I'm confused about 6th and 7th generation ipod classic
what is the difference between the 6th and 7th generation ipod classic??
Any song purchased from any of the five computers you've authorized to play content from the iTunes music store will play on all of the authorized machines. You will need to copy the actual song files yourself, as you probably won't be able to redownload the songs from the music store without purchasing them again. Some people have gotten previously purchased music redownloaded for free; contacting the Music Store customer service is necessary for this.
(11376)
Similar Messages
-
What's the difference between 6th and 7th generation iPod classics?
Hello
I want to get my bf a iPod classic for his birthday and I was wondering what is the difference between the 6th and 7th iPod classic 160gb?
Thanks for any adviceClick here for information.
(83523) -
Are batteries interchangeable between 5th, 6th, and 7th gen iPod Classics?
I'm currently working on upgrading several 5th, 6th and 7th gen iPod Classics (or Videos in the 5th gen case) and I need to replace the batteries. I'm wondering if the batteries are interchangeable. I see when I look at them that all batteries have the same voltage and the same basic specs (some being lithium-ion and some lithium polymer). One seller on Ebay lists them as interchangeable, although I'm not sure I trust them and I don't get the impression they speak clear English. Also, if anyone wants to give their preference on the two types of battery (Li-Ion or Li-Poly), I'd be happy to hear that too.
The answer is rolling back to 10.10.1 from Time Machine. Doing that solved my problem.
-
Why will my 7th generation ipod classic not work in my 2006 VW Passat?
I equipped my vehicle with the VW iPod connector that was hardwired into my vehicle. I have used both a 1st Gen iPod video/classic as well as a 4th Gen iPod nano with no issues. However, the 7th gen iPod classic I recently purchased will not play music through my car's stereo system. It will charge, but is otherwise undetected by the vehicle.
Because it isn't designed to do that. The only Bluetooth profiles on the Nano are A2DP (Stereo Bluetooth) and low energy (think heart monitor). You cannot sync with it.
-
Please help me and advise if i should be changing my ipod.
is there any ipod 7th generation that does not make this hard drive noises? or is this the case with all the ipods???
I'm not feeling well about this issue, as i just noticed while surfing through my songs!What you are hearing is the sound of the iPod's internal hard drive spinning up to read data from disk for playback. So basically, what you are hearing is completely normal for the iPod Classic. If you still feel that it is unusually loud, find another person with an iPod Classic and compare them. If your iPod is louder, it could be signs of a faulty/damage drive, but don't be sure quick to jump to conclusions.
B-rock -
Does the 7th generation iPod classic have a glass screen
does the 7th gen.... ipod classic have a glass screen an what the average life span with normal everday useage,,,,
It is a glass display and the average lifespan depends on a number of factors such as how often it is used and under what conditions, etc. I would say 2 - 3 years overall is a very good number for these types of devices, but many users recieve many more years of use than that.
B-rock -
Recently, iTunes upgraded. My 7th generation iPod is now not recognized and I cannot sync. The troubleshooting talks about being visible in Windows (iPod is invisible) No other options and nothing about windows 8
I have had similar issues with mine, happens mainly if I transfer songs and then decide to disconnect my iPod to listen to them with my IEMs (I use Interenet Explorer in my case and it is not neccessarely up when this happens, so I seriously doubt it is an issue conencted to the web browser). I have no patience for this so my trick is I try to eject it from iTunes, if that does not work, then I bring Windows explorer up, right mouse click on the iPod mounted drive and select Eject. It gives me the same warning but there is a third button selection called Continue. When I choose that it just disconnets the drive anyway and the iPod is finally disconnected. It seems to work each and every time I do it so this solution is fine for me. Would be intersting to see what the real root cause of this is because I started getting this problem with the newer iTunes 11.
-
The on/off button on my 6th gen iPod nano recently got spoilt and I sent it back to the shop for a repair/exchange a week ago. Now I have just found out about the new 7th gen iPod nano and I am wondering, can I get the new one as a replacement?
No. You can turn your 6G Nano in to be recycled at your local Apple Store for a 10% discount towards the purchase of a new one. Otherwise, your only other option would be to sell the iPod on Craigslist or eBay and use the proceeds from the sale towards the purchase of the new 7G nano.
B-rock -
I have a new HP Pavilion running Windows 7 with lots of memory and a terabyte of storage, using iTunes 11 with a 6th generation Ipod Classic. Have used my current iPod for years with no problem until today; when I try to eject the device iTunes stops responding, there is a delay of about 10-15 seconds until a message box pops up: "the ipod cannot be ejected as there are files in use." It also won't eject from the windows taskbar, same type of message appears. iTunes remains unresponsive until I click "ok" on the message box. I've reset the ipod twice and disabled the "enable disk use" button for the ipod -- with no change in symptom.
I am not certain as to the fix but am 100% sure that the problem does not occur if I close my open browser; it occurs only when I have an Internet browser open. I experimented with Google Chrome that I normally use, and also with Internet Explorer -- when either browser is being used the ipod cannot be ejected.
I've used iTunes 11 for about 3-4 weeks and this problem had not occurred until today.I have had similar issues with mine, happens mainly if I transfer songs and then decide to disconnect my iPod to listen to them with my IEMs (I use Interenet Explorer in my case and it is not neccessarely up when this happens, so I seriously doubt it is an issue conencted to the web browser). I have no patience for this so my trick is I try to eject it from iTunes, if that does not work, then I bring Windows explorer up, right mouse click on the iPod mounted drive and select Eject. It gives me the same warning but there is a third button selection called Continue. When I choose that it just disconnets the drive anyway and the iPod is finally disconnected. It seems to work each and every time I do it so this solution is fine for me. Would be intersting to see what the real root cause of this is because I started getting this problem with the newer iTunes 11.
-
I have a 7th Generation iPod Nano that started flashing the Apple logo with a white background. I have tried Diagnostics, restoring the iPod and even resetting it. At one point it was in a Restore Loop. I'm thinking maybe it has a virus but reading further says that I may be missing one of the drivers. Is there any way to fix it without taking into a tech?? Please help...miss my music!!
Hi jkjuarez2012,
Thank you for visiting Apple Support Communities.
It sounds like your iPod nano is only showing the Apple logo with a white background, and you've tried many good steps including resetting and restoring the device. I know I'd miss my music in this situation.
Make sure that you followed the steps in this article when restoring your iPod:
Restoring iPod to factory settings - Apple Support
If the issue continues after restoring, your iPod nano may need to be serviced. You can use this link to find out more about iPod service:
If the issue is still not resolved, please read this information on servicing your iPod.
From:
iPod nano (7th generation): Hardware troubleshooting - Apple Support
Best Regards,
Jeremy -
I don't know why my new 7th Generation Ipod fails sync diags on both Win7 and Win8 computers. I am an admin on both machines. The computer sees the device, but ITunes does not, but yet I can eject the ipod.
Hello Dee Nano.
It sounds like your iPod nano is recognized by your PCs, but it isn’t recognized by iTunes. Try the suggestions in the article linked below, they will resolve most issues like this.
iPod: Appears in Windows but not in iTunes
Cheers!
-Jason -
Does anyone know why my music wont play on my 7th generation iPod nano? I've tried resetting it already but that didnt work. Can someone please help.
I would to a Restore. Select the iPod in iTunes. Go to the Summary tab for the iPod. There is a button there to do a Restore. This will erase the iPod, re-install its software, and set it to default settings. After Restore complete, try playing songs on the iPod again.
If THAT does not fix the problem, and it's not bad headphones (since you also tried the "speaker"), there is probably a hardware problem on the iPod. All 7th gen nanos are still under warranty. If you have an Apple Store nearby, you should take it to the store's Genius Bar. To minimize waiting, you can make a reservation on store's web page.
http://www.apple.com/retail/ -
I have a 5th generation IPod Nano that I have registered to my ITunes account. I recently bought my daughter a 7th generation IPod Nano and have attempted to sync this new IPod to my ITunes account. A message continues to appear saying that it does not recognize the (new) device... Any suggestions ??
How to use your iPod to move your music to a new computer
-
I am trying to sync an audiobook from iTunes to a 7th Generation iPod Nano. The manual says audiobooks can be synced to this device by going to iTunes, selecting the Book button and selecting sync audiobooks but when I select the Book button I do not see any syncing options to select. What am I doing wrong?
Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
Above from:
http://support.apple.com/kb/TS3694#error1611
Note it could be a hardware problem -
My 16 gig, 7th generation ipod nano just died yesterday.
I assumed it just needed recharging.
It is not responding. I have complete black screen even when its hooked up to charge....and it wont turn on.
Help!!!!
I got it as a birthday gift around the end of May, its brand new.Clean out the Lighting connector on the bottom of the nano, clean Lightning connector cable, make sure your computer is not set to go to sleep and connect it to the computer and let it charge for 30 minutes. After this time, while it is still connected, hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons.
Maybe you are looking for
-
I am totally new to Java 3D and using it, although I do have to learn it for a project. The only help I need is a step-by-step guide as to how to set up Java 3D on a Windows Vista 64 bit system. I don't know how to go about setting it up, what I need
-
Incorrect type inferrence when returning JSON from a cfc?
So, I have a CF function inside a cfc file that queries my SQL database and then returns the CF query object. One of the database fields is an nvarchar field contains a bunch of check numbers, some of which have leading zeros. The example I have used
-
Using System.out.println() in Scrapbook
I am working through some tutorials on formatting numbers: http://docs.oracle.com/javase/tutorial/java/data/numberformat.html I am trying to use scrapbook. I can't seem to get the result I am wanting from System.out.println("Hello world")...I get nul
-
Problem when "emca -config dbcontrol db -repos create" windows 2008 32 bit
my emca_2011-09-15_12-12-23-PM.log 2011-09-15 12:12:32 oracle.sysman.emcp.util.PlatformInterface executeCommand CONFIG: Starting execution: CMD /C C:\oracle\product\10.2.0\db_1\sysman\admin\scripts\emca\emcaDbUtil.bat "C:\oracle\product\10.2.0\db_1\s
-
hi all i working on designing the application for Blackberry i have created the screen and created the actions for that screen too. in that action i am calling a MBO operation at that time i am sending a value for textbox as Parameter to the method t