I'm getting constant data messages in my email and I'm not even running desktop redirector. Very annoying.
I constantly receive [email protected] emails on both my handheld and in my inbox. I'm not running the redirector and instead am using my works internet exchange mail. I had no problem for about a year, then all of the sudden I started receiving the network messages constantly, even at night when I'm not sending any email. I did notice that on my handheld under email setup it says (2) as if to indicate there are two email addresses set up. But when I acess the setup menu there is only one email. Any ideas? It is very frustrating to have to keep deleting all these network emails.
Solved!
Go to Solution.
I may have fixed it with this article. http://bit.l y/mK79yg I deleted CMIME and CICAL service books. I'll post back if this fix works. Funny though, I never had this problem previously. It just started randomly one day.
Similar Messages
-
Can someone help me set up a vacation message on mail? I tried the rule, but it did not work.
It's best not to rely on rules constructed in Mail, or any other mail client. That can result in infinite mail loops (where your autoreply triggers someone else's autoreply, which triggers yours again, etc). You should use whatever vacation mail capability is provided by the mail server. Those are typically more robust, and have conditions that will prevent infinite mail loops from happening. Of course, you should also think twice about using vacation messages at all, since they can reply to spam, which can cause all kinds of problems.
-
Is there a bug with the latest update to iTunes because I am unable to install it, I get constant error messages if I try to open it after installing
Hey there Mambo822,
It sounds like you are unable to open iTunes after installing a recent update. I would recommend the troubleshooting in the following article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I share an Apple ID with someone but we are now on iOS8 and getting each others messages on our iphones and ipad. How can I split the account safely as well as protect icloud backed up data?
Use different Apple IDs for iMessage (and also FaceTime) to avoid getting each others text messages (and FaceTime calls). One of you should go to Settings>Messages>Send & Receive (and Settings>FaceTime), tap the ID, sign out, then sign back in with a different ID. You can continue to shared the same ID for the iTunes store and other services.
-
Please see the subject line thanks
I upgraded to 20gb iCloud but it isn't enough to back up. I get constant error messages saying there is no backup space and I've not been able to use the upgrade. Apple promised to refund then didn't. Please help is there anyway I can use this space?If you were told they would refund the price for the iCloud storage - Contact AppleCare and ask to speak with a senior advisor. Have the case number for the promised refund available.
If you are trying to update your device, but you don't have sufficient space to download and install the update, you need to delete content from your device. Buying storage in iCloud does not add space to the device which is what you need.
You can always update using a computer with iTunes installed - this method is faster, and will allow you to make a backup on the local computer (Local backups restore faster than iCloud backups).
HTH -
My ipod needs to be restore and I get a error message saying :ipod software update server coud not be contacted.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Then tap Settings > General > Software Update
No data is lost due to a reset. -
When I download Photoshop CC I get everytime a message "Completed installation, some optional components are not installed correctly. (6)"
What can i do?
I have Windows 8 and i7 with gtx760
Please help mePlease send me the installer logs to [email protected] from C:\Program Files (x86)\Common Files\Adobe\Installers
The file name would be like: Adobe Photoshhop cc 2014 15.0 <Date>.log
-Pragya -
I have uninstalled and reinstalled iTunes multiple times. When I connect my iPod Classic I get the following message: The software for this iPod is not installed correctly. Please reinstall iTunes to install the required software. Any ideas?
Assuming you have windows, try uninstalling iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes. You must follow this guide exactly or it will not be successful. Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.
-
I get the following message when sending emails on my ipad: The recipient "email address" was rejected by the server". If I send the email to 3 people, one will be rejected. If I send the same thing to the same 3 people a different one will be rejected. Any ideas?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
-
I have an older iPhone (3gs) and need to upgrade to a newer phone (4S). I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone. But not sure how to do that. When I open iTunes it has a button that say "Back Up iPhone", but I'm not sure what that does. When I go into the sync options it say I have another user account and asks me if I want to merge of replace. I'm assuming it's trying to tell me I have an older iTunes Library, but don't know that. Geez, maybe people over 60 shouldn't have iPhones, iTunes just bafles me.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
-
hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I am trying to change my Apple ID. Try to do this I keep getting an error message saying ‘This email address is designated as your rescue email address and cannot be used as your Apple ID or Primary email address. Please choose another.’ The email address that I want to use did use to be my recovery email but I have changed it, so that address is no lonegr associated with my account. I do not understand why I cannot use it as my Apple ID now. Can anyone help?
Contact iTunes customer support for assistance.
-
I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms are appreciated.
Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.
-
I had downloaded and installed one of those automatic Windows update and now whenever I try to open my Firefox I get an error message, "Platform version 6.0.2 is not compatible with minVersion >6.0.1 maxVersion <6.0.1
If you use ZoneAlarm Extreme Security then try to disable Virtualization.
Do a clean reinstall and delete the Firefox program folder.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]] -
For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone
mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR
Maybe you are looking for
-
Decimal places in condition records
Hi Friends, (1) I want to know how to maintain rates in condition records with 7 desimal places. Clients requirement is to maintain price of a material as 0.0009123 per Ton. Thanks and Regards, Anil Agrawal
-
The task TS20000166 in PO release workflow( WS20000075 ) is not terminating
Dear Experts , The task TS20000166 in PO release workflow( WS20000075 ) is not terminating after release the PO . In the WS20000075 ,the event RELEASESTEPCREATED is triggeing and move to the next step.The next step is 'Release of purchase order' , t
-
Hello. I have recently purchased a HP ENVY 15T. I came equipped with NVIDIA GeForce GTX 850M video card with 4 GB of memory. The recommended the resolution is 1920 x 1080, but the was hurting my eyes. So, I downgraded it to 1600 x 900. Most windows a
-
Can't filter community query by custom property
I'm trying to search for a community through the objectManager based on a custom property value (part of a LoginPEI that redirects the user on login to a personalized community). The Query() call is failing with the following exception: ParseQue
-
Did anyone notice a lot of "Un-Answered" questions/problems in this forum?
I am new to this forum, but there seems to be a lot of un-answered questions. Am I wasting my time looking for answers from Apple here because I am stuck with a Windows machine at my work place? I feel like the last option button at the bottom of thi