I'm finding apple tv hateful.  I can't get the volume to work, I can't get anything shared from my laptop or desktop, I can't really deal with a remote that seems to do so very, very little.  I got passwords, ID's in, but now this is only a clutter box.

I believe I have Apple TV installed, but with no functionality.  Was able to select a TV show but with voice from another show--couldn't ever get rid of that voice or do any volume changes.  I have sharing set in itunes but can't get any music.  Can't access any streaming from laptop, iPad, or desktop--all on same network. 

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Similar Messages

  • HT3775 I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you.The document "IMAG0026.AVI" could not be opened. A required codec isn't available.

    I get the following message when trying to open an .avi downloaded from my video cam, need help, can not find the codec, thank you. This is for Quicktime Player.
    "The document “IMAG0026.AVI” could not be opened. A required codec isn't available."

    Try Perian.
    http://perian.org/

  • TS3274 How can I get the volume to work?

    We have an iPad but can't get the volume to work?

    Alright now if you are talking about issues using Safari, here a few things that you can try.
    1. Quit Safari completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. Clear Safari. Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

    I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

    do u have your ipad doing airplay because that could happen

  • I can't get the volume to work when I use firefox. It does work on internet explorer. What is going on?

    I downloaded firefox in order to do some online training that I couldn't open in any other browser. I can't get the volume to work in this browser. I can use internet explorer and the volume works. But I can only do the training through firefox.

    You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
    You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
    Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
    You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.<br />
    See also:
    * https://support.mozilla.org/kb/No+sound+in+Firefox
    * https://support.mozilla.org/kb/Video+or+audio+does+not+play

  • I can't get the volume to work on my ipod. works only with the headset in. Thanks

    Hello I can't get the volume to work on my ipod touch. Only works witht the headset. Thanks

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • TS4036 Help,  I get this messafe on my Ipad: "" this ipad hasn't backed up in 13 weeks, Backups happens when this ipad is plugged in, locked,and connected to wi-fi""   i can get the ipad to work... it is stuck??????  what can i do?

    I get this messafe on my Ipad: "" this ipad hasn't backed up in 13 weeks, Backups happens when this ipad is plugged in, locked,and connected to wi-fi""   i can get the ipad to work... it is stuck??????  what can i do?

    A reset should help. Tap and hold the Home button and the On/Off button for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons and await restart.

  • How can I get the volume to work on my ipad after the iOS 7.02 update?

    The performance of my ipad plummeted after the iOS 7 and 7.0.2 updates. The apps crash and some do not work at all and worst of all, my volume does not work at all. Is there a way I can at least get the volume to work?
    I was planning on purchasing a MacBook Pro but with all these issues I am reconsidering.

    I have tried changing the volume both by using the volume buttons on the side and through settings.  I have updated all the apps. Closed and reopened a million times hoping it was just a one time deal but I have had continuous problems since the update on my ipad.
    I love the update on my iphone but for some reason the ipad did not adjust well.  I really would like to get it fixed because I love my ipad but there is no use when the apps an volume do not work.

  • How can I get the volume to work?

    I cannot get the volume to work on the Nano 7.  Does anyone have any tips?

    I have tried changing the volume both by using the volume buttons on the side and through settings.  I have updated all the apps. Closed and reopened a million times hoping it was just a one time deal but I have had continuous problems since the update on my ipad.
    I love the update on my iphone but for some reason the ipad did not adjust well.  I really would like to get it fixed because I love my ipad but there is no use when the apps an volume do not work.

  • HT4759 However, having a windows XP is not supported... how am I supposed to get the photo stream working on iCloud? I guess that is not a priority for Apple?

    I have an iPod touch 4th generation, which is exactly what I wanted for a wifi supported multimedia device. I am trying to get the iCloud to work properly and despite of everything else working smoothly, I cannot seem to be able to get the Photo Stream working, in order to get the backup on iCloud. I tried to download the control panel and realised that it only supports the Vista SP2 and higher on Windows. Is there another way to get the settings on iCloud to include the photo stream?
    Thank you.

    Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases".  You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information.  This should be checked on a frequent basis  as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

  • Can I use the volume sliders after adding automation to tracks?

    After adding a whole bunch of automation to pretty much every track on my first real project on GarageBand, I started trying to mix, and it seems the volume sliders are all locked up on the tracks with automation. I really don't want to have to add a million more automation points just to mix the song properly, so if anyone has a solution, that would be greatly appreciated!
    Thanks!

    Can I use the volume sliders after adding automation to tracks?
    no
    if anyone has a solution
    you can select all the points by clicking in the header, and then drag them, though

  • Can't get the software to work with Audigy 2

    Hi, I have had my Audigy 2 ZS going on a year now and haven't had any problems. I recently made a clean install of Windows XP and upgraded to SP2 and all that. Now, I can get sound out of the card but can't get the software to work at all; cannot get the volume slider bar to appear when I click the icon (it appears in the task bar though and I get a small gray square where the slider should appear), the surround mixer does not show when I double click the volume icon, EAX conxole is a no go, get an empty error box when I try to start the Equaliser.
    I have tried everything from simple re-install to clean sweep to praying to the pagan gods. I have alsoo tried updating the drivers of course.
    I run XP on an Intel MoBo (on-boeard sound deactivated), 52RAM, ATI 9700 ALL-IN-WONDER.
    DOES THE CREATIVE SOFTWARE DEPEND ON ANY WEIRD LITTLE WINDOWS SERVICE OR SETTING THAT I MIGHT HAVE CHANGED DURING SETUP?
    This is quite infuriating as any idea I come up with takes up a lot of time in installation, uninstallation and clean up. It worked before, why not now?
    Thanks in advance. dentore

    Ok I got it to work. This is the reply I got from Creative but I didn't remove the program from the add/remove option on the PC b/c that didn't work at first. I inserted the installation CD and remove it from that wizard. Rebooted and the PC found new hardware. I then installed the driver and software from the CD and now it works.
    For Mediasource. It appears something was corrupted in Mediasource or there is a conflict within the system.Please uninstall all software and drivers for the soundcard, from add/remove programs. Once this is done, shut down the system and changePCI slots for the soundcard, then turn the system back on, cancel the found new hardware wizard, disable all background applications (especially virus scanner, firewall, and any other background applications running in the bottom right hand corner of the system), andthen perform a full reinstallation of the drivers and software from the soundcard installation cd.
    CAT I hope you fix your sound card. Good luck.

  • My laptop died, how do I access the music I downloaded on there?  I'm not sure that sharing was set up on it.  Is there a way to recover all that music?  (I'm not very technically savvy!)

    my laptop died, how do I access the music I downloaded on there?  I'm not sure that sharing was set up on it.  Is there a way to recover all that music?  (I'm not very technically savvy!)

    check out this post by Zevoneer.

  • HT1048 I ordered a book prom iphoto, and it was support to cost 610 NOK. but apple withdrew the amount 3 times from my acconu. how do I get the 1220 NOK back. who do I talk to or send e-mails to? I can't find any information. thanks!

    I ordered a book prom iphoto, and it was support to cost 610 NOK. but apple withdrew the amount 3 times from my acconu. how do I get the 1220 NOK back. who do I talk to or send e-mails to? I can't find any information. thanks!

    Greetings,
    Contact the Apple Online Store in your region (which I believe is Norway): http://store.apple.com/no/help/contact
    or
    http://support.apple.com/kb/HE57
    Cheers.

  • I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

    Hi
    I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
    TY!!!!

    Kline25 wrote:
    So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
    Apple does not repair devices beyond replacing the screen on some models or a battery replacement.  They replace the ENTIRE device.
    For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device.  Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
    Apple will not touch the device now.  They will know that it was opened elsewhere and that the replacement screen is not original.

Maybe you are looking for

  • How can I "search" for Library Items?

    I am developing a site in flash and have over 800 Library Items. My problem is, I need to edit a portion of a Library Item and cannot find the Library Item, and NO, I did not delete the Library Item because when I go to preview or test the flash docu

  • Belkin USB Switch Problem

    G'day I have Mac OSX (10.4.6) operating on an iMac with a 2 plug Belkin USB switch that connects to a HP PSC 2210 printer and a Dell running XP. The iMac shows the Belkin switch icon in green and will print with the Dell showing the Belkin switch ico

  • Webi refresh from Excel

    Hi All, I have created a universe based on an Excel file with columns as Material Number, Order Qty, Status and am reading this data from a Webi report. The data seems to be showing correctly the first time I create this new Webi and read data. If I

  • Oracle Client 10.2.0.1 and Server 10.2.0.3

    Hi, is it possible to connect with Client 10.2.0.1 to Oracle Database which runs under 10.2.0.3? I just need a client to create a tnsnames.ora on the client-pcs. Greets Alex

  • Sending external email via SAPCONNECT

    Hi all, I want to know how to send external email through sap. Thanks in advance, Manosh.