I'm a beginner. Creating clips with sub-title captions from a large file.

My project is to create a video clip with subtitles that will help train ESL students to correctly hear native speakers. The idea is simple. The same clip repeats 3 times, first without subs, then with subs and finally without them. So, I have some full length movies, in various ripped formats, that I need to select short dialog sequences from, each of which is destined to become a separate file. Once I have the shorter files I will repeat the sequence three times in the file and embed captions in the middle copy. I may also add some footage into the file in various places to give instructions on the exercise.
I imported an avi file into Premiere but could not figure out how to select a portion of the original file and create a clip and save it as a new file. Also, while the file plays in sync in media player software, the audio was way out of sync in Premiere. I've searched for tutorials and watched quite a few but I haven't been able figure this out. I was hoping someone could point me in the right direction.

Mappa01 wrote:
> Hello everyone, as the title suggests, I am very much a
beginner at the SPRY
> menus, so please bear with me.
>
> I have implemented a tabbed panel in my website,
however, when I click on a
> link, it sets the menu back to the first tab, rather
than the tab of the topic
> i am in.
Yes, this is what is supposed to happen, unless you "tell"
the tabs differently. Take a read up on this page:
http://foundationphp.com/tutorials/spry_url_utils.php
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

Similar Messages

How to create folder with sub folder ?

How to create folder with sub folder ?

Hi,
Questions. 17 / 17 unresolved -> very bad reputation
but ok - let's help anyway ...
1. create everything in Screen Painter
2. set FromPane and ToPane property correct.
example:
Items in MainFolder: FromPane & ToPane: 1 to 3
Items in SubFolderA (From 2 To 2) - SubFolderB (From 3 To 3)
shouldn't be that difficult
in your Code set oForm.PaneLevel when the user clicks on the Folder
lg David

Hi everybody, I am trying to create a DVD pal without menu with the program iDVD from a .mov file. Any ideas? Thanks so much.

Hi everybody, I am trying to create a DVD pal without menu with the program iDVD from a .mov file. Any ideas? Thanks so much.

(From fellow poster Mishmumken: )
How to create a DVD in iDVD without menu (there are several options):
1. Easy: Drop your iMovie in the autoplay box in iDVD's Map View, then set your autoplay item (your movie) to loop continously. Disadvantage: The DVD plays until you hit stop on the remote
2. Still easy: If you don't want your (autoplay) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the dropzone (text needs to be black as well). Disadvantage: The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time: Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage: One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software: Roxio Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn. Disadvantage: you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way": Postproduction with myDVDedit (freeware)
Tools necessary: myDVDedit ( http://www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned.If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager:
http://lonestar.utsa.edu/llee/applescript/dvdimager.html
Our resident expert, Old Toad, also recommends this: there is a 3rd export/share option that give better results. That's to use the Share ➙ Media Browser menu option. Then in iDVD go to the Media Browser and drag the movie into iDVD where you want it.
Hope this helps!

Creating background for sub-titles?

I remember in FCP7 I could make a custom 'solid' clip, resize it small, make semi-opaque, position it behind the sub-title, then use some kind of edge-softening plug-in from the effects bin ... which would take away the sharp edges of the semi-opaque solid clip ... which I would then make just enough opaque to make the text stand out, but not enough so the background shadow clip was obvious.
I'm trying to figure out if there is a way in FCPX to blur and soften the edges of a Custom solid?

Thank you Tom,
I scanned through a couple of times ... must have been looking for 'feathering' ... tired eyes.
Very much appreciated,
Ben

Airport Extreme with Ubee D3.0 - cannot download large files.

Hello all Macoids!
Here is my issue...
I am on Charter Cable Network using Charter's provided modem Ubee D3.0 It is connected to an AirPort Extreme "main base" vie ethernet cable. That AirPort Extreme that I call "main base" distributes the WiFi throughout the apartment to other AirPort devices. And it all works.
However...
I cannot download large files on Wi-Fi using iMac or even while connected to the AirPort Extreme main base via ethernet cable on my MacBook. What is interesting that inside of iTunes I can download large files with TV shows episodes just fine, but the update to an iPhone or an iPad will stop after 10 or 100 megs with error message "Unknown Error 9006" occurred. Interestingly enough, if I will drag the Download window in iTunes around while it is downloading 1.4 gig iOS update file for iPhone 5 - it will complete fine. So it looks like Airport main base (or whichever Mac is used) looses the connection to a download server or Ubee D3.0 modem, unless I constantly "renew" it by dragging the Download window around.
That is quite annoying to do for 15-20 minutes… Same happens on MacBook Pro that is actually connected to an AirPort Extreme main base via ethernet cable...
Macbook running OS 10.9
iMac running OS 10.8.5
Same thing.
I would've call Charter but knowing well they have usually no idea what is up I thought to ask here if anyone has the same problem….?
Any smart suggestions not based on experience?
Anything appreciated very much!

I ended up reformatting with HFS and the problem was solved, sort of. The AEBS can now handle large files. But that allowed me to expose yet another serious firmware bug (version 7.6.1), namely that if you use "account" style fileshares, the fileshares are not reliably accessible anymore, and frequent rebooting of the AEBS is needed to bring them back. A quick test for whether this has happened is just attempt at ten-minute intervals to create a file on a read-write share. You'll find it can work for up to a few hours, but at some point it will fail. Makes the AEBS essentially unusable for account-based fileshares. I
With firmware 7.5, I'd noticed a variation of this problem, which was that editing the fileshare permissions on the AEBS resulted sometimes in a corruption of the fileshare rights. When this happened, you needed to reinitialize the AEBS completely. So I hoped that in 7.6 they fixed the probems. They fixed that one but added the new one.
For now, the workaround seems to be using a device-based password for the fileshares, and forgetting about account-based shares. The huge problem presented by this approach is that all users have full access, so I await Apple's next attempt at stable firmware with great anticipation. If only they had a beta test program, other than their users, we would not be in this near-constant state of working around serious bugs.

BAPI_PO_CREATE1 not able to create PO's for multiple rows from the flat fil

Hi
i am uploading PO's from a flat file into SAP using the BAPI_PO_CREATE1. Everything works fine if the flat file hast only one record.
if the flat file has more than one record then while loading the second record the BAPI returns a error message. I am calling the BAPI in a loop.
The strange thing is that if i load the second record individually the program is able to create the PO. So only when i have multiple records in the flat file i am unable to load the PO into SAP. I debugged and checked all the internal tables passed to the BAPI. All seems to have the data correctly but still the BAPI fails.
any idea where i am going wrong?
the code looks something like this.
LOOP AT HEADER_ITAB.
   PERFORM FILL_HEADER_RECORDS.
LOOP AT ITEM_ITAB WHERE EBELN eq HEADER_ITAB-EBELN.
     PERFORM FILL_ITEM_RECORDS.
ENDLOOP.
PERFORM CERATE_PO_VIA_BAPI.
ENDLOOP.

What is the error message. Are you trying something like this:
    LOOP AT T_DATA1.
      AT NEW LIFNR.
        READ TABLE T_DATA1 INDEX SY-TABIX.
        PERFORM INIT_TABLES.
        PERFORM FILL_DATA.
--Call the BAPI to create PO
        PERFORM CREATE_PO.
      ENDAT.
    ENDLOOP.
FORM CREATE_PO .
CALL FUNCTION 'BAPI_PO_CREATE1'
    EXPORTING
      POHEADER                     =   POHEADER
      POHEADERX                    =   POHEADERX
    POADDRVENDOR                 =
    TESTRUN                      =
    MEMORY_UNCOMPLETE            =
    MEMORY_COMPLETE              =
    POEXPIMPHEADER               =
    POEXPIMPHEADERX              =
    VERSIONS                     =
    NO_MESSAGING                 =
    NO_MESSAGE_REQ               =
    NO_AUTHORITY                 =
    NO_PRICE_FROM_PO             =
   IMPORTING
     EXPPURCHASEORDER             = EXPPURCHASEORDER
     EXPHEADER                    = EXPHEADER
     EXPPOEXPIMPHEADER            = EXPPOEXPIMPHEADER
   TABLES
     RETURN                       = RETURN
     POITEM                       = POITEM
     POITEMX                      = POITEMX
    POADDRDELIVERY               =
     POSCHEDULE                   = POSCHEDULE
     POSCHEDULEX                  = POSCHEDULEX
     POACCOUNT                    = POACCOUNT
    POACCOUNTPROFITSEGMENT       =
     POACCOUNTX                   = POACCOUNTX
    POCONDHEADER                 =
    POCONDHEADERX                =
     POCOND                       = POCOND
     POCONDX                      = POCONDX
    POLIMITS                     =
    POCONTRACTLIMITS             =
    POSERVICES                   =
    POSRVACCESSVALUES            =
    POSERVICESTEXT               =
    EXTENSIONIN                  =
    EXTENSIONOUT                 =
    POEXPIMPITEM                 =
    POEXPIMPITEMX                =
    POTEXTHEADER                 =
      POTEXTITEM                   = POTEXTITEM
    ALLVERSIONS                  =
     POPARTNER                    = POPARTNER
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      WAIT   = 'X'
    IMPORTING
      RETURN = RETURN1.
DATA: L_NAME TYPE LFA1-NAME1.
CLEAR L_NAME.
SELECT SINGLE NAME1
           FROM LFA1
           INTO L_NAME
           WHERE LIFNR = POHEADER-VENDOR.
LOOP AT RETURN.
    WRITE : / RETURN-TYPE,
              RETURN-ID,
              RETURN-MESSAGE.
    WRITE : '--> For vendor:',
             POHEADER-VENDOR,
             L_NAME.
ENDLOOP.
ENDFORM.                    " CREATE_PO

Problem parsing XML with schema when extracted from a jar file

I am having a problem parsing XML with a schema, both of which are extracted from a jar file. I am using using ZipFile to get InputStream objects for the appropriate ZipEntry objects in the jar file. My XML is encrypted so I decrypt it to a temporary file. I am then attempting to parse the temporary file with the schema using DocumentBuilder.parse.
I get the following exception:
org.xml.sax.SAXParseException: cvc-elt.1: Cannot find the declaration of element '<root element name>'
This was all working OK before I jarred everything (i.e. when I was using standalone files, rather than InputStreams retrieved from a jar).
I have output the retrieved XML to a file and compared it with my original source and they are identical.
I am baffled because the nature of the exception suggests that the schema has been read and parsed correctly but the XML file is not parsing against the schema.
Any suggestions?
The code is as follows:
public void open(File input) throws IOException, CSLXMLException {
    InputStream schema = ZipFileHandler.getResourceAsStream("<jar file name>", "<schema resource name>");
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = null;
    try {
      factory.setNamespaceAware(true);
      factory.setValidating(true);
      factory.setAttribute(JAXP_SCHEMA_LANGUAGE, W3C_XML_SCHEMA);
      factory.setAttribute(JAXP_SCHEMA_SOURCE, schema);
      builder = factory.newDocumentBuilder();
      builder.setErrorHandler(new CSLXMLParseHandler());
    } catch (Exception builderException) {
      throw new CSLXMLException("Error setting up SAX: " + builderException.toString());
    Document document = null;
    try {
      document = builder.parse(input);
    } catch (SAXException parseException) {
      throw new CSLXMLException(parseException.toString());
    }

I was originally using getSystemResource, which worked fine until I jarred the application. The problem appears to be that resources returned from a jar file cannot be used in the same way as resources returned directly from the file system. You have to use the ZipFile class (or its JarFile subclass) to locate the ZipEntry in the jar file and then use ZipFile.getInputStream(ZipEntry) to convert this to an InputStream. I have seen example code where an InputStream is used for the JAXP_SCHEMA_SOURCE attribute but, for some reason, this did not work with the InputStream returned by ZipFile.getInputStream. Like you, I have also seen examples that use a URL but they appear to be URL's that point to a file not URL's that point to an entry in a jar file.
Maybe there is another way around this but writing to a file works and I set use File.deleteOnExit() to ensure things are tidied afterwards.

Menu made in movie clip - with sub-section we can click on to go to another frame

I would like some help about that:
I want to do a menu made all in movie clip (NO button). In
this menu, when we click on one of the part (sub-section) of the
button (which is a mc), we must go to another frame in the main
scene.
It is working for the roll-over and mousedown for my button
(with the _up, _over and _down labels). But it's not working then
to put, i don't know, another movie clip inside with alpha 0 to
make another onRelease and then gotoAndStop(20); ...
Here is the code I have in the main scene (first frame):
stop();
mon_clip_mc.onRelease = function() {
//this._root.gotoAndStop(20);
And here is the code I have in the first frame of the movie
clip of the button:
stop();
I'd really appreciate some help! Thanx

lalapinerouge,
as far as I can see with your method for buttons, is that it
only reads 1 button inside mon_clip_mc..
I cant figure out why, i've tested it over, made new fla's
with your method, and i still cant get it to work, nor do I
understand why..
I need to study abit more.
Maybe someone in the Forum will have a look at this topic,
and know what's going on with your method.
In the mean time, heres a submenu I made for a site a while
ago. This doesnt use timeline actionscript, ( because i was a
newbie then ) =)
if you have a look through the whole FLA, ( it's quite abit)
you can get an Idea of how i do my movie clip buttons, till this
day, i still use the same method, only i use mainly timeline
actionscript..
the main point to notice is that EVERY button ( even submenu
) is it's own movieclip...no button in there holds multiple sub
buttons inside... This gives you complete control of each button,
and endless possibilities for animation, tweens, and anything extra
you would want to add to a button.
Sorry I couldnt help you figure out your problem fully. Im
still going to mess around with it abit more to see if i can figure
it out..
Hope you can addopt some useful info from this FLA.
HERE

Create Folder with DDX in PDF Portfolio or add files to Folder

can I create folders in a PDF file same as we do with the Adobe Acrobat Portfolio using only DDX? I tried using PackageFiles, but had no results.

The Assembler service in LiveCycle ES (8.2) does not provide a way to specify folders within a PDF portfolio.
For more information about PDF portfolio capabilities in LiveCycle 8.2, see Using Assembler to Create PDF Portfolios.

Create Folder with DDX in PDF Package and add files in an specific Folder

Hi everyone, I can create a package or portfolio that contains a directory structure and add pdf documents at different times to a specific directory and expand its content similar to a digital file which incrementally add documents?
If you know of any example would help me a lot.
Thanks.

The Assembler service in LiveCycle ES (8.2) does not provide a way to specify folders within a PDF portfolio.
For more information about PDF portfolio capabilities in LiveCycle 8.2, see Using Assembler to Create PDF Portfolios.

Creating Gutter with Boris Title Crawl

Hello all!
I'm doing the end credits for a DV project and as we all know Boris is better than Final Cut's text generators. Just wondering if there's a feature in Boris a la the * in FCP's Scrolling Text generator. You know, to line up those gaps. I've fidgeted and can't find it.
Michael

*This is very annoying - because the problem comes about at the the tail end of projects when I'm trying to export files to create DVDs, make deadlines, etc.*
Not an answer to your question... I've never used Boris title crawl. But a suggestion that might save you time when trouble shooting... You can just export the title sequence at the end of your show as a test to verify if it's working properly rather than exporting the whole thing only to find you still have an issue.
rh

Hello i'am french and i want to progress in english. I try to rent english movies or series with sub titles in english, someone can help me to configue my ipad to do that ?

Hello
I try to rent english movies with english subtitles from appstore
Some can to help me ?

Deleting them from your Mac won't affect what is on your PC, the message just means that it will be removed from any device that is synced to your Mac's iTunes. If your devices will continue to be synced to your PC then you can safely delete them from your Mac without affecting them.

Safari 7.1 creates problems with drop down menus from some sites

I blindly install Apple updates, but with Safari 7.1 I run into problems with the drop down menu of www.arcweb.com. As this is my main client it is a big problem. Any suggestions or solutions?
thanks
Jean

Empty Caches.
1. Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    "Develop" menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
2. Quit Safari if open.
    Option click the "Go" menu in the Finder menu bar.
    Select "Library" and then "Caches".
    Look for the folder 'com.apple.Safari"
    Right click "com.apple.Safari" and select "Move to Trash"
    Relaunch Safari.

Dynamic Link (Adobe Premiere Pro to Encore) issues with burning a DVD from the project file

Hello,
I am running Adobe Suite CS 5.1 on my Mac:
2.8 GHz Quad Core
6GB Memory
I've been having issues with a few projects; using Dynamic Link, directly from my project in Premier, to send them to Encore:
When attempting to burn a DVD, Encore will 'hang up' and not burn; I rarely burn to DVD, usually I'm always encoding for web, and just always use the 'default settings' in Encore.
A few things to note:
*In my project I'm using MOV files, from a Canon 7D, and MP4 files, from a Sony EX-1.
*I am working off of 3 separate hard drives; very large projects with over 5TBs of media files.
*I noticed that after inserting a DVD, it caused one of my hard drives to eject; this happened once, as far as I know.
*This only happens when I use Dynamic Link to send to Encore, via my Premiere Pro project file.
*My Project settings are always: XDCam HD-1080p/24p
Please help.
Thanks

So you must downrez at some point in the workflow. Some users have problems and/or think they get better quality out of direct PR/AME exports than using DL for this purpose.
I would test the workflow by creating three short test sequences - one with a clip from one camera, a second from the other, and a third with both in a sequence using the same settings you are using in your edit. I would use the "drag a clip" to the new item method for making each of the first two sequences. By short I mean 30 seconds to 2 minutes with a mixture of still and action.
Export using whatever method you pick of those recommended, but use CBR 8 instead of VBR etc. Bring the resulting files into Encore. Yes, look at the files exported on the computer, and look at Encore preview, etc, but also burn to a disk and watch on multiple TVs. There are lots of issues in best quality.

Creating a new title template from a .psd file

We weren't happy with any of the lower thirds that Premiere had for us, so I got one of the people in my office to create a lower third that would look nicer, but now I've just got this .psd image that I don't seem to be able to get into title form.
Its just an image of a thought bubble that says "science tips" and then a darly shaded rectangle with blue text inside of it, but when I try to import the .psd image as a logo in the titler screen it comes up with the thought bubble very washed out and see through ( the thought bubble is white on the inside in the .psd file) and the darkly shaded area doesn't show up at all.
I fell this may be a photoshop error on my part as likely as anything else, but mostly, I'm wondering if bringing it in as a logo is the right way to go?
-Dan

Ann,
I like that workflow.
I handle my "custom" Lower-Thirds (or similar) just a bit differently. I create the artwork in PS, and then Import that as an Asset. I'll then do a regular Title for just the text, placing it above the PSD of my graphic. My workflow does mean that I will need to Import that PSD into each Project, but I put a copy into my Common Assets folder, for ease of Importing, as is required. I can also individually animate each element, as is needed. If I wish to animate the Layered elements of the graphic, I'll Import as a Sequence, keeping my Layers, but with Lower-Thirds, I usually end up animating both the graphic and the text as a unit, i.e. the same Keyframing for each of those elements.
Your method will all one to do a full Save_As a Template, and allow for easy changes of the text, as the graphic is but a logo. Neat!
Thanks,
Hunt

I'm a beginner. Creating clips with sub-title captions from a large file.

Similar Messages

Maybe you are looking for