I'm getting errors after I upgraded to Mavericks

After I upgraded my Mac Pro to Mavericks, I've been having problems exporting files out of Final Cut Pro to any use.
The error message displays the following:
The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
Has anyone seen similar error and found a way to fix it?

10.0.1 //
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.4 GHz
Number of Processors:          2
Total Number of Cores:          8
L2 Cache (per Core):          256 KB
L3 Cache (per Processor):          12 MB
Memory:          20 GB

Similar Messages

"disp+work" process in not getting started after kernel upgradation

Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      55
M sid        TNG
M systemid   562 (PC with Windows NT)
M relno      7410
M patchlevel 0
M patchno    42
M intno      20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid        2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm)                         24288    (1104)
M DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
M DpShMCreate: sizeof(ca_adm)                           432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)                      0              (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)                         0              (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm)                       520080 (1016)
M DpShMCreate: sizeof(vmc_adm)                       0              (3208)
M DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm)          64
M DpShMCreate: sizeof(j2ee_adm)       3936
M DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M    pid = 2392
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    workerType = DP_WORKER_DIAWP
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M mode_cleaned_counter = 0
M    control_flag = 0
M    report = > <
M    action = 0
M    tab_name = >                              <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for                  64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
                              711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tng

C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB

When i am on the 4 step in Search Result Display options, i get errors after 2 radio buttons

I am using Oracle portal 9.0.2 version
When i am on the 4 step in Search Result Display options, i get errors after 2 radio buttons
Default Search Results Page
This Search Portlet
An unexpected error has occurred (WWS-32100)
User-Defined Exception (WWS-11230)
Unknown Exception (WWC-45131)
ORA-20101:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWPOB_API_PAGE", line 3369
ORA-01403: no data found
ORA-01403: no data found (WWC-11230)
No data found (WWS-32101)
ORA-1403: ORA-01403: no data found
ORA-01403: no data found (WWC-36000)
Error: An unexpected error occurred: User-Defined Exception (WWC-43000)
Please help me with this one
P.S I tried to run inctxgrn.sql, but it did not solve the problem

i solved the problem by runing 2 scripts as a portal user
You can refer to bug - 2418089. This was fixed in 9.0.2.3
begin
wwpre_api_value.set_value_as_number
p_path => 'oracle.portal.search',
p_name => 'searchresultpageid',
p_level_type => wwpre_api_value.SYSTEM_LEVEL_TYPE,
p_level_name => null,
p_value => 6,
p_commit => true
commit;
end;
begin
wwpre_api_value.set_value_as_number
p_path => 'oracle.portal.search',
p_name => 'searchresultpagesiteid',
p_level_type => wwpre_api_value.SYSTEM_LEVEL_TYPE,
p_level_name => null,
p_value => 6,
p_commit => true
commit;
end;
NOTE - The difference is the value of 'p_name' attribute. If u see carefully it is 'searchresultpagesiteid'. The first time u run this the value is 'searchresultpageid'.

Getting error after installing admt 3.2

hi team
i am getting error after installing the admt 3.2 on server 2008 R2 where i have installed sql server 2008 sp1 with express edition
the server is a DC
the error is "Unable to check for failed actions. :DBManager.IManageDB.1 Unable to retrieve the database file pagth from the registry. the system cannot find the file specified"
Thanks,
viraj

You should change the forum type on this to a question. The way you have this labled as a discussion not a problem.
See if the link below helps you out.
http://support.microsoft.com/kb/2266373
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security+, BS CSci
2008, Vista, 2003, 2000 (Early Achiever), NT4
http://www.pbbergs.com Twitter @pbbergs
http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup. This posting is provided "AS IS" with no warranties, and confers no rights.

After I upgraded to Mavericks my Epson 5000V scanner is not working properly. I can scan by going into Preference/PrintersScanners to operate the scanner, but I cannot find the output.

After I upgraded to Mavericks my Epson 5000V scanner is not working properly. I can scan by going into Preference/PrintersScanners to operate the scanner, but I cannot find the output. I am trying to save the scan as a PDF in Documents.

Have you installed Apple's latest Epson drivers?
They are here:
http://support.apple.com/kb/DL1398

After I upgraded to Mavericks, Quicktime has had to convert MPEG-4 videos to .mov

After I upgraded to Mavericks, Quicktime has had to convert MPEG-4 videos to .mov.... Why? Is there a way to stop that or to change the settings?

After I upgraded to Mavericks, Quicktime has had to convert MPEG-4 videos to .mov.... Why? Is there a way to stop that or to change the settings?
Your question requires more information. What does MPEG-4 mean to you? What file container and which compression formats are you referring to here? Is the MPEG-4 content "standard" or proprietary. Basically, depending on the file container and the specific content, QT X v10.3 may initiate a conversion ever where the individual data tracks are fully QT compatible. Proprietary compression formats will definitely do this. In some cases, the audio or video in one source container may simply be passed through to the MOV file while in another source container, QT X v10.3 forces a conversion of that same data track. In short, there are too many variables at this point to properly answer your question or attempt to duplicate your workflow.

After I upgrade to maverick I cannot longer use my scanner (Epson Aculaser cx17). Now it works only as printer

After I upgrade to maverick I cannot longer use my scanner (Epson Aculaser cx17). Now it works only as printer. Does some one else have a similar problem?
With Lion worked very well.

The scanner is not amongst the scanners Apple supports on 10.6 through 10.9:
OS X: Printer and scanner software available for download
Now it could use another scanner's engine, thus supporting the driver. It could also support the TWAIN preference in Preview application.
It could also show up in Apple menu -> System Preferences -> Print and Scan.
If none of that helps, look at my FAQ*:
http://www.macmaps.com/macosxnative.html#SCANNER
for third party scanner drivers.
* Links to my pages may give me compensation.

Will I still be able to use ilife, iwork or any of my applications after the upgrade to Maverick? I currently have version 10.6.8. Thanks!

Will I still be able to use ilife, iwork or any of my applications after the upgrade to Maverick? I currently have version 10.6.8. Thanks!

The ONLY stuff that should give you trouble is anything that requires Roestta to run. iLife apps can be upgraded for free, and iWork 09 should still run. Office 2011 and Adobe Creative Suite CS5 and CS6 run like before on my Mini.

Will i have big problems if i go back to Mountain Lion after having upgraded to Mavericks?

Will i have big problems if i go back to Mountain Lion after having upgraded to Mavericks? I also updated iphoto, pages ,numbers etc

According to the App Store, Pages compatibility is v10.9 or later.
Same for iPhoto and Numbers.
Those apps will not run on v10.8 Mountain Lion.

After i upgrade to mavericks, every time i create folder or delete files, they keep asking me ti fill the password, but only on my finder? help me please :) Thank You

after i upgrade to mavericks, every time i create folder or delete files, they keep asking me ti fill the password, but only on my finder? help me please Thank You

As a first step, open Disk Utility > select your hard drive > repair disk permissions.

Report giving error after 10g upgrade

We have a custom report which is erroring out after 10g upgrade. Following is the log file-->
**Starts**24-APR-2009 04:11:21
ORACLE error 3113 in FDPSTP
Cause: FDPSTP failed due to ORA-03113: end-of-file on communication channel
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P
APP-FND-01564: ORACLE error 1000 in AFPGRG
Cause: AFPGRG failed due to ORA-01000: maximum open cursors exceeded.
The SQL statement being executed at the time of the error was: &SQLSTMT and was executed from the file &ERRFILE.
Start of log messages from FND_FILE
End of log messages from FND_FILE
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P.A
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected to ORACLE
Contact your system administrator or support representative.
Shutting down Concurrent Manager : 24-APR-2009 04:11:51
ORA-01041: internal error. hostdef extension doesn't exist
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01041: internal error.
hostdef extension doesn't exist
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
_ 3 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []
I already increased the cursors from 700 to 900
How to fix it?

Hi,
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []Refer to the lookup to get more details about this error.
Note: 153788.1 - Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=153788.1
I already increased the cursors from 700 to 900
How to fix it?Is it possible to increase OPEN_CURSORS to a higher value? Enable trace on this concurrent program, and see if this collects more details about the error.
Regards,
Hussein

Finding: Incorrect SQL throws a random error (after 2005 upgrade)

Hi I thought that I would share an experience that we found after upgrading a system to 2005:
Due to the upgrade of SBO, one of our addons didn't work properly after upgrading it to 2005. Basically the code would break in random places (while stepping through it in the Development Environment).
After some time we identified the error was being thrown because a sql query we were using was incorrect due to the changing of the DB structure in the upgrade. The weird thing was that it didn't throw an error at rs.DoQuery(query) but actually would step into the recordset and then the addon would suddenly stop working - hence the reason it took a while to identify it was the sql causing the problem.
Anyway updating the sql fixed the problem, but if anyone else is finding strange behavior whilst trying to identify why an addon might stop working after an upgrade, you should check any sql being used is still correct....
Daniel

The first versions of SBO2005A SDK (PL00 to PL04) was the say the least VERY buggy... PL05,06 and now 07 seem to get things under control... Any rampup version of 2005 should at least get up PL05 ASAP... I didnt have many problem with the SQL, but "Server produced an error was a very common error".. my problem was primarily in matrixes (add/remove of lines), itemevent (pval internal COM error) and the dangerouse UserTable error due to currupted object in it....

External command Cpic error - after V5R4M5 upgrade

Hi,
We are getting an error when we try to run external commands - Exception raised: PROGRAM_START_ERROR - The problem started after we upgraded the OS to V5R4M5. We are running R/3 45B. kernel patch 994.
SAPXPG JOBLOG: I see the following error MCH1210
QCPFMSG
MESSAGE-
Receiver value too small to hold result.
I could not find a new version of sapxpg for 4.5b_ext. I
Regards,
Brian

Never mind I found note 976837 that resolved the problem
Regards,
Brian

SIM card registration error after SW upgrade

Hi
After I upgraded my Nokia 6110 Navigator to SW 4.22 I get insert SIM or SIM card registration error. It happends approx. once a week. Before I upgraded my mobile it never happend. Why?
BR / haav

This is often a problem with the SIM itself. That it started showing just when you did the firmware upgrade could be coincidence.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Why do i keep getting error messages when upgrading my iPad OS?

I have been trying to upgrade my iPad OS but during the process i keep getting error messages Does anyone have any idea why this is so?

seyi wrote:
I have been trying to upgrade my iPad OS but during the process i keep getting error messages Does anyone have any idea why this is so?
My first inclination is to answer your question --- yes - something is going wrong! I'm sure more specific information will be needed to help you.
Are you getting a specific message? An error code number? Can you describe exactly what you are doing when you get the message?

I'm getting errors after I upgraded to Mavericks

Similar Messages

Maybe you are looking for