I'm a Canadian wishing to publish interactive books for both the Canadian and US markets. However, I've heard that Canadians would/do not have access to these interactive textbooks. Has this changed? If not, is there any indication that it will?
I'm a Canadian wishing to publish interactive books for both the Canadian and US markets. However, I've heard that Canadians would/do not have access to these interactive textbooks. Has this changed? If not, is there any indication that it will?
US only at this time.
Apple doesn't discuss future plans, sorry.
As always, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html
Similar Messages
-
sound on my phone has gone so when someone calls me they can hear me but i cant hear them.The ticks cant be heard when you press the keyboard. I've checked the settings and they are ok. can still hear music thru headphones but not without. Any help pls.
Hey shahbazfromgbr,
Thanks for the question, and welcome to Apple Support Communities.
I understand you are having issues with sound output on your iPhone 4S. For troubleshooting steps, the following article provides the best information:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
1. Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
2. Make sure the Ring/Silent switch is not switched to silent.
3. While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
4. Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
5. For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
6. If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
7. Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
8. If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
9. Restart the iPhone.
10. If restarting the iPhone doesn't resolve the issue, try restoring the device.
11. If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks,
Matt M. -
Can we put INDEXES on Views if not Is there any way to make it Index bas
Hi
I am running a query in which there are several views involved in the join condition Can we put INDEXES on Views in ORACLE 9i if not Is there any way to make it Index based views beacuse the result that i am getting is very slow and is eating like 10gb of the temp tablespace.
ThanksNo, you cannot put indexes on a view. Think about what a view is, a stored sql statement. Oracle has no way of knowing what rows are in a view until it actually runs the view. So, even if you could, Oracle would need to run the view to get the rows, build the index, then run your query a second time using the index. Seems counter productive to me. A view can use indexes on the underlying tables if appropriate.
Generally speaking, I would say that a query that makes use of multiple views is probably really inefficient. Often, you are only looking for one or two columns from a view which may require joining several tables whose columns are of no use in the main query. I would start by re-writing the query using the base tables, and only using those tables that are actually required to answer the question.
TTFN
John -
I have photos in a DVD. In order to visualize them in iPhoto, must I necessarily import them? Can't I see the pictures from the media without importing? If not, is there any application with this functionality? I need an app that allows me to navigate through the photos without selecting all of them. I realy dont't like pre-visualization for photos...
In order to visualize them in iPhoto, must I necessarily import them?
iPhoto is a Database. Before it can work with any data it must be imported to the database, so yes it is necessry to import them.
Can't I see the pictures from the media without importing?
See above.
If not, is there any application with this functionality?
Hundreds. Any image viewer will do the job. On your Mac the Finder has QuickLook and there is the Preview app as well. Online you can download any of these:
http://www.macupdate.com/find/mac/image%20viewer -
My airport express works on my MBPro 17 w/ 10.5.8 but not my MBAir11". The MBAir says that this version of Airport utility doesn't support this base station. Is ther any chance I can use this with my MBAir?
Is this an older "round" version of the AirPort Extreme? If yes, it is true that AirPort Utility 6.x no longer supports the older AirPort Extreme and AirPort Express models.
A model number......located on the bottom of the Extreme or on the side of the Express would be helpful to confirm what you have.
Apple probably does want you to buy a new AirPort Extreme.
The workaround might be to use a Mac or PC running a 5.x version of AirPort Utility.
A more complicated workaround would be to install AirPort Utility 5.6 on Mountain Lion. This is not supported by Apple......it does work for me.....but may not work for you. See this article for more details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html -
Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
Question 2 (related):
This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
Thanks for reading this.
el7Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7 -
Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way?
Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way? Please tell me what's the best solution if I want to present what's on the iPad screen to TV or projector withtout using internet network or small range of bluetooth.
yes
-
i just jupdated to IOs5 on my ipod touch when i go to my unlock screen the camera option is not always there any ideas?
You need to double click the Home button to get the camera button.
-
I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music?
Any ideas on how to correct this?
Thanks-VitaleyesI don't know what they call it, but my plantronics voyager pro, and my wifes plantronics voyager pro+ will not let you hear music through the headset. My Blueant T1 does support it and plays the music through the deadset.
-
i have an iphone 3gs in which sleep/wake button not working. i have got stuckn in an apple logo in my phone screen. is there any software or any solution to turn on or restore my phone?? Please help...and thaks in advance
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup.. Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 15 - 20 Seconds...
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Hi there. My iPod Nano was stolen from my car today. I do know the serial number of this stolen device. Is there any way that Apple can block another user from connecting this stolen device to iTunes? Also, if another user was to attempt to connect this stolen device to iTunes, would Apple be able to inform of the username of this person in order that I could then pass this information to the police?
Is there any way that Apple can block another user from connecting this stolen device to iTunes?
No.
Also, if another user was to attempt to connect this stolen device to iTunes, would Apple be able to inform of the username of this person in order that I could then pass this information to the police?
No. Apple can do nothing to help. Sorry.
Reporting a lost or stolen Apple product
B-rock -
what is up with this err = 9006? is there any solutions, this is ridiculous considering the time and money i'm wasting (mostly the time) i have seen no solutions thus far.
I've found the following on that page for error 9006 :
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
I have updated my iphone4 and all data have gone including photos contacts and notes .is there any solution?
All data that was on your iPhone should be on your computer.
All photos that were transferred to your iPhone from your computer should remain on your computer and can be retransferred. Photos/videos captured by the iPhone can and should be imported by your computer as with any other digital camera - especially before installing an iOS update. Re-transfer these photos from your computer as with any other photos available on your computer.
Contacts and notes are designed to be synced with a supported application on your computer, and there are some free email accounts that support syncing contacts and notes over the air. -
I am trying to switch laptops with my mom, and successfully wiped mine and restored it, but now the password that she used on her computer isn't working on this computer. Is there any logical reason why the two passwords would be different, if I restored her information from a Time Machine backup? Aditionally, Is there a way to bypass the password page on startup to make a password that my mom knows?
If Disk Warrior does not work you can try the following steps (but they may not work if the disk has a hardware error).
Get the disk (DVD or CD) that came with the system (since you have it listed as 10.6.8). If it is 10.7 or 10.8 use the Recovery partition to boot from or the USB installer if you have that option.
Insert the disk then power down
HOLDING the C key, power up to boot from the disc.
Get to Disk Utility
If Disk Utility will now show your hard drive, use DU to REPAIR the disk.
When it completes the Repair process successfully as indicated in DU, do a shut down. If Repair is not successful then an different course of action is indicated below.
Then HOLDING THE APPLE (or Command key depending on your keyboard) KEY AND THE OPTION KEY AND THE LETTER P AND R KEYS, continue hiolding them until you hear the chime tone for the THIRD time then release all four keys.
If REPAIR is not successful, use the Install disc as a boot and REINSTALL THE OS X OPERATING SYSTEM DO NOT ERASE THE DISK OR VOLUME FIRST. REPEAT DO NOT erase the disk or volume before trying to reinstall the OS X operating system. After re-installing the OS do a software update. Note that ERASING the disk is NOT required to do an OS re-install. This allows your existing data and application files to remain.
If that fails then you are down to the "bitter end" of erasing the volume and reinstalling the OS and then all the other software.
If erasing the Volume fails then your last hope is to completely erase the entire hard drive, repartion the disk and try a re-install.
If that fasils then you may have a defective hard disk. -
Hi, I HATE to ask for help with this, but I HAVE looked everywhere and Google searched different wordings and have not found anything similar nor a solution to my problem! My good old iPod 4th-gen charges just fine in any wall outlet, in any house, but when I connect it to my brand new ASUS laptop that has Windows-8 and 3.0 USB ports using the charging/data cable, the charging process just keeps "blinking" BOTH the iPod and the laptop and it will not connect to ITunes and I get "A Device is Detected" message that keeps popping up and going away over and over right above the Windows desktop toolbar. When I go to control panel and select "Devices" it does show the iPod, but for only a split second and than it disappears, but than it comes back again for a split second and than it disappears again and just keeps doing that over and over and over! I have tried resetting the iPod while it is plugged into the laptop by holding the power and menu buttons, that did no good. I also tried uninstalling iTunes and any other Apple stuff listed and reinstalling it all, that did NOT work! The iPod, the laptop and iTunes ARE all fully updated! I AM using a brand new charging/data cable that I just opened up an hour ago (I've learned to keep a few brand new ones around at all times since these piece of garbage rip-off cables hardly last a week, even when you baby them!). I also tried a few old cables, they all do the same thing! I would like to get this piece of junk to connect to my new laptop, even if only once, so that I can change/delete some songs and transfer a few dozen photos,since I haven't been able to do any of that stuff since my old laptop (that NEVER had any problems connecting) died way back in May! lol. I hope somebody knows a fix or solution! Thank You!
Try on another computer to help determine if iPod or computer problem.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
LV 8.2 Config File with Enum bug
Please refer to attachment. Set the Enum and run the VI. The Enum is converted into string and then saved into a config file. The file is immediately read and the key is converted back to enum. It works fine until you choose index 32 in the enum. Eit
-
User settings changed automatically
Hello, I have one user who had his desktop wallpaper changed back to the HP default and all his icons disappeared. I suspect it is a corrupt profile. I am unable to install Symantec Endpoint or run Trend Micro Housecall, however, I am able to run Bi
-
Download or upload module pool
Hi all, I want to know how can i download a module pool program entirely with all its code, screens, includes etc onto a local system and then upload the same into another local server. there is no connectivity between two servers. please share your
-
Hi, on 11g R2 on Win I run in SQLPLUS: variable stmt_task VARCHAR2(64); EXEC :stmt_task := DBMS_SQLTUNE.CREATE_TUNING_TASK(sql_id => '4rc7d8c0mvfm8'); EXEC DBMS_SQLTUNE.EXECUTE_TUNING_TASK(:stmt_task); SET LINESIZE 140 SELECT DBMS_SQLTUNE.REPORT_TUNI
-
Using a large, 16x20 240dpi photograph.... I created a completely non-feathered mask of a subject against a background (mask-view reveals black and white with no greys) I moved the subject with the content aware move tool. The portion where the sudbj