I'm getting a 1048 error after upgrading MATLAB.

Hi-
I'm hoping someone might be able to help me.  I have a VI that I've been using w/ no problems that has several MATLAB script nodes.  Recently, MATLAB was upgraded on this machine from 2006b to 2008a.  When I try to run the VI now, I get a 1048 error when the MATLAB script tries to execute.  (I'm not clearing any variables or giving them the same names as existing MATLAB functions.)  I'm currently running LabVIEW 8.6.  Any ideas?  I've tried just shutting down LabVIEW & restarting w/ no luck.  Thanks in advance!
Erin

Hi Erin,
Usually ActiveX registration issues will cause an error 1047.  But you could try reregistering the ActiveX components.  
Take a look at the following KB:  Why Do I Get Error 1047 When Trying to Use The MATLAB script node in LabVIEW?
Let me know if this helps at all.
Justin Parker
National Instruments
Product Support Engineer

Similar Messages

  • I'm getting a cwinstr error after upgrading from labview 7.0 to labview 2010

    Hello
     recently upgraged a PC from Labview 7.0 pro to Labview 2010 pro. Now I can not open a calibration executable we been using for a xantrex xfr power supply (unfortunately I don't have source code). The only error I get is "cwinstr-can't load program" pop-up when trying to run the executable. The calibration SW will run on multiple platfroms, Win 95, Win 200 0 and XP and this is the first time getting this error. The calibration SW ran fine until the Labview 2010 install. My question is does LV 2010 change the registry files when loaded? Visa and MAX still run fine on this PC and were loaded when LV 7.0 was installled. I know the calibration SW uses the VISA drivers so this is what's confusing. i don't want to downgrade back to LV 7.0  unless I have to.
    Thanks

    Hello Tanya,
    I'm a little confused here. i only started having issues with the executable (it ran previously with the visa drivers from 7.0) after I loaded LV2010. After the install, the exectuable started giving me the cwinstr error. As best I can tell, this may be an activex issue, but since I only have the executable it hard to tell.
    My question id do i have to install both labview 7.0 in addition to labview 2010 on the pc. Fom the the readme file, it looks like Labview 2010 won't support certain vi's older than 8.0. But since I'm dealing with an exectuable only here, I thought I  should be able to open it at least.
    So instead of updating the visa drivers, should i re-install the old visa drivers (Ni-Max) for 7.0 instead? would this even work without removing LV2010.
    Thanks Again

  • Flash 9,0,124,0 security error after upgrade

    I get the following error after upgrading my Flash Player
    (after my system prompted me to install it while running the Flash
    editor):
    Internet Explorer has blocked this site from using an ActiveX
    control in an unsafe manner.
    I have uninstalled and reinstalled the player from the
    browser, about 5 times now and it continues to be a problem for IE.
    Works ok in Firefox if I manually download the FF installer. Is
    there a standalone installer for Vista/IE7 or am I forced to use
    the ActiveX installer which seems to have issues?

    Fix: Removed both (!?more than one?!) versions of flash
    player in my Programs and Features dialog, then ran
    uninstall_flash_player.exe, reset IE7 to factory spec, then
    reinstalled Flash from ActiveX. Seems to be working now.

  • Error after upgrading from  sap b1 pl 35 to pl 49

    hello sap experts 
    iam getting the following error after upgrading from  sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
    "Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
    regards
    Jenny

    Hello Jenny,
    You may check by supreuser account first to see if you got the same error.  If not, it probably just related to user authorization.  If yes, it must be a bug.
    Thanks,
    Gordon

  • What can I do if I get an internal power error after upgrading to Windows 10?

    QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
    AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
    First, you'll need to quickly set the boot options to Safe Mode:
    1. Hold the Windows key and press 'R' to open the run box.
    2. Type MSCONFIG, then press ENTER.
    3. Select the BOOT tab.
    4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
    5. Click Apply, then OK.
    6. Click Restart. (If prompted, click Restart anyway.)
    From Safe Mode disable the AMD Display Driver:
    1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
    2. Click Device Manager.
    3. Expand Display adapters to show the two display adapters.
    4. Double click AMD Radeon R9 M200X Series.
    5. Select the Driver tab.
    6. Click Disable, then click Yes to confirm.
    7. Click Close.
    8. Hold the Windows key and press the 'R' key to open the run box.
    9. Type MSCONFIG, then press ENTER.
    10. Select the BOOT tab.
    11. Uncheck Safe boot.
    12. Click Apply, then OK.
    13. Click Restart. (If prompted, click Restart anyway.)
    From Windows 10 started with the AMD Display Driver disabled:
    1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
    2. Click Device Manager.
    3. Expand Display adapters to show the two display adapters.
    4. Double click AMD Radeon R9 M200X Series.
    5. Select the Driver tab.
    6. Click Update Driver.
    7. Click Search automatically for updated driver software.
    8. An AMD driver should be found and installed.
    The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
    The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

    I'm having the same problem.  I got error message 21.  I went to apple store.  they are saying i have a hardware error.  Really, my phone was working before the update.  Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child. 
    Help please,
    I will be glad to go back to the older software update

  • Unable to  get the login page after upgrade from 11.5.10.2 to R12

    Hi ,
    We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
    Pls let me know if someone has come across this issue.
    Thanks&Regards,
    Apps DBA

    Hi ,
    After compile JSP files manually , now we are facing problem after logging.
    Error : You have encountered an unexpected error.
    Thanks&Regards,
    Apps DBA

  • How do i get back my ringtones after upgrade

    I downloaded some ringtones after I upgraded my phone to Ios 6 then I restore my contacts using itunes then when i look at my ringtones after restoring it, all my ringtones and photos are lost. Can you help me get back my photos and ringtones please...

    With iPhone connected to computer:
    * In iTunes menu select "Store," then "Deauthorize Computer"
    * Then select "Store," then "Authorize Computer"
    * A message will pop up saying "X out of X Computers are Authorized" or something to that effect.
    * Sync iPhone
    * Restart iPhone, go to settings, sounds, ringtones. Purchased ringtone should be on top.
    Then you can get back your ringtones after upgrade.

  • Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

    Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

    Arghhhhhhhhhhhhhhhhhhh!!!!!!
    After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
    Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
    Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
    The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
    I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive.  But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
    How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
    Words, almost, fail me.

  • I am trying to link my PC to my Mac and Iphone and I pad. I can't use my Itunes account on my PC - when I try and enter Icloud on my computer i get a server error after I put in my e-mail and password.

    Question - Trying to use Icloud on a PC - I get a server error after I put in my e-mail and password. Why? I can sync up all my devices from Itunes with my MaC, Iphone and IPad but I can't do it with my PC

    I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

    Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
    My iphoto was working with photostream and now it will not connect at all.
    I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
    help!

    FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

  • On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. Yahoo was absouletly no help whatsoever; can you solve the mystery? Thanks

    On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. I tried uninstalling and reinstalling FF; no change. Yahoo was absolutely no help whatsoever; can you solve the mystery? Thanks

    HI Emmet,
    thanks so much for your posts back. I really appreciate it and yes that does help to know that you could not get it working.
    I did have some success, in removing the SSL Authentication checkbox in the smtp server settings - I found that this allowed my friend to be able to send mail from the mail app via his sbcglobal (yahoo) account.
    So that did help but of course the messages do not have ssl encryption and I'm not sure how big a deal that is for an individual. He is able to receive mail but unless the SSL authentication box is unchecked, he cannot send.
    i hope that helps anyone out there also!
    Thanks also for the tip about sparrow - yes I have heard of it and it is very popular, he may end up using that in the end.    
    Thanks again, much appreciated.
    Felix    

  • Getting a reistry error after installing telling me to reinstall itunes

    I am getting a registry error after installing iTunes and tells me that the drivers and data associated with importing CDS or Burning CDs cannot be recoginized and to reinstall Itunes... I have done this about five times now and have removed my computer of all traces of iTunes and am still getting this error. if someone could help it would be greatly apperciated.
    Thanks,

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • Error after upgrade CRS 4.0.4SR1 to 4.0.5SR2

    Hi,
    I've got some errors after upgrading my CRS 4.0.4SR1 cluster to 4.0.5SR2.
    First my publisher's status stay in "patch" status for near 2 days now. I'm not able to change anything in the configuration, i've got this message "Config Changes are not allowed during 'Patch' operation, which was started by  '_ccbu_build' at 'Thu Apr 08 04:31:04 CEST 2010 '. Please try again after  'Patch' is complete."(ERREUR02.jpg). How can I change this status?
    Then I've got errors in historical DB which is working but not on the publisher only on subscriber. How can I resynchronize this DB?
    Thanks for your help.

    Thanks Tammy for the reply
    We already tried the suggested SAP Note couple of time without any luck.
    Regards,
    SJ

  • Imac error after upgrade to 10.8.4

    I received an error after upgrade tp brand new imac.  Error was upgrade was not installed.  Upon reboot the version of SW in About thi Mac is 10.8.4.  Bug?
    iMac i7, 21.5" 16GB memory, fusion drive.
    Thanks for input.  I assume the upgrade took.

    Verify Permissions gave me some errors, I deleted the repeats and the permissions fixed lines:
    Repairing permissions for “Macintosh HD”
    Warning: SUID file “System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig” has been modified and will not be repaired.
    Warning: SUID file “usr/lib/sa/sadc” has been modified and will not be repaired.
    Warning: SUID file “usr/bin/quota” has been modified and will not be repaired.
    +++ (multiple repairs)
    Permissions repair complete
    I verfied the HD
    Much text (removed)...
    The volume Macintosh HD appears to be OK.
    I also loaded the Apple downloads version of the upgarde and received the following (again):
    The Installation failed
    The insatllation encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
    Message was edited by: Steve51K

  • Getting "Join in business component definition 'CG Opportunity My Accounts' has source fields that come from tables 'S_OPTY' and 'S_ORG_EXT'(SBL-DAT-00452)" error after upgradating to siebel Open UI 8.1.1.11

    Hello Team,
    We have upgraded from Siebel 8.1.1.3 to Siebel Open UI  8.1.1.11.
    But after up-gradation we are getting the below error in   "My Account Opportunity" View.
    We detected an Error which may have occurred for one or more of the following reasons:
    Join in business component definition 'CG Opportunity My Accounts' has source fields that come from tables 'S_OPTY' and 'S_ORG_EXT'(SBL-DAT-00452).
    Thanks,
    Tirupati Nanda
    Mob:-9742404115

    Hello Team,
    We have upgraded from Siebel 8.1.1.3 to Siebel Open UI  8.1.1.11.
    But after up-gradation we are getting the below error in   "My Account Opportunity" View.
    We detected an Error which may have occurred for one or more of the following reasons:
    Join in business component definition 'CG Opportunity My Accounts' has source fields that come from tables 'S_OPTY' and 'S_ORG_EXT'(SBL-DAT-00452).
    Thanks,
    Tirupati Nanda
    Mob:-9742404115

Maybe you are looking for