I'm a new user and learning, I bought and installed Premiere Pro cs6. I got a nice video clip but has a baby cried in the background and very annoying. My question is, is this noise remover is separate from the cs6 or I need to get this software downloa
I'm a new user and learning, I bought and installed Premiere Pro cs6. I got a nice video clip but has a baby cried in the background and very annoying. I have tried all of the sounds in Prem cs6 but didn't work. My question is, do I need to get a separate sound software download and install to be able to use it?
In the CS versions, there was some audio capability in PrPro but you needed to get a separate audio program for major work. Lessening a baby definitely qualifies as major work. That's lessening, i dont mean eliminating. Adobe's audio program is Audition. There are others "out there'. In the CC versions one just downloads Audution also.
Neil
Similar Messages
-
I have the Creative suite 6 premium teacher edition installed on a mac and I want to install Premiere Pro and Photoshop ONLY on a separate macbook. How do i do this?
Get the CS6 installation file and when you run it on the separate machine choose to install only the programs you wish it to have.
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html -
i am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use.
Singenu wrote:
I tought about looking in Monitor Activity to see what happens...
Well, when I start working (should I say try to work with FCPX, activity monitor in the %processor column for FCPX jumps rapidly over 100% and reaches more than 200% ??? What the **** is that ?
200% or more is not strange. Remember that your mac has 4 cores (you say it's 3 months old, so I assume it is a new model), so 200% amounts to using 2 of these 4 cores to the max.
Regarding the question of creating a new admin user: while it sits in the same system, it may help if the problem is caused by some user-specific preferences or settings. Not likely in your case, since you seem to have reinstalled from scratch, but still it is worth a try. It takes 5 minutes and may help pinpoint the problem. -
I need to know which update(s) I can apply to help stabalize the system.
Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here. -
I have a macbook pro 15 retina - when ever I connect to bluetooth speaker, I get this loud noise coming from the speaker - if I turn bluetooth off, the noise is now coming from the macbook speakers & stays until i restart.
Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
- ICA Driver V4.0.0
- Canon IJ Network Tool V4.5.0
I'm not sure if these are the correct / complete drivers I need for this install or not.
I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
So, at this point I am stuck??
Thanks
Stephen -
console blinking amber and white alternatively. displaying the Apple TV console with a question mark on top of it. What is the problem and pls how can it be solved ?
That's hard to say.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery. -
Iphone 5 poor battery since iOS 8 updated Apple need to get this sorted as if ur on Internet on fone for 20 mins or so battery goes down very quickly and no it's not my battery I have 3 iphone 5 doing same Apple take note there's millions of people that need there done not to fully charge it then it goes flat within a hour and thats with a new battery fitted aswell
brianbrew wrote:
Apple take note there's millions of people that need there done not to fully charge it then it goes flat within a hour and thats with a new battery fitted aswell
Take note that in the TOS that you agreed to when you joined the community that this is a user to user forum, and Apple does not participate. If you want Apple to take note of something, then you need to use the feedback page HERE, and click on the appropriate link. -
My son and I both have iphones with the same Apple ID. Since I installed iOS this morning I have started receiving all my sons texts and when I send him a text it is delivered to both of us. How can I remove my phone from the joint Apple ID and remove myself from finding out what he is up to during Freshers week!
You have to use a different Apple ID for your son.
Read this note:
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family
still valid for ios 7 -
I would like to have an email account that is password-protected that I can access on my Mac, Iphone and Ipad, separate from the Mail application, with an alert button that indicates unread messages
Try a search... I'm sure if you put forth a little effort you can find a solution that will work for you.
-
I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fixed.
run the cleaner (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then retry installing.
-
After copying a movie to the harddisk of my MacBook I wanted to also copy it to my iPad, but for this you first have to copy it to the library in iTunes, but this doesn't seem to be working. So how can I get this movie to the library ? And to the iPad ?
How is it not working? And how are you doing it? Drag the movie onto the iTunes icon on the Dock... what happens?
-
I’m going to get the I Mac and since the new I Mac doesn’t have DVD drive on it I was thinking to get the Samsung SE-506AB Slim Portable Blu-ray Writer in order to burn movies from I movie do I need a special software for that since the SE-506ab comes only with windows software.. but I did check and it is compatible with apple. Can you please advise me and or let me know if I’m buying the right stuff or if there is any other blu ray that will work with the I mac as plug and play.
Thank you
HaimThis freezing reminds me of really old Macs, long ago, in the days of the old-school peripherals like SCSI drives, terminators, scanners and the like. If you had a SCSI conflict, like the wrong device ID's or something, you'd freeze up like that. Back in those days you'd call 800-SOS-APPLE (AAPL?) and they'd run you through disconnecting all your extra hardware - Jaz and Zip drives, CD burners, scanners etc and then eliminate them one by one by adding them incrementally and testing for the freeze/bomb dialog.
But, today we have Firewire and none of those ancient issues (no free lifetime tech support either). My iMac's ports are all full, and I only know which devices are connected when I have to remove something for another device. iSight, scanner, card reader, external hard drive, USB soundsticks, etc. You wouldn't happen to have any SCSI devices hooked up, would you?
Out of curiosity, have you tried a different USB/Firewire port for the hard drive? Or run the hardware test DVD that comes with your computer? This weird freezing seems to suggest a problem with the computer, RAM or network more than a device. Bad devices, in my experience, cause kernel panics, not freezing. -
Just upgraded IOS to V7 and iphone is asking for a password and the online password will not work. I really need to get this sorted as I am away and need to get the phone working.
Pablos1966 wrote:
Surely the current ID and Password would work . Anyway I will see how I get on with the Device Password.
No. If you failed to turn off Find my iPhone BEFORE you upgraded to iOS 7, you will need the original Apple ID and password. If you upgraded to iOS 7 you will need this info; there is no way around this. If it is the device passcode you will need to restore your iPhone in order to reset that, which in the end will require your Apple ID and password in order to activate the phone once it is restored.
Why don't you have the original Apple ID? Where did you get the phone? -
I'm trying to install Premiere Pro CC 2014 and it keeps failing. I'm at this all day!
I've been trying to install Premiere Pro CC 2014 all day. It will begin the installation then progress. Suddenly it will decrease the %complete. Once it went all the way to 84% then failed. Can anyone tell me why this has happened. I have never had any trouble installing any other apps from my CC Membership.
Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
On my mac, photoshop cc "save as" removes capture date from exif data. How do I prevent this?
On my mac, photoshop cc "save as" removes capture date from exif data. How do I prevent this?
You had to reinstall CS6 after cancelling the CC as both were from the same Adobe ID. You can always use & keep both CC & CS6 together.
Please refer to the blog:
Can I install both CS6 and CC apps on my computer? « Caveat Lector
Other references are :
Creative Cloud Help | Install, update, or uninstall apps
What is the difference CS6 & CC Versions?
Regards
Rajshree
Maybe you are looking for
-
How to render multiple lines of text?
Hi, I have a string variable in a backing bean,which holds multiple lines of text with newline character as the seperator. I have to display it in my jspx page. Which component is suggestable? Thanks, Lokesh.
-
Hi,, I want to send an idoc to a partner with the (for example) BD10 transaction. I also want to make sure all "required fields" are filled So in my outbound user-exit I have this code: if l_ze1marcm-zcomcode is INITIAL. message e008(zmdm) with '(ZE1
-
someone plzz help me i m so confused!!!
-
hi can u pls help me with this issue In sales order there is a ship to sold to party entered manually by the sales order clerk, however this is not reflected in the PICKING SLIP OR PICK LIST. The customer WANTS the ship to party to be printed out in
-
Installing AS and Database on one machine
Hi all I want to install Oracle Database 10.2.0.3 and Oracle AS 10.1.2.0.2 (Business Intelligence and Forms Developer Topology) on one linux machine (AS 4). I can install the database and the AS as suggested in the installation guides. But now my mac