I'm about to lose it! SB Live! and KT7Pro2 follies.

I'm past the point of frustrated. I just bought a K7TPro2 (6330) to replace my original K7T that died on me. I have a SoundBlaster Live! Platinum (CT-4760) that worked just fine with that system that I am now trying to install in the Pro2. I've logged about 8 hours in that endeavor to date. Here's the skinny of it (I'll try to be brief).
Windows XP fully recognizes the Live! card and gives every indication that it is in place and working; minus the sound. I do want to keep the Live! card as it has some nice features for musicians who use Cakewalk; more specifically SoundFonts (please tell me if the AC97 can do the same). The connectors on the front are very nice too.
- I checked all of the connections, wiring, etc. threefold
- with the new motherboard, I did buy a new case with a 400W Power Supply, running Athlon 1.1Ghz, 356Meg PC100 RAM
- I flashed the 6330 bios with the latest, 3.6 I think
- I installed the Via 4 in 1 patch, multiple, multiple times
- I downloaded the latest and greatest Live! drivers and installed, deleted, and reinstalled many, many times
- I even went throught the registry deleting references to the Live! before reinstalling
- I've tried the above with the onboard sound bios settings both enabled and disabled (onboard sound, modem, legacy audio settings)
- I've tried the above with Windows enabling/disabling the onboard AC97 sound
- I manually set IRQ 5 to legacy audio, the Live! card shows up on IRQ5, no conflicts there
- I switched PCI slots
- I threw the computer out the window (in my dreams)
I think that's the skinny of it. Please, can anybody help? I'm not completely opposed to buying a new card if it works well with SoundFonts, Cakewalk, and has an excellect sound/noise ratio. (and costs less than $150)

Please listen to what goofball2k said you really should try it in another machine first as if it's not the sound card that $400 wasted.
Also have you taken out the sound card and enabled the onboard sound yet? Try it and see if you can get the AC'97 working.
Cheers
Michael

Similar Messages

Could anyone tell me if a ipod touch is intrinsically safe ?? i am about to lose my job over it .....

Please could someone tell me if a ipod touch is intrinsically safe ? . I work in oil terminal and about to lose my job over having one .

What context are you using 'intrinsically safe' in
Safe from generating stray sparks and igniting the terminal?
Safe from being used as a storage device for company data?
How do you want it to be safe?
PS:
Are you 'markfrommiddlesbrough'

About:lose i phone 5 and how to locate it.already use find my i phone but always off that phone..how do i locate it?

i lose i phone 5 and how to locate it.already use find my i phone but always off that phone..how do i locate it?or got another way to locate it...hope u can help
me solve this problem...

If the iPhone has been taken offline by power-off, disabling 3G/4G and WiFi or erasing data & settings, It can no longer be located by you.

Will I lose my email folders and contacts addresse...

Will I lose my email folders and contacts addresses ???
Just this week changed from Talk Talk /toucansurf to a BT broadband and phone service.
I can access my emails ie receive and send from my new BT yahoo account and have good connection to the internet
BUT
Before I totally cancel my Talk Talk account I need to know whether the
1)existing emails in my inbox
2) the emails that are stored in folders I have created
3) and my contacts address book
will disappear when I make the full switch ????
Thanks
Sorry, think I posted this in another area too as was unsure)
(once this question is answered I need to ask another but this one is more important - cheers)
Solved!
Go to Solution.

You should be able to export your contacts to a file, then import them to your BT account. As for folders, if they are stored within the Windows Live program, they you should be able to save the contents.
If they are stored on a remote server, and you access them by webmail, then you may lose them unless you use an IMAP account to duplicate the folders on your computer, where you can save the contents.
Really this is an issue you need to ask about here http://www.talktalkmembers.com/forums/
as they are more likely to know how their email servers work.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

How to create Live and Archive Streaming URLs??

Hello Pros,
I am new to QT Streaming Server, and how it is setup and delivered. Please take it easy on me. Here are my questions.
Our school has been using Helix (Real) Server to deliver some video content via Live/Archive streaming video. The school will be changing a format to QuickTime Streaming server to move away from Real. We would like to deliver MPEG4 file via Live Streaming and archive. We set up QT Streaming Server and we can deliver video now.
How do you create and display URLs on a webpage to share live and archive movies? In RealServer, you can list URLs with live and archive, and RealPlayer opens separately and play movie. The videos are lectures so the website will have list of lecture links as we record every week.
If I click this link, a RealPlayer opens and start playing. Currently, I know that “sdp” file is assigned under RealPlayer. When I changed it to QuickTime Player, the player does not open to play movie. Is there way for me to setup URL to open it in external player? We are not interested in making the movie playable inside webpage. We would like to let viewers have option to stretch the movie player to view larger image if they wish. Strange thing is that when the live movie is played in RealPlayer, the image size is smaller that what we stream (320x240). How is it possible? I am confused…
How about archived streaming URLs? I have seen sites with embedded movie in the webpage, but how do you make links that when a viewer click the URL, it will start QuickTime Player externally instead of open it in new webpage? Is this possible? In RealServer, you can use “ramgen” code in a part of URL to open RealPlayer to play a movie.
Any help will be appreciated it.
Thank you.
Reed
G5, PB 17, Xserver, XSAN Mac OS X (10.4.7)
G5, PB 17, XServe, XSAN Mac OS X (10.4.7)

The Photoshop Forums (mac & PC) can be found here:
Photoshop Windows
Photoshop Macintosh

Hello. I keep my IPhoto library (about 90GB) on an external HD and am trying to back it up to another external drive. Both are formatted Mac OS Extended (Case-sensitive, Journaled). Recently, backup has failed from the start due to error 36. Howtoresolve?

Hello. I keep my iPhoto library (about 90GB) on an external HD and am trying to back it up to another external drive. Both are formatted Mac OS Extended (Case-sensitive, Journaled) and both check out when scanned with Disk Utility. Recently, backup has failed from the start due to error 36. Any ideas how to resolve? Also, what's the maximum recommended size for an iPhoto library file? Thx!

Since you can't drag the library to the other EHD for the backup see if you can duplicate it (if you have enough room on the drive) by selecting it and typing Command+d (duplicate).
If you do rebuild the library without a backup and it goes awry you won't lose your photos but you may lose your orgnaizational efforts. So try the following:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library in the location of your choosing based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
NOTE: Fix 2 above might be the method you might want to try first with iPLM creating the new library on your second EHD. If it works that would get your backup copy on the second EHD at the same time as repairing it. If it does'nt work then go back to Fix 1.
OT

I have never connected by iphone5 to my computer because the computer was broken. Now its fixed. Will I lose all the photos and texts on my iphone5 if I restore from last backup of my old 4s?

I have never connected my iphone5 to my computer because the computer was broken. Now that it is fixed, I want to know if I will lose all my photos and texts on the 5 if I restore from last backup of my 4s?

If you restore to an older backup, you will get the content that is in the backup. Everything on the iPhone will be erased and you will be brought back to the time that backup was made. See this document prepared by another user about syncing to a new computer https://discussions.apple.com/docs/DOC-3141

Any comments about this code regaarding naming conventions and flow and e

CREATE OR REPLACE PACKAGE SEODS02.ODS_APPEND_REPLACE
AS
/* Description : This procedure will start the process step for moving
data from staging to live table for Append and Replace paradigms
/**************** Change History ***********************************/
/* Date Version Author Description */
-- Global Specifications.
package_name_in VARCHAR2(50) :='ODS_APPEND_REPLACE';
v_location INTEGER := 10;
v_cntl_schema VARCHAR2(20):= 'SCNTL02';
-- Procedure Specifications.
PROCEDURE APPEND_REPLACE_INSERT (job_name_in IN VARCHAR2,
schema_name_in IN VARCHAR2,
proc_cd_in IN VARCHAR2,
proc_step_cd_in IN VARCHAR2,
bch_dte_in IN DATE,
fl_nbr_in IN VARCHAR2,
verbose_log_flag_in IN INTEGER,
pred_check_req_in IN INTEGER,
error_code_1_in IN VARCHAR2,
ibd_id_in IN INTEGER,
proc_step_status_out OUT INTEGER,
sp_hier_inout IN OUT VARCHAR2);
PROCEDURE APPEND_EXPOSE (job_name_in IN VARCHAR2,
schema_name_in IN VARCHAR2,
proc_cd_in IN VARCHAR2,
proc_step_cd_in IN VARCHAR2,
bch_dte_in IN DATE,
data_grp_cde_in IN VARCHAR2,
verbose_log_flag_in IN INTEGER,
pred_check_req_in IN INTEGER,
ibd_id_in IN INTEGER,
proc_step_status_out OUT INTEGER,
sp_hier_inout IN OUT VARCHAR2);
END ODS_APPEND_REPLACE;
CREATE OR REPLACE
PACKAGE BODY SEODS02.ODS_APPEND_REPLACE
AS
PROCEDURE APPEND_REPLACE_INSERT (job_name_in IN VARCHAR2,
schema_name_in IN VARCHAR2,
proc_cd_in IN VARCHAR2,
proc_step_cd_in IN VARCHAR2,
bch_dte_in IN DATE,
fl_nbr_in IN VARCHAR2,
verbose_log_flag_in IN INTEGER,
pred_check_req_in IN INTEGER,
error_code_1_in IN VARCHAR2,
ibd_id_in IN INTEGER,
proc_step_status_out OUT INTEGER,
sp_hier_inout IN OUT VARCHAR2)
AS
/* Local Variables Declaration*/
v_curr_date DATE := CURRENT_DATE;
v_procedure_name VARCHAR2(100):= 'APPEND_REPLACE_INSERT';
v_stg_tbl VARCHAR2(100);
v_act_tbl VARCHAR2(100);
v_whr_clause_out VARCHAR2(1000);
option_in VARCHAR2(30);
v_common_col_list VARCHAR2(10000);
v_stg_col_list VARCHAR2(10000);
v_act_col_list VARCHAR2(10000);
v_query VARCHAR2(10000);
v_thrshld_query VARCHAR2(10000);
v_actl_inpt_query VARCHAR2(10000);
v_proc_step_stat_query VARCHAR2(10000);
v_error_msg_in VARCHAR2(10000);
v_part_val_out INTEGER;
v_row_cnt NUMBER(10);
v_cmit_nbr NUMBER(10);
v_actl_inpt_cnt NUMBER(10);
v_rec_inserted_cnt NUMBER(10);
v_rec_errored_cnt NUMBER(10);
v_thrshld_nbr NUMBER(10);
v_data_grp_query VARCHAR2(10000);
v_data_grp_cde VARCHAR2(30);
v_proc_step_upd_out NUMBER(1);
proc_step_start_out NUMBER(1);
proc_step_status VARCHAR2(30);
handled_exception EXCEPTION;
BEGIN
/* Enable the logging if verbose log flag is 0*/
IF verbose_log_flag_in = 0 THEN
DBMS_OUTPUT.ENABLE();
ELSE
DBMS_OUTPUT.DISABLE();
END IF;
/* Start the Append/Replace Update process step after all the predecessor process steps are complete */
ODS_CONTROL_UTILITY.PROC_STEP_START( proc_cd_in => proc_cd_in,
proc_step_cd_in => proc_step_cd_in,
ibd_id_in => ibd_id_in,
bch_dte_in => bch_dte_in,
job_name_in => job_name_in,
verbose_log_flag_in => verbose_log_flag_in,
pred_chk_reqd_in => pred_check_req_in,
proc_step_stat_out => proc_step_start_out,
sp_hier_inout => sp_hier_inout);
IF proc_step_start_out = 0 THEN
dbms_output.put_line('Process Step '|| proc_step_cd_in ||' started for Process '||proc_cd_in);
/*If process step is successfully started then get the active and stage table names */
ODS_CONTROL_UTILITY.GET_TABLE_NAME( proc_cd_in => proc_cd_in,
proc_step_in => proc_step_cd_in,
ibd_id_in => ibd_id_in,
actv_tbl_out => v_act_tbl,
stg_tbl_out => v_stg_tbl,
sp_hier_inout => sp_hier_inout);
IF v_act_tbl IS NULL THEN
v_error_msg_in := 'Active table name is null. Please check the parameters passed';
option_in := 'others';
RAISE handled_exception;
/* If Active table is not null then get the active partition of the table*/
ELSE
dbms_output.put_line('Active table name is : '||v_act_tbl);
v_data_grp_query := 'SELECT data_grp_cde
FROM '||v_cntl_schema ||'.proc
WHERE proc_id = '||chr(39)||proc_cd_in ||chr(39)||
' AND ibd_id = '||ibd_id_in;
EXECUTE IMMEDIATE v_data_grp_query INTO v_data_grp_cde;
ODS_CONTROL_UTILITY.GET_ACT_PART(tbl_name_in => v_act_tbl,
data_grp_cde_in => v_data_grp_cde,
meta_data_in => 'VIEW DYN METADATA',
part_val_out => v_part_val_out,
sp_hier_inout => sp_hier_inout);
IF v_part_val_out IS NULL THEN
v_error_msg_in := 'Incorrect table name ' || v_act_tbl;
option_in := 'others';
v_location := 20;
RAISE handled_exception;
END IF;
dbms_output.put_line('Active partition for the table '|| v_act_tbl ||' is : '||v_part_val_out);
/*Get the list of active table columns*/
ODS_APPLICATION_UTILITY.GET_TAB_COLS (schema_name_in => schema_name_in,
table_name_in => v_act_tbl,
col_name_out => v_act_col_list,
sp_hier_inout => sp_hier_inout);
v_act_col_list := SUBSTR(v_act_col_list,1,LENGTH(v_act_col_list)-1);
IF v_act_col_list IS NULL THEN
v_error_msg_in := 'Failed fetching columns for ' || v_act_tbl || '. Check for the columns in table name';
option_in := 'others';
v_location := 30;
RAISE handled_exception;
/*Get the list of active table columns and concatenate the columns with 'stg_array(i)' */
ELSE
dbms_output.put_line('Active Table Columns List: '||v_act_col_list);
ODS_APPLICATION_UTILITY.GET_TAB_COLS (schema_name_in => schema_name_in,
table_name_in => v_act_tbl,
identifier_name_in => 'stg_array(i)',
col_name_out => v_common_col_list,
sp_hier_inout => sp_hier_inout);
v_common_col_list := SUBSTR(v_common_col_list,1,LENGTH(v_common_col_list)-1);
IF v_common_col_list IS NULL THEN
v_error_msg_in := 'Failed fetching columns for ' || v_act_tbl || ' and get concatenated with ' || 'STTG_ARRAY' ||'. Check for the columns in table name';
option_in := 'others';
v_location := 40;
RAISE handled_exception;
ELSE
ODS_APPLICATION_UTILITY.GET_TAB_COLS (schema_name_in => schema_name_in,
table_name_in => v_stg_tbl,
col_name_out => v_stg_col_list,
sp_hier_inout => sp_hier_inout);
v_stg_col_list := SUBSTR(v_stg_col_list,1,LENGTH(v_stg_col_list)-1);
IF v_stg_col_list IS NULL THEN
v_error_msg_in := 'Failed fetching columns for ' || v_stg_tbl || '. Check for the columns in table name';
option_in := 'others';
v_location := 50;
RAISE handled_exception;
ELSE
/* Form the WHERE clause on the primary key columns to update the proc_flag
column of appropriate record in stage table */
ODS_APPLICATION_UTILITY.GET_WHERE_CLAUSE( schema_nme_in => schema_name_in,
tbl_nme_in => v_stg_tbl,
trg_id => 'stg_array(i)',
whr_clause_out => v_whr_clause_out,
sp_hier_inout => sp_hier_inout);
IF v_whr_clause_out IS NULL THEN
v_error_msg_in := 'No columns fetched for ' || v_stg_tbl || '. Check for the columns in table name';
option_in := 'others';
v_location := 60;
RAISE handled_exception;
ELSE
dbms_output.put_line('Where Clause is : ' || v_whr_clause_out );
v_thrshld_query := 'SELECT proc_step_thrshld_nbr FROM '|| v_cntl_schema ||'.proc_step
WHERE proc_id = '|| chr(39) ||proc_cd_in|| chr(39) ||
' AND proc_step_cde = '|| chr(39) ||proc_step_cd_in|| chr(39) ||
' AND ibd_id = ' || ibd_id_in;
EXECUTE IMMEDIATE v_thrshld_query INTO v_thrshld_nbr;
dbms_output.put_line('Threshold number for the process step '||proc_step_cd_in||' is '||v_thrshld_nbr||' for the process '||proc_cd_in);
END IF;
END IF;
END IF;
END IF;
END IF;
v_query := 'SELECT proc_cmit_nbr FROM '||v_cntl_schema||'.proc
WHERE proc_id = '|| chr(39) || proc_cd_in || chr(39) ||
' AND ibd_id = '|| ibd_id_in;
EXECUTE IMMEDIATE v_query INTO v_cmit_nbr;
IF v_part_val_out = 999 THEN
/* Execute the dynamic pl/sql block to append the data to the active table*/
dbms_output.put_line('Executing Dynamic Insert Block for Append Paradigm');
dbms_output.put_line('--------------------------------------------------');
v_location := 80;
EXECUTE IMMEDIATE q'{
DECLARE
v_rec_inserted_cnt_in NUMBER(10):=0;
error_msg_in VARCHAR2(1000);
v_dyn_proc_step_upd_out NUMBER(1);
v_rec_updt_cnt_in NUMBER(10):=0;
v_actl_inpt_cnt NUMBER(10):=0;
v_rec_errored_cnt_in NUMBER(10):=0;
v_dyn_option_in VARCHAR2(30);
v_dyn_sp_hier VARCHAR2(30);
v_dyn_handled_exception EXCEPTION;
v_dyn_verbose_flag NUMBER(1):=0;
CURSOR c IS
SELECT }' || v_stg_col_list ||
' FROM ' || v_stg_tbl ||
' WHERE fl_nbr = ' || fl_nbr_in ||
' AND proc_flag = ' || chr(39) || 'N' || chr(39) ||
' AND to_date(bch_dte,'||CHR(39)||'DD-MON-YY'||CHR(39)||') <= '||CHR(39)|| bch_dte_in || CHR(39)||q'{;
TYPE array IS TABLE OF c%ROWTYPE;
stg_array array;
BEGIN
/* Enable the logging if verbose log flag is 0*/
IF v_dyn_verbose_flag = }' || verbose_log_flag_in || q'{ THEN
DBMS_OUTPUT.ENABLE();
END IF;
OPEN c;
LOOP
FETCH c BULK COLLECT INTO stg_array LIMIT }'|| v_cmit_nbr ||q'{;
FOR i IN 1..stg_array.COUNT LOOP
BEGIN
INSERT INTO }' || schema_name_in || q'{.}'|| v_act_tbl || q'{( }'|| v_act_col_list ||q'{,crte_pgm, updt_pgm, crte_tstp, updt_tstp, expsd_rec_ind) VALUES }' || q'{ ( }' || v_common_col_list || q'{,'}' || job_name_in || q'{','}' || job_name_in ||q'{','}' || v_curr_date ||q'{','}' || v_curr_date||q'{','N' );}' ||
q'{
v_rec_inserted_cnt_in := v_rec_inserted_cnt_in + 1 ;
v_actl_inpt_cnt := v_actl_inpt_cnt + 1 ;
error_msg_in := 'Error in updating PROC_STAT as inserted';
UPDATE }' || schema_name_in || q'{.}' || v_stg_tbl || q'{
SET proc_flag = 'I' ,
updt_pgm = '}' || job_name_in || q'{',
updt_tstp = '}' || v_curr_date || q'{'
WHERE }'|| v_whr_clause_out ||q'{;
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
error_msg_in := 'Record duplicated';
v_actl_inpt_cnt := v_actl_inpt_cnt + 1 ;
v_rec_errored_cnt_in := v_rec_errored_cnt_in + 1;
IF v_rec_errored_cnt_in >}' || v_thrshld_nbr || q'{ THEN
error_msg_in := 'Threshold limit }' || v_thrshld_nbr || q'{ Reached';
v_dyn_option_in := 'proc_step';
RAISE v_dyn_handled_exception;
ELSE
error_msg_in := 'Error in updating PROC_STAT as error';
UPDATE }' || schema_name_in || q'{.}' || v_stg_tbl || q'{
SET proc_flag = 'E',
-- err_code = }' || error_code_1_in || q'{, --need to uncomment once the err_code column is created in stage table
updt_pgm = '}' || job_name_in || q'{',
updt_tstp = '}' || v_curr_date || q'{'
WHERE }'|| v_whr_clause_out ||q'{;
END IF;
END;
END LOOP;
EXIT WHEN c%NOTFOUND;
END LOOP;
CLOSE c;
ND ODS_APPEND_REPLACE;
/

DUPLICATE
Any suggestions about this program to improve performance and effective cod

Windows live and yahoo messengers not working

Hi,
I have a blackberry 8520 using V5 OS and downloaded the latest service books as well as the latest version of windows live and yahoo messengers. The problem is i try to log onto either of them and its justs tries to login with no success, i am on a pay as you go tarfiff with access to wifi. Anybody got any ideas how i can fix this problem. many thanks in advance.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books (pre-BB10 devices only)
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support...and to find out if, via the plan you are paying for, you even should be expecting these services to function. Many services will not function without an adequate data plan, even via WiFi...but only your carrier can tell you exactly what services you can expect to work with your plan.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Streaming Live and Recording at the same time

Currently I allow users to stream live Audio and Video and I would like to begin recording the Audio/Video at the same time.
The only way I can figure out streaming Live and Recording is to create two NetStreams and connect with the same NetConnection and have one netstream publish "live" and the other netstream publish "record". This just doesn't seem very efficient because it would be streaming the same thing twice to the FMS.
Is this the only way to go about this? or am I going the wrong way with this?

What you want to do is record to FMS. Then use NetStream.Play(filename, -1) to only play live.

Firefox loses the saved users and history after awhile!

When I first start Firefox all is fine, the history is there and working, all the saved user/pass is there but after awhile it's like firefox loses it's memory and I need to restart the browser to get it all up and running again. Is it a config I need to do in about:config or what?
This didn't happen when I was using Windows 7 and FF, but now under Ubuntu 10.04 it happens all the day.
== This happened ==
A few times a week
== Ubuntu went to 10.04 LTS!

Even in safe mode it loses it's memory, but it comes back real fast.
Got a terminal up and running and it tells me this:
<code>
(firefox-bin:2691): Gdk-WARNING **: XID collision, trouble ahead
</code>
Can't find anything out on google about this, but I'm not alone with having this problem with Ubuntu and Firefox in Sweden.
Therefore, is it Firefox it self or is it in Ubuntu?

How do I use my serial number to find information about my MacBook Pro's Processor and RAM?

So I want to find information about my MacBook Pro's processor and RAM using the serial number because the MacBook no longer works. I remember being able to find this information on the apple website before, maybe by using the coverage checker. Did they take this information out of the coverage checker? Is it no longer possible for a costumer to obtain this information?

Append the last three characters of it to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
This won't reveal how much RAM it currently has installed.
(117541)

Mid year go live and year end go live

Hi Experts,
What is the difference in configuring Mid year go live and year end go live What are difficulties we face in mid year go live.
thanks & Regards.
Akhil

https://forums.sdn.sap.com/click.jspa?searchID=21620306&messageID=6587485
you go live on the SAP payroll system in the middle of a financial year, you have an option to transfer your legacy data into the SAP payroll system.
The system provides the schema INLK for transferring your legacy data. For this purpose, you need to perform the following IMG activities:
Define the payroll periods for which you want to transfer the legacy data. For more information, refer to the IMG under Payroll India -> Legacy Data Transfer -> Define Periods for Import
Define the type of data you want to import. For more information refer to the IMG under Payroll India -> Legacy Data Transfer -> Define Pay Elements for Import
Upon execution along with the payroll driver, the schema INLK formats the information defined in the above tables as payroll results and stores the values in the database table PCL2.
For more information on the Legacy Data Transfer functionality, refer to OSS note number 506128.

Has Apple acknowledged the problem yet with itunes aborting preview of songs after about 10 seconds on windows 7 and if so is there an answer other than ipconfig?

Has Apple acknowledged the problem yet with itunes aborting preview of songs after about 10 seconds on windows 7 and if so is there an answer other than ipconfig? IPConfig /flushdns doesn't help at all. Until they fix it I will be previewing and buying my songs thru Amazon.

Doublechecking ... do you still get that if you update to iTunes 10.6.3.25 (just released today)?
http://www.apple.com/itunes/download/

My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
(i correctly got out of dfu mode after the downgrade)
i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

Anyone have any suggestions? or is everyone else just as clueless as me !

I'm about to lose it! SB Live! and KT7Pro2 follies.

Similar Messages

Maybe you are looking for