I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing- Any suggestions? I have iTunes Match turned on and everything.
I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing… Any suggestions? I have iTunes Match turned on and everything.
Thanks Terence! I can see iTunes library from neither iPhoto or iMovie . I'll check on iTunes forum.
Similar Messages
-
I got a new 25" LG ultra wide monitor and would love to use it with my macbook pro Late 2011. I can't get the resolution to the recommended 2560x1080. Can anyone help?
I found a similar question on Amazon: http://www.amazon.com/2560x1080-resolution-macbook-resolution-option-/forum/Fx15 6DUSW1J104N/Tx14L2NHT4Y3F8K/1/ref=cm_cd_ql_tlc_al?_encoding=UTF8&asin=B00JM99DIU
It looks like you may need a mini-displayport to Displayport cable. You can also try holding the option key while clicking on "scaled" to see if the option you need comes up.
~Lyssa -
I am moving my US iMac and macbook pro to Ireland. Where can I get the right power cords
I am moving to Ireland. I have several mac products. I have 2 iMac, and 3 laptops, plus all the other "fun" apple stuff. Apple TV, iPad, iPods, phones)
I need to get a power supply for both the iMacs and MacBooks. Any suggestions, I can't seem to find them on line at the apple website.Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out. -
Issue: I synced my iphone with itunes, I then deleted many songs from the iphone, when I sync to itunes again is there any way to have itunes duplicate what it sees on the iphone rather than the other way around?
so, if I delete all music on itunes then connect my iphone all my music on the iphone will then be deleted?
-
I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs. in order to start rebuilding my music collection?
You should be able to recover the media with the tips in this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into a newly authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That should switch the assocation of the device to the new library but it is not something I've personally tested.
When you get it all working, make a backup!
tt2 -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
I would like to copy my iPhoto (9.4.1) library from my Mac Pro (10.7.5) to a Macbook Pro (10.7.5). Can I drag the iPhoto Library from the Pictures folder to Air Drop and send them to the MacBook? If I then move that to the Pictures folder on the MacBook will that then be a usable iPhoto library on the Macbook?
It would be better if you could connect the two Macs via a hard wired LAN to copy the library from the Mac Pro to the MacBook. Wireless connections can have momentary dropouts which could affect the reliable copying of files.
If you do go with Air Drop be sure to open and inspect the copied library closely to confirm it was a successulf copy.
OT -
All of a sudden the screen on my 3+ year old macbook pro has blurred badly - I can hardly read the words - any ideas?
You likely didn't erase the ENTIRE drive of the later OS X operating system before installing Snow Leopard. You just targeted the Macintosh HD partition.
Try again, this time make sure to select the name and size of your boot drive at the top to catch the hidden EFI partition that's responsible for the splash screen at boot time (no screen = white)
It will take two reboots to reset the EFI again, so once Snow is installed and reboots, reboot again.
How to erase and install Snow Leopard 10.6
How to revert your Mac to Snow Leopard
Restoring firmware on Intel Mac's -
I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have check the settings on both devices and they seem to be t
There are only two things that you must do to connect a device to calendars:
1) In settings>icloud, you must log in, WITH THE CORRECT ID/PASSWORD, and
2) Turn on calendars on the same page.
You said that the iphone 4 and ipad **used** to automatically sync. Do they no long sync? -
I have a new ipad and a iphone 5 which are under same Apple ID. I lso have a macbook that uses an older apple ID. How can I get the macbook to have same Apple ID as the other 2 devices
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer -
I have an iphone5 and a macbook pro. How on earth do you get the movies from your iphone onto your macbook pro!!!
ah thanks nick, i have found this sentence a couple of times....
Turn on iPhone and connect it to your computer.
How do you "connect" your iphone to your macbook pro, the bluetooth just doen't work, is there a usb cable? -
what is the best way to "upgrade" a powerbook g4 with a powerpc chip? it seems that many things are not supported these days. can't download software, update my iphone, download video, etc. can i get the latest software? thanks for the help!
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
The DVD should look like this
Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
Cheers, Tom -
I have a MacBook, made in 2010. I can't get the eject function to work. I have a DVD in now and want to eject it and put another one in. Command-E, dragging it to the trash or Find-Eject does not work. Ideas?
Hi there. Hear are some other options . Hold down for click on the track pad while restarting and keep it down all the way thru boot. Or use right click on a mouse. If it's stuck, sometimes sticking a business card in top edge of slot while trying the eject option can work.
-
I downloaded new Firefox but now can't open Firefox at all. It says it is not supported on my system. How can I get the earlier version which I deleted?
http://www.mozilla.com/en-US/firefox/4.0/system-requirements/ <br />
Mac
Operating Systems
* Mac OS X 10.5
* Mac OS X 10.6
Recommended Hardware
* Macintosh computer with an Intel x86 processor
* 512 MB of RAM
* 200 MB hard drive space
For older Macs that aren't supported in Firefox 4.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/
Maybe you are looking for
-
Production of semifinished materials
Dear gurus, i had a scenario where semi finished material is combination of different batches,for production of semi finished material i had 6 operations in which up to 3rd operation i have 3 production lines in which each batch in the line is i
-
Error when starting WLS/JRockit (10.3.3) on Win7/64
Hi - In our team when we start our local WLS domains we see the following error : <10-01-2011 10:36:46 CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool> ASSERTION FAILED: 'fio_delete(buf)' In unlock_repository() (src/ext/j
-
Why am I getting a message that iTunes is not installed when trying to access items in IE?
When I am using IE and find an app on the store, then click the button to view in iTunes I am redirected to the download screen. I tried subscribing to a podcast recently as well and got the message that iTunes was not installed on my computer. When
-
Having trouble with my airport wireless and connecting to FIOS
I had FIOS installed right after the holidays and have been having trouble getting my mac and airport to connect wirelessly to FIOS. I have an actiontec router and have changed it to a WPA security key. I worked on it about two weeks ago and got it w
-
How to share JHS BC4J data model with JClient application ?
In our project, some application system using JHS Struts/JSP solution but others which need rich UI application prepare to adapt JClient solution, so whether we can share JHS BC4J data model with JClient application ?