I'm Cann't print to my printer LaserJet 1536 dbf MFP by Tcp/IP

i installed the new laserjet printer (HP LaserJet 1536 dnf MFP) with driver when i download from HP Web  (Full Version).
When the driver install will be finished  i answer connected my printer with Networking (TCP/IP) Manual configuration mode
After finished i already pass to test scan with flat panel, load feeder, fax in/out, but cannot print
but i use USB Cable to connect my printer it can print 
Question : how to setup printer to print with TCP/TP 
This question was solved.
View Solution.

Hello MoUOun,
Welcome to the HP Forums!
I understand you're unable to print using the Laserjet 1536 MFP. I will do my best to assist you! First, what is your operating system on your computer? Windows or Mac?
I would recommend downloading the Print and Scan Doctor, to verify if this utility fixes why you're unable to print. (This is only for a Windows computer.) Please post the results on this post, if this did fix anything.
Next, please follow this entire HP document on 'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print. Make sure the printer port is correct, which is indicated from this document.
Please post your results, as I will be looking forward to hearing from you. Have a great day!
I worked on behalf of HP.

Similar Messages

  • HP LaserJet Pro 400 MFP M425dn won't print text at 72 point size or larger

    My workplace recently purchased an HP LaserJet Pro 400 MFP M425dn all-in-one printer. It works excellently with the exception of the fact that it won't print text that's 72 points or larger in size. I've tried numerous fonts that're pre-installed with Windows, and all of them print properly at point size 71.5 or smaller; anything else simply doesn't show up in prints. The content that's sized at 72 points or higher *does* affect the flow of other printed content on the page, however. It's like the 72-point or larger text is occupying space, but it's completely invisible on the printed page. I've tested this using Microsoft Word 2002 on three separate computers, two of which have Windows 7 installed and one of which has Windows Vista installed. The problem is identical on all three computers. The printer is connected via ethernet cable to our wired network. I've installed the included printer software, and I don't believe that there are any updates to it that weren't installed up to this point. Any thoughts on how to resolve this issue?

    hello, i only made an account to solve this for you guys because it has been a headache for me also.... let me apologize before hand for terrible grammar and punctuation i am in a huge hurry  Now this may not work for everybody but i fixed it on my machine with the following   now before you print ...use (ctrl+p) in your word processor to open the print window click on (properties) then navigate to the (advanced) tab now, I have a section called printer features under this category there is an option to "send truetype as bitmap" enable this and see if it can help any of you, for me, with this ENABLED I can print any size font my word processor will allow me to type  specs of my machinedell d6420win7msoft word 2007 printer itself is hp laserjet 200 color m276 printer driver is HP LaserJet 200 color MFP M276 PCL 6 i understand that this printer and driver is not identical to yours per se  but the nature of these drivers makes it highly likely that this solution will work for most of you  if this helps, have somebody else post it more noticeably because i will probly not be signing back in to this website i created this account just to post this and hopefully solve this annoying issue for many of you ...no kudos needed   

  • Cannot print duplex with hp laserjet 1536dnf mfp

    I am using a HP LaserJet 1536 dnf MFP printer in Windows 8.1 with USB 2 connection.  Cannot print on both sides of sheet because clicking on print properties does not bring up the properties dialog window.  There is a momentary flicker as though it is trying to activate, but no window.  It worked fine until a few days ago and I can't think of any change that might account for this.  Any help with this problem will be greatly appreciated.

    Hi @Marlin1 ,
    I understand that you are having issues duplexing, the printer properties aren't opening to make any changes. I would really like to be able to help you resolve this issue.
    You can always restore your computer back to a earlier time when everything was working properly. It may have been from a Windows Update. How to refresh, reset, or restore your PC on Windows 8.
    If you would prefer not to do the System Restore, you can try the following steps provided:
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
    Uninstall and reinstall the printer software.
    Uninstalling the Printer Software.
    HP LaserJet Full Feature Software and Driver.
    If there is anything else I can help you with, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Why cann't my applicatio​n print my report?

    My Labview programe can work well until I use the tool "Building a Stand-Alone Application or Shared Library" .I want to change my program to be a *.exe file. The matter is that my printer can not print the report.what can I do?
    I use Labview 6.02.
    I am hunger for your answer.

    Hi.
    I experienced almost the same problem. I could run and print report on my computer with FDS Labview 6.0.2, but after distribution of stand alone application I received error message: "oleautomg.cpp line 364" and no printed report. I am using W98 on both computers.
    I contacted NI, but they did not give me any useful advice. So I temporarily solved this problem by creating Excel report with minimized window, so user does not see anything on the screen. I am still looking for solution to work through normal report. On my opinion application builder does not pick up some *.dll that is necessary to print standard report.
    Hope you will find some good solution and post it in here.
    Good luck,
    Peter.

  • Questions on default print quality and print order

    I recently upgraded to CS 5.5, a clean install on a new Mac running 10.7. I've found two issues regarding printing from both Acrobat and InDesign:
    In both programs, if I go directly to print (command-P, then hit OK without changing settings), documents will print at my printer's default setting, which is for a high-quality photo on glossy paper. (I haven't figured out yet how to change that default.) I want it to print to my faster standard quality  setting, which is generally also the "last-used" setting. I can of course go into printer settings to fix -- each time I do that, my standard setting is already set in that window -- but I have to make that move every time I print.
    Previous versions of both programs (CS3) automatically went into the last-used or standard setting. How can I get that back?
    Also, print order hasn't been working as it did in CS3. Documents print first-page-first in CS 5.5, unless I check "Reverse order"; in CS3, docs printed last-page-first automatically, without checking any additional box, making documents easier to collate. Also, on many documents, "Odd pages only" prints the even ones, and vice-versa.
    How can I get the automatic reverse order and correct odd/even back in Indesign 5.5 and Acrobat X Pro?

    Hi Davis,
    Well, if you are able to log on the BPS application (thus, a Web Interface if I'm not mistaken) then it means that some user is logged on the ABAP-side. It is either a "personal" user or a technical (common) user, that is used for anonymous access.
    You will certainly be able to track down this user with the SM04 transaction.
    You should be able to add a button to the BPS page. One idea would be to call an URL with an ICF service behind that will be able to process the parameters contained in this URL.
    It will be this very ICF service that will call the BAPI.
    Try these links
    http://help.sap.com/saphelp_nw04s/helpdata/en/55/33a83e370cc414e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ea8db790-0201-0010-af98-de15b6c1ee1a
    Hope this helps.
    Best regards,
    Guillaume

  • Direct Print smartform to printer via  JOB_OPEN function and using SUBMIT

    Hello,
    I can not able to printout from forms . I can able to get spool number but it is not printing directly to printer (printer Output should come automatic). I am getting error message in SP02 as Status ->Waiting    when i check is showing as "Frontend unavailable".
    please find sample code below to test same:
    REPORT  ZTEST_1                                  .
    constants : wc_x type c value 'X'.
    DATA: wv_val(1) TYPE c,
          wv_pripar TYPE pri_params,
          wv_arcpar TYPE arc_params,
          wv_lay   TYPE pri_params-paart value 'DINA4',
          wv_lines TYPE pri_params-linct,
          wv_rows  TYPE pri_params-linsz.
    data: wv_jobname like tbtcjob-jobname.
    data: wv_jobcount like tbtcjob-jobcount,
          wv_host like msxxlist-host.
    data: begin of ws_starttime.
            include structure tbtcstrt.
    data: end of ws_starttime.
    data: wv_starttimeimmediate like btch0000-char1 value 'X',
          wv_flag(1),
          WV_DO_PRINT type i.
    concatenate sy-tcode+0(4) ' ' 'sample test - print'
    into wv_jobname.
    *Job open
      call function 'JOB_OPEN'
           exporting
                delanfrep        = 'X'
                jobname          = wv_jobname
                sdlstrtdt        = sy-datum
                sdlstrttm        = sy-uzeit
           importing
                jobcount         = wv_jobcount
      if sy-subrc eq 0.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
           EXPORTING
                in_archive_parameters  = wv_arcpar
                in_parameters          = wv_pripar
                LIST_NAME           = 'JOB NAME'
                LIST_TEXT             = 'test_text'
                RECEIVER             = sy-uname
                IMMEDIATELY           = wc_x
                RELEASE               = wc_x
                USER                 = sy-uname
                layout                 = wv_lay
                no_dialog              = wc_x
           IMPORTING
                out_archive_parameters = wv_arcpar
                out_parameters         = wv_pripar
                valid                  = wv_val
    break-point.
    wv_pripar-PRSAP = space.
    wv_pripar-PRIOT = 1.
    wv_pripar-prrec = sy-uname.
    if not wv_val is initial.
    *call external program and pass data
    submit SF_EXAMPLE_01
          USER sy-uname
         via job wv_jobname
         number wv_jobcount
      TO SAP-SPOOL
    SPOOL PARAMETERS wv_pripar
    ARCHIVE PARAMETERS wv_arcpar
    WITHOUT SPOOL DYNPRO
    AND RETURN.
    endif.
    *Close job
      ws_starttime-sdlstrtdt = sy-datum .
      ws_starttime-sdlstrttm = sy-UZEIT.
        ws_starttime-IMSTRTPOS = WC_X .
      call function 'JOB_CLOSE'
           exporting
                event_id             = ws_starttime-eventid
                event_param          = ws_starttime-eventparm
                EVENT_PERIODIC       = space
                jobcount             = wv_jobcount
                jobname              = wv_jobname
                laststrtdt           = ws_starttime-laststrtdt
                laststrttm           = ws_starttime-laststrttm
                prddays              = 0                       "set to 0 not repeat
                prdhours             = 0
                prdmins              = 0
                prdmonths            = 0
                prdweeks             = 0
                sdlstrtdt            = ws_starttime-sdlstrtdt
                sdlstrttm            = ws_starttime-sdlstrttm
                strtimmed            = wv_starttimeimmediate
      endif.

    Hi,
    As far as printing to devices not all devices support Bluetooth. Many devices support Bonjour protocal, IPP. The main print port is 9100. Additionally you can see what IO protocols are supported on a product by looking at the EWS (Embedded WebServer) there should be a networking page with that information.  Port 9100 is your basic print port and different devices will support different formats (PDF, JPEG, PCL5, PCL6). If there is an API you can find (i am not familiar with J2ME availible calls, then you can use those and send the data to port 9100. Again that is the basic path most printers will accept. not all devices support bonjour not all device support bluetooth etc... Hope that helps and good luck.
    I am an HP Employee.

  • Manual duplex printing doesn't work for LaserJet 100 color MFP M175a

    Hi !
    OS Windows 8.1. Printer LaserJet 100 color MFP M175a. Driver version 61.108.8.10073 date 2011 Apr 13th
    1. After switching on checkbox "Print on Both Sides (Manually)" on "Finishing" tab of Print Properties Dialog and
    start printing, dialog with instruction how to turn paper appears. Then printer must print odd pages, stop for
    turning paper and then continue printing of even pages on the back side of paper sheets. But my device prints
    all pages sequentually in order 1,2,3,... without any breaks. What is it- my mistake or possible bug in driver ?
    2. Windows API function DeviceCapabilities with fwCapability=DC_DUPLEX for this printer returns 0 (duplex printing
    impossible). This value for any other HP printer, even without automatic duplexer, always equel to 1.
    This question was solved.
    View Solution.

    Hi @Up205, 
    I see by your post that you are having issues manually printing two-sided. I can help you with this.
    The software for this model on Windows 8.1 is the Basic Solution Software and Driver. This basic software solution provides print and scan functionality only. Did you download and install the newest drivers?
    HP LaserJet Pro 100 color MFP M175nw Drivers.
    Check to make sure Bidirectional Support is Enabled.
    Go to the start up screen, (tiles menu) type in "Devices and Printers", select settings, click on Devices and Printers, right click on the printer, left click Printer Properties, on the Ports tab, put a check beside Enable Bidirectional Support.
    You might have to restart the computer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

    HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
    OS: Windows 7 Ultimate x64
    Browser: Google Chrome 15
    HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
    Printer is connected by WiFi to 4 computers

    Hi AbZu, 
    You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
    http://support.google.com/chrome/?hl=en
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Printing problem with printer EPSON 1070+

    Hi ,
    I am printing Document using  SAP smartforms on EPSON 1070+ Printer. The device type used for task is EPESCP.
    Page foramt I am using is DIN3.
    When print is taken on specified printer it is printing all content of document in one font and not in the font which has been attached part of text.Document is display properly(text in different fonts) in print preview,but output on actual printer comes differently.
    What should be done to correct problem ?
    Thanks in advance,
    Amit R

    Hi Amit,
    Have you checked by printing Word document on same printer??...
    If the right part of the paper still left blank, then margin setting of the printer in windows has problem,
    Otherwise check it in SPAD only.
    Also check your Margin settings at printer.
    Regards,
    Audy

  • Problem with HP Printer - has stopped printing for no apparent reason!

    Hi all,
    I have a Powerbook G4 and an HP Deskjet 3820 printer that have got along just fine ever since I first got the laptop - in fact, until just a few days ago it was printing normally with no trouble at all. Now, however, it stubbornly refuses to print anything (from Word, Preview, Firefox - so I'm guessing it's an OS problem...)
    The fault is as follows: I turn on the printer and it feeds a single page through without printing anything on it, despite having no instructions to do so. Whilst doing so all of the printer's lights flash in sequence. When it's idle the green status light next to the power button is on, with no other lights on. When I ask it to print something the print dialog comes up and the job is transferred into the print queue. The job loads but instead of printing, it moves straight from the print queue into the 'completed jobs' screen. Whilst it's doing this the power light on the printer flashes.
    If I try to do a test print I get the message "unable to print: error 1000".
    I've checked the leads and changed the printer's ink cartridges. I reset the printer in the printer utility box, then deleted and reinstalled the printer in the printer utility box. I've repaired the disk permissions (having deleted the printer, and then restarted before I tried to reinstall the printer), and finally I've installed the HPJIS drivers and the associated bits that come with them. I've even tried to use a different USB port, all with no effect.
    The only thing that I've installed on this computer recently that I thought might be having an effect is the Citrix ICA remote desktop client - but I've deleted that and repaired permissions afterward, so I don't see how it could still be having an effect.
    I'm basically now totally stumped. Any suggestions? I'm pretty keen to get this sorted out ASAP as I'm a student and need the printer to print off work and exams. Plus it's driving me up the wall. Any help would be greatly appreciated.
    Thanks
    Chris

    Mr or Ms Light,
    No, I don't think it's an OS problem. Printing on the Mac is nightmarishly complicated (under the hood), and HP installs its own system that bypasses the default FreeBSD system. This is an occasional problem with my HP 5550. HP claims to have good user support.
    I've had, regularly, the exact symptoms. I've a migraine now, so I can't remember what I do about it. But it would be typical of me to press the printer button off, then clear the queue, then turn on the printer and have it remove the paper still in it. If needed, I might restart the computer.
    As for the cause, for the last 10 minutes I've been asking my 4-year old granddaughter, but she's not in the mood to tell me. However, she often prints pictures of Elmo off the internet to color, and she captures parts of screens and prints them. This is with the USB cable disconnected; and its when I reconnect it, the exact symptoms you describe occur.
    Try the above, and I may be able to give you a definitive answer later, after my granddaughter's nap.
    Bruce

  • Printing problem with HP LASERJET P1007

    SINCE I UPGRADED TO MAS OS X SNOW LEOPARD I AM NOT ABLE TO PRINT TO MY HP LASERJET P1007 CONNECTED TO AIRPORT EXPRESS. KINDLY HELP

    HP LaserJet 1020 Wi-Fi SOLUTION (after 10.6.3 update)
    Our 1020 stopped printing via Airport . . .
    SOLUTION:
    * Take usb printer cable from Airport base, and plug into Mac
    * "Add Printer" in System Preferences
    * Choose "HP Laserjet xxx.224" driver (tip: type digits of your printer model ## in search bar to find more quickly)
    * Test print via the USB
    * Return usb cable to the Airport base
    This worked for us; your mileage may vary . . .

  • Printing problem with HP Laserjet 2550

    I have an HP Laserjet 2550 which is having problems with my Macbook Pro with 10.6.3
    Snow Leopard has the drivers for the HP 2550. So when I added the printer it picked up the drivers.
    The problem I am having is that it send the job to the printer but the printer does not print it. When I restart the printer on startup it prints the job. I have to do this every time.
    Is the problem with the Mac or the printer?

    Have you run Software Update to check that you have the latest HP drivers? They have done a couple of revisions since SL was released. Of course, if you are still running 10.6.3 SU will come up with many other updates some of which might be relevant to the problem.
    You might also do some maintenance - repair permissions, etc. This could make a difference. There are lots of other steps that might be taken but try these first.
    Neville

  • Printer won't print too- need a new printer head. i want to know if you have one in stock

    Hi, my printer won't print and the error message states "bad printerhead".  My printer model is  HP officejet d 155xi.  I need to know  how much it costs or would it be cheaper to buy a new printer.  Still have four cartridges of ink.  Please advise.  Thanks.

    HI,
    You can find the General prices for the printheads HERE, if you only have to replace one its ok, but keep in mind that the other printhead are likely to be just as old and might break down as wel.  
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • HT3669 I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

    I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

    Check the printer itself.  Some printers you need to set the color & B&W settings on the printer itself instead of the Mac.   If that is not the case w/your printer, contact HP tech support and/or post in their forums if they have one. 

  • How do I set up my printer to only print in black?

    how do I set up my printer to only print in black?

    Please read this post then provide some details.  What printer model? What operating system?   Depending on your printer model you might remove the color cartridge, forcing black only printing, or select "Print in Grayscale" and "Black ink only" in the driver. 
    Some printer models (whether from HP or other manufacturers) may not allow printing in black if the color inks are empty.  There are also some other constraints, black only printing is generally not available when printing on photo papers and may not be available when printing with an automatic two-sided duplexer.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for