I'm getting error when trying to run demo Serial code

I'm trying to test out the demo of labview to see if we are going to upgrade. I am trying to access the serial ports since we used to do that before, but I'm having no luck with any of the demo code. When I run Serial Communication.vi, it keeps giving me an error. All other demo's I have tried give errors as well, although I don't know if it is the same one. I do not have any conflicts with my com ports, yet I get a -1073807202 err code. Here is the text I get in the error box.
Property Node in VISA Configure Serial Port (Instr).vi->Serial Communication.vi
Any help to get me started? I haven't used labview seriously for about 4-5 years with vers 5.0.
I have win2k in case that makes a difference.
Thank
s

Make sure that NI-VISA or the NI-VISA Run-Time Engine is installed on the computer. This error suggests that NI-VISA is not installed, or there is a problem with the installation. To remedy this, uninstall any existing versions of NI-VISA on the machine. Then, either reinstall the same version of NI-VISA, or upgrade to the latest version of NI-VISA (linked below).
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=132060_US
I hope this helps out. Please let me know if you continue to get the error after upgrading NI-VISA.
-Josh

Similar Messages

"Getting exception when trying to run a JDBC code"

Hi,
I am getting this exception when I try to run the Jdbc code. Can some one sort out what is the problem.
Exception in thread "main" java.lang.UnsupportedClassVersionError: TestJdbcGrip
(Unsupported major.minor version 49.0)Regards

The JDBC jarfile you have is either too new, or too old (less liekely) for you current Java version. Download a newer Java version and try that. If it doesn't work, then download the newer version of the JDBC driver and try it with both of the Java versions (both because if it works with both, then you can continue using whichever one you like).

Error when trying to run an application that worked when built with 8.6

I have a simple program that I wrote in version 8.6 that I never had a problem building and running applications built with it in 8.6. Two weeks ago I got 2009 in the mail because we had very recently purchased 8.6 and I am getting errors when trying to run an application built with the same code using 2009. The error has to do with the Mean.vi. It claims it cannot find it. The error I get reads as follows:
An error occurred loading VI 'NI_AALBase.lvlib:Mean.vi'. LabVIEW load error code 3: Could not load front panel. I don't need access to this vi's front panel, so I am wondering if it is a problem with the runtime engine and not my code. Please respond as soon as possible as this will quickly start to impact my testing schedule. Thank You.
Solved!
Go to Solution.

Hi!
The same problem ???
I discussed it with my local NI technical support team. The application works without any problems now.
Basic rule: when creating an installer be sure that option "Run Time Engine xxxx" in "Additional Installers" category is checked in spite of the fact that Run Time Engine is already installed.
Best regards.
Attachments:
ADDINST.png ‏13 KB

I'm getting a -2003F error when trying to run the internet recovery after installing a new hard disk in my macbook pro, any suggestions?

After installing a new hard drive in my 2011 macbook pro, I'm getting a apple.com/support -2003F error when trying to run the internet recovery. Any suggestions?

Did you format the new HDD? What is the status of the old HDD?
Do you have an early or late 2011 MBP?
Ciao.

HT4796 I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
Is this the only site you have problems with ? and does Safari work ok ?
Often this problem requires the page to be reloaded
* try pressing the shift key as you reload the page
Another problem is sometimes the cookies for that site need clearing
* see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
* see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]]

Error when trying to run Advisor

Hi!
I get the following error when trying to run the Advisor (Application Builder > Application xxx > Utilities > Advisor) over our application:
Unknown type! View: APEX_APPLICATION_PAGE_PROC Column: CONDITION_EXPRESSION1 Value: WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED
... this happens every time, even if I uncheck all boxes except one (e.g. "References with substitution syntax").
I'm wondering if there is something wrong with our Apex installation as I can't see any other references to this problem in the forum. We don't seem to be suffering any other problems so I expect it's something small...
Has anyone else ever encountered this and does anyone know of a solution? I would like to use the Advisor for some QA processes as it looks like a handy tool.
Many thanks in advance,
Alex.
Versions:
Apex 4.1.1.00.23
Oracle DB 10.2.0.2

Hi Alex,
very interesting. Looks like one of your processes uses the WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED condition which has been deprecated for a very long time.
If you execute the following query in your workspace schema, you should find those processes which do use the condition. You might want to check if the reported pages/processes are still used in your application.
select application_id,
       application_name,
       page_id,
       page_name,
       process_name
from APEX_APPLICATION_PAGE_PROC
where CONDITION_EXPRESSION1 = 'WHEN_ANY_ITEM_IN_COMMA_DELIMITED_LIST_OF_PAGES_HAS_CHANGED';Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

App File Server connection error when trying to run a BI Publisher report..

hello Gurus...
As above - App File Server connection error when trying to run a BI Publisher report.. FOR THE FIRST TIME.
What does our DBA need to do..?
error message reads..
Template code: SUARXASR
Template app: AR
Language:      en
Territory:     GB
Output type:   EXCEL
[5/10/10 10:59:27 AM] [UNEXPECTED] [46321:RT1487572]
oracle.apps.fnd.cp.util.RemoteFileException: An error occurred while attempting to establish an Applications File Server connection with the node FNDFS_*****.ac.uk. There may be a network configuration problem, or the TNS listener on node FNDFS_*****.ac.uk may not be running. Please contact your system administrator.
at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:241)
at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:194)
at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:130)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:264)at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
[5/10/10 10:59:27 AM] [46321:RT1487572] Completed post-processing actions for request 1487572.I'm sure we never had to set anything up in our Test instance!??!!??
many thanks for looking..
Steven

nobody experienced this before..?

Getting error when trying to create Exchange Connector in System Center Service Manager 2012

Getting error when trying to create Exchange Connector in System Center Service Manager 2012
The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
Warm Regards, Pramod Kumar Singh Manager-IT

Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
Also, your question is related to SCSM, please post at SCSM forum if you have further question.
Juke Chou
TechNet Community Support

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

Today my iPad says network error when trying to run amazon instant video...

Today my iPad says network error when trying to run amazon instant video... I fooled it into starting the movie, but the error message continues...

What you need to do is go into settings
Then go to wifi
Tap the blue arrow to the wifi you are connected to
Tap forget network
Retap the wifi you want
Reinsert your wifi code if you have one

I get this error when trying to run iCloud- Error: 0x80040604: Up/POST:Conflicts

Why do I always get this error when trying to upload Outlook data to iCloud (Win 7 & Outlook 2007) Error: 0x80040604: Up/POST:Conflicts???
I have deleted an reinstalled iCloud and still can't get past the error.

have you seen this KB article: http://support.apple.com/kb/HT1398 ?
JGG

Error when trying to run the rcu.bat file as part of OBIEE 11g installation

when trying to run the rcu.bat file as part of OBIEE 11g installation on windows 7 64 bit I am getting the following error
"windows cannot find C:\Users\manoj\Desktop\Oracle.Make sure you typed the name correctly, and then try again".
Please help me how to overcome this error, I am not able to understand why it is looking for C:\Users\manoj\Desktop\Oracle.
Thanks
Manoj

after setting the ORACLE_HOME and Path environment variables also....I am still getting the same error...so is it like RCU can be run only on windows 7 32-bit machines and it does not work on 64-bit machines? and also it seems like the previous versions of OBIEE 10.1.3.X does not support windows 7 64-bit machines...
please help me finding a solution to this error....
and what are all the versions of OBIEE can be installed on windows 7 64-bit machines?
can't we install OBIEE 11g on windows 7 64-bit machines without including RCU?
thanks
Manoj
Edited by: mkumar on Jun 2, 2011 3:47 AM

Getting Error when trying to connect to the Primavera database. PPM V7 SP3

Hi Guys,
Caused by: org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'mailService' defined in class path resource [com/primavera/bre//com/primavera/bre/integration/intgconf.xml]: Invalid destruction signature; nested exception is org.springframework.beans.factory.support.BeanDefinitionValidationException: Couldn't find a destroy method named 'destroy' on bean with name 'mailService'
I have looked into the intgserver.jar under P6IntegrationAPI/lib and looked the com.primavera.infr.srvcs.MailServiceImpl.java and can see that there is no destroy method whereas it is defined in the com.primavera.bre.intergration.intgconf.xml as below

<bean id="mailService" class="com.primavera.infr.srvcs.MailServiceImpl" init-method="init" scope="singleton" destroy-method="destroy"*+>
<property name="adminManager"><ref bean="adminManager"/></property>
<property name="threadPool"><ref bean="threadPool"/></property>
<property name="settingsManager"><ref bean="settingsManager"/></property>
</bean>
I get the above error when trying to connect to the Primavera database. I use PPMV7 SP3 and I have installed the Integration API from EPPMV7 bundle.
My demo's are working fine.
Any help would be appreciated.
Thanks,
Kajal.

Hi Marc,
I am using a userid (is an admin)
Using global login method and provided userid & password in integration settings.
In the machine profiles, provided userid, password and domin.
Not providing domain in weblogin.
With all the above I am still getting error "Could not authenticate the specified user. %0" for HFM application
And with the same settings I am not getting any error to connect to essbase cube.
Any suggestions?
Thanks
Krishna

Getting error when trying to update apps

I'm getting this error when trying to update CC apps on my iMac:
Update Failed
Unable to write to file/folder. You may exit now, try after disabling your anti-virus, or contact customer support.
Has anyone experienced/resolved this issue?

Ggallowaycb it would appear that your current User account's file permissions have become compromised and you are unable to write/modify a specific directory. Please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html for information on how to adjust your file permissions.

Error when Trying to Run Concurrent Request on ASCP Instance

Hi Experts,
I have an issue when trying to run custom concurrent program in ASCP production.
The error message is:
oracle error 20001
ORA-20001: APP-FND-02901
You do not have access privilege to any operating unit. Please check if your profile option MO: Security Profile includes any operating unit or the profile option MO: Operating Unit is set has been detected in MO_GLOBAL.INIT
I have searched through metalink regarding this issue and the solution is I should define the "MO: Security Profile" and "MO: Operating Unit" profiles.
But the problem is my ASCP instance is not have any OU, it just defined for Inv Orgs. So, when I tried to define the profile, the LOV is empty.
FYI, in my ASCP dev instance is working fine. I can run my concurrent request into it.
In this instance, the profiles of "MO: Security Profile" and "MO: Operating Unit" are blank too.
From this node:
XLAACCPB - Create Accounting Program fails with Oracle error -20001: ORA-20001: APP-FND-02901: You do not have access privilege to any operating unit [ID 753824.1]
It provided 2 actions, and when I tried to run query in the 2nd action, the result is:
/* $Header: AFPFPROB.pls 120.18.12010000.10 2009/04/24 19:33:53 pdeluna ship $ */
Any help would be really appreciated.
Thanks & Regards,
Rheza

Hello Rheza,
We are also facing the same issue in Self Service HR, We also do not have any Operating Unit setup.
We are trying to run seeded "Active Users" concurrent program. Are you sure without setup of MO: Security Profile / MO: Operating Unit, It will work?
Regards,
Saurabh

I'm getting error when trying to run demo Serial code

Similar Messages

Maybe you are looking for