I m facing problem regarding 655 movements type.i m not activate qm view fo
Dear sir
I m facing problem regarding 655 movements type.i m not activate qm view for that material . still i m getting lot . plz help me
Go to VOV6.Remove movement type 655 for schedule line category DN and assign movement type 651.(If you are using other than DN for returns, assign there.DN is standard)
Vishal
Similar Messages
-
I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.
Thanks for you reply.
But actually I don't want to show the \ (backslashes) to the user in my text box.
Ok let me elaborate this problem little more.
I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark).
Regards,
Waqas Ahmad -
Movement type 647 does not currently support serial numbers management
we can't do "shipment start/PGI for DOWN shipment 1178184 DN# 40309339.
Error message " Movement type 647 does not currently support serial numbers management" see also attachment
Error is like that
Stop : Save Shipment
Stop : Shipment 0001178184 :Action for Shipment start
Read Activities profile ZPGI
Main issue
Stop: Movement type 647 does not currentely support serial number management.
Delivery 001114455 in shipment could not be posted GI
Ssome problem with the movement type 647.
what I understand is, its a SD movement which place the material in transit and automatically executes
the 101 movement. If possible please help in this matter.
Pls help what exactly issue and resolution .
Regards
VickyCheck this thread
[STO with delivery in 1 step (mvt. type 647) with serial numbering |STO with delivery in 1 step (mvt. type 647) with serial numbering]
thanks
G. Lakshmipathi -
Movement type 101 does not currently support
Dear Experts
there is an error occur at the Time of MB31 with 101 Movement type
Movement type 101 does not currently support serial number Management.
Rgds
PankajHi
Serialization config is missing for 101.
Check in below config
spro>plant maintenance & customer service>master data in plant maintenance & customer service->technical objects>serial number management-->define serialization attributes for movement types
Check with the help of PM or CS consultant
Regards
Antony -
JITOM error movement type 000 is not allow (check your entry)
Hello experts,
In transaction JIOM i try to do an ACTION, but the system display below error message.
movement type 000 is not allow (check your entry)
Could you please help me this is very urgent..
Regards!!
HugoHello Hugo,
Can you clarify what the functionality of transaction JIOM is? I am assuming that this is your own transaction? Going from previous cases of error L3001 being raised, this is almost always associated with the creation of TO documents, can you confirm this is correct?
Can you check that the Item category is relevent for picking? (Transaction 0VLP)
Regards
Stephen -
Customize Movement Type : Reverse is not update the Serial No Status
Hi All,
Customize Movement Type : Reverse is not update the Serial No Status from ECUS to ESTO when reverse Delivery Order movement document.
Mind to guide where to check this configuration problems.
Thank you.Hi All,
For the Customization Movement Type, Initial plan is copy from 602 but found out below different on Trans./ev serial no. Not sure the problems is from this site > How to change the configuration. -
Movement type 311 is not planned in Back Ground Processing
Hello,
I have created a BDC to run the transaction "MIGO" with movement type 311.
Its working fine in foreground. But i execute in Background i am getting a error message "Movement type 311 is not planned for this operation".
I think there should be some config settings. But i don know where to check configuration ?
If anyone has any sugggestions or answers , Pls post here.Hi,
Better you can use the BAPI "BAPI_GOODSMVT_CREATE".
Check with your Functional Consultant for this issue......
You may also look for an OSS note and in Last raise a ticket to SAP..but there is no surety that every txn will work with BDC in Background Mode. -
Movement type 101 does not currently support serial
Hi experts,
I'm trying to realize MIGO for a PO with a material with serial number.
The error msg is " Movement type 101 does not currently support serial number Management." IO306
I already config. spro>plant maintenance & customer service>master data in plant maintenance & customer service->technical objects>serial number management-->define serialization attributes for movement types
And
Plant Maintenance and Customer Service -->Master Data in Plant Maintenance and Customer Service -->Technical Objects --Serial Number Management -->Define Serialization Attributes for Movement Types
And assigned the material to attributes ate MM02.
I have know ideia what else i have to do.
Is there anone here already see that?
Tks
Antonio Oliveiratry posting GR via MB01 transaction instead of MIGO and let us know if you are getting same issue.
also there are few OSS notes created for this kind of issue which has to do with maintainenance of table V_T156SY, check below thread
Movement type 101 does not currently support
yogesh -
Movement type 317 does not currently support serial number management
Movement type 317 - support serial number management?
We are using SAP ECC 6.0. and trying to create a structured material from constituent components with the WM 317. The components are using serial numbers. When we try to post the material document we get an error message:
u201CMovement type 317 does not currently support Serial number managementu201D
Movement type 317 does not currently support serial number management
Message no. IO306
Diagnosis
With the help of * under the business operation, the entry in table T156S used here under movement type 317 defines that no serial numbers are supported here.
System Response
Termination of the transaction called up.
Is any new availability which support serial number management in warehouse movement 317?Is the scenario relates to Retail ?? Movement Type 317 is used for Creation of a structured material from constituent components (Retail). Check Note 131969 - Recommendation: Store returns in SAP Retail Release 4.0
thanks
G. Lakshmipathi -
"Movement type 123 is not planned (Entry is not copied over)".
Dear All,
While executing Movement Type 123, for reversal of a vendor return i get an error message "Movement type 123 is not planned (Entry is not copied over)".
Transaction used : MIGO
Goods Receipt | Purchase Order | Movement Type 123
Any specific reason as to why the system is not allowing me to execute the movement. And what is the procedure to overcome this error.
Shall await your reply
Thanks
Shabeen Buharydear shabenn
It is absolutely true, you can perform 123 movement i .e. cancellation of return delivery only through reversal procedure of movement type 122.
If you are trying to do MIGO for 123 movement, the system supposed to throw out same error.
If you returned a goods receipt using movement type 122, you can reverse the return delivery using movement type 123. This movement type has the same effects as movement type 101.
Please revert back if any query still exist...
Rahul -
Movement type 124 does not currently support serial number management
Movement type 124 does not currently support serial number management
when I post goods return in qa12, the system shows movement type 124 doesn't support serial number.
Could anyone can tell me where I can set the movement type for serial number?
JohnUnfortunately it is impossible to post a return delivery from the usage-decision for a material with serial number profile, which is in goods receipt blocked stock. This is is missing functionality
The possibility in the standard would be the following :
1. Close the inspection lot. Please do the stock-posting in a way, that you post to 'GR blocked stock'. Remark : No physical is done. This is only necessary to achieve, that status SPCO is set.
2. Post the reutrn delivery with the MM-IM-transaction (e.g. MIGO).
Please check, if this is possible. -
I am facing problem in using viber...can not receive any call from Viber whn keypad is locked and whn i unlock phone thn on opening viber i can see the missed call notification... kindly guide me there is any setting so0 tht i can receive viber calls whn my phone is locked even as i can receive calls on HTC
Hi,
This is an official representative of Viber Media.
Unfortunately we cannot change this feature due to Apple's restrictions. :/
For more questions or technical support, please visit our official HelpDesk.
Thanks,
Viber -
Hi ...
I have a problem with my ipod touch:
I can not activate my ipod with my Apple ID, it tells me that my account can not activate this device, but my apple ID is OK.
The proposed me as ipod help entering previous credentials, but the ipod is mine from the beginning, in fact I have my ballot, not bought down to another user.
Actually I do not know how to activate it in Chile were unable Store MacOnline solve my problem, it is for this reason that I am writing to see if someone can help me.
PLEAAASEEE
Thank you.
SebastianThanks for your answer.
actually, my ipod will not let me activate it with apple id, this happened when the new iOS acutalizó understand that has more security, but do not know what to do. -
Customer return - 655 movement type - stock posting reversal after UD
Dear All,
I have done customer return using movement type 655. Quality lot has been generated & I have processed the lot mean given the UD for the same lot and qty has been posted to Unrestricted stock. I have done wrong receipt ( Customer return).now I want to reverse process.
Please guide me what to do in this case?
Thanks & Regards
Kundan KumarHi
1.If You have done usage decision for the lot.
material is no more in QI stock.You can bring back that material to QI by 08 Type of inspection only.
2.But if you want to reverse Mvt type 655 then,
T-code
656 VL01 Create Delivery
656 VL01N Create Outbound Dlv. with Order Ref.
656 VL01NO Create Outbound Dlv. w/o Order Ref.
656 VL02 Change Outbound Delivery
656 VL02N Change Outbound Delivery
656 VL03N Display Outbound Delivery
656 VL08 Confirmation of Picking Request
656 VL09 Cancel Goods Issue for Delivery Note
Go to Tcode OMJJ
Enter Mvt type 656
Check the setting for this Mvt type.
Regards
Sujit S Gujar -
Facing Problem Regarding UTL_SMTP
Hi Tom,
i have a program(PL\SQL code) which dynamically picks up the mailhost, generates the To list and from list and constructs an attachment of iREC external applicants and mails it to HR Manager.But the program is getting error like below just after the construction of the attachment.
ORACLE error 29277 in FDPSTP
Cause: FDPSTP failed due to ORA-29277: invalid SMTP operation
ORA-06512: at "SYS.UTL_SMTP", line 43
ORA-06512: at "SYS.UTL_SMTP", line 279
ORA-06512:
Affected line : marked by * (Code logic Flow)
-- Construction of mail body ----
-- End of mail body---
--- Attachment Constructed using UTL_SMTP.Write_data ----
--- End of attachment portion---
IF e.request = e.request_endOfText THEN
-- i.e. when the email bosy comes to the end.
*UTL_SMTP.write_data(e.mail_conn,''||CHR(10));
UTL_SMTP.write_data(e.mail_conn, '--'||e.separatorId||'--'||CHR(10));
UTL_SMTP.close_data(e.mail_conn);
UTL_SMTP.quit(e.mail_conn);
END IF;
but while i'm running the same code by providing the to, from and mail host name hardcoded the program is executing smoothly and sending mail as well.
The code runs fine on the other instances but in my instance is gets error out.is this a problem regarding the UTL_SMTP settings in my instance?
I couldnt find any valid reason for this error.would you please help regarding this?
P.S. it's bit urgent.Tom is out chasing Jerry.
And how about showing some comprehension ability in addition to the ability to read.
Read the title of the forum again.. slowly..
Now what is it that you fail to comprehend? Do you understand the bit in the title that reads Do Not Post Product-Related Questions Here?
PS. How urgent? Urgent as in house-is-on-fire-urgent? Or a clueless-do-not-know-cannot-read-the-manual-and-cannot-read-the-forum-title-either urgent? If the former, contact the local fire department. If the latter.. you're in the wrong place.
Maybe you are looking for
-
10.5.8 Server Software Update Server and 10.6.4 clients getting error
I'm running Software Update Server on an Intel XServe 10.5.8 OS. When I try to run software update from 10.6.4 client I get the following error: +The Software Update Server (su.MYSERVERNAME.org) is not responding.+ +Check to make sure your network co
-
Can I clone my HDD to a new HDD without buying an external enclosure?
Sorry to start a new thread, I can't seem to find a solution to my problem. I have a new 250gb hard drive that I want to swap out w/ my old overloaded 80gb in my Powerbook (running 10.4). I also have a 3.5" USB external hard drive that I have my user
-
Hi- I'm trying to install xcode 2.5. Idon't know what to do w/.exe file downloaded from the apple developer website. I would like to be able to use AU Lab but my developer folder only has extras/palettes inside- no applications or tools. Thanks
-
HOW TO CALL A PACKAGE VARIABLE INTO ODI
Hi, Please help me with a solution for capturing a variable from a package into odi. I have seen the solution given by cezar in odiexperts.com but we are not looking for a package creation thru odi. Please suggest any other method. Thanks Venkat
-
Line Chart report issue in BAM
Hi, I have a view from my database on Daily Sales. I tried to make a line chart report.I had the data object & plan created and run. I am facing some issues while making out: 1)In Line chart it looks like "Summary Function" in chart is must. 2)All th