I'm a little confused about the vents...

At work I use my early 2011 MBP connected to an external monitor. The computer itself sits on a ThermaPAK to help cool it down, because I do graphic work it runs hot. I want to know if I close my MBP if it cuts off the ventaliation to the board and all because from what I understand the vents themselves are in the black strip? If it keeps the computer cooler, I have no problem using the external display soley and using an external keyboard and mouse (which I do anyway).
Tips and tricks?
Other ways to cool it down?

Ran it now, here's the results!
Hardware Information:
          MacBook Pro - model: MacBookPro8,2
          1 2 GHz Intel Core i7 CPU: 4 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 512 MB
          AMD Radeon HD 6490M - VRAM: 256 MB
Startup Items:
          NortonMissedTasks - Path: /Library/StartupItems/NortonMissedTasks
          SMC - Path: /Library/StartupItems/SMC
          SymAutoProtect - Path: /Library/StartupItems/SymAutoProtect
System Software:
          OS X 10.8.3 (12D78) - Uptime: 2 days 22:48
Disk Information:
          TOSHIBA MK5065GSXF disk0 : (500.11 GB)
                    disk0s1 (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (173.67 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. FaceTime HD Camera (Built-in)
          Mitsumi Electric Hub in Apple Extended USB Keyboard
                    Mitsumi Electric Apple Extended USB Keyboard
          Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
          com.rim.driver.BlackBerryUSBDriverInt          Version: 0.0.74
          com.eltima.SyncMate.kext          Version: 0.2.5b15
Problem System Launch Daemons:
                 [failed] com.apple.coresymbolicationd.plist
                 [failed] com.apple.printtool.daemon.plist
Problem System Launch Agents:
                 [failed] com.apple.coreservices.appleid.authentication.plist
                 [failed] com.apple.mrt.uiagent.plist
Launch Daemons:
                 [loaded] com.adobe.fpsaud.plist
                 [loaded] com.adobe.SwitchBoard.plist
                 [loaded] com.avatron.airconnect.daemon.plist
                 [loaded] com.barebones.authd.plist
                 [loaded] com.cisco.anyconnect.vpnagentd.plist
                 [loaded] com.google.keystone.daemon.plist
                 [loaded] com.microsoft.office.licensing.helper.plist
                 [loaded] com.rim.BBDaemon.plist
             [not loaded] com.teamviewer.teamviewer_service.plist
                 [loaded]          rapiback.plist
Launch Agents:
             [not loaded] com.adobe.AAM.Updater-1.0.plist
                 [loaded] com.adobe.CS4ServiceManager.plist
                 [loaded] com.adobe.CS5ServiceManager.plist
                 [failed] com.brother.LOGINserver.plist
                 [loaded] com.cisco.anyconnect.gui.plist
                 [loaded] com.citrix.AuthManager_Mac.plist
                 [loaded] com.citrix.ReceiverHelper.plist
                 [loaded] com.citrix.ServiceRecords.plist
                 [loaded] com.google.keystone.agent.plist
                 [loaded] com.rim.BBAlbumArtCacher.plist
                 [loaded] com.rim.BBLaunchAgent.plist
                 [loaded] com.symantec.quickmenusa.application.plist
                 [loaded] com.symantec.savdiskmountnotify.application.plist
                 [loaded] com.symantec.scannotification.application.plist
                 [loaded] com.symantec.symsecondarylaunch.application.plist
             [not loaded] com.teamviewer.teamviewer.plist
             [not loaded] com.teamviewer.teamviewer_desktop.plist
                 [loaded] syncmateStarter.plist
User Launch Agents:
             [not loaded]          .DS_Store
                 [loaded] com.adobe.AAM.Updater-1.0.plist
                 [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                 [loaded] com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
                 [failed] com.akamai.client.plist
                 [loaded] com.akamai.single-user-client.plist
                 [loaded] com.facebook.videochat.taylorcashdan.plist
                 [loaded] com.spotify.webhelper.plist
                 [loaded] com.valvesoftware.steamclean.plist
User Login Items:
          ExpanDrive
          Google Drive
          AirServer
          Dropbox
          AdobeResourceSynchronizer
          Alfred
          SpeechSynthesisServer
          com.avatron.airconnect.service.airlogin
          Air Connect
          BlackBerry Device Manager
          Air Connect
3rd Party Preference Panes:
          AirServer Preferences
          Akamai NetSession Preferences
          Citrix ShareFile Sync
          Flash Player
          Flip4Mac WMV
          FUSE for OS X (OSXFUSE)
          Java
          MacFUSE (Tuxera)
          SymAutoProtect
          Symantec\nQuickMenu
Internet Plug-ins:
          AdobeAAMDetect.plugin
          AdobeExManDetect.plugin
          AdobePDFViewer.plugin
          AdobePDFViewerNPAPI.plugin
          CitrixICAClientPlugIn.plugin
          DirectorShockwave.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
          Unity Web Player.plugin
User Internet Plug-ins:
          Google Earth Web Plug-in.plugin
Bad Fonts:
          None
Top Processes by CPU:
              18%          WebProcess
               4%          mds
               2%          EtreCheck
               2%          WindowServer
               1%          coreservicesd
               0%          DashboardClient
               0%          BBLaunchAgent
               0%          SystemUIServer
               0%          Safari
               0%          fontd
Top Processes by Memory:
          898 MB          WebProcess
          270 MB          Safari
          213 MB          mds
          156 MB          Messages
          74 MB          Google
          66 MB          WindowServer
          49 MB          Finder
          49 MB          Dock
          49 MB          coreservicesd
          41 MB          com.apple.dock.extra

Similar Messages

I'm a little confused about the Adobe Site of the Day submission.

Can you only submit if built with Muse? Where can you submit an already built side with code?

The sites in the www.adobekb.com Site Of The Day gallery are Muse sites. Many contain HTML embed code for maps, Twitter feeds, forms, videos, analytics, etc., which can be simply copied/pasted into Muse Design view. Some contain animations created and placed/imported from Edge Animate or Flash Pro.
We do our best to screen the site of the day winners to exclude sites that were achieved by editing the HTML generated by Muse after export, since that workflow requires hand coding which is not what Muse is about. Sites that include copied/pasted embed code or small snippets of code inserted in the <head> section of Page Properties within Muse are fine.
A couple caveats
1) We recently removed one site that relied on hand editing after export from Muse, which either did not contain that code when the award was granted, or we missed it.
2) Authors of sites are likely to continue to evolve their designs after the award is granted, so the site linked to may no longer be the exact site/code that was awarded Site Of The Day honors.
If you encounter a site in the gallery and are puzzled by how it was created with Muse, ask about it here. I'm sure the community would be happy to respond and the discussion would be educational for all.

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this.

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this. Thank you.

The DVD recorder I'm referring to is one I've use for years. It is not attached to my aging iMac in any way. I simply play the video from my camcorder (mini-dv tape based Canon HV20) into the DVD recorder and create a DVD that can be played in any DVD player. I can only do minimum editing so what goes in is what I get. This has been fine for creating dupes of the various things I shoot.
If I buy a new iMac (21 inch), I'd like to be able to download the video to the iMac through iMovie, work with it to whatever degree I wish, and burn it to a DVD that can also be played in any DVD player -- or to use as a master to dupe copies.
What I'm understanding from you and others is that this would be possible if Apple had included iDVD in the software that comes with the iMac, or if I purchase the iLife Family Pack, or buy the correct version of Toast. I'm hoping I can persuade Apple to sell me an iMac with iDVD installed.
Essentially I want to move from a basic process of creating DVD copies to the more sophisticated process of creating one from an iMac.
Thank you again for your help and wisdom.

Confuse about the injecting entity in EJB 3.0?

Hi all,
I have an customersBean which is inherit from customersRemote and my problem is i' am little confuse about injecting the entity(customer).
Where can you apply the EntityManagerFactory is it outside on EJB or Inside the EJB? means outside EJB is use the web application or java application. i have and example.
this is inside on EJB...............
public class CustomersBean implements com.savingsaccount.session.CustomersRemote {
@PersistenceContext(unitName="SavingAccounts")
EntityManagerFactory emf;
EntityManager em;
/** Creates a new instance of CustomersBean */
public CustomersBean() {
public void create(int id, String name, String address, String telno, String mobileno)
try{
//This is the entity.
Customer _customer = new Customer();
_customer.setId(id);
_customer.setName(name.toString());
_customer.setAddress(address.toString());
_customer.setTelno(telno.toString());
_customer.setMobileno(mobileno.toString());
em = emf.createEntityManager();
em.persist(_customer);
emf.close();
}catch(Exception ex){
throw new EJBException(ex.toString());
in web application, i'm using the @EJB in customer servlets.
public class CustomerProcessServlet extends HttpServlet {
@EJB
private CustomersRemote customerBean;
blah blah inject directly coming request field from jsp.
}

Hi all,
I have an customersBean which is inherit from customersRemote and my problem is i' am little confuse about injecting the entity(customer).
Where can you apply the EntityManagerFactory is it outside on EJB or Inside the EJB? means outside EJB is use the web application or java application. i have and example.
this is inside on EJB...............
public class CustomersBean implements com.savingsaccount.session.CustomersRemote {
@PersistenceContext(unitName="SavingAccounts")
EntityManagerFactory emf;
EntityManager em;
/** Creates a new instance of CustomersBean */
public CustomersBean() {
public void create(int id, String name, String address, String telno, String mobileno)
try{
//This is the entity.
Customer _customer = new Customer();
_customer.setId(id);
_customer.setName(name.toString());
_customer.setAddress(address.toString());
_customer.setTelno(telno.toString());
_customer.setMobileno(mobileno.toString());
em = emf.createEntityManager();
em.persist(_customer);
emf.close();
}catch(Exception ex){
throw new EJBException(ex.toString());
in web application, i'm using the @EJB in customer servlets.
public class CustomerProcessServlet extends HttpServlet {
@EJB
private CustomersRemote customerBean;
blah blah inject directly coming request field from jsp.
}

Confused about the default schema

Hi,
I am a little bit confused about the schema concept.
I want to create a new schema called APP and then create several users and roles based on the schema APP. The default schema for the users should be APP achema.
How can I make the schema APP the default schema for the new users that I am creating?
I feel that there are some schema design concepts that I have to learn. Is there any resource on the internet that I can read and learn more about oracle schema design best practices?
Any help would be appreciated,
Ali

A schema holds object definitions, and in the case of table & index objects the schema also holds the data.
A user owns the schema.
Therefore the user 'owns the definitions (including any functions, procedures, sequences, tabels, etc.)
Other users may be granted access to some, or all, of the objects in a schema. This is done through the 'GRANT ...' command. For example, consider the following steps:
1) create user app_owner
2) create table object test owned by the app_owwner
3) create user app_user
4) grant select, update, insert and delete on app_owner's test table to app_user
5) add synonyms to avoid needing to qualify the table's schema name.
done as follows:
oracle@fuzzy:~> sqlplus system
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Apr 3 20:07:32 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Create the app owner userid. Note there is no need to ever log in to that user, even to create tables.
SQL> create user app_owner
2 identified by xyz
3 account lock
4 quota unlimited on users
5 default tablespace users
6 temporary tablespace temp;
User created.
Creating objects in a schema can be done by providing the schema name, or by switching schema in newer versions of Oracle
SQL> create table app_owner.test ( t number );
Table created.
Create a userid that will access the table. Set that userid up to access the database and (for future) give it the capability to create it's own synonyms
SQL> create user app_user
2 identified by xyz
3 temporary tablespace temp;
User created.
SQL> grant create session to app_user;
Grant succeeded.
SQL> grant create synonym to app_user;
Grant succeeded.
Now give the user access to the objects
SQL> grant select, update, insert, delete on app_owner.test to app_user;
Grant succeeded.
Let's test it out. Insert by qualifying the schema name on the object, then create a synonym to avoid using schema, and try it all using the synonym
SQL> connect app_user/xyz
Connected.
SQL> insert into app_owner.test values (4);
1 row created.
SQL> create synonym test for app_owner.test;
Synonym created.
SQL> insert into test values (3);
1 row created.
SQL> select * from test;
         T
         4
         3
SQL> Note that some people want to use PUBLIC grants and PUBLIC synonyms. This is a real bad idea if you want to ensure long term security of the data and want to host several different applications in the same Oracle instance.
This, and a whole lot more, is in the 'Concepts' manual for your version of the database at http://docs.oracle.com

I'm confused about the apple ID transition from my aol screen name. Does it continue to use my aol email as my apple ID, converting it somehow or do I need to provide a new email address or just create a new username for the apple ID?

I'm confused about the transition to an apple ID that doesn't use my aol email to sign in. The instructions are vague and ambiguous. Any help would be appreciated.

OK, so if your current Apple ID using your AOL Username (like johndoe), then you need to log onto Manage your Apple ID and EDIT that AOL Username to a valid email address: Apple - My Apple ID
If you have an AOL email address (like [email protected]), and you are not using that as another Apple ID, you can change the AOL Username Apple ID to that. Otherwise, you can change it to any valid email address (which you will have to verify when you change to it).
Hope that clears it up. Post back if it doesn't!
Cheers,
GB

Confuse about the document

Hi,all . From the document ,i had confused about the following .
Automatic Undo Management in Oracle RAC
url >> http://docs.oracle.com/cd/B19306_01/rac.102/b28759/adminrac.htm#CHDGAIFJ
Oracle automatically manages undo segments within a specific undo tablespace that is assigned to an instance. Only the instance assigned to the undo tablespace can modify the contents of that tablespace. However, each instance can read the undo data blocks created by any instance. Also, when performing transaction recovery, any instance can update any undo tablespace, as long as that undo tablespace is not currently being used by another instance for undo generation or transaction recovery
what's the meaning of above that is bold ?

Say you're running a 2-node RAC and node 2 dies. The services which were running on node 2 now get re-located to node 1. It is then possible that node 1 will perform transaction rollback/recovery and, when it does so, it will need to be able to read from node 2's undo tablespace (and maybe update the undo segment headers in node 2's undo tablespace, too).

Confused about the battery...

Hello everyone,
I'm from Pakistan and I just switched to Mac almost 2-3 weeks ago. Since, they have proper apple authorized dealers here so I finally decided to get one for myself. I had some confusion about the battery and my system and now I'm getting very much concerned and worried as a matter of fact.
I installed coconut battery (as few people suggested me) to check my battery status. First of all, it shows the age of my Mac as 5 months, which is pretty surprising since I got a brand new one and even the condition is of a brand new one so I have no clue why did it say that.
Secondly, I would like to tell the condition of my battery:
Current Battery Charge: 3591 mAh (I'm using on battery power right now)
Maximum Battery charge: 4068 mAh
88%
Current Battery Capacity: 4068 mAh
Original Battery Capacity: 4100 mAh
99%
Additional info:
Battery-Loadcycles : 12
Age of your Mac: 5 months
Charger connected: No
Battery is charging: No
I am just concerned that my battery current capacity decreased to 99% after just 12 load cycles. Why is that? Some people tell that they have a 100% even after using it for a long time and other than that does anyone have any idea why is the age being shown as 5 months when I have only used it for 2 weeks.
I'm really confused.
Another suggestion that I want is that in Pakistan, we are having major electricity load shedding so I can't keep it on AC power most of the time so if my computer is shut-down and being charged. If the electricity goes and when it comes back and it starts charging to the point from where it left, will that waste the load-cycle or will it continue to charge it from there without wasting cycle? Does that affect the battery life? (Assuming that the computer is shut-down while being charged)
Last thing, should I use it mostly on AC power or is it better to charge it and then drain the battery and then charge it and then use. Till how much percent should I keep using on the battery power and then connect the Magsafe connector?
Please help people
I'd highly appreciate if you could answer my questions.
Thank you.

I was told that it is best to keep it plugged in and connected to the charger when you can, but if you are not able to do that then just use battery power. I just know you don't want too many cycles, which means you don't want to drain the battery completely then fully recharge it. You should calibrate the battery, which is pretty much just draining battery then recharging it, every couple of months if you keep it plugged into the charger and don't use just the battery often.

Confused about the meaning of Time Quota Types

I am learning SAP-HCM on IDES 6.0. I am confused about the meaning of Time Quota Type. I have gone thru the SAP documentation, but still not clear about it. Please help me with a few examples. How is it different from Absence Type?

Hi Gopal ,
Absences are very generic ones that we create which needs to be reflected in IT2001 and dedcution can happen.
Absence Quotas are the limited entitlement that is fixed say ur eligible for 10 days sick leave so here this is a Quota for each year and so becomes a Quota say Sick leave Quota =10 and will be seen in IT2006.
Now an absence needs to be linked to this Quota for dedcution.
An absence can be or may not be linked to a Quota.This depends on business Requirement.
Let me know if u have further Questions.
Thanks
Swati

Confused about the 'cpu fsb clock frequency' setting, etc., in cell in bios

just got a new k8n neo2-f nforce3 board with an a64 3500+ venice chip. It is properly recognized in the bios and windows as an a64 3500+ at 2.2ghz, but I'm confused about the cell menu settings in the bios. I see a 'cpu fsb clock frequency' which was automatically set at 200mhz, but the fsb runs at 1Ghz (1000mhz), so what is the 'fsb clock frequency' if not equal to the cpu fsb? Is 200 the correct setting for that? Should I need to change any of the other settings in here? I wonder, because my 3dmark03 score only went up 200 points from the same system with a AthlonXP 2500+ chip and kt4avl mobo, which seems like a low increase to me.....

I would set that to Manual in BIOS, so that you can incremently increase the CPU speed without causing a sudden crash. Each system is different and operates within the specs of not only the CPU, but system memory and PCI-E add-ins as well. Your video card is the primary driver behgind your 3DMark scores...but you haven't listed that?!

Confused about the Business Component Developer Certification

Excuse me, I´m confused...
How many certifications are about the Business Component Certification? Three??
I thought there was just one, the Business Component Developer, which is the 1Z0-860 code...
but I also have seen these:
Java EE 6 Enterprise JavaBeans Developer Certified Expert Exam - 1Z0-895
Java EE 6 Java Persistence API Developer Certified Expert Exam - 1Z0-898
and now I don´t know which one to study for...
Are these better? Or just different? Or are the last ones just the new ones and the 1Z0-860 is obsolete?
Thanks in advance!

938334 wrote:
Excuse me, I´m confused...
How many certifications are about the Business Component Certification? Three??
I thought there was just one, the Business Component Developer, which is the 1Z0-860 code...
but I also have seen these:
Java EE 6 Enterprise JavaBeans Developer Certified Expert Exam - 1Z0-895
Java EE 6 Java Persistence API Developer Certified Expert Exam - 1Z0-898
and now I don´t know which one to study for...
Are these better? Or just different? Or are the last ones just the new ones and the 1Z0-860 is obsolete?
Thanks in advance!The basic answer to look at the question topics for each exam and and see what fits you. The question topcis should yield insight.
Additionally the following exam is an OCP
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=&lang=&p_exam_id=1Z0_860
The other two are OCE, as far as I can tell. Typically more of an area in depth, but OCE's can vary.
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=&lang=&p_exam_id=1Z0_895
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=&lang=&p_exam_id=1Z0_898
I also notice the earlier exam is J2EE5; the later exams are J2EE6
Hope this helps a little, but this java stuff is too hard for me and i must stackdump.

Confused about the "To" box in email ap

I keep seeing this little gray square that has the letters "To" inside it every time I scroll through my e-mails. What exactly does this mean? I'm rather confused. I also noticed that sometimes when I tap on e-mails, I get a list of two messages for some reason. What is going on?

Thank you, but what about the multiple e-mails I'm pulling up upon tapping on one e-mail? The mail app seems to thing that I want to see related e-mail; is this what it's doing?

So confused about the size.... how exactly should i set them?

i've written codes like:
JFrame fr = new JFrame ("FR");
JTabbedPane tp = new JTabbedPane();
JPanel pa = new JPanel();
JTextArea ta = new JTextArea;
fr.add(tp.add(pa.add(ta)));
Questions:
1. How do I set the SIZE (dimension) of the GUI (the whole thing)
2. How do I set the size of the TextArea
I was thinking:
setSize = set the default size of a panel/compent
setMaximumSize = set the maxium area of that panel/compent (that'll allow you to drag to )
setMinimumSzie = set the smallest window/pan/comp that you can drag to
i tried fr.setSize or whatever... nothing just work.....!!
Sorry... im really a beginner and i don't know where can I have a good read about all these Java.awt objects... JPanel/Frame/tabbedPanel/TextArea/button/watever.... sooo many and so easy to be confused....
sorry i about the poor english... hope someone can help me out....
thanks!

Some helpful resources in the tutorial:
Trail: Creating a GUI with JFC/Swing
1 - Lesson: Using Swing Components
a) - A Visual Index to the Swing Components
b) - Using Top-Level Containers
2 - Lesson: Laying Out Components Within a Container
For the JFrame or other top-level container we use the "setSize" method.
For JTextArea the api recommends we set the rows and columns to provide size information for the parent layout manager. For example - "new JTextArea(6, 18)"
Some layout managers, such as FlowLayout and GridBagLayout will use the preferredSize for sizing components so you can use the "setPreferredSize" method (in Swing and in j2se 1.5+ AWT).

Confused about the role of ejbc in Weblogic 7

Howdy All
Here is my understanding of the role of ejbc in Weblogic 7:
* Let's assume I have a JAR containing an EJB (let's say a stateless session bean).
Let's call this the no-ejbc-JAR.
1. I run the no-ejbc-JAR through ejbc to create the container-ejbc-JAR which can
now be deployed in Weblogic.
2. I can run ejbc against the no-ejbc-JAR to create a client-ejbc-JAR for use
by clients wishing to access and use the EJB.
Questions...
MUST I run the no-ejbc-JAR through ejbc (to create the container-ejbc-JAR) before
it can be deployed in Weblogic 7?
If so, why?
I can sort of see why this may be necessary from the containers perspective, although
I would have thought the ejbc process could have been automatically applied by
Weblogic to no-ejbc-JARs being deployed.
But I am confused as to why ejbc would need to be used to create a client-ejbc-JAR.
From the client's perspective, isn't it simply enough to have the no-ejbc-JAR
(or a subset of the no-ejb-JAR) containing the EJB home and remote interfaces
(along with any non-ejbc generated support classes)? For use by the client, why
would it be necessary to run the no-ejbc-JAR through ejbc to create a client-ejbc-JAR?
Or do I have an incorrect understanding of the role of ejbc?
Thanks,
Rob

Hello Rob,
I will try to clarify a couple of your concerns. First of all, if your EJB jar
contains CMP 2.0 entity beans, the underlying JDBC implementations must be generated
for your respective abstract classes of the entity beans. EJBC will generate this
for you automatically. Also, the EJBC utility generates all of the other necessary
server classes that WebLogic requires for deploying your EJBs (such as custom
code for handling transactions, security, and other EJB services). When your EJB
utilizes remote home/component interfaces, the utility will also generate all
of the necessary client-side proxy and server-side byte code by running the RMI
compiler on your EJBs. In addition to the above code generation that takes place,
EJBC also checks all of your EJBs and makes sure that they are written according
to the EJB specification. This way you will always be sure that your EJBs will
be deployable on BEA WebLogic if EJBC returns with no error messages. You also
asked if EJBC must be run manually before deploying the EJBs. If you run your
application in exploded directory format, WebLogic will automatically invoke the
EJBC utility prior to deploying your EJBs. Please refer to the links below for
more information about the EJBC utility as well as deploying your application
in exploded directory format:
http://edocs.bea.com/wls/docs70/ejb/EJB_utilities.html#1075296
http://edocs.bea.com/wls/docs70/programming/deploying.html#1125152
Also, feel free to examine the code that EJBC generates to gain a better feel
for what's happening behind the scenes. Also, please be aware that ejbc has been
deprecated in WebLogic 8.1, in favor of the appc utility:
http://edocs.bea.com/wls/docs81/ejb/EJB_tools.html#1096936
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
"Rob Young" <[email protected]> wrote:
>
Howdy All
Here is my understanding of the role of ejbc in Weblogic 7:
* Let's assume I have a JAR containing an EJB (let's say a stateless
session bean).
Let's call this the no-ejbc-JAR.
1. I run the no-ejbc-JAR through ejbc to create the container-ejbc-JAR
which can
now be deployed in Weblogic.
2. I can run ejbc against the no-ejbc-JAR to create a client-ejbc-JAR
for use
by clients wishing to access and use the EJB.
Questions...
MUST I run the no-ejbc-JAR through ejbc (to create the container-ejbc-JAR)
before
it can be deployed in Weblogic 7?
If so, why?
I can sort of see why this may be necessary from the containers perspective,
although
I would have thought the ejbc process could have been automatically applied
by
Weblogic to no-ejbc-JARs being deployed.
But I am confused as to why ejbc would need to be used to create a client-ejbc-JAR.
From the client's perspective, isn't it simply enough to have the no-ejbc-JAR
(or a subset of the no-ejb-JAR) containing the EJB home and remote interfaces
(along with any non-ejbc generated support classes)? For use by the client,
why
would it be necessary to run the no-ejbc-JAR through ejbc to create a
client-ejbc-JAR?
Or do I have an incorrect understanding of the role of ejbc?
Thanks,
Rob

Confused about the new Creative Cloud

Dear all,
Since I read adout the new Creative Cloud I am confused about what is going to happen to my license for Adobe Lightroom. Are they going to still maintain the desktop applications as well or will I have to pay for a yearly license if I want to use the new versions of Lightroom?
I am a casual photographer and I love using Lighroom for my pictures but I don't think that paying for a yearly license because I am not spending a lot of time editing pictures.
Can someone clarify this for me?
Many thanks,
Lucian

DrLucian wrote:
I am a casual photographer and I love using Lighroom for my pictures but I don't think that paying for a yearly license because I am not spending a lot of time editing pictures.
The CC is geared towards Pro users, schools etc. LR spans both Pro and casual users. So from what I can garner Lightroom will stay as it is for the next iteration at least. I quoted that bit as my opinion is that that is the very reason why Lightroom will be available outside the cloud with a cloud version available with intergration features with the rest of the CC suite.

I'm a little confused about the vents...

Similar Messages

Maybe you are looking for