I'm currently running NMS4.15p7 and it is quite stable. What would be the advantages to go for iMS 5.1?
You'd want to review the IMS Release Notes and documentation for a complete picture of what's different in IMS. There are a number of things that jump out though.
Aside from NMS nearing the end of its life-cycle, IMS is more stable. It's built on a foundation of both Netscape Messaging Server and SIMS.
It includes server-side rules that can be selected by a user to apply to their mailbox or by the administrator to apply server-wide, using the very flexible SIEVE language.
You can also easily integrate other software such as a virus scanner by using the conversion channel. You can filter MIME-Types, scan message bodies, and so on.
In 5.2, you'll be able to use the Webmail Multiplexor similar to the POP and IMAP MMP in 4x. Domain hosting, user provisioning, security and message store management are far better in IMS.
IMS is also the go-to product if you're looking for a Unified Messaging solution or expecting to scale-up your current deployment.
There are dozens of other benifits to IMS, but there are too many to list. The best way to decide if it suits you is to read through the Admin Guide and possibly the Provisioning Guide and then install it in a test environment yourself to really feel it out.
The learning curve for IMS is a bit steeper as it is a more complex product and there are more components to interact with and configure. You will have to thoroughly read the documentation available and do a trial installation and deployment before using in the real-world. But once you get over that bump, it's a very powerful server.
Similar Messages
-
How do I get an SVG file to the same color profile as my illustrator file (U.S. Web Coated (SWOP) v2 and what would be the correct color profile for printing on a shirt?
Thank you.dadanas wrote:
Hi Simcah, I have a similar problem. Have you found out any solution?
thanks, dan
You need to ask the printing service provider. Dealing with color totally depends on the printing process involved and of course the machines used. -
hi i have an ipad 2 and i have made a password but have forgotten it and it has disabled it.what would be the best thing to do?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
i have a mac 27 inch computer and i woul like to know which multi function printer would be the most compatible with my mas osx 10.68 computer
Well, I am attending Academy of Art University in San Francisco, CA. I am an online student receiving my BFA. Afew months ago I received my Associates degree in Internet Specialist/Web Design at another college where I live. I just started at AAU so the only classes I've had so far are Illustrator and a design theory class. Well, the Illustrator class we've created many different things, from 3D characters(which is the assignment he had to cancel cause none of us had atleast 8GB of RAM), we've used live paint, messed with different brushes and symbols and vectors and all. We haven't gotten into the "Web Design" portion yet in this college. But from my other degree, I had to take C+, Photoshop, Flash, Dreamweaver, PHP, HTML, XHTML, CSS, we worked with Linux, Notepad++, and many other things. I absolutely love my Web Design career I have chosen and it's even better since I started at AAU.
As far as the books, I haven't really used my books in these classes because he puts up video tutorials and lessons for all of us to download and watch. -
I have been doing lots of work on final cut and want to know how some of you maybe starded doing work for others to make $
.. just to add my 5¢:
There're several ways to moneytize your editing skills.
● freelance editor:
Indeed, then first question of any client is "What apps do you handle?" I dare to say, depending in what area you live, those huge fabs searching for freelancers use very little FCPX; here, they're looking for Avid, GVproducts, maybe FC/pro...
● one-man-slaughter-houses aka Wedding-photographer
If your skills are beyond editing-only, and you're an (excellent) DoP, for sure offering your 'products' is the obvious; Weddings, Bar Mizwahs, Funerals, Services, lectures, workshops, company image movies, demoes, exhibit videos... But, as other mentioned: nobody is intersted with what tools you create the film; only results count; in private products, lots of 'eye-candy' gives a happy bunny customer
● 'Yellow Pages': I'll make you a movie...
I'm not doing that professional, but occasionally for money: people ask me, to grab a harddrive full of 'files' to create 'a nice movie', lately two 'flat' birthdays (30/40), tons of pics, shakey iPhone messages, music, dissolves, done. - nothing for living...
● Teaching?
teach other your skills, have a look here http://training.apple.com/act
Hurdle to go for all those: hen-egg-dillema
People want to see your skills in advance; but without jobs, nothing to see yet. -
Hi
Can anyone give me some useful information on the best ways to design and build a database/booking & dispatch system that can be intergrated through ical, address book and available on my macbook, ipad & iphone and all accessed through icloud.
I started my own chauffuer Service a year ago as an independent. it's becoming a massive bore that most of my time is spent taking down information, checking if i am available for clients and with alot of diary checking and repeatative entries and email ping pong and invoicing, what i want to do is concerntrate on advertising and marketing and using my time off for R & R
What i would like to do is access my information in an app and automate most of the processes like
assigning the job to the client with intergration through iCal and Address Book
be able to email confirmation through mail with an invoice produced through numbers or excel
payment is already done through payleven mobile and must be done in person so i'd rather keep that seperate to all processes apart from a tick box to say it has been paid for.
I have been looking at all options FileMaker, Bento, Automator, Apple Script. to be frank im no expert and am a little confused as to what to do any advice would be greatly recieved.Hi,
I would suggest that is going to be an involved and complex process.
I would personally look into some of the invoicing and time scheduling software available and see if any fit your needs.
Take a look here: http://www.tuaw.com/2008/07/30/app-roundup-timekeeping-and-billing/
and here: http://www.tuaw.com/2008/07/31/app-roundup-timekeeping-and-billing-part-ii-the-q uickening/
for starters.
Best wishes
John M -
I need to update my Mac OS. Currently it's using os 10.5.8 version what would be the next version I need to install? Thank you for all your help.
You need to buy a Mac OS X 10.6 DVD, install it, and run the 10.6.8 combo updater. Mac OS X 10.6 requires a Mac with an Intel CPU and at least 1GB of RAM.
(94922) -
Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.
Hi Tech5Apple,
Thanks for visiting Apple Support Communities.
If you continue to see unexpected behavior when accessing the iTunes Store, the troubleshooting steps in this article can help:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
All the best,
Jeremy -
I have a MAC Pro from 2011 currently running MAC OS 10.9.5. This weekend I cloned the MAC HD drive to a new SSD drive for improved performance. The clone was completed successfully with no errors. After the clone completed I successfully restarted my system using the SSD as the boot device. I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins. I successfully tested the key features that I frequently use. Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found. All drives are available on the system via the Finder and Disk Utility. I can access all drives including the old MAC HD which is no longer the boot device. I've even attempted to launch Photoshop from the old device yet the same error persist. Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch? I've even restarted my system several times to see if that would resolve the issues. Does anyone have any recommendations for this issue? Have you previously address this issue?
Thank you Gregg WilliamsBoilerplate text:
Reset Preferences
http://forums.adobe.com/thread/375776
1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
or
2) Move the Folder. See:
http://www.bugge.com/Family-and-friends/Illy/illy.html
--OB -
My laptop running XP sp3 and FireFox 3.6 died. I salvaged the HD and put it in a drive enclosure. I bought a new Win7 machine and wish to import my old favorites (I don't have a backup, but the Favorites folder on the old HD is intact). I have not been able to determine how to import these favorites from the old HD to the new machine. I haven't found any FAQ that addresses this since I can't really start Firefox on the old HD in order to make a HTML backup. Any ideas? edit
See this: <br />
http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile -
I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
PLEASE HELP ME I AM FACING A PROBLEM
My name is Ameer.
I watch youtube videos from ipad2 ( safari )
today for my first time, when i run a video and i want to pause it, i touch the screen where the video is playing to reach the pause botton that is located on a bar under the video which appears when i touch the screen. Today every time i touch the screen nothing happens and i cannt pause the video nor adjusting its quality.
So plese help me fixing this problem as soon as posible.
RegardsSame problem on my ipad mini, running ios 6.0.2.
A bit more info:
-tried using YouTube in Safari on another ipad. Worked fine.
Tried reboot (sleep + home buttons for 15 seconds). Didn't fix.
-tried logging out of my YouTube account, thinking the problem was tied to my settings. Didn't fix.
-tried uninstalling all apps I downloaded since the last time YouTube worked properly. Didn't fix.
-tried watching a video in desktop mode. Can tap video screen to bring up pause okay in that mode.
There are work arounds, but the thing I want to know is why YouTube doesn't work in Safari as of a couple of days ago, and is it indicative of another more serious problem with my ipad. -
I have a problem to update iMovie 9.0.9. The OS is running really slow and halts from time to time. In the update procedure it says it's one minute left. That was one hour ago... What can I do?
I have a problem to update iMovie 9.0.9. The OS is running really slow and halts from time to time. In the update procedure it says it's one minute left. That was one hour ago... What can I do?
-
I have a desktop MAC OSX Leopard. I want to upgrade to Quicken 2007, install Snow Leopard, download iLife'11. I heard that Quicken and Snow Leopard can clash..........that is why I am upgrading Quicken. What would be the best order of installing these products. I have gotten defferent opinions and I want to be sure I install them correctly.
Thank You.First, install OS X, then install your third-party software.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal
startup drive.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before installing the
update unless you will boot from this drive and install the update on it.
Reconnect it and turn it back on after installation is complete and you've
restarted.
2. You may experience unexpected results if you have installed third-party system
software modifications, or if you have modified the operating system through
other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other
interruption occurs during installation, use the standalone installer (see below)
from Apple Downloads to update. While the installation is in progress do not use
the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
6. Follow instructions.
After installing Snow Leopard you should update it by downloading and installing Mac OS X 10.6.8 Update Combo v1.1. -
We have multiple devices in our family. On each iPad/iPhone each user has their own apple id for iMessage, Facetime and icloud, but we all sign in to the same apple id for itunes. When one of my kids comments on my shared photostream, it shows my name and not theirs as the commenter. How do I fix that?
CREATE A NEW USER
Go to System Preferences --> Create a New User in Users & Groups
Decide on whether to setup as Admin or Standard User.
Switch to the New User by logging out under the Apple in the Menu Bar or use Fast User Switching
Fast User Switching allows other users to leave current applications and windows open. Depending on RAM, you might need to log out rather than use FUS.
Maybe you are looking for
-
IPad App Store won't let me download apps
iPad App Store not letting me download apps anymore?!?!?!
-
Unable to find data visualization component in JDEV 11g Preview 4
we have installed jdev11g preview 4 and we are unable to find ADF data visualization component. Is there anyway we could add this component. Thanks in Advance Sabir
-
"untrusted server cert chain" exception while connecting LDAP server
While connecting to LDAP server using JNDI over JSSE ..This is happening when trying to get the initial context using InitialDirContext initContext = new InitialDirContext(env); where env is a hash table set with the default parametes.The certificate
-
HP 2311x monitor connecting to HP G60 laptop
I have a HP 2311x monitor that I would like to connect to my HP G60 laptop. Monitor is showing 'no connetion signal' and goes to sleep almost immediately. 1. Is it possible to set these two up for connection? 2. How do I connect? Thanks!
-
Quicktime Share Video Options Grayed out
In Quicktime X, I do not get the options for sharing video for Apple TV or Computer, only get the Iphone option to choose. I was still able to convert and save it to Itunes though and see the video on Apple TV. Any ideas?