I'm among the first 2300 orders, and still No shipping email? Status not working either

Anyone else in same situation?
My order numbers are among the first 2300 in location D771001, and I STILL have not received a shipping email. Somehow, verizon CSR says they can't check order status either because they DO NOT have access to such system, What????
My account is already debited and i'm not getting anything.
So many other people already got their shipping email, and some are after order number 3000

Have you tried going to fedex and using your reference number like another poster suggested to see if you can get tracking information, if possibly the e-mail is just messed up and your phone has actually shipped even though you didn't get the e-mail. I ordered my phone around 2:50AM EST and received my order confirmation at 2:53AM EST and then received my shipping confirmation last night at 9:38PM. If you have your order confirmation e-mail you should have your reference number perhaps you could try that in another thread someone posted the link and the how to on that kind of searching via fed-ex. It's worth a shot.
Johnita

Similar Messages

HT1386 I don't have the iPhone button, as illustrated in the first picture. I've tried the tips that are mentioned in the first few steps and still nothing. My phone won't sync at all! I'm not completely computer illiterate; but, I am not well versed eith

I don't have the iPhone button, as illustrated in the first picture. I've tried the tips that are mentioned in the first few steps and still nothing. My phone won't sync at all! I'm not completely computer illiterate; but, I am not well versed either. Could someone please tell me what I need to do to bring this back so I can sync my phone and laptop (windows op system).

The screen-shot is on a Mac computer. It is very similar in Windows iTunes. Have a look at this set of instructions instead.
http://support.apple.com/kb/ph12313

HT1349 I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

The warranty is only good in the U.S.
You woulod have to send it to someone in the U.S. They could take it in and if it is defective, then it would be replaced.

Cableone innstalled a new server and now my thunderbird email will not work. What do I do now?

Cableone, our internet provider, has changed from a Google server to their own server and now my Thunderbird email will not work. They have directions listed to make it work, but this does not work. I have also contacted Cableone's technical support and they say because thunderbird is not their system they have no responsibility to make it work. I prefer to use Thunderbird for my email - how can I make it work? Also, I have tried the Thunderbird 'Automatic Account Configuration' help and it does not work.

Ask your less than helpful provider for the server settings and setup the new account up manually.
You want to know IMAP or POP and the name of the server. The port number and if it uses SSL/TLS security.
You need the same info for the SMTP server for outbound mail.

HT1918 I have the first iPod touch and still have credit on it but can't use it because when I try to it tells me I have to inter a credit crd number ..how do u change this..HELP!!

I have the first iPod touch and had used a credit card to bye music and now when I bye a iTunes card it tells me I need to update my card info...how do I change this...HELP!!!

iOS: Unable to update or restore

IPhoto does not open back-up library and requests library manager which does not work either

Hello,
I have a problem and NO idea how to fix it. I try to write it in bullet points to make it easier to read:
- My MacbookPro (from 2009) with current software (mavericks, all updates) went offline due to lack of battery while I was working in iPhoto
- When I rebooted the Mac, iPhoto said that the library is damaged and should be repaired
- The "repaired" version had lost tons of organizing elements (e.g. the order of the pictures and so on) so I used my time machine and took a back-up of the library from 1 hour ago
- The back-up library was copied successfully in the according file (user-pictures) after I deleted the current one
- When I wanted to open iPhoto now it requested to use the library manager as the version of the pictures are "old"
- I downloaded the library manager and tried to use it, however, this tool explains me now that the pictures were used with a newer version of iPhoto so I shall open iPhoto instead
- Again, when I then try to opne iPhoto, it requests the library manager and so on
So, I am not able to get access to my pictures again, although the library in the folder seems to be of correct size (around 55 GB). Does anyone have any idea how to fix that problem?
Many thanks in advance!!!
Johannes

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Macbook Pro suddenly turned off when fully charged and won't restart. Charger not working either coincidently

My 2 year old 13" MacbookPro suddenly turned off, presumably when the screen automatically dimmed (or went to sleep?) and now it won't turn back on. It was at 96% charge and now when I use the battery checker on the side, nothing shows up. No lights or anything. The charger doesn't seem to work either even after trying it on different outlets. This has never happened before but it has been harder to wake it from sleep in the last 6 months or so. I would have to push the On/Off button for a sec and the screen would turn back on. Also when I turn it on, the password screen is sometimes off-centered..weird.
I'm using Yosemite, the latest version..not sure what it is and can't check right now...I had to go use a PC to ask this question >_<

Try a SMC reset:
http://support.apple.com/en-us/HT201295
If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao

The redemption code they sent me in an email does not work...it says it is not active and to contact the store i purchased it from? Adobe is the one who sent this to me and i cannot get in touch with anyone. Very frustrated

Does anyone have any suggestions?

Photomum2014 did you purchase a redemption code though http://www.adobe.com/?
I would recommend reviewing Redemption Code Help. If you continue to experience difficulties then please contact our support team at http://adobe.ly/1aYjbSC.

TS3899 i have followed info re not being able to set up an email account plus trouble shooting tips and still cant get email account to work

I have tried to set up a hotmail email account on phone but it keeps saying cant verify and then says password I'm entering is incorrect. I know its correct password as I have reset it via PC... any ideas please?

You might want to try removing they email account and setting it back up again

I cannot past with the lastest version. CTRL V does not work either

I cannot past with the the most recent version released today. CTRL V does not work either
== This happened ==
Every time Firefox opened
== When my system updated the newest version today

Issues with the right-click context menu not working can be caused by the [http://toolbar.yahoo.com/ Yahoo Toolbar] (Tools > Add-ons > Extensions)
See:
[[Troubleshooting extensions and themes]]
http://support.mozilla.com/en-US/forum/1/380010
https://support.mozilla.com/en-US/forum/1/552540?
https://support.mozilla.com/en-US/forum/1/472971
Also see:
https://support.mozilla.com/en-US/kb/Clipboard+not+working
http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings
http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. ~~red:1.5.0_02 (very old)~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, '''but''' do look at the two bulleted items at the bottom "'''NOTE for IE:'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

There is any way to speed up the shipment Dispatched?! I had been order it in the first of Oct. and the planing for shipment time announce to be between 3 to 4 Weeks Delivers 24 Oct, 2012 - 30 Oct, 2012

There is any way to speed up the shipment Dispatched?! I had placing in order in the first of Oct. and the planing for shipment time announce to be between 3 to 4 Weeks Delivers 24 Oct, 2012 - 30 Oct, 2012

No

TS1139 I'm trying to process my first iPhoto order and I can't get past the fact it won't accept my telephone number. Thinking this may be a format glitch, I have tried to get around this but no success. Any suggestions? Yours in frustration:( CW

I'm trying to process my first iPhoto order and I can't get past the fact it won't accept my telephone number. Thinking this may be a format glitch, I have tried to get around this by spacing but no success. I live in Australia and the prefix is +61. Any suggestions welcome? Yours in frustration:( CW

Experiment - or search these forums - someone discovered a solution and it was a format issue
The US format for phone numbers is 10 digits AAA-PPP-NNNN - you do not include the 01+ here typically - maybe if you can out your digites in that format it will work
Hopefully someone from down under will tell how they do it
LN

I just purchased survivor season 11 to watch on my iphone4. I synced the first 4 episodes and I get an error message that episode 2 can not be played in my iphone4? How do I get it to play on my iPhone 4?

I just purchased survivor season 11 to watch on my iphone4. I synced the first 4 episodes and I get an error message that episode 2 can not be played in my iphone4? How do I get it to play on my iPhone 4?

In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
* http://www.nexusmods.com/skyrim/mods/modmanager/
In case of problems with this third-party program, please refer to its support forum:
* http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat

Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are

Vendor batch No. : Transaction ZJPMPU322
(Background)
There are "vendor batch" and "batch" fields in Goods-in-order and Goods-in-plan lists (transaction ZJPMPU322). Values for these fields are retrieved from inbound delivery document (transaction VL33N). After core 7.0 upgrade, "vendor batch" is not copied from "batch" in inbound delivery document any more so that nothing appears in the vendor batch field in the lists.
(Change request)
Values in "vendor batch" in the Goods-in-order and Goods-in-plan lists are retrieved from "batch" in inbound delivery document ONLY IF "vendor batch" is blank in the inbound delivery document.
(Current design)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN
(If there is no record in LIPS, blank will be printed out for both fields)
(After change)
Batch is retrieved from LIPS-CHARG
Vendor batch is retrieved from LIPS-LICHN only if LIPS-LICHN is not blank.
If LIPS-LICHN is blank, vendor batch is retrieved from LIPS-CHARG.
(If there is no record in LIPS, blank will be printed out for both fields. If both LIPS-CHARG and LIPS-LICHN are blank, blank will be printed out for both fields),
Following is the program:
REPORT zjpmrpu322 MESSAGE-ID zjpm001
 NO STANDARD PAGE HEADING
 LINE-COUNT 50
 LINE-SIZE 255.
*& Development ID: PU_DD_322_LJP *
*& Report : ZJPMRPU322 *
*& The Purpose of this program is to print the Goods-in-order list *
*& and the Goods in plan list for raw materials, materials purchase *
*& etc at the Sasayama plant, Japan. *
*& Change Log: *
*& Init Who Date Text *
*& PV P V R S Varma 07-May-2003 Initial Version *
*& DU D.Usui 2004/02/26 CR No. 1432 *
*& DU D.Usui 2004/03/08 CR No. 1447 *
*& DU D.Usui 2004/05/06 CR No. 1591 *
 Constants
CONSTANTS:
c_werks LIKE ekpo-werks VALUE 'JP01', "Plant code - Sasayama plant
c_id LIKE thead-tdid VALUE 'F02', "Text ID for Info record
c_object LIKE thead-tdobject VALUE 'EKPO',"Object of text for info rec
*c_zzjp_r1 LIKE marc-zzjp_re1 VALUE 'GMP', "Goods in plan- Domestic
*c_zzjp_r2 LIKE marc-zzjp_re1 VALUE 'GMPI', "Import sales order document
c_plus TYPE c VALUE '', "Holding '' sign
c_spras LIKE makt-spras VALUE 'J', "Language key Japan
*c_device(7) type c value 'PRINTER', "Device type
c_form(16) TYPE c VALUE 'ZJPMPU305', "Form name
c_ele_gmp(4) TYPE c VALUE 'GMP', "GMP Text element
c_ele_gmpi(4) TYPE c VALUE 'GMPI', "GMPI Text element
add begin CR1432
c_ele_bgmp(4) TYPE c VALUE 'BGMP', "BGMP
c_ele_bgmpi(5) TYPE c VALUE 'BGMPI', "BGMPI
add end CR1432
c_function(3) TYPE c VALUE 'SET', "Function
c_type(4) TYPE c VALUE 'BODY', "Window area in main window
c_win_head(7) TYPE c VALUE 'HEADING', "Heading window
c_win_shead(7) TYPE c VALUE 'SUBHEAD', "sub heading window
c_win_fot1(7) TYPE c VALUE 'FOOTER1', "Footer 1 window
c_win_main(4) TYPE c VALUE 'MAIN', "Main window
c_comd(8) TYPE c VALUE 'NEW-PAGE', "New-page command
c_zar TYPE ekko-bsart VALUE 'ZAR',
c_x TYPE c VALUE 'X', "Indicator for print options
c_f TYPE c VALUE 'F', "Indicator for Purchase Order
add begin CR1591
Deletion indicator in purchasing document
c_loekz(1) TYPE c VALUE 'L',
For ranges tables
c_sign_i(1) TYPE c VALUE 'I', "Sign(include)
c_op_eq(2) TYPE c VALUE 'EQ', "Option(=)
Confirmation category
c_ebtyp_ab(2) TYPE c VALUE 'AB', "Order acknowledgment
add end CR1591
c_la(2) TYPE c VALUE 'LA'. "Indicator for Inbound deliver
 Database Tables
 Vaiables / Internal tables *
Internal table to store PO information
Not used after CR1591
DATA: BEGIN OF t_purc OCCURS 0,
 ebeln LIKE eket-ebeln, "Purchasing Document Number
 ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
 eindt LIKE eket-eindt, "Item delivery date
 menge LIKE eket-menge, "Scheduled quantity
 charg LIKE eket-charg, "Batch number
 matnr LIKE ekpo-matnr, "Material code
 werks LIKE ekpo-werks, "Plant
 meins LIKE ekpo-meins, "Unit of measure
 lifnr LIKE ekko-lifnr, "Vendor number
 END OF t_purc.
Internal table to store material description.
DATA: BEGIN OF t_makt OCCURS 0,
 matnr LIKE makt-matnr, "Material code
 maktx LIKE makt-maktx, "Material description
 END OF t_makt.
Internal table for storage of final EKET data
DATA: BEGIN OF t_eket OCCURS 0,
 ebeln LIKE eket-ebeln, "Purchasing Document Number
 ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
 ebelp_ex(6) TYPE n, "Extended ebelp with length 6
 eindt LIKE eket-eindt, "Item delivery date
 menge LIKE eket-menge, "Scheduled quantity
 dabmg LIKE ekes-dabmg, " Delivered Quantity
 charg LIKE eket-charg, "Batch number
 matnr LIKE ekpo-matnr, "Material code
 werks LIKE ekpo-werks, "Plant
 maktx LIKE makt-maktx, "Material Description-- jp check
 etens LIKE ekes-etens, "Sequence Number
 meins LIKE ekpo-meins, "Unit of measure
 lifnr LIKE ekko-lifnr, "Vendor number
 vbeln LIKE ekes-vbeln,
 vbelp LIKE ekes-vbelp,
 vpnam(40) TYPE c, "Vendor product name
 END OF t_eket.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes OCCURS 0,
 ebeln LIKE ekes-ebeln, "Purchasing Document Number
 ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
 etens LIKE ekes-etens, "Sequence No
 eindt LIKE ekes-eindt, "Item delivery date
 menge LIKE ekes-menge, "Scheduled Quantity
 dabmg LIKE ekes-dabmg, " delivered quantity
 vbeln LIKE ekes-vbeln,
 vbelp LIKE ekes-vbelp,
 mark TYPE c,
 END OF t_ekes.
Internal table for extraction of data from EKES
Not used after CR1591
DATA: BEGIN OF t_ekes_temp OCCURS 0,
 ebeln LIKE ekes-ebeln, "Purchasing Document Number
 ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
 etens LIKE ekes-etens, "Sequence No
 eindt LIKE ekes-eindt, "Item delivery date
 menge LIKE ekes-menge, "Scheduled Quantity
 END OF t_ekes_temp.
Internal table for storing data from MLGN table.
DATA: BEGIN OF t_mlgn OCCURS 0,
 matnr LIKE mlgn-matnr, "material code
 lhmg1 LIKE mlgn-lhmg1, "Standard pallet size
 lhme1 LIKE mlgn-lhme1, "Unit of measure
 lety1 LIKE mlgn-lety1, "tower
 ltkze LIKE mlgn-ltkze, "Storage location
 END OF t_mlgn.
Internal table for storing data from MARM table.
DATA: BEGIN OF t_marm OCCURS 0,
 matnr LIKE marm-matnr, "material code
 umrez LIKE marc-zzjp_cas_size, "Std package unit
 meins LIKE ekpo-meins, "alternate unit
 END OF t_marm.
Internal table for storing data from MARC table.
DATA: BEGIN OF t_marc OCCURS 0,
 matnr LIKE marc-matnr, "Material code
 zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
 zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
 zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
 zzjp_re1 LIKE marc-zzjp_re1, "Heading
 END OF t_marc.
Internal table for storing data from lfa1 table.
DATA: BEGIN OF t_lfa1 OCCURS 0,
 lifnr LIKE lfa1-lifnr, "Vendor code
 name1 LIKE lfa1-name1, "Vendor name
 END OF t_lfa1.
Internal table for Storing data from LIPS table.
DATA: BEGIN OF t_lips OCCURS 0,
 vbeln LIKE lips-vbeln, "Delivery document no
 posnr LIKE lips-posnr, "Item number for Delivery document
 charg LIKE lips-charg, "Batch number
 lichn LIKE lips-lichn, "Vendor Batch number
 END OF t_lips.
Internal table for storing the final display data.
DATA: BEGIN OF t_display OCCURS 0,
 g_checkbox type c, "check box for selection of records
 ebeln LIKE ekes-ebeln, "Purchasing Document Number
 ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
 etens LIKE ekes-etens, "Sequence No
 eindt LIKE eket-eindt, "Item delivery date
 menge LIKE eket-menge, "Scheduled Quantity
 vpnam(40) TYPE c, "Vendor product name
 lifnr LIKE ekko-lifnr, "Vendor code
 name1 LIKE lfa1-name1, "Vendor name
 meins LIKE ekpo-meins, "Unit of measure
 matnr LIKE ekpo-matnr, "Material Number
 maktx LIKE makt-maktx, "Material Description-- jp check
 charg LIKE lips-charg, "Batch number
 lichn LIKE lips-lichn, "Vendor Batch number
 lhmg1 LIKE mlgn-lhmg1, "standard pallet size
 lhme1 LIKE mlgn-lhme1, "Unit of standard pallet
 lety1 LIKE mlgn-lety1, "tower
 ltkze LIKE mlgn-ltkze, "Storage location
 umrez LIKE marc-zzjp_cas_size, "Std package unit
 meinh LIKE ekpo-meins, "alternate unit
 zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
 zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
 zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
 zzjp_re1 LIKE marc-zzjp_re1, "Heading
 std_pac_no(13) TYPE n, "Std receipt package no
 tot_std_pt(13) TYPE n, "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
 vbeln like ekes-vbeln, "Goods-in-order
 vbelp like ekes-vbelp, "Item
add end CR1447
 END OF t_display.
Internal table for storing the final display data -Goods in order list
DATA: BEGIN OF t_display1 OCCURS 0,
 ebeln LIKE ekes-ebeln, "Purchasing Document Number
 ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
 etens LIKE ekes-etens, "Sequence No
 eindt LIKE eket-eindt, "Item delivery date
 menge LIKE eket-menge, "Scheduled Quantity
 vpnam(40) TYPE c, "Vendor product name
 lifnr LIKE ekko-lifnr, "Vendor code
 name1 LIKE lfa1-name1, "Vendor name
 meins LIKE ekpo-meins, "Unit of measure
 matnr LIKE ekpo-matnr, "Material Number
 maktx LIKE makt-maktx, "Material Description-- jp check
 charg LIKE lips-charg, "Batch number
 lichn LIKE lips-lichn, "Vendor Batch number
 lhmg1 LIKE mlgn-lhmg1, "standard pallet size
 lhme1 LIKE mlgn-lhme1, "Unit of standard pallet
 lety1 LIKE mlgn-lety1, "tower
 ltkze LIKE mlgn-ltkze, "Storage location
 umrez LIKE marc-zzjp_cas_size, "Std package unit
 meinh LIKE ekpo-meins, "alternate unit
 zzjp_nyu_sop LIKE marc-zzjp_nyu_sop, "Product Std number
 zzjp_dos_frm LIKE marc-zzjp_dos_frm, "Dosage form
 zzjp_aprn LIKE marc-zzjp_aprn, "Apperance
 zzjp_re1 LIKE marc-zzjp_re1, "Heading
 std_pac_no(13) TYPE n, "Std receipt package no
 tot_std_pt(13) TYPE n, "Total no of std pallets
 END OF t_display1.
Internal table for storing the final display data - Goods in plan list
DATA: BEGIN OF t_display2 OCCURS 0,
 ebeln LIKE ekes-ebeln, "Purchasing Document Number
 ebelp LIKE ekes-ebelp, "Item Number of Purchasing Document
 etens LIKE ekes-etens, "Sequence No
 eindt LIKE eket-eindt, "Item delivery date
 menge LIKE eket-menge, "Scheduled Quantity
 name1 LIKE lfa1-name1, "Vendor name
 meins LIKE ekpo-meins, "Unit of measure
 matnr LIKE ekpo-matnr, "Material Number
 maktx LIKE makt-maktx, "Material Description-- jp check
 charg LIKE lips-charg, "Batch number
 lichn LIKE lips-lichn, "Vendor Batch number
 lhmg1 LIKE mlgn-lhmg1, "standard pallet size
 lety1 LIKE mlgn-lety1, "tower
 ltkze LIKE mlgn-ltkze, "Storage location
 tot_std_pt(13) TYPE n, "Total no of std pallets
add begin CR1447
Add new field 'Goods-in-order','Item' for goods in plan list
 vbeln like ekes-vbeln, "Goods-in-order
 vbelp like ekes-vbelp, "Item
add end CR1447
 END OF t_display2.
add begin CR1591
RANGES: r_matnr FOR mara-matnr, "for p_matnr
 r_ebeln FOR ekpo-ebeln. "for p_ebeln
add end CR1591
DATA: line TYPE i. " line number
DATA: g_checkbox TYPE c. "check box for selection of records
DATA: g_tab LIKE sy-index. "variable to hold index
DATA g_tabix LIKE sy-tabix. "holder for table index
Printing Options.
DATA: lw_pr_options LIKE itcpo.
*lw_pr_options-tddest = 'SA03'. " Print Device Name
lw_pr_options-tdpreview = 'X'. " Print Preview
lw_pr_options-tdnewid = 'X'. " New Request
lw_pr_options-tdlifetime = 2. " Retention in Spool
 Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
SELECT-OPTIONS:
s_date FOR sy-datum DEFAULT sy-datum. " Search period.
PARAMETERS:
p_matnr LIKE mara-matnr, " Material code
p_ebeln LIKE ekpo-ebeln. " Purchase Document No
SELECTION-SCREEN END OF BLOCK blk1.
 Selection Screen Checks *
AT SELECTION-SCREEN.
IF ( s_date-low IS INITIAL ) AND
 ( p_matnr IS INITIAL ) AND
 ( p_ebeln IS INITIAL ).
 MESSAGE e000 WITH 'Entry Must in atleast one of the Fields'(t00).
ENDIF.
IF ( NOT p_matnr IS INITIAL ) AND
 ( s_date IS INITIAL ) AND
 ( p_ebeln IS INITIAL ).
 MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del begin CR1591
This check is not found in original FS
IF ( NOT p_matnr IS INITIAL ) AND
 ( s_date IS INITIAL ) AND
 ( NOT p_ebeln IS INITIAL ).
 MESSAGE e000 WITH 'Date should also be Entered'(t01).
ENDIF.
del end CR1591
 Validations for Data selection *
del begin CR1591
Waste check
IF ( NOT s_date IS INITIAL ) AND
 ( p_matnr IS INITIAL ) AND
 ( p_ebeln IS INITIAL ).
 PERFORM f_check_date_in_eket.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
 ( NOT p_matnr IS INITIAL ) AND
 ( p_ebeln IS INITIAL ).
 PERFORM f_check_matnr_in_plant.
 PERFORM f_check_matnr_in_ekpo.
 PERFORM f_check_date_in_eket.
 PERFORM f_check_matnr_in_plant.
 PERFORM f_check_matnr_in_ekpo.
ENDIF.
IF ( NOT s_date IS INITIAL ) AND
 ( NOT p_matnr IS INITIAL ) AND
 ( NOT p_ebeln IS INITIAL ).
 PERFORM f_check_matnr_in_plant.
 PERFORM f_check_matnr_in_ekpo.
 PERFORM f_check_date_in_eket.
 PERFORM f_check_ebeln_in_ekpo.
 PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
 ( NOT s_date IS INITIAL ) AND
 ( p_matnr IS INITIAL ).
 PERFORM f_check_date_in_eket.
 PERFORM f_check_ebeln_in_ekpo.
 PERFORM f_check_werks_in_ekpo.
ENDIF.
IF ( NOT p_ebeln IS INITIAL ) AND
 ( s_date IS INITIAL ) AND
 ( p_matnr IS INITIAL ).
 PERFORM f_check_ebeln_in_ekpo.
 PERFORM f_check_werks_in_ekpo.
ENDIF.
del end CR1591
 Data selection from Tables *
START-OF-SELECTION.
SET PF-STATUS 'SELECT'.
add begin CR1591
Set ranges tables
PERFORM set_ranges.
add end CR1591
mod begin CR1591
**Selection of PO data from EKET into internal table t_purc.
PERFORM f_select_eket.
**Selection of corresponding PO data for EKET from EKES into t_ekes.
PERFORM f_select_ekes.
**Selection of material desc from MAKT table into T_makt.
PERFORM f_select_makt.
**Copy the contents of t_purc and t_makt into t_eket table.
PERFORM f_move_eket.
**Replace the corresponding entries of t_eket with t_ekes.
PERFORM f_update_eket.
Selection of PO data from EKET into internal table T_EKET.
PERFORM f_select_eket2.
Selection of corresponding PO data from EKES appending to T_EKET.
PERFORM f_select_ekes2.
Selection of material desc from MAKT table into T_MAKT.
PERFORM f_select_makt2.
mod end CR1591
*Selection of vendor product name.
PERFORM f_select_vpnam.
del begin CR1591
No need
**copy t_eket-ebelp into temporary variable.
PERFORM f_copy_ebelp.
del end CR1591
*selection of data from MLGN table into t_mlgn internal table
PERFORM f_select_mlgn.
*selection of data from marm table into t_marm internal table
PERFORM f_select_marm.
*selection of data from marc table into t_marc internal table
PERFORM f_select_marc.
*selection of data from lfa1 table into t_lfa1 internal table
PERFORM f_select_lfa1.
*Selection of data from LIPS table into t_lips internal table
PERFORM f_select_lips.
del begin CR1591
Don't display list screen when no data exists
*END-OF-SELECTION.
del end CR1591
*lines = sy-linno - 1.
*Collection of data into the final display internal table t_Display
PERFORM f_collect_final.
*Display the contents of t_display as a simple List
PERFORM f_list_display.
AT USER-COMMAND.
PERFORM f_select_layout.
INCLUDE zjpmipu315.
INCLUDE zjpmipu316.
*& Form f_check_MATNR_in_plant
 This Routine is to check if the the selected material code is
 available in the plant 'JP01'.
FORM f_check_matnr_in_plant.
DATA: l_matnr LIKE mara-matnr.
SELECT matnr UP TO 1 ROWS FROM marc
 INTO l_matnr
 WHERE
 matnr = p_matnr AND
 werks = c_werks.
ENDSELECT.
IF l_matnr IS INITIAL.
 MESSAGE e000 WITH
 'The material is not available in '(t02) c_werks 'plant'(t20).
ENDIF.
ENDFORM. " f_check_MATNR_in_plant
*& Form f_check_EBELN_in_EKPO
 This Routine is to check if the Purchase order number selected
 is existing or not and if it exists, check if it is related to
 the plant 'JP01'.
FORM f_check_ebeln_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
 INTO l_ebeln
 WHERE
 ebeln = p_ebeln AND
 werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
 MESSAGE e000 WITH
 'PO not available or not related to '(t03) c_werks 'plant'(t21).
ENDIF.
ENDFORM. " f_check_EBELN_in_EKPO
*& Form f_check_matnr_in_ekko
 This routine is to check if any PO exist for the selected
 Material code.
FORM f_check_matnr_in_ekpo.
DATA: l_matnr LIKE ekpo-matnr.
SELECT matnr UP TO 1 ROWS FROM ekpo
 INTO l_matnr
 WHERE
 matnr = p_matnr.
ENDSELECT.
IF l_matnr IS INITIAL.
 MESSAGE e000 WITH
 'PO does not exist for the material no'(t04) p_matnr.
ENDIF.
ENDFORM. " f_check_matnr_in_ekpo
*& Form f_check_date_in_eket
 This routine is to check if any purchase order exists
 with the selected
FORM f_check_date_in_eket.
DATA: l_eindt LIKE eket-eindt.
SELECT eindt UP TO 1 ROWS FROM eket
 INTO l_eindt
 WHERE
 eindt IN s_date.
ENDSELECT.
IF l_eindt IS INITIAL.
 MESSAGE e000 WITH
 'No PO exist with the selected delivery date '(t05).
ENDIF.
ENDFORM. " f_check_date_in_eket
*& Form f_check_werks_in_ekpo
 This Routine is to check if the selected purchase order
 is associated with the plant JP01
FORM f_check_werks_in_ekpo.
DATA: l_ebeln LIKE ekpo-ebeln.
SELECT ebeln UP TO 1 ROWS FROM ekpo
 INTO l_ebeln
 WHERE
 werks = c_werks.
ENDSELECT.
IF l_ebeln IS INITIAL.
 MESSAGE e000 WITH
 'The selected P0 is not relevant to '(t06) c_werks 'plant'(t22).
ENDIF.
ENDFORM. " f_check_werks_in_ekpo
*& Form f_select_eket
 Routine to collect data from EKET, EKPO, MAKT, EKKO tables
 using inner join and store the data into internal table
 t_PURC. The data selection is based on the selection screen's
 input.
FORM f_select_eket.
IF ( NOT s_date-low IS INITIAL ) AND
 ( p_matnr IS INITIAL ) AND
 ( p_ebeln IS INITIAL ).
 SELECT
 eket~ebeln
 eket~ebelp
 eket~eindt
 eket~menge
 eket~charg
 ekpo~matnr
 ekpo~werks
 ekpo~meins
 ekko~lifnr
 INTO TABLE t_purc
 FROM
 ( ( eket INNER JOIN ekko ON
 eketebeln = ekkoebeln ) INNER JOIN ekpo ON
 eketebelp = ekpoebelp AND
 ekpoebeln = ekkoebeln )
WHERE
 eket~eindt IN s_date AND
 ekpo~werks = c_werks AND
 ekpo~elikz NE c_x AND
 ekko~bstyp EQ c_f AND
 ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
 ( NOT p_matnr IS INITIAL ) AND
 ( p_ebeln IS INITIAL ).
 SELECT
 eket~ebeln
 eket~ebelp
 eket~eindt
 eket~menge
 eket~charg
 ekpo~matnr
 ekpo~werks
 ekpo~meins
 ekko~lifnr
 INTO TABLE t_purc
 FROM
 ( ( eket INNER JOIN ekko ON
 eketebeln = ekkoebeln ) INNER JOIN ekpo ON
 eketebelp = ekpoebelp AND
 ekpoebeln = ekkoebeln )
WHERE
 eket~eindt IN s_date AND
 ekpo~matnr = p_matnr AND
 ekpo~werks = c_werks AND
 ekpo~elikz NE c_x AND
 ekko~bstyp EQ c_f AND
 ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
 ( NOT p_matnr IS INITIAL ) AND
 ( NOT p_ebeln IS INITIAL ).
 SELECT
 eket~ebeln
 eket~ebelp
 eket~eindt
 eket~menge
 eket~charg
 ekpo~matnr
 ekpo~werks
 ekpo~meins
 ekko~lifnr
 INTO TABLE t_purc
 FROM
 ( ( eket INNER JOIN ekko ON
 eketebeln = ekkoebeln ) INNER JOIN ekpo ON
 eketebelp = ekpoebelp AND
 ekpoebeln = ekkoebeln )
WHERE
 eket~eindt IN s_date AND
 ekpo~matnr = p_matnr AND
 ekpo~ebeln = p_ebeln AND
 ekpo~werks = c_werks AND
 ekpo~elikz NE c_x AND
 ekko~bstyp EQ c_f AND
 ekko~bsart NE c_zar.
ELSEIF ( s_date-low IS INITIAL ) AND
 ( p_matnr IS INITIAL ) AND
 ( NOT p_ebeln IS INITIAL ).
 SELECT
 eket~ebeln
 eket~ebelp
 eket~eindt
 eket~menge
 eket~charg
 ekpo~matnr
 ekpo~werks
 ekpo~meins
 ekko~lifnr
 INTO TABLE t_purc
 FROM
 ( ( eket INNER JOIN ekko ON
 eketebeln = ekkoebeln ) INNER JOIN ekpo ON
 eketebelp = ekpoebelp AND
 ekpoebeln = ekkoebeln )
WHERE
 ekpo~ebeln = p_ebeln AND
 ekpo~werks = c_werks AND
 ekpo~elikz NE c_x AND
 ekko~bstyp EQ c_f AND
 ekko~bsart NE c_zar.
ELSEIF ( NOT s_date-low IS INITIAL ) AND
 ( p_matnr IS INITIAL ) AND
 ( NOT p_ebeln IS INITIAL ).
 SELECT
 eket~ebeln
 eket~ebelp
 eket~eindt
 eket~menge
 eket~charg
 ekpo~matnr
 ekpo~werks
 ekpo~meins
 ekko~lifnr
 INTO TABLE t_purc
 FROM
 ( ( eket INNER JOIN ekko ON
 eketebeln = ekkoebeln ) INNER JOIN ekpo ON
 eketebelp = ekpoebelp AND
 ekpoebeln = ekkoebeln )
WHERE
 eket~eindt IN s_date AND
 ekpo~ebeln = p_ebeln AND
 ekpo~werks = c_werks AND
 ekpo~elikz NE c_x AND
 ekko~bstyp EQ c_f AND
 ekko~bsart NE c_zar.
ENDIF.
IF sy-subrc <> 0.
 MESSAGE s000 WITH 'Data not found'(t07).
 LEAVE LIST-PROCESSING.
ELSE.
SORT t_purc.
ENDIF.
ENDFORM. " f_select_eket
*& Form f_select_makt
 Routine to select the material description for all the
 materials present in T_purc table
FORM f_select_makt.
DATA: l_t_makt(4) TYPE c VALUE 'MAKT'.
SELECT
 matnr
 maktx
FROM
 makt
INTO TABLE t_makt
 FOR ALL ENTRIES IN t_purc
WHERE
 matnr = t_purc-matnr AND
 spras = c_spras.
IF sy-subrc <> 0.
 MESSAGE s000 WITH
 'Relevant data not found in'(t09) l_t_makt 'table'(t23).
ELSE.
 SORT t_makt.
ENDIF.
ENDFORM. " f_select_makt
*& Form f_move_eket
 Routine to join data in T_PURC and T_MAKT tables into
 internal table T_MAKT.
FORM f_move_eket.
LOOP AT t_purc.
 t_eket-ebeln = t_purc-ebeln.
 t_eket-ebelp = t_purc-ebelp.
 t_eket-eindt = t_purc-eindt.
 t_eket-menge = t_purc-menge.
 t_eket-charg = t_purc-charg.
 t_eket-matnr = t_purc-matnr.
 t_eket-werks = t_purc-werks.
 t_eket-meins = t_purc-meins.
 t_eket-lifnr = t_purc-lifnr.
 READ TABLE t_makt WITH KEY matnr = t_purc-matnr
 BINARY SEARCH.
 IF sy-subrc = 0.
 t_eket-maktx = t_makt-maktx.
 ENDIF.
 APPEND t_eket.
 CLEAR t_eket.
ENDLOOP.
ENDFORM. " f_move_eket
*& Form f_select_ekes
 Routine to select EKES data for all corresponding entries
 of T_EKET.
FORM f_select_ekes.
DATA: l_tabix TYPE i.
IF NOT s_date IS INITIAL.
 SELECT
 ebeln
 ebelp
 etens
 eindt
 menge
 INTO TABLE t_ekes
 FROM
 ekes
 WHERE
 eindt IN s_date.
ELSE.
DESCRIBE TABLE t_purc LINES l_tabix.
IF l_tabix GT 0.
 SELECT
 ebeln
 ebelp
 etens
 eindt
 menge
 dabmg
 vbeln
 vbelp
 FROM
 ekes
 INTO TABLE t_ekes
 FOR ALL ENTRIES IN t_eket
 FOR ALL ENTRIES IN t_purc
 WHERE
 ebeln = t_purc-ebeln AND
 ebelp = t_purc-ebelp AND
 eindt IN s_date.
 AND ebeln eq p_ebeln.
 and matnr in p_matnr.
ENDIF.
CLEAR l_tabix.
IF NOT s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
 SELECT
 ekes~ebeln
 ekes~ebelp
 ekes~etens
 ekes~eindt
 ekes~menge
 ekes~dabmg
 APPENDING TABLE t_ekes
 FROM ekes
 WHERE
 eindt IN s_date AND
 ebeln EQ p_ebeln AND
 ebtyp EQ c_la.
ELSEIF NOT s_date IS INITIAL AND p_ebeln IS INITIAL.
 SELECT
 ekes~ebeln
 ekes~ebelp
 ekes~etens
 ekes~eindt
 ekes~menge
 ekes~dabmg
 APPENDING TABLE t_ekes
 FROM ekes
 WHERE
 eindt IN s_date AND
 ebeln EQ p_ebeln AND
 ebtyp EQ c_la.
ELSEIF s_date IS INITIAL AND NOT p_ebeln IS INITIAL.
 SELECT
 ekes~ebeln
 ekes~ebelp
 ekes~etens
 ekes~eindt
 ekes~menge
 ekes~dabmg
 APPENDING TABLE t_ekes
 FROM ekes
 WHERE
 eindt IN s_date AND
 ebeln EQ p_ebeln AND
 ebtyp EQ c_la.
ENDIF.
IF sy-subrc = 0.
 SORT t_ekes.
ENDIF.
IF NOT t_ekes[] IS INITIAL.
 t_ekes_temp[] = t_ekes[].
 SORT t_ekes_temp BY ebeln ebelp.
 DELETE ADJACENT DUPLICATES FROM t_ekes_temp COMPARING ebeln ebelp.
 LOOP AT t_ekes_temp.
 READ TABLE t_purc WITH KEY ebeln = t_ekes_temp-ebeln
 ebelp = t_ekes_temp-ebelp.
 IF sy-subrc NE 0.
 CLEAR t_purc.
 SELECT SINGLE
 eket~ebeln
 eket~ebelp
 eket~eindt
 eket~menge
 eket~charg
 ekpo~matnr
 ekpo~werks
 ekpo~meins
 ekko~lifnr
 INTO CORRESPONDING FIELDS OF t_purc
 FROM
 ( ( eket INNER JOIN ekko ON
 eketebeln = ekkoebeln ) INNER JOIN ekpo ON
 eketebelp = ekpoebelp AND
 ekpoebeln = ekkoebeln )
 WHERE
 eket~ebeln = t_ekes_temp-ebeln
 AND eket~ebelp = t_ekes_temp-ebelp
 AND ekpo~elikz NE c_x
 AND ekko~bstyp EQ c_f
 AND ekko~bsart NE c_zar.
 IF sy-subrc EQ 0.
 APPEND t_purc.
 CLEAR t_purc.
 ENDIF.
 ENDIF.
 ENDLOOP.
ENDIF.
REFRESH: t_ekes_temp, t_ekes.
CLEAR: t_ekes_temp, t_ekes.
Once the header is filled up get the details from EKES
SELECT ebeln ebelp etens eindt menge dabmg vbeln vbelp
 INTO TABLE t_ekes
 FROM ekes
 FOR ALL ENTRIES IN t_purc
 WHERE ebeln EQ t_purc-ebeln.
Mark the entries as 'X' which falls in the date range
LOOP AT t_ekes.
 IF t_ekes-eindt IN s_date.
 t_ekes-mark = 'X'.
 MODIFY t_ekes INDEX sy-tabix TRANSPORTING mark.
 ENDIF.
ENDLOOP.
SORT t_ekes BY ebeln ebelp ASCENDING mark DESCENDING.
Delete the entries from eket if no entries in EKES falls in the period
LOOP AT t_purc.
 l_tabix = sy-tabix.
 READ TABLE t_ekes WITH KEY ebeln = t_purc-ebeln
 ebelp = t_purc-ebelp.
 IF sy-subrc EQ 0.
 IF t_ekes-mark NE 'X'.
 DELETE t_purc INDEX l_tabix.
 ENDIF.
 ENDIF.
ENDLOOP.
delete the entries from EKES which do not fall in the specified period
DELETE t_ekes WHERE mark NE 'X'.
ENDFORM. " f_select_ekes
*& Form f_update_eket
 Routine to substitute relevant t_eket entries with that of
 t_ekes entries.It does not modify the remaining entries for
 for which the corresponding values in t_ekes doesnot exist.
FORM f_update_eket.
DATA: BEGIN OF lt_temp_eket OCCURS 0,
 ebeln LIKE eket-ebeln, "Purchasing Document Number
 ebelp LIKE eket-ebelp, "Item Number of Purchasing Document
 eindt LIKE eket-eindt, "Item delivery date
 menge LIKE eket-menge, "Scheduled quantity
 dabmg LIKE ekes-dabmg, " Delivered quantity
 matnr LIKE ekpo-matnr, "Material code
 maktx LIKE makt-maktx, "Material Description-- jp check
 etens LIKE ekes-etens, "Sequence Number
 meins LIKE ekpo-meins, "Unit of measure
 lifnr LIKE ekko-lifnr, "Vendor number
 charg LIKE eket-charg, " Batch number Added by PD 08/08/03
 vbeln LIKE ekes-vbeln,
 vbelp LIKE ekes-vbelp,
 END OF lt_temp_eket,
 l_menge LIKE ekes-menge.
LOOP AT t_eket.
 LOOP AT t_ekes WHERE ebeln = t_eket-ebeln
 AND ebelp = t_eket-ebelp.
Added by PD 08/08/03
 MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
 MOVE t_eket-ebeln TO lt_temp_eket-ebeln.
 MOVE t_eket-ebelp TO lt_temp_eket-ebelp.
 MOVE t_eket-meins TO lt_temp_eket-meins.
 CLEAR l_menge.
 l_menge = t_ekes-menge - t_ekes-dabmg.
 IF l_menge LE 0.
 CONTINUE.
 ELSE.
 MOVE l_menge TO lt_temp_eket-menge.
 ENDIF.
 MOVE t_ekes-eindt TO lt_temp_eket-eindt.
 MOVE t_ekes-etens TO lt_temp_eket-etens.
 MOVE t_eket-lifnr TO lt_temp_eket-lifnr.
 MOVE t_eket-maktx TO lt_temp_eket-maktx.
 MOVE t_eket-matnr TO lt_temp_eket-matnr.
 MOVE t_ekes-vbeln TO lt_temp_eket-vbeln.
 MOVE t_ekes-vbelp TO lt_temp_eket-vbelp.
 APPEND lt_temp_eket.
 CLEAR lt_temp_eket.
 CLEAR t_ekes.
 ENDLOOP.
 IF sy-subrc NE 0.
Added by PD 08/08/03
 MOVE t_eket-charg TO lt_temp_eket-charg.
addition ends
 MOVE t_eket-ebeln

Dear
Problem No 1 : we are working in a process industries with three plants each of them have three order type. we have define MRP group in "OPPR" then assign each MRP group to Orde types in "OPPE". Now the problem is whn i convert plan order in process order for any material systme automaticaly pick the order type PIi01.
Answer :
1.Please check the OPPR -Plant and MRP group -Select Order Type Button -Check what Order Type you have assinged here ( PI01( May be the default Process Order Type )
2.If you are maintaing MRP group ( 0001 or 0002) , did you asisng the same in MRP1 view ?? because
3.Did you maintain the similar Order type in OPKP -Define Production Scheduling Profile ? -This has highest priority .
4.Did you maintain correct order type in OPJH-Maintain Order Type ??
Refer the expert comments on the same issue : Strategy group to define production order type
Problem No 2: 2nd Problem is system system is not creating plan order for prrevios dates. say i enter PIR for month of november from first november to 30th november and run MRP on 29th the sytem create plan order on 30th of november with exception message 30.
Answer : You can plan the order in back dated , if you maitain Satrt date in the Past optiuon in OPU3/OPU5-Define Scheduling parameters .Goto OPU3 -Select the Order Type -Double click -Maintain 90-60 days in the Start Date in the past in Scheduling Control and Details scheduling tab .
Hope it helps
regards
JH

TS1717 I just downloaded a song and it only plays the first 50 seconds and then moves to the next song in the list. How can I get it to play the rest of the song?

I just downloaded a song and it only plays the first 50 seconds and then moves to the next song in the list. How can I get it to play the rest of the song?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copy of the track and try redownloading a fresh one. See the following document for instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

I'm among the first 2300 orders, and still No shipping email? Status not working either

Similar Messages

Maybe you are looking for