I'm at the end of my rope with this thing!!

Just a quick overview,
I've had my 30G iPod for about 2 weeks now. At first I couldn't get iTunes to read the iPod and had all these other problems. Eventually, after trying all sorts of things, I would have to pull the cord out of the USB port because iTunes said there was no iPod connected, but the iPod read 'do not disconnect'. Grr..I've only done this about three times and I know it can damage it whatever, but I had no choice! Now, after I turn it off I always put it on hold, and when I'd later turn it back on again, usually it would automatically turn back on again, now it doesn't, I press any button like the booklet says to do to turn it on, but the apple icon always appears indicating its reset, it happens quite a lot, and when I turn it off, put it on hold, then take it off hold after its been reset, it turns on automatically like it should! However, I haven't had problems with iTunes lately, its all going smoothly, and so had my iPod, but only lately its been doing this freaky stuff!
Hopefully you guys can help me! I'm thinking about taking it back to the store.
Laura
Dell Windows XP

Even though you eject the IPOD from ITUnes it is still connected to windows. You have your IPOD set to run in disk mode and it has to be dismounted from the Windows Operating System correctly or you will lock it up eventually. Read this first:
Do Not Disconnect - http://docs.info.apple.com/article.html?artnum=61135
It may be an option to restore your IPOD to factory settings and reload all your stuff on to a clean IPOD drive. Read this:
Restoring IPOD to factory Settings - http://docs.info.apple.com/article.html?artnum=60983

Similar Messages

Please help find driver, at the end of my rope with this ca

I purchased a used soundcard from a computer repair shop near here a few months back. The sound card did not come with an installation CD. So i was pretty much left on my own to find drivers for it. Ive got a good many years experience building pcs so i figured this wouldnt be a problem. How WRONG i was lol. After being unable to find drivers for it originally I finally gave up and put the card in a static protection bag i had laying around and havent thought about it much since then just counted it as a loss. Now im back at it trying again to find drivers to get this card to work.
The following is every bit of information i feel applicable to this sittuation, however if anymore infos needed please let me know and ill try to provide it.
My operating system= windows XP with SP2
The following is off the card itself. (which says its a creative sound blaster Li've!)
Theres an inkstamp on the uppper left hand corner of the non chipset side that reads
32AMN08B 853
94v-0 k
(backwards RJ looking symbol)e9697 3999
Serial number= m48309402990
Model number= CT4830
Steps i've taken so far are i originally went to the creative search function and looked for the drivers on their site it gave me a link to two files which i downloaded.
This is the link where i downloaded the following files
http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+XP&region=&Product_Na me=Li've%2&Product_ID=4857&modelnumber=&driverlang =033&OS=0&drivertype=0&x=26&y=
And this of course is the two files i got.
. Li'veDrvPack_Patch.exe
2. Li'veDrvUni-Pack(ENG).exe
File number one has a warning as follows:
(This is an update patch, it is not a complete driver installation. You must have the previous Li'veDrvPack.exe (SBLW-XPWEB-W3-US), posted July 7,2002. in your system if you wish to use this patch.)
Ive searched the site i cant find this file (SBLW-XPWEB-W3-US) after searching through the forums a bit i found this thread http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=25677&vie w=by_date_ascending&page=
Which had lists of ISOs for all the different installation CDs. I downloaded everything i seen on filefront (http://hosted.filefront.com/BadBoyforum) badboy had posted that had LIVE in the name. These include the following ISOs.
. SB Audigy & Li've!.iso
2. SB Li've! 5. (SB0228).iso
3. SB Li've! 5. (SB0229).iso
4. SB Li've! 24bit.iso
I mounted each image in daemon tools and attempted to install and recieved the following error
ERROR= Setup could not detect any sound blaster audio card on your system. Please ensure that your sound blaster hardware is properly installed before running this setup program. Setup will now exit.
Im kindve at a loss as how to proceed. Ive tryed looking through driverguide.com and a few other generic driver sites without much luck. If anybody at all has any suggestions on this id be very appreciati've. Like i said its a used card so it could be an OEM but it appears to be an ODM but who knows im by no means an expert on all this. I may have missed one of the LIVE isos off that filefront site but i dont think so. The only one i see thats left is the external one and its an internal card so i dont see how that could be right.

shadowcage wrote:
okay well i tryed the patching method on all of the isos i had after extracting them.
I patched it and it said it was successful. when i ran each successi've setup it still didnt detect any soundblaster hardware.
I also went to compaq and tryed a driver i found there without any luck. Im thinking at this point it is an OEM
Although i still dont understand how you got compaq from the model number, im going to continue looking around their site.
Maybe ill luck out but so far im about to the point im ready to throw this @#$%@%#@$@##@$#@$% thing away lol.
Im looking on driver guide now again. :Sighs This is so aggrivating Normally i wouldnt have bought a card without the drivers but
my wifes the one that got it and she didnt know. Oh well......
You can get the model information from here.
You can also try by installing kX drivers -> if kX package don't get installed, your card may have some problems.
kX Home pages - http://kxproject.lugosoft.com/index.php?skip=
kX support forum - http://www.driverheaven.net/forumdisplay.php?f=74
jutapa

At the end of my rope with recent upgrade

I just bought the recent upgrade it's 2.0.1. Anyways before I bought it and updated my ipod everything worked perfect. My favorite thing to do was sit outside on the ipod surfing the net. Well now that I updated it I can not get online. I can connect to my wifi which works no problem as I am on a computer right now using wifi but I can not access the net, youtube, itunes anything at all. If I am lucky I can load apple.com or gmail.com but that is it. If I click on a link it will not load another page. I have googled like no tomorrow to fix this and nothing has worked. Here is what I have tried.
- Reset by holding down home and power
- Taking off all applications I had downloaded and doing a complete restore putting the ipod back to factory settings and then syncing minus the apps as the apps and the 2.0.1 is the only things new on my ipod.
- I have tried messing with the settings under the connection on the ipod as suggested in some sites I found.
- I have tried changing my secruity settings on the modem, unplugged modem and reset modem even though modem has nothing to do with it since I still get online on my computer.
- I have tried forgetting network and refinding it, I have also tried renewing it.
I am so fed up. I want whatever was on it before 2.0.1 back since I could get on the internet then. I bought the ipod back in december so support will do nothing for me if I called them.
Please Help!! I am ready to throw the thing out the window.

I understand that you are trying to help. I came to realize that it must be a sig or something that automatically attaches at the end as it is no longer in more of the thread it is always at the bottom of the thread. I am so fed up with this stupid thing. I have tried everything it seems and everything mentioned in this thread. I got the IPod beside me to try each new suggestion. I can't go to an apple store as we do not have one here. I am ready to call apple and force them to deal with this in the morning. I got enough on plate I don't need this added stress even as minor as it is in the big picture.

At the end of my rope with phone support.

I'm not sure what anyone here can do, but I need somplace to share this with. Its extremely frusturating.
Less than a month ago, I purchased my first iMac. It was a slightly older model- a 20" Aluminum 2.0ghz machine. It was purchased from a re-seller and had obviously been sitting on the shelf for a while. I know that the warranty date starts from the purchase date of the re-seller; there is a form to fill out if it needs to be changed to your actual purchase date. In a situation like mine, where the computer had been in the store for around a year, this was essential if I wanted any kind of phone support.
I filled out these forms, faxed a copy of the receipt to the number I was supposed to, and assumed everything would be fine. Within 24 hours, Boot Camp managed to screw up the OS X partition of my hard drive. I needed to make several calls to customer support, where I had to argue with all of them due to the purchase date update taking up to 72 hours to go through. After several phone calls, where I had to explain my situation 15 times and wait on hold for 45 minutes while they found out that it takes 72 hours for the change to go through, and after literally 5 hours of driving to my nearest Apple stores until someone was willing to help me with the problem even though I was "out of warranty" (Reminder- I had purchased this computer 2 days prior. New, off the shelf in the store. It absolutely should've been under warranty.) I was finally able to get the computer fixed.
Today, I figured I'd check on the status of my purchase date switch, so the next time something goes wrong with my computer I don't have to battle with tech support to get them to listen to my problem. I entered the serial number in the warranty info page, and it tells me:
*Our records indicate that your product is covered under a custom contract. For more information about your coverage, please contact us.*
*Your product is not eligible for complimentary phone support.*
When I click "contact us," the only thing that would be able to potentially help me out is the Apple Customer Service phone number. I don't feel like calling and having someone with a medium-thick accent repeat back to me what they understood my issue to be 5 times until they finally get it right. I would love to write it out so someone can just re-read it if they don't wrap their mind around it the first time.
I don't see why I should have to argue my case. I went to an Apple Authorized Reseller, swiped my credit card, and walked out with a new iMac. No, it's not the newest model, but its still new. That's money that just went in Apple's pocket, because of my purchase. There is absolutely no reason why it should be this big of a struggle just to get the warranty that I deserve. I don't feel like I'm being unreasonable or out of line in any way.
Does anyone know who I can EMAIL about this, or am I going to have to put up with the non-help I get on the phone? They're going to tell me that they can't help me out, because I'm supposedly not covered for phone support anymore. Ugh. Please help.

I'm not sure what anyone here can do
Nothing. These are user to user forums, of which Apple employees do not take part in.
Does anyone know who I can EMAIL about this,
Nobody...Apple does not offer email support/correspondence. Call support and ask immediately to speak to customer relations.

6.0.5.20, at the end of my rope

I installed 6.0.5.20 and it has not allowed my 5G or Nano to connect to iTunes. All I get is the message: "The software required for communicating with the iPod is not istalled correctly. Please reistall iTunes to install the iPod's software."
I've tried reinstalling it. I've tried removing and reinstalling it, I've tried the McAfee firewall (it has full access to iTunes), I've tried the Quicktime standalone install, I've tried the MSCONFIG setting, I've tried removing iPod updater 2006-28-06, I've tried sending an e-mail to Apple. I can't restore my iPod, because now I get an "iPod service error" when I try to run any updater, new or old. Absolutely nothing has worked.
Does anyone have any ideas? I'm at the end of my rope with this.
Windows XP
5G and 4GB Nano Windows XP

Ok, I solved my problem. Here's what I did: I went through all the steps in the article linked above and nothing seemed to work. Part of those steps has you remove iPod stuff from your computer. I would follow the steps for "Removing iTunes." From what I could figure out, it was the iPodService.exe that was causing my problem because it would never show up under the "Processes" menu in the Task Manager. I downloaded version 6.0.4 from oldapps.com. Then I reloaded my iPod software from the CD that came in the box, my Nano had iPod update 3-26-06 on it. When I opened iTunes, everything worked fine. My God it took forever to get that done. I've been working on this for a week.
5G and 4GB Nano Windows XP

Do you have any ideas why Motion 5 would run slow on a computer? I have an Imac with 8Gigs of ram, and plenty of hard drive space, but it still gives me the beach ball when I add a few lights and effects. I'm at the end of my rope.

Do you have any ideas why Motion 5 would run slow on a computer? I have an Imac with 8Gigs of ram, and plenty of hard drive space, but it still gives me the beach ball when I add a few lights and effects. I'm at the end of my rope.

You probably don't really need 1080 at 60 for your finished projects but since you're just starting out with Motion, you need to lower your expectations. A long way. 1080 is about 2 million pixels per frame, DV is only about 400,000. That's not just five times as many pixels for the Mac to track; everything in video is exponential.
Explore the training tutorials available by Mark Spencer. You will get an idea of how his super powerful machine reacts with the software.
Adding a light roughly doubles the processing time over flat scenes. Two lights increases processing again. Reflections require processing the lights and then calculating the reflections so add another quarter of the time required for flat scenes. Add camera movement, motion blur, and depth of field and you need exponentially more processing time for every frame. The preload of renders into RAM is one of the cooler features of Motion, as comapred to After Effects, but that takes tons of time, to.
Try working in ye olde DV resolution for a few days. Get to know the software's limitations and what gets imposed by your Macintosh. Step up to 720p/30 and see how things slow down.

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

Automatic tab when reaching the end of a field with limited character number

Hello!
Is there a way of activating an automatic tab behaviour when the user reaches the end of a field with limited character number?
I'd like the cursor to jump to the next field in tab order automatically.
Possible?
Thank you for any hints!
Marcos

Hi,
What if you tried something like the following example? This works using formCalc on the change event for the field the user is currently typing into:
    var fullCount = 3
    var currentString = xfa.event.newText
    if(Len(currentString) >= fullCount)then
        xfa.host.setFocus("TextField2")
    endif
Or, if you prefer javaScript:
    var fullCount = 3;
    var currentString = xfa.event.newText;
    if(currentString.length >= fullCount){
        xfa.host.setFocus("TextField2");
These work very smoothly.
Hope this helps!
Stephen

I am trying to get a good copy of my home video on DVD using IDVD. On editing the video all the viewing screens show the video perfectly in HD. When I burn the video to DVD all the end results are buzzy with squiggly lines. Any fix? Thanks?

I am trying to get a good copy of my home video on DVD using IDVD. On editing the video all the viewing screens show the video perfectly in HD. When I burn the video to DVD all the end results are buzzy with squiggly lines. Any fix? Thanks?

Hi
There are several layers to this Q
A. There are no HD in DVD - DVD is as standard only SD-Video what ever tools used to produce it !
iDVD or DVD-Studio Pro or Roxio Toast™ - will only make SD-Video on DVD
B. DVD can be better or worse
• Using "Share to iDVD" is no good way - Better is Share to Media Browser and as Large (NOT HD as result will be worse)
• Using iMovie'08 or 09 or 11 - are not tools to chose if highes quality is of importance - iMovie up to HD6 or FinalCut any version is far better as they send over all lines to iDVD and not only every second one.
• Using Right encoder quality depending on movie and Manu duration is very important
• Use of high quality brand of DVD - is important - I use Verbatim DVD-R
• Type of DVD - DVD-R plays on more DVD-Players (even old ones)
• Burn speed - I set it down to x4 - resulting in less burn errors - plays on more players
• I secure a minimum of 25Gb free space on Start-Up Mac OS hard disk as iDVD and Mac OS needs this and it can not be taked from other hard disks - has to be here.
• What You feed iDVD does matter
Video codecs
Audio file formats
Photo file formats
Yours Bengt W

TS2198 ical (the calendar program) that came with this apple mac pc suddenly stopped working, then disappeared from the computer, from the desktop where I have been using it for the past two years, without trouble, then from the list of applications. . .

ical (the calendar program) that came with this apple mac pc suddenly stopped working. When I pulled the icon from the desktop, it then disappeared from the computer.I have been using it from the desktop for the past two years, without trouble. It has uninstalled itself, without my intervention and has eradicated all traces of it, including all my entries from the computer memory. There is no program in the applications list. Can you say why this may have happened please?

I opened one of the .calendar folders. There was a folder named Events which had either one or some files ending .ics. I opened several of these, which put up a dialogue window showing some parameters with data strings attached as follows :-
BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Apple Inc.//iCal 4.0.4//EN
CALSCALE:GREGORIAN
BEGIN:VEVENT
CREATED:20110824T070048Z
UID:6AAAB8A2-64C7-4E88-8E5E-46A4D1036544
DTEND;TZID=Europe/London:20110824T104500
TRANSP:OPAQUE
SUMMARY:Try to avoid general urticaria triggers such as stress\, alcohol
\, aspirin\, hot baths\, rapid temperature changes\, tight clothing and
junk or processed foods containing sulphur dioxide\, sodium benzoate\, s
alicylate and tartrazine.\n\nAvoid tomatoes\, strawberries\, strong chee
se\, dark fish and fermented foods.
DTSTART;TZID=Europe/London:20110824T094500
DTSTAMP:20110824T070102Z
X-APPLE-EWS-BUSYSTATUS:BUSY
SEQUENCE:2
END:VEVENT
END:VCALENDAR

I have a new iPhone 5S. While trying to learn about it, I accidentally recorded a voice memo with no content. I cannot now figure out how to get rid of it. There is a banner across the top of my phone with this memo which I don't want. Help!

I have a new iPhone 5S. While trying to learn about it, I accidentally recorded a voice memo with no content. I cannot now figure out how to get rid of it. There is a banner across the top of my phone with this memo which I don't want. I have deleted it from iTunes but cannot get it off the phone. Help!

The banner usually indicates that the memo is "Paused." If you go back into voice memos, touch the word "Done" beside the big red pause button, give it a name, then it will show in a list. Touch the memo in the list then touch the trash can icon that should appear.

Error 2000 - The server is not compatible with this deployment client

I'm getting an error trying to deploy a composite. It works for everyone else on the team, and our configurations are the same (as far as we can tell). We've compared JDev version info.
Any idea what I can try? Thank you.
[12:57:48 PM] ---- Deployment started. ----
[12:57:48 PM] Target platform is (Weblogic 10.3).
[12:57:48 PM] Running dependency analysis...
[12:57:48 PM] Building...
[12:58:05 PM] Deploying profile...
[12:58:06 PM] Wrote Archive Module to C:\pkgs\svn\mdm\trunk\src\DRM WDK Source Code\Workflows\DrmRequestWorkflowSelection\deploy\sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
[12:58:06 PM] Deploying sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar to partition "default" on server soa_server1 [http://10.22.2.40:8001]
[12:58:06 PM] Processing sar=/C:/pkgs/svn/mdm/trunk/src/DRM WDK Source Code/Workflows/DrmRequestWorkflowSelection/deploy/sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
[12:58:06 PM] Adding sar file - C:\pkgs\svn\mdm\trunk\src\DRM WDK Source Code\Workflows\DrmRequestWorkflowSelection\deploy\sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
[12:58:06 PM] Preparing to send HTTP request for deployment
[12:58:06 PM] Creating HTTP connection to host:10.22.2.40, port:8001
[12:58:06 PM] Sending internal deployment descriptor
[12:58:06 PM] Sending archive - sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
[12:58:07 PM] Error deploying archive sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar to partition "default" on server soa_server1 [http://10.22.2.40:8001]
*[12:58:07 PM] HTTP error code returned [2000]*
*[12:58:07 PM] Error message from server:*
The server is not compatible with this deployment client: please verify that the server is a SOA managed server and that its version is supported by this deployment client
[12:58:07 PM] Check server log for more details.
[12:58:07 PM] Error deploying archive sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar to partition "default" on server soa_server1 [http://10.22.2.40:8001]
[12:58:07 PM] #### Deployment incomplete. ####
[12:58:07 PM] Error deploying archive file:/C:/pkgs/svn/mdm/trunk/src/DRM WDK Source Code/Workflows/DrmRequestWorkflowSelection/deploy/sca_DrmRequestWorkflowSelectionComposite_rev3.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Edited by: J Keller on Jun 6, 2013 8:03 AM

Can anyone reply plz???

Could not complete your request because the file is not compatible with this version of photoshop

Hello,
I'm a beginner in PS. I was edit TIFF file in PS. Size of file is 21x89.1(22.6 MB). Then suddenly power - cuted. But after 5 min turn on PC and PS can't open my TIFF file.
Error is (could not complete your request because the file is not compatible with this version of photoshop)
What should I do, how I open this TIFF file? I realy need to open this file?
Please help me...
Regards, Suvd.S

Out of curiosity, were you actually saving the file at the moment the power cut off, or had you just saved it?
If not, I don't understand the reason the file should have become corrupted. If it was successfully saved on disk from the prior save operation, just shutting off the power on Photoshop would lose your current edits, but the file should still be intact.
-Noel

We are sorry, but we are unable to complete your request.•The Office 2007 Product Key provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.

Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???

Over the years I have had many ISP and email addresses - but now we have finally gone almost fully virtual...
I have a live login and MS ID 4 my SkyDrive account but I only use my MS touch with 8.1, SkyDrive and office 365 for mobility.
And I still like to backup to my own server!!!
What would be good is if I can put all the software licenses and product keys of the software and keep a record of my mac addresses for hardware and even static IP's in a file or a secure location within the MS online store.
That's where MS wants me to get my computing needs from in future and I will always be able to retrieve it in future but what about the $$$$$ I have spent on software, hardware and applications prior to now???
I know u guys love 2 collect data 4 marketing analysis,
4 example I have an old PC that is still running a server from last century - if you knew about it a simple script would allow you to offer upgrades or at least relevant MS products - UNLIKE the rubbish adds I just turn off or tune out
now...
Why cant I add products previous online email purchases into the 1 MS live ID account where I can keep it together? If you make that available I don't have to have separate steam accounts, EA game accounts, ASUS and adobe accounts etc
etc.
What has brought me 2 this is I was looking for my office pro 2007 disks to rebuild a HOME USE ONLY windows 7 laptop (NO touch screen so 8.1 is no benefit at all)
I HAVE 4 Genuine PRODUCT KEYs for Office 2007 BUT EVERY TIME I WENT TO DOWNLOAD the software - regardless of the key I used - I got the error message: We are sorry, but we are unable to complete your request.•The Office 2007 Product Key
provided is already associated with another user on this site. Please log in with the user information originally used with this Office 2007 Product Key.
That's crap - This is a clean brand spanker install of Win7 and there was nothing b4 I put the oem drivers from Toshiba back on.
I looked at dozens of support pages and forum blogs and tried for hours to get a copy to download - including incognito and other logins but because my default PC name is also my MS Windows live ID the same error was repeated.
I keep away from the non MS sites for these things and with good reason - there were heaps of similar users with the same issue or very close to it that had downloaded from a supposed MS copy from eValue or digital river etc and the next
thing was total corruption of the OS.
EVENTUALLY I found a LIVE MS chat on a support site in the US and she gave me a link to a slightly older version which will need updating and some reg edit changes but so far, so good.
The point is - what a crock !
I should be able to just keep all my software, drivers, updates, service packs, and versions that I have upgraded in the MS store.
If Microsoft aren't going to support XP or Office 2003 and eventually 2007, vista & Windows7 not far behind??? then that's still no excuse for them to put these restrictions and limits when I OWN my copy of the software!!
Unlike office 365 and SkyDrive space which is described in the T&C (that we all read before ticking that radial button to agree of course) as ONLY under a leased licence.
IF Microsoft can support AND develop software that supports SQL2000 Servers, why is it so hard to archive and keep the same info for everyone???

How do I resolve: "Could not complete the Crop command because the file is not compatible with this version of Photoshop" error message?

Photoshop document created in current version of PSCC2014, now will not crop, resize, etc without throwing compatibility error.
"Could not complete the Crop command because the file is not compatible with this version of Photoshop."
How do I resolve without recreating the file?

Ooops. Hit save reply prematurely.
You may be able to open the flattened composite or the embedded JPEG preview of your file in Adobe Illustrator, GraphicConverter (Mac only) or some such application, but your layers will be gone.
The problem of working across a network is that it's not supported by Adobe:
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

I'm at the end of my rope with this thing!!

Similar Messages

Maybe you are looking for