064] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[13:47:33.0064] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
[13:47:33.0298] amai: tss_submit_job: HttpQueryInfo returned 200
[13:47:33.0501] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[13:47:33.0501] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
[13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "iBSS" has been previously personalized; skipping it
[13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "LLB" has been previously personalized; skipping it
[13:47:33.0517] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[13:47:33.0532] <DFU Device 0BA2A9D8>: production fused device
[13:47:33.0532] requested restore behavior: Erase
[13:47:33.0532] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:33.0532] AppleDevice::GetDeviceID: failed for iBoot
[13:47:33.0532] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
[13:47:33.0532] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
[13:47:33.0564] <DFU Device 0BA2A9D8>: operation 0 progress 0
[13:47:33.0579] <DFU Device 0BA2A9D8>: operation 0 progress 1
[13:47:33.0595] <DFU Device 0BA2A9D8>: operation 0 progress 2
[13:47:33.0626] <DFU Device 0BA2A9D8>: operation 0 progress 3
[13:47:33.0642] <DFU Device 0BA2A9D8>: operation 0 progress 4
[13:47:33.0657] <DFU Device 0BA2A9D8>: operation 0 progress 5
[13:47:33.0688] <DFU Device 0BA2A9D8>: operation 0 progress 6
[13:47:33.0704] <DFU Device 0BA2A9D8>: operation 0 progress 7
[13:47:33.0735] <DFU Device 0BA2A9D8>: operation 0 progress 8
[13:47:33.0751] <DFU Device 0BA2A9D8>: operation 0 progress 9
[13:47:33.0766] <DFU Device 0BA2A9D8>: operation 0 progress 10
[13:47:33.0798] <DFU Device 0BA2A9D8>: operation 0 progress 11
[13:47:33.0813] <DFU Device 0BA2A9D8>: operation 0 progress 12
[13:47:33.0844] <DFU Device 0BA2A9D8>: operation 0 progress 13
[13:47:33.0860] <DFU Device 0BA2A9D8>: operation 0 progress 14
[13:47:33.0876] <DFU Device 0BA2A9D8>: operation 0 progress 15
[13:47:33.0907] <DFU Device 0BA2A9D8>: operation 0 progress 16
[13:47:33.0922] <DFU Device 0BA2A9D8>: operation 0 progress 17
[13:47:33.0954] <DFU Device 0BA2A9D8>: operation 0 progress 18
[13:47:33.0969] <DFU Device 0BA2A9D8>: operation 0 progress 19
[13:47:33.0985] <DFU Device 0BA2A9D8>: operation 0 progress 20
[13:47:34.0016] <DFU Device 0BA2A9D8>: operation 0 progress 21
[13:47:34.0032] <DFU Device 0BA2A9D8>: operation 0 progress 22
[13:47:34.0063] <DFU Device 0BA2A9D8>: operation 0 progress 23
[13:47:34.0078] <DFU Device 0BA2A9D8>: operation 0 progress 24
[13:47:34.0094] <DFU Device 0BA2A9D8>: operation 0 progress 25
[13:47:34.0125] <DFU Device 0BA2A9D8>: operation 0 progress 26
[13:47:34.0141] <DFU Device 0BA2A9D8>: operation 0 progress 27
[13:47:34.0172] <DFU Device 0BA2A9D8>: operation 0 progress 28
[13:47:34.0188] <DFU Device 0BA2A9D8>: operation 0 progress 29
[13:47:34.0203] <DFU Device 0BA2A9D8>: operation 0 progress 30
[13:47:34.0234] <DFU Device 0BA2A9D8>: operation 0 progress 31
[13:47:34.0250] <DFU Device 0BA2A9D8>: operation 0 progress 32
[13:47:34.0281] <DFU Device 0BA2A9D8>: operation 0 progress 33
[13:47:34.0297] <DFU Device 0BA2A9D8>: operation 0 progress 34
[13:47:34.0312] <DFU Device 0BA2A9D8>: operation 0 progress 35
[13:47:34.0344] <DFU Device 0BA2A9D8>: operation 0 progress 36
[13:47:34.0359] <DFU Device 0BA2A9D8>: operation 0 progress 37
[13:47:34.0390] <DFU Device 0BA2A9D8>: operation 0 progress 38
[13:47:34.0406] <DFU Device 0BA2A9D8>: operation 0 progress 39
[13:47:34.0422] <DFU Device 0BA2A9D8>: operation 0 progress 40
[13:47:34.0453] <DFU Device 0BA2A9D8>: operation 0 progress 41
[13:47:34.0468] <DFU Device 0BA2A9D8>: operation 0 progress 42
[13:47:34.0500] <DFU Device 0BA2A9D8>: operation 0 progress 43
[13:47:34.0515] <DFU Device 0BA2A9D8>: operation 0 progress 44
[13:47:34.0531] <DFU Device 0BA2A9D8>: operation 0 progress 45
[13:47:34.0562] <DFU Device 0BA2A9D8>: operation 0 progress 46
[13:47:34.0578] <DFU Device 0BA2A9D8>: operation 0 progress 47
[13:47:34.0593] <DFU Device 0BA2A9D8>: operation 0 progress 48
[13:47:34.0624] <DFU Device 0BA2A9D8>: operation 0 progress 49
[13:47:34.0640] <DFU Device 0BA2A9D8>: operation 0 progress 50
[13:47:34.0671] <DFU Device 0BA2A9D8>: operation 0 progress 51
[13:47:34.0687] <DFU Device 0BA2A9D8>: operation 0 progress 52
[13:47:34.0702] <DFU Device 0BA2A9D8>: operation 0 progress 53
[13:47:34.0734] <DFU Device 0BA2A9D8>: operation 0 progress 54
[13:47:34.0749] <DFU Device 0BA2A9D8>: operation 0 progress 55
[13:47:34.0780] <DFU Device 0BA2A9D8>: operation 0 progress 56
[13:47:34.0796] <DFU Device 0BA2A9D8>: operation 0 progress 57
[13:47:34.0812] <DFU Device 0BA2A9D8>: operation 0 progress 58
[13:47:34.0843] <DFU Device 0BA2A9D8>: operation 0 progress 59
[13:47:34.0858] <DFU Device 0BA2A9D8>: operation 0 progress 60
[13:47:34.0890] <DFU Device 0BA2A9D8>: operation 0 progress 61
[13:47:34.0905] <DFU Device 0BA2A9D8>: operation 0 progress 62
[13:47:34.0921] <DFU Device 0BA2A9D8>: operation 0 progress 63
[13:47:34.0952] <DFU Device 0BA2A9D8>: operation 0 progress 64
[13:47:34.0968] <DFU Device 0BA2A9D8>: operation 0 progress 65
[13:47:34.0999] <DFU Device 0BA2A9D8>: operation 0 progress 66
[13:47:35.0014] <DFU Device 0BA2A9D8>: operation 0 progress 67
[13:47:35.0030] <DFU Device 0BA2A9D8>: operation 0 progress 68
[13:47:35.0061] <DFU Device 0BA2A9D8>: operation 0 progress 69
[13:47:35.0077] <DFU Device 0BA2A9D8>: operation 0 progress 70
[13:47:35.0108] <DFU Device 0BA2A9D8>: operation 0 progress 71
[13:47:35.0124] <DFU Device 0BA2A9D8>: operation 0 progress 72
[13:47:35.0139] <DFU Device 0BA2A9D8>: operation 0 progress 73
[13:47:35.0170] <DFU Device 0BA2A9D8>: operation 0 progress 74
[13:47:35.0186] <DFU Device 0BA2A9D8>: operation 0 progress 75
[13:47:35.0217] <DFU Device 0BA2A9D8>: operation 0 progress 76
[13:47:35.0233] <DFU Device 0BA2A9D8>: operation 0 progress 77
[13:47:35.0248] <DFU Device 0BA2A9D8>: operation 0 progress 78
[13:47:35.0280] <DFU Device 0BA2A9D8>: operation 0 progress 79
[13:47:35.0295] <DFU Device 0BA2A9D8>: operation 0 progress 80
[13:47:35.0326] <DFU Device 0BA2A9D8>: operation 0 progress 81
[13:47:35.0342] <DFU Device 0BA2A9D8>: operation 0 progress 82
[13:47:35.0358] <DFU Device 0BA2A9D8>: operation 0 progress 83
[13:47:35.0389] <DFU Device 0BA2A9D8>: operation 0 progress 84
[13:47:35.0404] <DFU Device 0BA2A9D8>: operation 0 progress 85
[13:47:35.0436] <DFU Device 0BA2A9D8>: operation 0 progress 86
[13:47:35.0451] <DFU Device 0BA2A9D8>: operation 0 progress 87
[13:47:35.0467] <DFU Device 0BA2A9D8>: operation 0 progress 88
[13:47:35.0498] <DFU Device 0BA2A9D8>: operation 0 progress 89
[13:47:35.0514] <DFU Device 0BA2A9D8>: operation 0 progress 90
[13:47:35.0529] <DFU Device 0BA2A9D8>: operation 0 progress 91
[13:47:35.0560] <DFU Device 0BA2A9D8>: operation 0 progress 92
[13:47:35.0576] <DFU Device 0BA2A9D8>: operation 0 progress 93
[13:47:35.0607] <DFU Device 0BA2A9D8>: operation 0 progress 94
[13:47:35.0623] <DFU Device 0BA2A9D8>: operation 0 progress 95
[13:47:35.0638] <DFU Device 0BA2A9D8>: operation 0 progress 96
[13:47:35.0670] <DFU Device 0BA2A9D8>: operation 0 progress 97
[13:47:35.0685] <DFU Device 0BA2A9D8>: operation 0 progress 98
[13:47:35.0716] <DFU Device 0BA2A9D8>: operation 0 progress 99
[13:47:35.0716] WinDFU::UploadData: EOF, cbRead: 1116
[13:47:35.0732] <DFU Device 0BA2A9D8>: operation 0 progress 100
[13:47:35.0732] WinDFU::UploadData: ZLP
[13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
[13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
[13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
[13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
[13:47:38.0758] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
[13:47:38.0758] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
[13:47:38.0758] WinDFU::ResetDevice: resetting...
[13:47:38.0836] WinDFU::FinalizeDfuUpdate: success
[13:47:38.0836] <DFU Device 0BA2A9D8>: DFU succeeded
[13:47:38.0836] Finished DFU Restore Phase: Successful
[13:47:39.0039] DFU mode device disconnected
[13:47:39.0039] Device removed when in state Restoring, moving device to transition state
[13:47:39.0039] Changing state from 'Restoring' to 'Transitioning'
[13:47:39.0039] Creating timer to monitor transition
[13:47:41.0674] Recovery mode device connected
[13:47:41.0674] Transitioning device returned, continuing restore.
[13:47:41.0674] Canceling timer
[13:47:41.0674] Changing state from 'Transitioning' to 'Restoring'
[13:47:41.0684] requested restore behavior: Erase
[13:47:41.0684] requested variant: Erase
[13:47:41.0684] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[13:47:42.0528] iBoot build-version = iBoot-1940.10.58
[13:47:42.0528] iBoot build-style = RELEASE
[13:47:42.0528] requested restore behavior: Erase
[13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0528] requested restore behavior: Erase
[13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0543] unable to open device_map.txt: No such file or directory
[13:47:42.0543] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:42.0543] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:42.0543] AMDeviceIoControl: GetOverlappedResult failed
[13:47:42.0543] AMDeviceIoControl: pipe stall
[13:47:42.0543] USBControlTransfer: error 31, usbd status c0000004
[13:47:42.0543] command device request for 'getenv radio-error' failed: 2008
[13:47:42.0543] radio-error not set
[13:47:42.0543] unable to open device_map.txt: No such file or directory
[13:47:42.0543] <Recovery Mode Device 0555AEB8>: production fused device
[13:47:42.0543] requested restore behavior: Erase
[13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0543] requested restore behavior: Erase
[13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0543] interface has 1 endpoints, file pipe = 1
[13:47:42.0543]
[13:47:42.0543] <Recovery Mode Device 0555AEB8>: operation 4 progress -1
[13:47:42.0606] unable to open device_map.txt: No such file or directory
[13:47:42.0606] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:42.0606] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:42.0606] requested restore behavior: Erase
[13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0606] requested restore behavior: Erase
[13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:42.0606] <Recovery Mode Device 0555AEB8>: operation 42 progress -1
[13:47:42.0606] requested restore behavior: Erase
[13:47:42.0621] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:43.0651] <Recovery Mode Device 0555AEB8>: operation 5 progress -1
[13:47:43.0994] unable to open device_map.txt: No such file or directory
[13:47:43.0994] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:43.0994] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:43.0994] AMDeviceIoControl: GetOverlappedResult failed
[13:47:43.0994] AMDeviceIoControl: pipe stall
[13:47:43.0994] USBControlTransfer: error 31, usbd status c0000004
[13:47:43.0994] command device request for 'getenv ramdisk-delay' failed: 2008
[13:47:45.0616] <Recovery Mode Device 0555AEB8>: operation 6 progress -1
[13:47:46.0630] <Recovery Mode Device 0555AEB8>: operation 7 progress -1
[13:47:46.0942] <Recovery Mode Device 0555AEB8>: operation 8 progress -1
[13:47:46.0958] unable to open device_map.txt: No such file or directory
[13:47:46.0958] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
[13:47:46.0958] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[13:47:46.0958] <Recovery Mode Device 0555AEB8>: operation 9 progress -1
[13:47:46.0958] <Recovery Mode Device 0555AEB8>: Recovery mode succeeded
[13:47:46.0958] Finished Recovery Restore Phase: Successful
[13:47:48.0409] Recovery mode device disconnected
[13:47:48.0409] Device removed when in state Restoring, moving device to transition state
[13:47:48.0409] Changing state from 'Restoring' to 'Transitioning'
[13:47:48.0409] Creating timer to monitor transition
[13:47:52.0895] RestoreOS mode device connected
[13:47:52.0895] Transitioning device returned, continuing restore.
[13:47:52.0905] Canceling timer
[13:47:52.0905] Changing state from 'Transitioning' to 'Restoring'
[13:47:52.0905] <Restore Device 05577800>: operation 44 progress -1
[13:47:52.0905] requested restore behavior: Erase
[13:47:52.0905] requested variant: Erase
[13:47:52.0905] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[13:47:53.0792] requested restore behavior: Erase
[13:47:53.0792] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:53.0792] device did not return saved USB log
[13:47:53.0792] device did not return saved panic log
[13:47:53.0792] previous restore failed with exit status 0x100
[13:47:53.0792] connected to service com.apple.mobile.restored
[13:47:53.0808] using protocol version 13
[13:47:53.0808] unable to open device_map.txt: No such file or directory
[13:47:53.0808] board config = n42ap
[13:47:53.0808] no value returned for BootArgs
[13:47:53.0824] _copyDeviceProperty() failed for restore bootargs
[13:47:53.0824] no value returned for MarketingPartNumber
[13:47:53.0824] _copyDeviceProperty() failed for mpn
[13:47:53.0824] requested restore behavior: Erase
[13:47:53.0824] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[13:47:53.0839] value query for 'HardwareModel' returned 'N42AP'
[13:47:53.0839] <Restore Device 05577800>: operation 28 progress -1
[13:48:10.0360] previous restore failed: re:INF@ 145] created partition 1 as 'Effaceable'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 2 as 'NVRAM'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 3 as 'Firmware'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 4 as 'Filesystem'
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 4
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 5 as 'System Config'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 6 as 'Diagnostic Data'
[13:48:10.0360] [nand_part_core:INF@ 145] created partition 7 as 'Bad Block Table'
[13:48:10.0360] com.apple.AppleFSCompressionTypeZlib load succeeded
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 7
[13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x32600000(0x82cc6000)
[13:48:10.0360] L2TP domain init
[13:48:10.0360] L2TP domain init complete
[13:48:10.0360] PPTP domain init
[13:48:10.0360] AppleSwissPPNFTL started with IOFlashStoragePartition provider
[13:48:10.0360] [NAND] _FindFlashMediaAndKeepout:601 physical nand block offset 1
[13:48:10.0360] AppleNANDFTL registered[NAND] start:356 this 0x85e41800 PROVIDER=0x85f2a400 flashMedia=0x85f2a400
[13:48:10.0360] [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
[13:48:10.0360] [NAND] WMR_Start:174 FIL_Init [OK]
[13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x32800000(0xde3b4000)
[13:48:10.0360] virtual bool AppleDisplayPipe::start_hardware(IOService *), auto-detect chip
[13:48:10.0360] [NAND] WMR_Open:371 VFL_Open [OK]
[13:48:10.0360] Scaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] void AppleDisplayPipe::setupVideoDownscalingLimits(): minimum-frequency property not found, using getClockFrequency(0) instead.
[13:48:10.0360] Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
[13:48:10.0360] Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
[13:48:10.0360] AppleMultitouchN1SPI: successfully started
[13:48:10.0360] AppleH4CamIn::start - back camera expected
[13:48:10.0360] AppleH4CamIn::start - front camera expected
[13:48:10.0360] AppleH4CamIn::power_off_hardware
[13:48:10.0360] AppleAP3DSH::probe found device with ID: 0x3f
[13:48:10.0360] AppleAP3DSH::handleStart _calibrationMatrix [64699 -1892 -370] [-1570 65035 -244] [849 465 63854]
[13:48:10.0360] AppleAP3DSH::handleStart _calibrationOffsets [518853 -714699 -1661621]
[13:48:10.0360] AppleAP3DSH::handleStart - No calibration inverse matrix or the data is invalid, Compute locally
[13:48:10.0360] AppleAP3DSH::handleStart _calibrationInverseMatrix [66427 1929 393] [1599 66087 261] [-895 -507 67257]
[13:48:10.0360] AppleAP3DSH::handleStart _odr400HzSampleInterval = 2440
[13:48:10.0360] AppleH4CamIn::setPowerStateGated: 0
[13:48:10.0360] AppleCS35L19Amp: could not allocate control 395
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
[13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 0
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType Detached
[13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[13:48:10.0360] AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
[13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
[13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[13:48:10.0360] display-scale = 2
[13:48:10.0360] display-rotation = 0
[13:48:10.0360] found applelogo at /usr/share/progressui/[email protected]
[13:48:10.0360] found display: primary
[13:48:10.0360] display: 640 x 1136
[13:48:10.0360] found PTP interface
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP
[13:48:10.0360] AppleSynopsysOTGDevice Interface: PTP
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: iPod USB Interface
[13:48:10.0360] AppleSynopsysOTGDevice Interface: USBAudioControl
[13:48:10.0360] AppleSynopsysOTGDevice Interface: USBAudioStreaming
[13:48:10.0360] AppleSynopsysOTGDevice Interface: IapOverUsbHid
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
[13:48:10.0360] AppleSynopsysOTGDevice Interface: PTP
[13:48:10.0360] AppleSynopsysOTGDevice Interface: AppleUSBMux
[13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
[13:48:10.0360] AppleSynopsysOTGDevice Interface: PTP
[13:48:10.0360] AppleSynopsysOTGDevice Interface: AppleUSBMux
[13:48:10.0360] AppleSynopsysOTGDevice Interface: AppleUSBEthernet
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
[13:48:10.0360] IOAccessoryPortUSB::start
[13:48:10.0360] virtual bool AppleUSBDeviceMux::start(IOService *) build: Jun 11 2014 20:11:28
[13:48:10.0360] init_waste
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
[13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
[13:48:10.0360] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
[13:48:10.0360] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
[13:48:10.0360] AppleBCMWLANCore::init(): IO80211-46 Jun 11 2014 20:10:03
[13:48:10.0360] [NAND] WMR_Open:420 FTL_Open [OK]
[13:48:10.0360] [NAND] _publishServices:642 FTL capabilities: 0x00000001
[13:48:10.0360] [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks - count: 23 max_count: 23
[13:48:10.0360] [NAND] _fetchBorrowedList:881 number of borrowed blocks 16
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 0
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 1
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 2
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 3
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 5
[13:48:10.0360] [nand_part_core:INF@ 157] published partition 6
[13:48:10.0360] 000828.945879 wlan.N[0] AppleBCMWLANCore::start(): Starting with MAC Address: <<<mac address>>>
[13:48:10.0360] 000828.946182 wlan.N[1] AppleBCMWLANCore::setPowerStateGated(): powerState 1, fStateFlags 0x20, dev 0xc476b000 (this 1, provider 0)
[13:48:10.0360] 000828.946197 wlan.N[2] AppleBCMWLANCore::setPowerStateGated(): Received power state change before driver has initialized, ignoring
[13:48:10.0360] IO80211Peer::addPhyStatistics Phy stats started for addr <<<mac address>>>
[13:48:10.0360] IO80211Peer::addPhyStatistics Tx Completion stats started for addr <<<mac address>>>
[13:48:10.0360] IO80211PeerManager::initWithInterface cant add monitoring timer
[13:48:10.0360] Started logging for intf
[13:48:10.0360] IO80211PeerManager::initWithInterface: inited peer manager
[13:48:10.0360] IO80211Interface::init peerManager=0x87cb8800
[13:48:10.0360] start:156
[13:48:10.0360] start:156
[13:48:10.0360] AppleARMBacklight::start: No AAP function
[13:48:10.0360] [effaceable:INIT] found current generation, 90, in group 1
[13:48:10.0360] [effaceable:INIT] started
[13:48:10.0360] [effaceable:INIT] started
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49152 62078<-usb->4608
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49153 62078<-usb->4864
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888adec8 established 62078<-lo0->49154 62078<-usb->5120
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49155 62078<-usb->5376
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888adec8
[13:48:10.0360] recv(13, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade18
[13:48:10.0360] recv(14, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49156 62078<-usb->5632
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49157 62078<-usb->5888
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49158 62078<-usb->6144
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49159 62078<-usb->6400
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49160 62078<-usb->6656
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49161 62078<-usb->6912
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49162 62078<-usb->7168
[13:48:10.0360] unrecognized key 'BootArgs' in value query
[13:48:10.0360] failed to handle value query for key 'BootArgs', sending back empty response
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49163 62078<-usb->7424
[13:48:10.0360] unrecognized key 'MarketingPartNumber' in value query
[13:48:10.0360] failed to handle value query for key 'MarketingPartNumber', sending back empty response
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49164 62078<-usb->7680
[13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
[13:48:10.0360] recv(9, 4) failed: connection closed
[13:48:10.0360] unable to read message size: -1
[13:48:10.0360] could not receive message
[13:48:10.0360] client protocol version 13
[13:48:10.0360] *** UUID 4B2AC217-7071-EC47-8945-EB5E2188BE49 ***
[13:48:10.0360] Restore options:
[13:48:10.0360] UUID => <CFString 0x19315c0 [0x2f3ad0]>{contents = "4B2AC217-7071-EC47-8945-EB5E2188BE49"}
[13:48:10.0360] MinimumSystemPartition => <CFNumber 0x1931510 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
[13:48:10.0360] SystemPartitionSize => <CFNumber 0x1930f50 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
[13:48:10.0360] SystemPartitionPadding => <CFBasicHash 0x192f3c0 [0x2f3ad0]>{type = mutable dict, count = 5,
[13:48:10.0360] entries =>
[13:48:10.0360] 2 : <CFString 0x1931540 [0x2f3ad0]>{contents = "128"} = <CFNumber 0x1931570 [0x2f3ad0]>{value = +1280, type = kCFNumberSInt64Type}
[13:48:10.0360] 3 : <CFString 0x1930f20 [0x2f3ad0]>{contents = "16"} = <CFNumber 0x192f3f0 [0x2f3ad0]>{value = +160, type = kCFNumberSInt64Type}
[13:48:10.0360] 4 : <CFString 0x192ede0 [0x2f3ad0]>{contents = "32"} = <CFNumber 0x1931250 [0x2f3ad0]>{value = +320, type = kCFNumberSInt64Type}
[13:48:10.0360] 5 : <CFString 0x1931960 [0x2f3ad0]>{contents = "8"} = <CFNumber 0x192ed50 [0x2f3ad0]>{value = +80, type = kCFNumberSInt64Type}
[13:48:10.0360] 8 : <CFString 0x1931180 [0x2f3ad0]>{contents = "64"} = <CFNumber 0x1931950 [0x2f3ad0]>{value = +640, type = kCFNumberSInt64Type}
[13:48:10.0360] }
[13:48:10.0360]
[13:48:10.0360] entering load_sep_os
[13:48:10.0360] device has no sep
[13:48:10.0360] entering partition_nand_device
[13:48:10.0360] device supports boot-from-NAND
[13:48:10.0360] nand device is already partitioned
[13:48:10.0360] entering wait_for_storage_device
[13:48:10.0360] Searching for NAND service
[13:48:10.0360] Found NAND service: IOFlashStoragePartition
[13:48:10.0360] NAND initialized. Waiting for devnode.
[13:48:10.0360] entering clear_remap_variable
[13:48:10.0360] executing /usr/sbin/nvram
[13:48:10.0360] entering format_effaceable_storage
[13:48:10.0360] effaceable storage is formatted, clearing it
[13:48:10.0360] effaceable storaged cleared
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] AppleD1972PMUPowerSource: limiting USB input current to 390 mA (measured 462 mA)
[13:48:10.0360] ** /dev/rdisk0s1s1
[13:48:10.0360] Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360] The volume name is Sochi11D257.N42OS
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume Sochi11D257.N42OS appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
[13:48:10.0360] entering check_for_restore_log
[13:48:10.0360] found restore log (size = 28347)
[13:48:10.0360] entering unmount_filesystems
[13:48:10.0360] error unmounting '/mnt2': Invalid argument
[13:48:10.0360] entering clean_NAND
[13:48:10.0360] NAND format complete
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0 system= data=
[13:48:10.0360] entering format_storage_for_LwVM
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] unexpected partition 'LwVM' - skipping
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system= data=
[13:48:10.0360] entering create_filesystem_partitions
[13:48:10.0360] User specified system partition size, skipping firmware extras size.
[13:48:10.0360] system partition padding size is: 167772160 bytes
[13:48:10.0360] unable to open : No such file or directory
[13:48:10.0360] creating 2 partitions
[13:48:10.0360] creating encrypted data partition
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] wipe entire partition: 1 (old = 0 new = 1820)
[13:48:10.0360] block size for /dev/disk0s1s1: 4096
[13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[13:48:10.0360] block size for /dev/disk0s1s2: 4096
[13:48:10.0360] /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
[13:48:10.0360] executing /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
[13:48:10.0360] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] entering mount_filesystems
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] ** /dev/rdisk0s1s1
[13:48:10.0360] Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360] The volume name is System
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume System appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] ** /dev/rdisk0s1s2
[13:48:10.0360] Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360] The volume name is Data
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume Data appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s2 mounted on /mnt2
[13:48:10.0360] entering resize_system_partition_to_options
[13:48:10.0360] User specified system partition size, skipping firmware extras size.
[13:48:10.0360] Found SystemPartitionPadding value of 167772160 bytes
[13:48:10.0360] Erasing system partition prior to resize operation.
[13:48:10.0360] block size for /dev/disk0s1s1: 4096
[13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
[13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[13:48:10.0360] executing /sbin/fsck_hfs
[13:48:10.0360] ** /dev/rdisk0s1s1
[13:48:10.0360] Executing fsck_hfs (version hfs-277.10.5).
[13:48:10.0360] ** Checking Journaled HFS Plus volume.
[13:48:10.0360] ** Detected a case-sensitive volume.
[13:48:10.0360] The volume name is System
[13:48:10.0360] ** Checking extents overflow file.
[13:48:10.0360] ** Checking catalog file.
[13:48:10.0360] ** Checking multi-linked files.
[13:48:10.0360] ** Checking catalog hierarchy.
[13:48:10.0360] ** Checking extended attributes file.
[13:48:10.0360] ** Checking volume bitmap.
[13:48:10.0360] ** Checking volume information.
[13:48:10.0360] ** Trimming unused blocks.
[13:48:10.0360] ** The volume System appears to be OK.
[13:48:10.0360] executing /sbin/mount_hfs
[13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
[13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
[13:48:10.0360] Trying to resize system partition to 1908408320 bytes aka 1820 MB
[13:48:10.0360] entering adjust_partition_preflight
[13:48:10.0360] partition:0 requiredSize=465920
[13:48:10.0360] no change in size
[13:48:10.0360] Successfully resized the system partition
[13:48:10.0360] entering maximize_data_partition
[13:48:10.0360] entering adjust_partition_preflight
[13:48:10.0360] partition:1 requiredSize=<<<<<IMEI>>>>>>6
[13:48:10.0360] maximizing data partition to 13946060799 bytes
[13:48:10.0360] entering adjust_partition_preflight
[13:48:10.0360] partition:1 requiredSize=3404800
[13:48:10.0360] no change in size
[13:48:10.0360] Successfully resized data partition to consume free blocks
[13:48:10.0360] The system partition now has a total HFS+ capacity of 1820 MB
[13:48:10.0360] entering ramrod_probe_media
[13:48:10.0360] device partitioning scheme is GPT
[13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[13:48:10.0360] entering unmount_filesystems
[13:48:10.0360] entering ramrod_ticket_update
[13:48:10.0360] looking up root ticket hash
[13:48:10.0360] device tree ticket-hash: <CFData 0x1930040 [0x2f3ad0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[13:48:10.0360] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
[13:48:10.0360] received valid ticket (2741 bytes)
[13:48:10.0360] entering restore_images
[13:48:10.0360] Successfully marked device node /dev/rdisk0s1s1 as static data
[13:48:10.0360] executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
[13:48:10.0360] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[13:48:10.0360] void AppleUSBDeviceMHello gamavranje,
Thanks for using Apple Support Communities.
The icons you're seeing on your iPhone indicate it is in recovery mode. Please plug your iPhone into your computer, and restore it with iTunes.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Take care,
Alex H. -
I have a Iphone 4 and after the last software update iOS.0.4, my phone is no longer connecting to the wifi at my house.
My MacBook Air is connected and my roommates phones are also connected, but my iphone that always was connected to the same network is no longer connecting to the wifi.
The network is shown on the device but I can't join it.
Whats going on? Does someone know how to solve this issue?
Thank you!Problem persisted after fixes were done so wife called apple today. Their fix is to turn cellular off when in the house and turn it back on when she leaves- the 4 doesn't keep the password so she has to enter the password too... This wasn't a fix ...it's just resolving the connection problem... They also said that they made ios6 have security features so nobody can hack into the wifi without having the password and it has to be entered to use the wifi. My 5 and the iPads stay on with no problems. It's just the 4. So far so good...she's had wifi all day when home. It's inconvenient but it's either completely reboot it with iTunes (which doesn't work for her) or buy a new phone and she won't do that either.
So...Apple is saying that she didn't have to do the updates either and could've stayed with the previous iOS but !!!too late now!!! We've updated because we think our phones will run better but the ios6 just made it a pita for users
I wonder if the hackers of the world are having as many issues as the peeps who are just trying to use their wifi?? -
when i update my software to 6.1.3(10B329)to I phone 4s the wifi is not working and not auto join the network that i have already connected to
First, grow up. Just because YOUR phone isn't working, doesn't mean Apple put out bad software. I've not had any difficulty, nor has anyone else I know. And just how is Apple risking lives with Bluetooth kits not working? It's YOUR decision to talk on the phone or text and drive. Not Apple's.
We're users here, volunteering our time to help others. Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help. Not to mention, it makes you look absolutely foolish.
Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
Good luck getting help.
GDG -
I have just updated the i06 software for my iPad and it will not connect to my home wifi network - all my other devices are able to connect to my wifi network.
I have attempted all troubleshooting actions suggested and nothing has worked. I have restored my iPad network and factory settings - Please help - this is frustrating meyou have to set up your router to solve th problem. first find and write down the ipad mac address.
then log on to your router using your laptop or any device that can connect to router at 192.168.0.1 in your web browser. please check out my posting about how to resolve the wifi connection problem.
i think the ios6 update has reset the networking but if you set up the router then you should not have the same problem any more. -
I am connected to my usual wifi and when I try to go onto any app's which require Internet connection, it says I have no Internet connection yet I am connected to wifi, how do I resolve this?I have had this problem for about a week.
Any responses are appriciatedYou posted in the iPad forum, but you profile lists an iPhone 4S. Does your iPhone or iPad have this problem.
Here's some iPad suggestions. Most also apply to the iPhone. Your iPhone or iPad may show the wifi symbol but that only shows the presence of a wifi signal. Not that you are connected.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Update to ios 6.1, but still no connection to wifi...
im using an iphone 4s, from ios 6 to ios 6.0.1 and finally ios 6.1, never ever got connected to the wifi at home or office....im very disspointed...
Possible solution. After researching this for a friend (iPhone 4S) here and elsewhere online, turned out he had AppleCare and a phone call to Apple solved the problem. The Apple tech told him that this occurs in less than 1% of iPhones, and is almost always related to a glitch during a system update over wi-fi. He said people spend too much time on support boards, and should be calling Apple! (lol).
The solution is to plug the phone with a USB cable into iTunes on a computer and do a manual "Back Up Now" of the iPhone to "This Computer", not iCloud. Then completely reset the iPhone to factory settings, using "Restore iPhone" in iTunes, or "Erase All Contents and Settings" in Settings - General - Reset on the phone. Then "Restore Backup", again using iTunes. My friend said this fixed the "grey-out" wi-fi settings slider, and restored full connectivity, and he didn't lose any data. Hope this helps some of you! (I personally had no problem with my own iPhone 5). -
After i updated to ios7.0.3 always says cannot connect to network on my wifi
cannot connect to my normal wifi connection now it tells me unable to join the network what does this mean what do i have to do to fix it???
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom  -
I updated my software in my iPad, can't connect to App Store or iTunes, It says that I have to change to US account, right now I'm in Mexico, how can I change it to my US account
Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
8.8.8.8
8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist. -
How to connect my iphone to imac on wifi
Hi
I want to connect my iphone to imac on wifi. Actually i want to use internet on my iphone. So how can i do this ?If you have a wifi router you can set up/turn on the wifi... set the user name and password wifi in your router... open wifi in general settings on the iPhone... log into your router, user name and password. (If your don't know how to turn on the router wifi. Google the router make and model and you will find instructions on how to do this.)
If you don't have a wifi router and your Mac has wifi capabilities you can hookup to the internet over wifi from your Mac to your iPhone.
System Preferences on the Mac... Network... Wifi... Advanced tab... Hit the '+' to add a user name and password...
Make sure you use WPA2 Personal for Security... Hit ok... Turn on the wifi... Same as above with the iPhone, log into your wifi settings on the iPhone.
*Important point... Use WPA2 for the encryption/Security setting. If you use anything else for this setting, your wifi can be hacked. -
hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.
System Preferences > Network > WiFi
To give a network the highest priority, drag the name of the network to the top of the list. This is the network your computer will attempt to join first.
http://support.apple.com/kb/PH13797 -
How can I update backup of iPhone at iCloud without wifi?
Hi Expert, Can anyone suggest how can I update backup of iPhone at iCloud without wifi? Wifi stopped working on my 4s after upgrade to iOS7. I have iTune backup but want to update at iCloud. Any suggestion? Thanks in advance.
You can't. iCloud backups can only be done over wifi.
~Lyssa -
While updating my apps, I lost my wi-fi connection. I have since tried to update the apps several times...but none of them are updating. Each time I try to update the apps, I enter my password, but then nothing happens. Thank you - Chris
Hold the power button and the home button down until the screen goes black and the apple logo appears. This will do a reset and you should be able to update your apps then.
Maybe you are looking for
-
Problems with UPDATING Safari 3.1.2
The software update checker indicates that a new version of Safari is available and version 3.1.2 should be updated; I download the update, but then get the message: "The update "Safari" can't be saved. You do not have appropriate access privileges."
-
I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?
-
IPhone got virus through email - doesn't affect phone but has spread to PC
I had a Windows Vista computer that would boot up and programs could open but, once opened, the programs were totally unresponsive. The mouse worked, but wouldn't click on any part of an open window (not anything - browser window, Word, Excel...nothi
-
[SOLVED][FIREFOX] All site are untrusted after a crash during update
Hi, I wanted to do an update of my system with `pacman -Syu` but when it was working on firefox it had a freeze, maybe because I left a firefox window opened. The computer didn't respond and so I had to do a hard reboot of it. When I came back I retr
-
Just started using Motion today. When I start a Tutorial, Template or even a blank file the canvas stays white and won't display anything. If I set the video output to my second monitor the project plays back perfectly but still nothing on the canvas