I'm also getting the dreaded Blue Screen Of Death when I boot into Windows

This happened right after I upgraded to the most recent version of iTunes. Everytime I initially boot the computer, it would get into Windows, crashes immediately, then my system reboots and I'm able to get into windows no problem.
Reading the help section it says to go and download & reinstall the previous version of iTunes. Ok simple enough, but where on earth can I find the previous version?? The link it provides takes me to the latest version. Maybe I'm looking in the wrong place?
Can someone please direct me to where I can download the previous version?
Thanks very much.

Hi,
Thanks very much for the reply. I'm glad somebody was able to give me this information!
So I went to the website and I downloaded 8.0.0.35, BUT when I tried to install it, I got an error message that said: "A later version of iTunes is already installed on this computer."
I'm afraid if I uninstall my current iTunes, then I will lose all my playlists and stuff. There's no way to just install the old version on top of the new one? If no, is that the proper procedure to uninstall first and then reinstall?
Thanks.

Similar Messages

HT203175 I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggesti

I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggestions?

In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device

I am getting a CF10 Blue Screen of Death on an adobe null pointer?

I am getting a CF10 Blue Screen of Death on an adobe null pointer? I have confirmed an drecreated all my fonts. I cannot find anything wqrong except CF10 doesnt like it for some reason?
Below is the stacktrace. Any / all help would be very much appreciated>
java.lang.NullPointerException: Platform, Locale, and Platform Name must not be null at com.adobe.fontengine.fontmanagement.platform.PlatformFontDescription.<init>(Unknown Source) at com.adobe.fontengine.font.opentype.OpenTypeFont.getPlatformFontDescription(Unknown Source) at com.adobe.fontengine.font.FontImpl.getPlatformFontDescription(Unknown Source) at com.adobe.fontengine.font.FontImpl.getPlatformFontDescription(Unknown Source) at com.adobe.fontengine.fontmanagement.platform.PlatformFontResolverImpl.addFont(Unknown Source) at com.adobe.internal.pdftoolkit.core.fontset.impl.PDFFontSetImpl.addFont(Unknown Source) at com.adobe.internal.pdfm.util.FontSetBuilder.loadFontsPath(FontSetBuilder.java:418) at com.adobe.internal.pdfm.util.FontSetBuilder.loadSystemFonts(FontSetBuilder.java:346) at com.adobe.internal.pdfm.util.FontSetBuilder.makePDFFontSet(FontSetBuilder.java:239) a t com.adobe.internal.pdfm.util.FontSetBuilder.getPdfFontSet(FontSetBuilder.java:93) at com.adobe.internal.pdfm.PDFM7Factory.getPdfFontSet(PDFM7Factory.java:97) at coldfusion.document.DocumentServiceImpl.getAssemblerFontSet(DocumentServiceImpl.java:524) at coldfusion.pdf.PDFForm.populateFields(PDFForm.java:291) at coldfusion.tagext.lang.PDFFormTag.doEndTag(PDFFormTag.java:347) at cfEMR2ecfc1799832313$funcPRINTPDF_EMR._factor194(C:\Production\cfmx\web_applications\free recall\Model\EMR.cfc:5059) at cfEMR2ecfc1799832313$funcPRINTPDF_EMR._factor198(C:\Production\cfmx\web_applications\free recall\Model\EMR.cfc:4783) at cfEMR2ecfc1799832313$funcPRINTPDF_EMR.runFunction(C:\Production\cfmx\web_applications\fre erecall\Model\EMR.cfc:4771) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:472) at coldfusion.filter.SilentFilter.invoke(SilentFilter.java:47) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:405) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:368) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:55) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:321) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:518) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:660) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:469) at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:2373) at coldfusion.tagext.lang.InvokeTag.doEndTag(InvokeTag.java:402) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2800) at cfappController2ecfm586097899._factor2031(C:\Production\cfmx\web_applications\freerecall\ Controller\appController.cfm:8830) at cfappController2ecfm586097899._factor5165(C:\Production\cfmx\web_applications\freerecall\ Controller\appController.cfm:8811) at cfappController2ecfm586097899.runPage(C:\Production\cfmx\web_applications\freerecall\Cont roller\appController.cfm:1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:244) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:444) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.IpFilter.invoke(IpFilter.java:64) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:428) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:112) at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:30) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:94) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:219) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:305) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:243) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:224) a t org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:169) a t org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:168) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:928) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:414) at org.apache.coyote.ajp.AjpProcessor.process(AjpProcessor.java:204) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.jav a:539) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:298) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615) at java.lang.Thread.run(Thread.java:722)

Thanks Jeremy,
I'm afraid that it seems to have gone beyond help at this stage and my laptop is currently sat on a workbench at Apple :-(
I must say that I am more than a little disappointed. I bought into Apple for quality and reliability and now I am sat here on my wifes Windows PC because an Apple update has gone bad.
I certainly hope this isn't the first sign of decline of the Apple brand. The Apple product costs a lot, but up until now the quality and dependability has been the overriding reason to pay the extra money. My wife has always been sceptical, and this incident has not furthered my cause to get a new MAC when the PC dies. Shame.
I too am now wondering how far Apple are prepared to dilute their identity to squeeze into the Microsoft market.... remember Apple, you are bigger than that. You are cash rich for a reason and you are are only as good as your last big success: look at Nokia!
Thanks again
Dino

Blue screen of death when La Cie external firewire drive connected

I tested a LaCie external firewire drive on my iMac and it worked fine. I packed it up well and posted it to a friend who gets the blue screen of death when the LaCie is connected to her iMac. She's not even trying to boot from it.
My iMac is 9.1 and hers is 8.1. We are both running Snow Leopard. Was there some problem once upon a time with chipsets or am I mis-remembering?
TIA

Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no player is required to read a burned disc, having a "good" one from a high quality blank will help

Blue Screen of Death When Plugging in Ipod Touch 4g

Hello,
Im reciving blue screen of death when I plug in my ipod touch 4g. I have updated itunes, Drivers, This happens every time and I suspect it happens when my computer says found new hardware reconizing the ipod as a camera because once I pluged my ipod in and it didn't pop up found camera hardware and it worked. So does anyone know how to fix this or disable my comp from reconizing the ipod as a camera? Thanks in advance
p.s im using XP service pack 3

have u tried pluging an other usb (eg mp3 or mem stick) it to ur compuer? is it doing it with these?
if its only doing this with ur ipod try the following
1 go to start menu and in the search box type in usb
look for device manager
2. open the disk drives and plug in ipod touch and removeable disk should show up
3, try usb drives updates
because the ipod has a camera most older computers running xp think its a camera,
if u have and usb mem stick copy ur itunes folder on to it and copy it to a computer running vista or windows 7 and c it its doing it on one of them, if its doing it on one them there may be other hardware isues with ur ipod touch

Blue screen of death when syncing verizon I phone

I receive a blue screen of death when I try to sync my I phone 4 with I tunes on my laptop. The initial sync went fine, I am connected to my Exchange server for email and have downloaded CD's to I Tunes, when I try to sync...blue screen. I have run registry fix and virus programs and have no errors. Does anyone know how to fix this?

The first response was correct, the computer (xps 1210) used a logitech camera driver that I did not recognize so I deleted it. The software was still active and crashed the computer. Fix was reinstall logitech software and driver. Updating the driver would have probably worked. Thank you!

I get the msg "email address not verified" when I sign into iTunes account, however it shows my account as already verified

I get the msg "email address not verified" when I sign into iTunes account, however it shows my account as already verified, sends me back to sign in again & then gives me the same msg all over again. How do I fix this and access my iTunes account from my iPod Touch?

I'm having the same problem. Did you ever find out how to fix it?

Satellite A105-S4284 gets Blue Screen of Death when coming out of standby

MySatellite A105-S4284 runnings Windows XP gets a BSOD after coming out of standby or hibernation. With standby, I'll see the login screen where I enter my password, and then it may show the desktop background or even the open app (Outlook or Word, typically) for a second, afterwhich the BSOC appears. For weeks I was getting a black screen sporadically after standby. Researched the problem and saw recommendations to update BIOS. So I updated the BIOS to the latest version, and then I started getting blue screens of death rather than a black screen. Thought the problem was McAfee, because I'd get crashes right after McAfee became active in the background, sometimes without going into standby. Cancelled McAfee, took it off with the cleaner, used Avast instead, and that seemed to help. But then BSODs came back. I uninstalled non-essential software, clearned registry with CC Cleaner, freed up more HD space and defragged, ran SpyBot, etc - but I still get the BSOD almost every time I go into standby or hibernate.
The stop messages on the BSOD don't show a driver. and all begin with 0x0000007E (0x000000C5, ... and then differ after that. One recent one followed with 0x804E13D5, 0xAA6B9B8C, 0xAA6B9888). Does that mean anything?
I've installed Microsoft's debugging tools to look at the dumps after a BSOD. Here is output for two recent crashes. Doesn't point to a driver. NTKRMLMP.exe is what crashes - do I need to replace that from the I386 folder somehow? I did have my Matsu**bleep**a DVD-CD drive suddenly quit a time or two until the computer was restarted. Should I reinstall the DVD driver? Or the graphics driver? Worried that I might break something by doing that.
Loading Dump File [C:\WINDOWS\Minidump\Mini030809-02.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp_sp3_gdr.080814-1236
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805634c0
Debug session time: Sun Mar 8 16:05:07.187 2009 (GMT-5)
System Uptime: 0 days 4:22:53.890
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
BugCheck 1000007E, {c0000005, 804e13d5, a9860b8c, a9860888}
Probably caused by : ntkrnlmp.exe ( nt!ExAllocatePoolWithTag+7a9 )
Followup: MachineOwner<snip>
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. <SNIP>
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: 804e13d5, The address that the exception occurred at
Arg3: a9860b8c, Exception Record Address
Arg4: a9860888, Context Record Address
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
FAULTING_IP:
nt!IopfCallDriver+2d
804e13d5 ff548638        call    dword ptr [esi+eax*4+38h]
EXCEPTION_RECORD: a9860b8c -- (.exr 0xffffffffa9860b8c)
ExceptionAddress: 804e13d5 (nt!IopfCallDriver+0x0000002d)
   ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 00000000
   Parameter[1]: 00000070
Attempt to read from address 00000070
CONTEXT: a9860888 -- (.cxr 0xffffffffa9860888)
eax=0000000e ebx=00000001 ecx=87546020 edx=853fe1a0 esi=00000000 edi=f772471c
eip=804e13d5 esp=a9860c54 ebp=a9860ca0 iopl=0         nv up ei ng nz ac po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000             efl=00010292
nt!IopfCallDriver+0x2d:
804e13d5 ff548638        call    dword ptr [esi+eax*4+38h] ds:0023:00000070=????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 2
PROCESS_NAME: System
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
EXCEPTION_PARAMETER1: 00000000
EXCEPTION_PARAMETER2: 00000070
READ_ADDRESS: 00000070
FOLLOWUP_IP:
nt!ExAllocatePoolWithTag+7a9
805517b9 e9e4feffff      jmp     nt!ExAllocatePoolWithTag+0x7bf (805516a2)
BUGCHECK_STR: 0x7E
DEFAULT_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE
LAST_CONTROL_TRANSFER: from 804e13d9 to 804e13d5
STACK_TEXT:
a9860c6c 804e13d9 8753d018 853fe1a0 00000000 nt!IopfCallDriver+0x2d
a9860ccc 805517b9 00000000 00000002 00000000 nt!IopfCallDriver+0x31
a9860dac 80575723 a9f4533c 00000000 00000000 nt!ExAllocatePoolWithTag+0x7a9
a9860ddc 804ec6d9 f7720ce2 a9f4533c 00000000 nt!PspSystemThreadStartup+0x34
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!ExAllocatePoolWithTag+7a9
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 48a4044a
STACK_COMMAND: .cxr 0xffffffffa9860888 ; kb
FAILURE_BUCKET_ID: 0x7E_nt!ExAllocatePoolWithTag+7a9
BUCKET_ID: 0x7E_nt!ExAllocatePoolWithTag+7a9
Followup: MachineOwner
0: kd> lmvm nt
start    end        module name
804d7000 806ff000   nt       # (pdb symbols)          c:\symbols\ntkrnlmp.pdb\B883868B88CB415A92EC010CF6A115A52\ntkrnlmp.pdb
    Loaded symbol image file: ntkrnlmp.exe
    Mapped memory image file: c:\symbols\ntkrnlmp.exe\48A4044A228000\ntkrnlmp.exe
    Image path: ntkrnlmp.exe
    Image name: ntkrnlmp.exe
    Timestamp:        Thu Aug 14 05:09:14 2008 (48A4044A)
    CheckSum:         0021B760
    ImageSize:        00228000
    File version:     5.1.2600.5657
    Product version: 5.1.2600.5657
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        1.0 App
    File date:        00000000.00000000
    Translations:     0401.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     ntkrnlmp.exe
    OriginalFilename: ntkrnlmp.exe
    ProductVersion:   5.1.2600.5657
    FileVersion:      5.1.2600.5657 (xpsp_sp3_gdr.080814-1236)

In safe mode it is not possible to standby. That is disabled. Tried to make it possible with Toshiba's power control service, but it is not available.
In a new account, the BSOD still occurs. I created a new account, logged out of my account, and went to the new one. Tried standby. It came out of standby for a second and then had the blue screen of death.
In checking the event manager, I seen errors shortly before crashes sometimes that involve the CD.
So I went to Toshiba.com and downloaded the DVD RAM driver and ran it, reinstalling the driver, and then restarted. I also saw that there was C-Dilla driver in my drivers. I uninstalled the SafeCast program that I think is associated with C-Dilla, moved the C-Dilla driver out of the drivers to a distant folder, unchecked C-Dilla in MSCONFIG so it won't load (it was still there after removing SafeCast), and then reinstarted. So with a new DVD Ram driver and neutering, I hope, of C-Dilla, I tried things again and the system appeared to be crash free - better than it had been. But then a crash occurred - BSOD - and upon restart, the CD locked up, and crashed again.
After restarting, there was a new dialog that popped up after Windows launched indicating that there had been an error with SONIC DLA. Before the crash, there was an event n the event viewer:
My last error comes from the Plug and Play Manager:
The device 'MAT**bleep**A DVD-RAM UJ-841S' (IDE\CdRomMAT**bleep**A_DVD-RAM_UJ-841S________________1.60____\5&226f6cf2&0&0.0.0) disappeared from the system without first being prepared for removal.
Hmmm. So things are still vulnerable. Any ideas? Buy new CD drive? Or new computer?

Why is Encore 6.0 giving me the "blue screen of death" when I try to create a menu?

When I purchased my student edition 6.0 (which I love by the way), Encore did not have any of the libraries loaded up on it. After reading some discussions, I downloaded the missing folders.
Now, when I try to create a menu, my computer shuts down and gives me "the blue screen of death" as they call it (a blue screen with white writting, counting up to 100%, and saying Windows is preparing to crash...or something about the hard drive crashing....I can't remember because it goes off the screen so quickly).
I've done this several times - my computer only does this when I try to create a menu in encore, and not in any other part of encore. It hasn't happened in any of the other programs either (Premiere Pro and Audition are the only other programs I have used so far), or any other times I have my laptop.
Because of this, I am not too concerned since it seems Encore is the problem. However, I do not want any other problems to escalade from this either.
Am I doing something wrong? Can someone please help me? I'm working on my Senior Thesis (a video) this year, and I really really cannot afford to have my computer crash on me.
Please and thank you,
Meghin

Read Bill Hunt on BSOD http://forums.adobe.com/thread/772169
-and an Encore fix http://forums.adobe.com/thread/1060443

Blue Screen of Death When opening iTunes.

I am at a loss. For the past six months I have been trying to figure out why my computer has a blue screen of death and then restarts "nearly" everytime i open iTunes. The "nearly" is what's driving me nuts because every once in a while it will open ONCE and then start crashing again. I don't even do anything to help it open it just miraculously works every now and then. It even craches the comp when starting iTunes in safe mode. The blue screen error says "Page Fault in non-paged area". iTunes worked fine for months before this randomly started happening. I have tried every solution I have seen, even ones that weren't for my problem. So far I have:
Manually uninstalled iTunes and QT and reinstalled the standalone QT then iTunes.
Disabled itunes helper and ipod service before starting.
Disabling all other services and start-up items.
Installed current bios and drivers (as far as I can tell)
Installed current windows installer.
Updated microsoft products including .net
Updated Java runtime environment
Replaced ram
I have a pentium 4 1.6ghz with soyo mobo and a RAID card(mirrior) set-up. 1 gig of pc133 ram. I can ul the minidump if needed.
I figured out how to load my podcasts on my ipod manually but I want to get a video ipod so I need itunes. PLEASE HELP!!
Windows XP

there's a few more things worth checking on. but let's also capture a minidump of the crash and send it to someone who can interpret minidumps.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
send it to this email address
in the email, put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
love, b

Blue Screen of death - now can't load Windows (even in safe mode)

Last night laptop (Satellite L500 19Z; Win 7 64 bit) crashed whilst playing CIV4. Got a blue screen of death; before I had chance to read any of the error messages on it the machine rebooted.
It loaded windows in safe mode fine then, and informed me as it had loaded safe mode OK the problem will be related to some recently installed software and I should uninstall programs I'd installed until it would load normally. As it was late last night I shut down and thought I'd sort it in the morning (in retrospect this may have been a mistake ....).
Today, when the machine tries to boot up it attempts a Startup Repair; unfortunately this fails every time and it says "Startup repair has tried several times but still cannot detemine the cause of the problem"
I looked at the log it produces but it passes all the individual tests.
I also can't access the advanced options for system recovery & support, which appears on the Startup Repair dialog box as it demands I be logged in, which apparently I'm not (presumably as the machine never got to the windows login screen before trying the startup repair). The error message reads "you must be logged in to access system recovery options. If you are having trouble logging in please contact your computer administrator for assistance. please click OK to restart the computer."
I've had a go at booting into the various advanced options (safe mode, safe mode with command prompt etc. but the outcome is the same).
I also tried the Repair your Computer option from the advanced boot options screen, but after the screen where it asks you to choose the language and keyboard, I get the same login error mentioned above.
Is there a way to repair or even run the hard disk based windows recovery (haven't got the recovery DVD with me as I'm away from home for a couple weeks) without logging into windows? I would have expected there to be but have yet to figure out how to do it.
(there are no disks in the disk drive, no other devices attached to the laptop - I've tried it with mains power and with the battery and have not noticed any differences)
Thanks
James

Normaly the reinstall data is on a separate part on your HD, not in Windows.
The register is only used for Windows.
If it doesn't work you can always try to reinstall from a DVD later.
It does mean all your data on C:\ will be gone. If you can hook your HD on an other PC you can try to safe your work with a recover prog.

Blue Screen of Death when calling skype on iphone/...

Every time i call a person on skype on iphone or s6 (i think any smartphone) my computer crashes and causes blue screen of death. i have windows 8.1 running and this also happened on win 8. i have tried uninstalling, clean installing, deleting all old files of skype and then installing but nothing has worked.
on aside, when i get a call from another desktop skype as well, invariably, i cant connect the call at first attempt. clicking on accept does nothing and it will continue rining. even clicking on reject does not work after. the only option is to kill skype from task manager and then restart it. it then works fine for first call i make. it then has similar issue on later calls. not neccessarily the 2nd call. its regular but also random in nature.
i have not idea what is the problem. do you?
skype version 7.5.0.102
here is the summary of BSoD last night
Fault bucket AV_rtsuvc!Unknown_Function, type 0
Event Name: BlueScreen
Response: http://wer.microsoft.com/responses/resredir.aspx?sid=10&Bucket=AV_rtsuvc!Unknown_Function&State=1&ID...
Cab Id: 820ea6ec-6de2-4d12-bd98-0fdae73a883d
Problem signature:
P1: 50
P2: ffffe000ef655ff8
P3: 0
P4: fffff800e54fc0c0
P5: 0
P6: 6_3_9600
P7: 0_0
P8: 768_1
P9:
P10:
Attached files:
C:\Windows\Minidump\061315-85671-01.dmp
C:\Users\Madhvendra\AppData\Local\Temp\WER-220125-0.sysdata.xml
C:\Windows\MEMORY.DMP
C:\Users\Madhvendra\AppData\Local\Temp\WER2DD3.tmp.WERInternalMetadata.xml
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_50_a9ac997f524f3a2a4a3ec8b634fedacf174d_00000000_cab_15346984
Analysis symbol:
Rechecking for solution: 0
Report Id: 061315-85671-01
Report Status: 0
Attachments:
BSoD 14 June 15.zip ‏10 KB

Your Realtek camera drivers are crashing. Make sure you have the latest drivers installed for your video card and camera. If the problem continues to occur update the camera drivers to the generic Microsoft camera drivers that come with the OS. Steps on how to update to those drivers are covered in the below graphic:

Blue screen of death when running labwindows, pxi chassis, and windows 2000

Hi, when programming under labwindows the software crashes cvi, and windows NT and i get the blue screen of death...usually every hr or so. I checked the hw config and there are no conflicts. Is it normal to share IRQ 9 for all? is there a document that explains the I/O map addresses for the pxi to check for conflicts? I got all NI instruments, but one irig board. Currently only talking to the DMM and the switch.

me also
-win2000
-cvi 6.0
-pxi1006 8176cpu
-dmm4060
-IVI1.83 ,nidaq693,nidmm201,nidmm21
- break program after a nidmmread function
- terminate program
- rerun program
- DMM Blue Screen of Death..everytime
- Make Software User Friendly -
Attachments:
BADDMM.ZIP ‏3 KB

Blue screen of death when building blu-ray in Encore CS6

I recently purchased a new laptop and installed Adobe Master Collection CS6. I purchased the laptop for video capture and editing, as well as for blu-ray authoring.
Unfortunately, although the computer and software works fine for video capture and editing, I am unable to author a blu-ray. For authoring, I am using Adobe’s Encore CS6. After checking and previewing my creation, I attempt to build to disc using Encore. About 2 seconds after clicking the build disc in Encore, I get the “blue screen of death” (BSOD). This happens every time I try to build to blu-ray (only blu-ray has this issue; I am able to build to a DVD). I am using an external blu-ray drive on USB 3.0.
I am using Encore version 6.0.0.492
Here are the blu-ray drive specs:
Logitec USB 2.0/3.0 Bus powered portable bluray drive unit, LBD-PME6U3VBK
PIONEER BD-RW BDR-TD05 USB Device
Driver: 6.1.7601.17514
C:\windows\system32\DRIVERS\cdrom.sys
\windows\system32\Drivers\PXHlpa64.sys
\windows\system32\DRIVERS\tdcmdpst.sys
\windows\SysWOW64\drivers\Afc.sys
Renesas USB 3.0 driver also installed
The computer specs are as follows:
§ Manufacturer: Toshiba
§ Manufacturer Part Number: PSAY1U-05U027
§ Product Line: Satellite
§ Product Series: P755
§ Product Model: P755-S5375
§ Product Name: Satellite P755-S5375 Notebook
§ Product Type: Notebook
§ Processor Manufacturer: Intel
§ Processor Type: Core i7
§ Processor Model: i7-2670QM
§ Processor Speed: 2.20 GHz
§ Processor Core: Quad-core (4 Core)
§ Cache: 6 MB
§ Chipset Manufacturer: Intel
§ Chipset Model: HM65 Express
§ Standard Memory: 4 GB
§ Memory Technology: DDR3 SDRAM
§ Memory Standard: DDR3-1333/PC3-10600
§ Number of Total Memory Slots: 2
§ Hard Drive Capacity: 500 GB
§ Screen Size: 15.6"
§ Display Screen Type: Active Matrix TFT Color LCD
§ Aspect Ratio: 16:9
§ Screen Mode: WXGA
§ Backlight Technology: LED
§ Screen Resolution: 1366 x 768
§ Graphics Controller Manufacturer: Intel
§ Graphics Controller Model: HD 3000
§ Graphics Memory Capacity: 1.65 GB
§ Graphics Memory Accessibility: Shared
§ Ethernet Technology: Fast Ethernet
§ Wi-Fi: Yes
§ Wi-Fi Standard: IEEE 802.11b/g/n
§ Webcam: Yes
§ Operating System: Genuine Windows 7 Home Premium with SP1
§ Operating System Architecture: 64-bit
§ Pointing Device Type: TouchPad
§ Number of Cells: 6-cell
§ Battery Chemistry: Lithium Ion (Li-Ion)
§ Width: 15.0"
§ Depth: 9.8"
§ Weight (Approximate): 5.40 lb
§ Package Contents:
§ Satellite P755-S5375 Notebook
§ Lithium Ion Battery
§ AC Adapter
§ Green Compliant: Yes
§ Green Compliance Certificate/Authority: RoHS
Installed programs:
Name                                                            Version
Microsoft Application Error Reporting                           12.0.6015.5000
Microsoft Office Click-to-Run 2010                              14.0.4763.1000
Microsoft Office 2010                                           14.0.4763.1000
Windows Live Essentials                                         15.4.3502.0922
Apple Application Support                                       2.1.7
Windows Live Writer                                             15.4.3502.0922
Microsoft_VC90_MFCLOC_x86                                       1.00.0000
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148 9.0.30729.4148
TOSHIBA Web Camera Application                                  2.0.3.3
Windows Live Messenger                                          15.4.3538.0513
Microsoft_VC90_CRT_x86                                          1.00.0000
Google Toolbar for Internet Explorer                            1.0.0
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219     10.0.40219
Microsoft Visual C++ 2005 Redistributable (x64)                 8.0.61000
Microsoft SQL Server 2005 Compact Edition [ENU]                 3.1.0000
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219     10.0.40219
Toshiba Online Backup                                           2.0.0.31
TOSHIBA ReelTime                                                1.7.21.64
Windows Live Remote Client Resources                            15.4.5722.2
Windows Live SOXE Definitions                                   15.4.3502.0922
Adobe AIR                                                       3.1.0.4880
Windows Live Mesh ActiveX Control for Remote Connections        15.4.5722.2
Windows Live Communications Platform                            15.4.3502.0922
Windows Live Movie Maker                                        15.4.3502.0922
Apple Software Update                                           2.1.3.127
Windows Live UX Platform Language Pack                          15.4.3508.1109
Windows Live Photo Gallery                                      15.4.3502.0922
bl                                                              1.0.0
Windows Live Mail                                               15.4.3502.0922
Java(TM) 6 Update 25                                            6.0.250
MSVCRT_amd64                                                    15.4.2862.0708
TOSHIBA Face Recognition                                        3.1.17.64
ph                                                              1.0.0
Adobe Widget Browser                                            2.0.348
Windows Live Writer                                             15.4.3502.0922
Mesh Runtime                                                    15.4.5722.2
TOSHIBA Supervisor Password                                     1.63.51.2C
Adobe Acrobat X Pro - English, Fran軋is, Deutsch                10.1.1
Adobe Reader X MUI                                              10.0.0
TOSHIBA Media Controller Plug-in                                1.0.7.5
Windows Live Photo Gallery                                      15.4.3502.0922
Windows Live Photo Common                                       15.4.3502.0922
Label@Once 1.0                                                  1.0
PDF Settings CS6                                                11.0
Toshiba Book Place                                              2.2.7530
Windows Live PIMT Platform                                      15.4.3508.1109
TOSHIBA Wireless LAN Indicator                                  1.0.5
D3DX10                                                          15.4.2368.0902
Utility Common Driver                                           1.0.52.3C
Junk Mail filter update                                         15.4.3502.0922
Windows Live Movie Maker                                        15.4.3502.0922
TOSHIBA HDD/SSD Alert                                           3.1.64.9
Windows Live Remote Service                                     15.4.5722.2
Toshiba App Place                                               1.0.6.3
Windows Live Mesh                                               15.4.3502.0922
Windows Live Language Selector                                  15.4.3538.0513
QuickTime                                                       7.72.80.56
Renesas Electronics USB 3.0 Host Controller Driver              2.0.34.0
TOSHIBA Value Added Package                                     1.6.1.64
Microsoft_VC80_CRT_x86                                          8.0.50727.4053
Google Update Helper                                            1.3.21.111
TOSHIBA HDD Protection                                          2.2.2.15
7-Zip 9.20 (x64 edition)                                        9.20.00.0
TOSHIBA PC Health Monitor                                       1.7.9.64
Windows Live Mail                                               15.4.3502.0922
Adobe Help Manager                                              4.0.244
MSVCRT                                                          15.4.2862.0708
Windows Live Remote Client                                      15.4.5722.2
Blackmagic ATEM Switchers                                       3.0.1.0
Microsoft_VC90_MFC_x86                                          1.00.0000
Windows Live Photo Common                                       15.4.3502.0922
Windows Live ID Sign-in Assistant                               7.250.4232.0
Microsoft Visual C++ 2005 Redistributable                       8.0.61001
Windows Live Messenger                                          15.4.3538.0513
Windows Live Mesh                                               15.4.3502.0922
Windows Live Writer                                             15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17    9.0.30729
TOSHIBA Hardware Setup                                          1.63.1.37C
Microsoft Silverlight                                           4.0.50401.0
PlayReady PC Runtime x86                                        1.3.0
Intel(R) WiDi                                                   2.1.41.0
Windows Live MIME IFilter                                       15.4.3502.0922
TOSHIBA Flash Cards Support Utility                             1.63.0.12C
TOSHIBA eco Utility                                             1.3.5.64
Windows Live UX Platform                                        15.4.3502.0922
TOSHIBA Wireless Display Monitor                                1.0.1
Debugging Tools for Windows (x64)                               6.12.2.633
Windows Live Remote Service Resources                           15.4.5722.2
Windows Live Writer Resources                                   15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17    9.0.30729
Intel(R) PROSet/Wireless WiFi Software                          14.01.1000
Windows Live Installer                                          15.4.3502.0922
TOSHIBA Disc Creator                                            2.1.0.11 for x64
PlayReady PC Runtime amd64                                      1.3.0
Windows Live SOXE                                               15.4.3502.0922
Java Auto Updater                                               2.0.4.1
TOSHIBA Bulletin Board                                          1.6.08.64
Crash details:
Problem signature:
Problem Event Name:            BlueScreen
OS Version:                           6.1.7601.2.1.0.768.3
Locale ID:                              1041
Additional information about the problem:
BCCode:                               d1
BCP1:                                   0000000000000001
BCP2:                                   0000000000000002
BCP3:                                   0000000000000008
BCP4:                                   0000000000000001
OS Version:                           6_1_7601
Service Pack:                        1_0
Product:                                768_1
Files that help describe the problem:
C:\Windows\Minidump\090312-28516-01.dmp
C:\Users\xxx\AppData\Local\Temp\WER-62696-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
DMP file details
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02e04000 PsLoadedModuleList = 0xfffff800`03048670
Debug session time: Mon Sep 3 02:27:16.190 2012 (UTC + 9:00)
System Uptime: 0 days 0:06:50.096
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck D1, {1, 2, 8, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )
Followup: MachineOwner
0: kd> !analyze -v
*                        Bugcheck Analysis                                    *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000001, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation
Arg4: 0000000000000001, address which referenced memory
Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030b2100
0000000000000001
CURRENT_IRQL: 2
FAULTING_IP:
+6130613031313361
00000000`00000001 ??              ???
PROCESS_NAME: System
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
TRAP_FRAME: fffff80000b9c740 -- (.trap 0xfffff80000b9c740)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80000b9c801 rbx=0000000000000000 rcx=fffffa8004586618
rdx=fffff80000b9c8d8 rsi=0000000000000000 rdi=0000000000000000
rip=0000000000000001 rsp=fffff80000b9c8d0 rbp=0000892fc0ba4327
r8=fffff80000b9c8d0 r9=0000000000000000 r10=0000000004216094
r11=000000005e040600 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
00000000`00000001 ??              ???
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80002e82769 to fffff80002e831c0
FAILED_INSTRUCTION_ADDRESS:
+6130613031313361
00000000`00000001 ??              ???
STACK_TEXT:
fffff800`00b9c5f8 fffff800`02e82769 : 00000000`0000000a 00000000`00000001 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
fffff800`00b9c600 fffff800`02e813e0 : 00000000`00000002 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`00b9c740 00000000`00000001 : 00000000`00000000 00000000`5e040600 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff800`00b9c8d0 00000000`00000000 : 00000000`5e040600 00000000`00000000 00000000`00000000 00000000`080e8118 : 0x1
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiPageFault+260
fffff800`02e813e0 440f20c0        mov     rax,cr8
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!KiPageFault+260
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 4fa390f3
FAILURE_BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_nt!KiPageFault+260
BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_nt!KiPageFault+260
Followup: MachineOwner

Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no player is required to read a burned disc, having a "good" one from a high quality blank will help

Windows blue screen of death crash during Boot Camp driver install

I have been trying to get Windows running under Boot Camp on my 2.66 GHz Alu iMac, but without success.
Boot Camp partitions the drive and Windows XP SP2 installs properly. I boot into Windows, and then insert my Leopard install DVD to install the Apple drivers.
The driver installation gets about halfway, then the machine crashes with a blue screen of death and restarts automatically. It puts me back in Windows, with no drivers installed.
I am installing the Boot Camp drivers from the Leopard retail DVD. This machine is missing the Leopard install/restore discs that came with it, and Apple want to charge £99 for a replacement set.
Is there any way I can get the Boot Camp drivers installed, or do I need to find a friend with the exact same machine and original system discs and use those?

Aloha Adam.
Don't know whether this is helpful, but below is a list of drivers that are installed (as of Aug 08).
Also, if you have not already, you may find FAQ helpful, as well, at URL: http://support.apple.com/kb/HT1656
Lastly, though they're a year old, the Update 2.1 is in .exe format, so if you can get it the .exe download package onto your installed Windows OS somehow (e.g., copied onto a CD, IF Windows can read it), you might stand a chance of alternate means of installing the drivers.
If this helps, please so indicate.
Thanks,
HJ
"Drivers, Macintosh features within Microsoft Windows, other
Which drivers are included on the Mac OS X 10.5 (Leopard) DVD?
The Mac OS X 10.5 (Leopard) DVD contains the following Macintosh drivers for Windows:
Apple Bluetooth
Apple Keyboard Support
Apple Remote Driver
Apple Trackpad
Atheros 802.11 Wireless
ATI Graphics
Boot Camp Control panel for Microsoft Windows
Boot Camp System Task Notification item (System Tray)
Broadcom Wireless
Intel Chipset Software
Intel Integrated Graphics
iSight Camera
Marvel Yukon Ethernet
nVidia Graphics
Realtek Audio
SigmaTel Audio
Startup Disk Control panel for Microsoft Windows"

I'm also getting the dreaded Blue Screen Of Death when I boot into Windows

Similar Messages

Maybe you are looking for