I'm getting an error on my SMTP server in mail

although the connection test is ok. I can't send any eamil using the SMTP server that my ISP has listed for my area

Of course we can't. You've provided absolutely no information for us to even begin to help you.

Similar Messages

Get message "Error creating account: Incoming server already exists."

trying to set up new IMAP account and get message "Error creating account: Incoming server already exists." Changed settings manually, but same error message.

''ScottNH [[#question-1040338|said]]''
<blockquote>
trying to set up new IMAP account and get message "Error creating account: Incoming server already exists." Changed settings manually, but same error message.
</blockquote>
I have been getting this too (for the last two days - on at least a dozen tries).
I am Running Win7 and already have three POP accounts.
All definitely have the incoming server pop.googlemail.com
I wanted to add a new IMAP account, so in T'Bird
Tools.... Account Settings
Account Actions ..... Add Mail Account
Filled in
my name,
the email address ([email protected] - and in gmail this mail account
was created as IMAP),
password (with a tick to remember this)
... continue
and it then detected the mail setup as IMAP,
Incoming : IMAP, imap.googlemail.com , SSL
Outgoing : SMTP, smtp.googlemail.com , SSL
Username: [email protected]
but when I then clicked on Done
it said Error Creating Account - Incoming server already exists.
And if I then clicked on OK followed by Manual Config, it then showed
in the Mail Account Setup
Incoming: IMAP imap.googlemail.com 993 SSL/TLS Normal Password
and again if I then clicked Done it gave the same error message as before.
(and I have screenshots to support all of this).
But I do not know if someone has been working on a fix to T'Bird or googlemail, because just now when I did it yet again in order to make a final check that what I have been writing here is correct , this time I did NOT get the error message and the new account has been setup!!!!!
So do others find this has now been cleared too?

HT5052 I have been trying to upate my ipod to 5.0.1, but every time i get an error message of the server timed out after downloading for over an hour. My broadband speed here is is 1.5mbs, not good any help?

I have been trying to update my ipod to the 5.0.1 but after waiting for a hour for the download i get an error message that the server has timed out as my broadband speed is not good, could this be the problem and if so how can i get the update?

I have the same problem I disable msconfig mode all the programs escept windows and apple products but the same error appears at the last second of downloading the update

When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server. When I send to e-mail from another address, I get back an error saying the e-mail address is unknown. My e-mail has worked fine for years until

When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server. When I send to e-mail from another address, I get back an error saying the e-mail address is unknown. My e-mail has worked fine for years until yesterday. HELP!

The specific text of the error message is very important here — I'm not sure exactly you're encountering here.
If you're able to connect to your email server and are able send email to other email addresses and if the failures are specific to one email recipient address, then please contact the intended recipient of the failing email, and confirm their address is valid. (This is the way I'm reading your question.)
If you are unable to send any email to any other email addresses and this is specific to your email address, then try the web mail client interface (if one is available) to verify your login user and password, and check with your email ISP for assistance. If your email password works via web mail, follow this Apple troubleshooting guide, then — if everything else fails — I'd probably then entirely remove the email account from Mail.app and re-add it per your email ISP's particular setup requirements. (Some issue with the setup or maybe a corrupt setting in OS X or a problem at the mail ISP servers is a common problem, but this effects attempts to send to all email addresses via that account.)
An email account setup is specific to an email provider, unfortunately. If you're using one of the more common email ISPs, then there are usually setup guides and frequently-asked questions posted online.

TS2621 I keep getting the error message "yahoo! server unavaible" when trying to set up my email

I just got my Iphone 5 and I'm trying to set up my email. I keep getting the error message "Yahoo! server unavailable". Help! Thank you.

There are different ways, but delete that email account and this time when you go to set up your email, dont start in the yahoo setup tab, do it in the " Other " tab and set it up that way.

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

HT4519 I have a yahoo email account and i keep getting an "error connection to the server failed"

The email account i have always used on my ipad mini is through yahoo. Now i keep getting an error "connection to the server failed" when trying to access my email.

its a common message but could be due to several possible causes
try this
close the mail app by double tapping the home button, swipe the screen until you see the large icon of the mail app. Swipe the app up and off the screen to close. Tap the home button to return to home screen. Open mail app again.
if that didn't work, then...
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).
Unplug your wifi router for 5-10 minutes and at the same time reset settings on the ipad
settings/general/reset/reset all settings
(no data will be lost)

HT5429 i m using iphone 4s . when i try to set direction that time i get one error like the map server is not available . will you help me ?

i m using iphone 4s . when i try to set direction that time i get one error like the map server is not available . will you help me ?
how to help this problem..?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Mail to blocked SMTP server stalls mails to other SMTP servers

Hi,
I have a particularly weird problem.
In Mail.app I have a Mobile Me account, a personal IMAP account and an Exchange account (working over IMAP etc. as it's Exchange server 2003 so I don't get all the fruity Snow Leopard/Exchange goodness).
The problem I have is this- in the office they block access to external SMTP servers (quite rightly).
If I send a mail through my Mobile Me or personal IMAP account and forget to tell it to use the internal work SMTP server then Mail.app will sit forever trying to connect to the external SMTP server and never time out (or if it does timeout it must be more than a few hours).
This isn't a huge problem in and of itself. However from this point on any mail I send will sit behind the stalled e-mail in the queue and never go out- so even my internal mails hang around not sending.
The only indication of this is the non-stop spinning wheel on the sent items folder and the never-ending 'Connecting to smtp.me.com' in the activity window.
The only way to resolve this is to go to the activity window and cancel all connections to the offending SMTP server. At that point the 'Outbox' folder will appear in my folder list and show me all of the e-mails it hasn't sent. I then have to open each one individually and click send again, at which point they go out (provided they still have the correct internal SMTP server selected).

Ernie,
Thanks for the response. I have previously seen Mail.app fail to send and bring the message back up telling me this- but that usually happens quite some time after trying to send, if at all, and I don't recall ever having this error happen in the office (where they are blocking these ports).
I have had similar issues when travelling and trying to send through hotel networks that typically block port 25- even then I rarely get a failure message (note that this has been happening both on 10.5.x and my clean install of 10.6.x)
I did check to see if the network here was doing some spoofing on SMTP ports but it isn't;
#####:~ #####$ time telnet smtp.me.com 25
Trying 17.148.16.31...
telnet: connect to address 17.148.16.31: Operation timed out
telnet: Unable to connect to remote host
real 1m15.019s
user 0m0.002s
sys 0m0.003s
I get the same 1m15s timeout on port 465 & 587, yet Mail.app never seems to give up trying.
I tried sending to an external SMTP server without SSL to see if the behaviour was any different- but after 15 mins it's still trying so I guess not.
Weird.

I get an error when using SMTP e-mail send

When i try to use SMTP mail send.vi i get an error code 1 saying TCP cannot exchage information with SMTP vi. It mentions possible reason for it is not using GPIB card. But there is no relation between GPIB and TCP. I am not able to figure out the problem. Can anyone help ??
For Latest TECH News check out my blog at http://directfromdigg.blogspot.com

Hello,
Error 1 is a very generic error. It means that either an input parameter is invalid or the gpib controller be the controller in charge, but not necessarily both. In the context of this problem, it is referring to an input that doesn’t appear to be correct and as you mentioned has nothing to do with GPIB. The most common problem with the SMTP Email VIs is an incorrect name to the ‘Mail Server’ input. The Mail Server is the name or IP address of the outgoing SMTP mail server you are using. The easiest way to find this information is to check with your IT department. I hope this helps. Best of luck!
Regards,
Chris J

I keep getting this error in the SMTP logs, What's wrong?

I keep getting this error in SMTP, and for some reason the server is unable to send messages. It's a fresh setup, so i'm not sure what i'm missing..
fatal: file /etc/postfix/main.cf: parameter myhostname: bad parameter value: mini.socialgraphics.com.
Any advice would help, Thanks!

From the server's webmail interface i can log in and send messages to outside accounts.
But i can't recieve any messages on the server, everything i send to the server gets a error of:
Delivery to the following recipient failed permanently:
[email protected]
Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 5.7.1 <[email protected]>: Relay access denied (state 14).

Why do i get an error 66 when i sent a mail use SMTP Email Send File.vi?

        When i use SMTP Email Send File.vi,it works very well for some special mail sever such as the sever of my company,For others,while debugging it ,i use a free email address from 163 (http://mail.163.com/) or Sina(http://mail.sina.com.cn/) i get an error 66.I use the default sever port number(incoming mail sever(POP3):110,Outgoing mail sever(SMTP):25).
Server information for 163:
   incoming mail sever(POP3)op3.163.com
   Outgoing mail sever(SMTP):smtp.163.com
Server information for Sina:
   incoming mail sever(POP3)op3.sina.com
   Outgoing mail sever(SMTP):smtp.sina.com
Thank you!

According to the LabVIEW documentation error code 66 is: "The network connection was closed by the peer", which is not very helpful. There could be a number of reasons why this happens. Could also be that the server was down. I had trouble connecting to one of the sites you listed. Does the server require authentication? I tried the links you provided, but they're in a foreign language and I can't read them, so I can't tell. If authentication is required, then the SMTP VIs provided with LabVIEW won't work since they don't handle authentication. If the server requires authentication you can try the updated OpenG SMTP VIs that I had posted in this thread.

Why do i get an error 63 when i sent a mail use SMTP Email

I used "SMTP Email Send Message.vi" but i have allways the error 63. How can I reslove this error? Ist this a port error? a pop up displayes and shows that i should to change the option under the tool palette-> Server.Vi but Ido not know what i can do?

What SMTP server are you trying to use? Your own? Obviously, it is refusing your connection attempt. The SMTP VIs exclusively use the classic SMTP port (25), but many newer mail servers require different authentication, port, encryption, etc. for security reasons.
Start with this search.
LabVIEW Champion . Do more with less code and in less time .

Configuration error when saving SMTP server

I am configuring CUP 5.3 (SP06). When I put in our SMTP server, I get the following error:
" Action failed. An unknown error occurred while performing the operation. "
It looks like this screen was changed with SP06. I am not filling out anything under "Enter Email Notification Sender" or under "Application URL" (which seems to be new fields).
Here is what the log says:
2009-03-18 16:23:39,339 [SAPEngine_Application_Thread[impl:3]_39] ERROR com.virsa.ae.configuration.actions.SMTPServerNameAction
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
     at java.lang.String.substring(String.java:1444)
     at com.virsa.ae.commons.utils.URLHelper.initialize(URLHelper.java:430)
     at com.virsa.ae.configuration.bo.SMTPServerNameBO.saveSMTPServerName(SMTPServerNameBO.java:106)
     at com.virsa.ae.configuration.actions.SMTPServerNameAction.saveSMTPServerName(SMTPServerNameAction.java:76)
     at com.virsa.ae.configuration.actions.SMTPServerNameAction.execute(SMTPServerNameAction.java:51)
     at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:271)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:432)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Thank you for your help.

Hi Peggy,
This is a known bug in AC 5.3 SP6. SAP has added fields for administrator email address, application URL and redirection URL. Even though application URL and redirection URL do not show up as manadatory fields but they are required to save the configuration. To get pass through this error, just provide anything in those 2 textboxes with some dummy email address in administrator email address textbox. You should be able to save it now.
This is being fixed in SP7 which should release somewhere around end of March.
Please check this similar thread:
CUP SMTP server error
Regards,
Alpesh

Getting problem when connecting to SMTP server through java code

Hi all,
I am getting problem when i am going to connect with "Kerio SMTP server" through java code. The error what i am getting is :
"[16/Sep/2008 15:59:09] Sent: Queue-ID: 48cf8a73-000000f9, Recipient: <[email protected]>, Result: failed, Status: 5.3.2 554 5.0.0 Too many hops (101, max 100), message looping" when sending an email from [email protected]

Looks like something is set up wrong on your server that's causing messages
to be forwarded around a loop too many times without ever reaching the destination.
For instance, if server A forwards to server B, and server B forwards to server A,
this would happen.

I'm getting an error on my SMTP server in mail

Similar Messages

Maybe you are looking for