I'm currently attempting to create a 2D scrolling map based on GPS co-ordinates

Basically I want I user to be able to view there route based on british grid references form the GPS unit in rel time on a front end vi. Is this possible? please help.

Now it's a bit more clear what you intend to do. As far as I understand you want to display the location of the rover unit on a onboard computer which, I assume, must display a map of the area being traversed.
Provided the short range you are aiming at, I can suggest your using of a simple raster chart being home-made or in a suitable format. Alternative to this system is a more complicated and more costly vectorized chart system which is not usually on the same format of the ENC charts. Please tell us about this issue.
Other questions are:
1. Do you need to log the trajectory of the rover ?
2. Do you need alarms triggered by user-defined events ?
3. Are you going to use a radio-link (UHF, spread-spectrum, etc.) to transmit the
real-time position to a base center ?
Finally, I would like to have your E-mail address and name.
Best regards

Similar Messages

I continue to have a problem attempting to create Panorama with PE 7

Has anyone ever received and answer from Adobe for this problem that actually worked?
Updated
Sunday, November 1, 2009 12:39:26 PM PST
Opened
Wednesday, October 21, 2009 2:47:58 PM PDT
Status
Open - Pending Adobe Response
Product
Photoshop Elements 7.0
Support contract
Adobe Support Program
Subject
Panorama function does not work
Notes & responses
Notes from Customer
Sunday, November 1, 2009 12:39:26 PM PST
I followed your directions and closed all open files including "spySweeper" and "Norton". I went to "run" and entered %appdata% and
deleted "Adobe" NOTE: there was another file titled AdobeUM which I did not delete. I opened Adobe Elements and went to File->New
->Photomerge Panorama and immediately
got
Error 1: Unable to create Window
-Internal error.
Line: 364
-> var w = new Window(res);
I tried this several times from both the edit screen and the screen that shows the individual images and always got the same results
Notes from Customer
Friday, October 30, 2009 9:41:22 AM PDT
I have tried your suggested solution several times and it does not work......fortunately I have found another product that does work
and have moved on to it. I would like to know what is causing the problem particularly since a "lot" of other users are reporting
the same problem on the Internet.
Notes to Customer
Thursday, October 29, 2009 1:10:51 PM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
Our engineers hopefully will find the issue and post a document about it
in the Adobe Knowledge Base and/or release a fix.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Wednesday, October 28, 2009 5:10:30 PM PDT
I followed your instructions and still have exactly the same problem, but thanks for the attempt. I hope your engineers can find th
e problem as if you look on the internet a lot of other people are having exactly the same difficulty.
Notes to Customer
Wednesday, October 28, 2009 10:03:39 AM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
I received your images and was able to reproduce your problem on my
machine several times and also triggered the same error even after
resaving the images using the "Save for Web" function.
Interestingly, after deleting the program's preferences, I was able to
use Photomerge successfully on your images and could not reproduce the
error.
Try the following and see if these steps fix the issue for you as well:
1. Close all open programs.
2. Click on Start > Run.
3. In the run dialog field, type: "%appdata%" [without the quotes].
4. Delete the Adobe folder shown there (this will delete all Adobe
software preferences and settings).
5. Close the window.
6. Launch Photoshop Elements Editor and try using the Photomerge command
on your images again.
The files are being forwarded to our engineers to see if they can
isolate why these images may corrupt or damage Photoshop Elements'
preferences and settings.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available
from 6:00 A.M. to 5:00 P.M. Monday - Friday, Pacific Time.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Tuesday, October 27, 2009 1:29:17 PM PDT
Second file
Notes to Customer
Tuesday, October 27, 2009 11:32:49 AM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
We show only one image uploaded to our Support Portal. Its file name is
Slide-2.jpg. We will need all the images that you are attempting to
merge uploaded to the Web Portal in order to test and to properly
investigate your issue.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Monday, October 26, 2009 5:40:57 PM PDT
Files used to attempt to create panorama are attached
Notes to Customer
Monday, October 26, 2009 4:05:05 PM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
I understand that even after using “Save For Web” that you got the same
error message when you attempted to use Photomerge.
I checked the attachments on the case and did not see the files that I
suggested you upload for our engineers to examine.
Could you please attach the files and we will then see if we can solve
your problem.
You may also call Technical Support at (800) 642-3623. We are available
from 6:00 A.M. to 5:00 P.M. Monday - Friday, Pacific Time.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Monday, October 26, 2009 3:14:06 PM PDT
Will this help?
Notes from Customer
Monday, October 26, 2009 11:03:21 AM PDT
I tried the work around with the "save for web" and got the same message:
Error 1: Unable to create Window
-Internal error.
Line: 364
-> var w = new Window(res);
I can't believe with as many people as are having this problem that Adobe had not developed a solution and released it as a "bug" fi
x. I see that it is also a problem for people using Elements 8 and I can not imagine that is a very good endorsement for your new p
roduct.
Notes to Customer
Monday, October 26, 2009 10:28:41 AM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
I understand that when you attempt to use the Photomerge feature in
Photoshop Elements that you immediately get the errors:
Error 1: Unable to create Window
- OS error:[1400]
Line: 364
-> var w = new Window(res);
We have seen customer reports of this error and have the matter under
investigation.
Currently, it has been determined to be image specific and isolated to
problems processing the metadata in some images.
Our software engineers have been unable to isolate the exact issue with
these problematic images' metadata and have requested that people who
have images exhibiting this behavior be asked to upload them via the
Adobe Support Portal so that they can be examined.
Fortunately, we also do have a potential workaround that may allow you
to merge your images.
Try the following:
1. Open your images in Photoshop Elements Editor.
2. Save each one using the "Save for Web" command available in the File
menu in JPG format with the quality set to "High".
[This will remove all metadata from the images]
3. Close Photoshop Elements Editor and all open images.
4. Open the images that you just removed the metadata from using "Save
for Web" and use Photomerge on them.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available
from 6:00 A.M. to 5:00 P.M. Monday - Friday, Pacific Time.
Kind regards,
Nathan F.
Adobe Web Support
Notes from Customer
Sunday, October 25, 2009 9:03:21 AM PDT
PLEASE!!!!!!!!!!!!!
Look here
http://forums.adobe.com/message/2275858#2275 858
Notes from Customer
Friday, October 23, 2009 2:42:48 PM PDT
When I go into Elements 7 and select File->New->Photomerge Panorama I get the message
Error 1: Unable to create Window
-Internal error.
Line: 364
-> var w = new Window(res);
and can not go any further. If you look at this on your Forum Site
http://forums.adobe.com/thread/362825 you will note that a lot of other users are having the same problem
or look here
http://www.elementsvillage.com/forums/showth read.php?t=44409
Same thing.
I even notice that people usiong Elements 8 are now having the problem.
Notes to Customer
Thursday, October 22, 2009 11:52:08 AM PDT
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop® Elements 7.0.
I understand that when you try to use the Panorama function in Elements,
you receive a message “unable to create window.”
Does this problem happen when you are trying to merge specific images or
does it happen with all images?
What size are the images you are trying to merge? What dimensions, dots
per inch, and file type are the images?
How many images are you trying to merge? Do you have the same problem
if you try merging just two images?
Make sure when you are going to do the photomerge that any extra
programs are closed. The merging process is rather memory intensive so
the less programs running at once, the better.
Try to resize each of the photos to a smaller size, and then retry the
command.
If you receive the error when saving a panorama, try flattening the file
(use the Layer>Flatten Image command), or save the panorama in the
smaller, JPEG format.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available
from 6:00 A.M. to 5:00 P.M. Monday - Friday, Pacific Time.
Kind regards,
Scott K.
Adobe Web Support
Notes from Customer
Wednesday, October 21, 2009 2:47:58 PM PDT
When I try to use the panaroama function I get this message
Error 1; unable to create window
-Internal error
Line; 364
-> var w = new Window(res);
I have tried all the solutions from the forum and they do not work. I even bought a new copy of the program, but no luck.
The function worked before and then stoped working (I had a downloaded version of release 7) That prompted me to buy the new copy A
LL COPIES WERE PURCHASED BY ME
Operating System: Windows XP Home
Has it ever worked? If so, what's changed? (provide comments in description field): Yes
Same results with different file?: Yes
Same results with different computer?: Not Applicable
Recent System Hardware or Software change?: No

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

Attempting to create a AQ$_JMS_MAP_MESSAGE via PL/SQL

I'm attempting to create a AQ$_JMS_MAP_MESSAGE via PL/SQL but can't get it to work.
I'm able to create a AQ$_JMS_MESSAGE and add it to an AQ (of the correct type) however the AQ$_JMS_MAP_MESSAGE can not be constructed in the same way as it does not have a CONSTRUCT method.
Is it possible to create this type of JMS message with PL/SQL? The documentation seems to imply that it can be done.
I have tried the following but get an error; the AQ table is of type SYS.AQ$_JMS_MAP_MESSAGE.
=====================================================
procedure addMessageToAQ AS
--message SYS.AQ$_JMS_MAP_MESSAGE;
message SYS.AQ$_JMS_MESSAGE;
eopt dbms_aq.enqueue_options_t;
mprop dbms_aq.message_properties_t;
enq_msgid raw(16);
BEGIN
message := SYS.AQ$_JMS_MESSAGE.CONSTRUCT(DBMS_AQ.JMS_MAP_MESSAGE);
IF ( message.message_type = DBMS_AQ.JMS_MAP_MESSAGE) THEN
DBMS_OUTPUT.PUT_LINE('The message is a map message');
END IF;
message.message_type := DBMS_AQ.JMS_MAP_MESSAGE;
message.header.set_string_property('header1','hvalue1');
message.header.set_string_property('header2','hvalue2');
message.header.set_string_property('header3','hvalue3');
message.set_string_property('content1', 'cvalue1');
message.set_string_property('content2', 'cvalue2');
message.set_string_property('content3', 'cvalue3');
DBMS_AQ.enqueue(queue_name => 'PROCESS_PASSP_APL_Q',
enqueue_options => eopt,
message_properties => mprop,
payload => message,
msgid => enq_msgid);
END;
=====================================================
ORA-25215: user_data type and queue type do not match
ORA-06512: at "SYS.DBMS_AQ", line 204
ORA-06512: at "BDEV1.PS2032_MVMNTHNDSHKEXTRCT", line 48
ORA-06512: at "BDEV1.JDEV_TMP_PROC_1", line 3
The message is a map message
Process exited.

As far as I know every object type in database has an implicit construct . It's just that nobody created some nice constructor. Take this example as a "hard way" to create message:
-- jms_text_message related variables
tmp_text_message SYS.AQ$_JMS_TEXT_MESSAGE;
tmp_header SYS.AQ$_JMS_HEADER;
tmp_array SYS.AQ$_JMS_USERPROPARRAY;
-- AQ related variables
enq_msgid RAW(16);
eopt dbms_aq.enqueue_options_t;
mprop dbms_aq.message_properties_t;
-- get current date time, so it doesn't change during run of procedure
current_datetime := TO_CHAR(SYSDATE,'DDMMYYYYHHMISS');
-- initialize array
tmp_array := SYS.AQ$_JMS_USERPROPARRAY(SYS.AQ$_JMS_USERPROPERTY('EVENT_TYPE', 100, 'PL_SQL', NULL, 27));
-- create header
tmp_header := SYS.AQ$_JMS_HEADER(SYS.AQ$_AGENT(NULL, NULL, 0), NULL, NULL, NULL, NULL, 0, tmp_array);
-- create JMS_TEXT_MESSAGE
tmp_text_message := SYS.AQ$_JMS_TEXT_MESSAGE(tmp_header,4,'AAAA',NULL);
dbms_aq.enqueue(
queue_name => 'job_queue',
enqueue_options => eopt,
message_properties => mprop,
payload => tmp_text_message,
msgid => enq_msgid);
...

Error 49168 when attempting to create Disk Image

After attempting to create a disk image of a specific CD, I have been unable to create a disk image from any folder or volume. Every time I try, I get (toward the end of the dmg creation prcess) "Unable to create (...) - error 49168."
Creating a blank disc image still works fine.
Judging from my attempts to find answers, this seems to be a rare problem.

I just got the same error and have been looking around Google and elsewhere online. It seems to be rare but I haven't yet found a very good fix, the only thing I've found is this: http://tinyurl.com/d52l4 I'm currently trying that and I'll report back to let you know if it works
All I did from the link was copy the contents of the folder I was trying to burn into a new folder and everything worked just fine. I suppose it had something to do with the permissions of the previous folder. Anyway, hope that helps.
iBook G4 Mac OS X (10.4.3) 1.07GHz, 512 RAM, 60GB HD

I'm having problems with a message that says: An error occurred while Attempting to create the directory: C:/program files/itunes/cd configuarion

I know this is a long story, but I'll be damned if I'm not going to get the most specific help I can (as Apple seems to specialize in assuming user error for all its demonic software). I've never had issues with iTunes before (barring a "Connect to iTunes" snafu with my iPod Touch) -- and never, in fact, with Windows Vista, if you believe that -- but this is the most bizarre thing I've seen.
I recently downloaded the new iTunes v 9.0.3 as I am occasionally prompted to do whenever a new version comes out, and immediately I had problems. Access to the iTunes and Quicktime folders was mysteriously denied after the update, and after several hours of frustration, I was able to grant my own Administrative access to these two folders and installation went through. Thank God.
Then I bought some music. No problems -- downloaded just fine, along with a copy of Cinderella Man and the new episode of Smallville. Life was good for a few days.
Then I connected my iPod Touch to the computer. All of a sudden, Microsoft Windows informs me that the "Apple Mobile Device Service stopped working and was closed," with subtext, "A problem caused the application to stop working correctly. Windows will notify you if a solution is available."
Bullsh*t Windows can help me with anything from Apple.
So I've tried to get iTunes to work with me on this. I've come up against the infamous "iTunes could not connect to this iPhone because an unknown error occurred (OxE8000001)" message. My God, when does it ever end?
So I go into Control Panel > Administrative Tools > Services > Apple Mobile Device and start it back up... only to watch it stop again inexplicably moments later. Hmm... Restart. Stays on. Unplug the iPod and plug it back in. Apple Mobile Device Service stops again. Maybe it's the iPod Service itself. Hey, that one's not started! [Start] "Windows could not start the iPod Service service on Local Computer -- Error 5: Access is denied."
What the f*ck is it with this "Access denied" crap? I've never been denied access to even the most intimate functions, files and folders on my freaking computer before! What has Apple created!?
I thought, perhaps Apple Mobile Device software was somehow removed. Okay, let's redownload iTunes (aka Repair the program from the Programs and Features menu in the Control Panel -- same thing). Huh. "An error occurred while attempting to create directory C:\Program Files\iTunes\CD Configuration," and I can choose to Retry or Cancel. So, instinctively, I deleted the CD Configuration folder, assuming iTunes Setup would just recreate it.
Well, that didn't work now, did it? I deleted it and hit Retry, and it said, "The installer has insufficient priveleges to access the directory: C:\Program Files\iTunes\CD Configuration. Log on as administrator or contact your system administrator." Running the .exe file as an adminstrator changes NOTHING about this predicament.
So that's where it stands. No CD Configuration folder; full access to all files and folders involved; Apple Mobile Device Service still keeps going off for no reason; iPod Service still doesn't run; Repairing/Reinstalling iTunes, Quicktime, Bonjour, etc. does nothing; and God (aka Steve Jobs, apparently) hates me.
. . . . . . . . . . . . Help me.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please researc

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please advise me on the steps necessary for removing these duplicates and establishing a syncing solution that doesn't regenerate the duplicates. There are several applications available that remove duplicates, but I am not sure which ones work or don't work. I want information on this, but most importantly I want to understand how to fix this problem permanently. Also, I read somewhere that Mac's new operating system, Lion, can help deal with duplicates. I don't have Lion, but I would be willing to get it, if this would fix the problem.

Had the same problem with 4 devices (two computers, an iPhone and an iPod). The solution is simple: open the Address Book application in your mac, ask it to locate duplicate entries (under one of the top menu items, "edit" I think), and then ask it to consolidate them: it took me all of three seconds after I figured it out: worked like a charm! PS: if you have more than one mac with unconected Address Books, repeating the operation in the second one may be a good idea.
Message was edited by: mfduran

Can i delete my current account and create a new itunes?

I want to delete my current itunes and create a different one. Can i transfer my purchused items from old one to new one? I wanna create the new itunes with different info but my name. is it possible?

"I want to delete my current itunes and create a different one."
Why would you do this?
"Can i transfer my purchused items from old one to new one? "
No.
"I wanna create the new itunes with different info but my name. is it possible?"
Why not just change the info? Go into your account and edit whatever you like.

IMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso

iMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso. I select the file and the hit return as in step 8 of the Creating an
iSO image document but the box that should open to select use iso does not open. How should I proceed?

The Mac SuperDrive built into your Mac is the Optical drive.
1. Insert your Windows DVD in Optical drive. Disconnect any external storage.
2. Insert a USB2 Flash drive. This will be used to hold the BC drivers.
3. Start BCA. Check the options to download software and Install Windows. You do not need to download Windows. The BCA will download the BC drivers to the USB.
4. Partition your drive.
5. You can see the Windows installer screens at https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2.

Problem attempting to create a purchase order via SRM Portal instance.

Unsing SRM7.0 with PPS; When attempting to create a purchase order via the "Create Purchase
Order" button in SRM Portal instance, after select ECPO type; the following message is show in the screen: "Object or set with GUID 00000000000000000000000000000000 does not exist".
Could you please advise what the problem might be and what to do.Thanks, responds would be very appreciated.Kind regards.
Edited by: ital230 on Jun 30, 2010 10:37 AM
Edited by: ital230 on Jun 30, 2010 11:05 AM

Solve!
The problem was the attributes specialy the BSA.
chekout the attribute should be at highest level and in the user not excluded (grayed).
Also
Define Backend System for Product Category: check that the system for category transfer should be from srm to backend:

I'm attempting to create a pdf from InDesign and the Illustrator image does not appear properly.

I'm attempting to create a pdf from InDesign and the Illustrator logo does not appear properly. The logo has a light blue color background with a black to white gradiant over it with a multiply designation set at 100%. I flattened the logo in illustrator before importing into InDesign. When the pdf is created, the blue background of the logo drops out and the only thing showing is the graduated screen of black. PLEASE HELP!!!!!!

Thanks for your reply Peter,
I'm on Mac OSX (10.5.8) using Acrobat 7 Professional and Acrobat
Reader 9 to view the pdf. I created it by exporting. Attached is a
screen capture of the letterhead. Since I posted, I sent a test pdf to
my partner's computer eventhough it didn't look right on my system and
she said it looked fine to her. I've restarted my computer and tried
again and still get the same results.
Thanks for your help,
Pat Boullion
Boullion Graphics
281 444-5749
Fax: 281 444-6507
CONFIDENTIALITY NOTICE
The information in this email may be confidential and/or privileged.
This email is intended to be reviewed by only the individual or
organization named above.
If you are not the intended recipient or an authorized representative
of the intended recipient, you are hereby notified that any review,
dissemination or copying of this email and its attachments, if any, or
the information contained herein is prohibited. If you have received
this email in error, please immediately notify the sender by return
email and delete this email from your system.

Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.

Hello,
Suddenly the working CRM is being stopped for some group of users.
I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
But for other domain user having problem to access CRM.
I tried to add a user from a domain which is not of CRM domain then it gives following error.
"Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
<Message>LookupAccountNameW failed with error</Message> "
The change is made - AD group have upgraded Activer Directory server to 2012 R2
Please help as the Production CRM is not working for other domain user.

We have Activer Directory Structure like below.
One Root Domain says A
and there are multiple child domain like B,C,D etc...
B,C and D are all in same level,they are child of A domain.
There are two way transitive trusts between A and all the child Domain.
But there is no trust in between B and C and so on.
Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

Attempting to create a rollover in Dreamweaver

Attempting to create a rollover in Dreamweaver but when doing so the only way it works is if you approach it from the bottom and not all around. Please see code below and please advise if this is correct or if there is something i may need to change.
<div class="polibox"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image2','','images/PoliticianOneRO.jpg',1)"><img src="images/politicianone.jpg" width="142" height="142" id="Image2" /></a></div>
Thank you.

More often than not, these kinds of symptoms are the result of partial masking of the rollover by an absolutely positioned element. Are you using absolute positioning on the page?
For sure, though, the only way someone can diagnose this accurately is to actually see the page and its underlying code. Can you post a link to the page, please?

Completed a project in iMovie which is 41 minutes long (2 GB) . When I attempt to create a iDVD disk(via clicking on share) ,I am advised that an error occurred because the project is too long. Have made other movies/created disks that are longer than 41

Have completed a project in project library that is 41 minutes long ( 2.1 GB ) . When I click share and attempt to create an iDVD disk , an error notice appears claiming the new project is too long. Have created other iMovie/DVD disks in the past which were longer than 41 minutes. What corrections do I need to make to ensure I can create a DVD disk for this 41 minute ( 2 GB ) project... I am using a 17 MacBook pro for this project.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

When attempting to create an SSRS Report in SharePoint 2010 Dashboard Designer and change the Server Mode from Report Center to SharePoint Integrated

Hi,
When attempting to create an SSRS Report in SharePoint 2010 Dashboard Designer and change the Server Mode from Report Center to SharePoint Integrated, I get the following unhandled exception:
************** Exception Text **************
System.InvalidOperationException: There was an error generating the XML document. ---> System.InvalidOperationException: Instance validation error: '2' is not a valid value for Microsoft.PerformancePoint.Scorecards.SqlReportViewData.SqlReportViewDataServerMode.
   at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write1_SqlReportViewDataServerMode(SqlReportViewDataServerMode v)
   at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write3_SqlReportViewData(String n, String ns, SqlReportViewData o, Boolean isNullable, Boolean needType)
   at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriterSqlReportViewData.Write4_SqlReportViewData(Object o)
   --- End of inner exception stack trace ---

Hi,
According to your post, an error occurred when you integrate SQL Server Reporting Services with SharePoint.
1. Please check the steps as the link below:
http://technet.microsoft.com/en-us/library/ff724283(v=office.14).aspx
2. Try to clean the configuration cache on all of your SharePoint servers and re-tested.
http://blogs.msdn.com/b/josrod/archive/2007/12/12/clear-the-sharepoint-configuration-cache-for-timer-job-and-psconfig-errors.aspx
Best Regards
Dennis Guo
TechNet Community Support

I am attempting to create a pdf

I am attempting to create a pdf on monthly Acrobat fee which expires end December. But the icon is greyed out and I am unable to create the doc.
I want to do it before myh monthly fee runs out!
Tks

Have you signed in? Did it used to work?

I'm currently attempting to create a 2D scrolling map based on GPS co-ordinates

Similar Messages

Maybe you are looking for