I´m getting mixed up

Hello, my P. Bell computer MultiMedia 350/2 is equipped with a MSI 6147, (i440BX) 1.X board,(MediaStar), Bus 100Mhz, Bios Award 4.51 PG.
I want to upgrade its memory, according to the manual it only admits "registered DIMM", on the contrary Pack.Bell says that I can fit it whatever DIMM SDRAM PC100 64-512MB memory. What should I do?, It´s really rather difficult to find a registerd one around here.
Is it proved MSI 6147 works properly with a non-registered DIMM?, I´ve seen some memory manufacturers provide registered and non-regist. compatibles memories with my pc, how can it be possible?, by the way what type of memory is that?, How many are there?, I´d be quite grateful if any helpful forum users bring me up to date about any options to my pc.
Thank you very much indeed in advance.

Thanks Wonkanoby.
The P.Bell´s manual specifications with regard to the system memory are a literal translation into Spañish from the msi´s one, so it follows that there´re no changes from the original, that´s why I´m really rarher surprised.
On the other side, is there any way to recognise or identify a registered module by checking on it visually?.
Thank again.

Similar Messages

Spool getting mixed in SM37 transaction

Hi All,
After a Batchjob is run/completed. When we select the Batch Job and click on the button SPOOL, we are getting incorrect spool. The spool is getting mixed with spool of other Batch Jobs. Sometimes when i click on the button SPOOL, am getting message No List Available even when the spool is available.
Please let me know how to resolve this issue.
Thanks,
Ibrahim

Hi everybody,
Please help me out. I tried to debug the program using JDBG but could not find out when the job is creating spool.

3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.Ho can we change this so our phone information isn't visible to each other?

3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.How can we change this so our phone information isn't visible to each other?

Use separate Apple IDs for each family member and use Family Sharing features of those things (if any) that you do want to share. https://www.apple.com/ios/whats-new/family-sharing/

HT1349 How do I set up a separate icloud account? Both my wife and I have an iPhone 4s and an iPad, but only one Mac. We are tired of our "stuff" getting mixed up together when we sync.

How do I set up a separate icloud account? Both my wife and I have an iPhone 4s and an iPad (1 and 3), but only one Mac. We are tired of our "stuff" getting mixed up together when we sync. Thanks much

You don't need separate iCloud accounts if you want to simply sync unique content to each device using iTunes. I have three iDevices using one ID and one iTunes library and each device has it's own content on it. You need to set up the sync configuration for each device. This is what I recommend.
First turn off auto sync in iTunes. Launch iTunes on the Mac and go to iTunes>Preferences>Devices>Prevent iPods, iPhones and iPads from automatically syncing. Click OK and then quit iTunes.
Connect one of your devices to the Mac and launch iTunes.
Click on the device name on the left side under the devices heading.
Click on a tab in iTunes - Apps for instance.
Click on the Apps that you want to sync to that device.
Make sure that the Sync Apps heading is checked.
Follow the same procedure for all of the other tabs in iTunes ..... Music, Photos, Movies and so on.
After you have finished making all of your selections, click on Apply in the lower right corner of iTunes.
When you are done, eject the first device and do the same thing with the other device. iTunes will now remember the sync configuration on each device.
You can change that configuration any time that you like by following the steps outlined above.
If you want to continue to auto sync, turn it back on in the iTunes preferences as described above.

JPEG Files in Premiere Getting Mixed Up Within a Project

JPEG files loaded into my project are getting mixed up. It's like Premiere can't tell the loaded files apart. That is, I load several JPEGs in to the project, each with a different file name, put them onto the Timeline, and, later, when I click on the file name in the Project panel, several of the different files display the same image of one of the JPEGs in the Poster Frame, the Source Frame, and in the Project Sequence. The file names remain listed in the Project panel continue to show the correct file name, but several show the same image when selected.
I assumed something happened when the files were Imported and were now confused in the project. To try to fix this, I Cleared all of the bad files off the Timeline and out of the Project panel. Changed the source file names in Windows Explorer (i.e., added an "a" to the file name) and re-Imported the files into Premiere. It seemed to work, but a little while later, some of the same files, plus some newly Imported files, all turned to the same image again. I again repeated the Clearing process for the bad files, changed the source file names once again in Windows Explorer, changed the Folder name in Explorer, and again re-Imported the files into Premiere. Again, after a while several of the files all had changed to the same image on the Timeline, the Poster Frame, and the Source Frame.
It's like the program has somehow mixed these files up and, whatever caused the mix up, remains persistent even with files that have been renamed.
This happens to approximately 20 JPEGs out of perhaps 70 JPEGs in the Project. It has not happened on any previous projects.
I can't tell if my Premiere (5.0.3) has become corrupted somehow or if this error is limited to this one Project. Is there a way I can transfer my work into a new project (I really don't want to have to start completely over).
I'm fairly desperate. Thanks!
--Dave

See this thread for a workaround:
http://forums.adobe.com/message/3684577#3684577
This bug has been fixed in Premiere Pro CS5.5.

Contacts getting mixed up by BB

Hi
For some reason out of the blue my contacts get mixed up by my BlackBerry q10
Eg. "Peter Miller"s details are suddenly (inconsistently) merged with "John Smith". Both are saved contacts. This keeps happening without my touching the phone.
I can get an email by "peter miller" and by the time I reply the reply to recipient becomes "john smith"
Has anyone experienced this? Any suggestion?
I'm on the latest OS release.
Thanks
Paolo

Hey thespirit,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Do you synchronize your contacts with Microsoft Outlook or any other email accounts? Just to clarify, do the fields for the numbers and names change? If not, can you clarify what the contacts are doing.
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Mail address's and names getting mixed up?

I have an account with over 10000 emails within it, lately names of senders & recipients are getting mixed up, i.e mail from J smith will show as coming from P smith but actual message is correctly from J smith.
I also have the account on my macbook (OD client with mobile account) and its all fine on there. Could my online account have some issues?

That's because you both use the same Apple ID. Settings>Store>Automatic Downloads>Off.

Since installing IOS 5 on my iphone4, the music gets mixed up and sometimes it won't even play it !

Since installing IOS 5 on my iphone4, the music gets mixed up and sometimes it won't even play it !
Even after many tries of sync, it won't work like before...
Anyone had the same problem?

Same problem here, but I found a solution that worked for me:
Altered from original solution from Emily P:
Okay, mine now works here is what I did.
plug in the iPhone, iPad etc
in iTunes select the phone or iPad
Under Summary uncheck "Sync with this....."
Under "Music" uncheck the "Sync Music"
Sync
Let it remove all the songs, dont worry it will come back no problems.
Once that is all done all the music on the phone or ipad should be gone.
Now check them both back on, sync, and everything should copy back onto it.
Working now !!!!!

Adobe audition 3... chanel R and L get mix during recording ?

Hi, I have the new Adobe Audition 3 intsalled.
I don't know what's happening... When I try to record a song it won't be recorded in Stereo, I mean both tracks R and L get mixed... For example on R there's a guitar sound and L the singer's voice, so when you listen to it, R and L give two different sounds... this is no problem for Adobe Audition 2 but in the 3rd version both tracks get mixed Both R and L will record the guitar sound and the voice together ! How can I solve this problem `???
Thanks a lot,
PErcy

How are you mixing down the input tracks to the master output bus?
Did you remember to adjust the pan knob for a mono input track so it is not sent to both master output channels equally?
A guitar is a mono input, it is up to you to decide how to place it in the output stereo field by using the pan knob. By default it will be in the exact center, equal amplitude on both the left and right channels. This could be described as "mono".
Can you be more specific about how you setup Audition to record the two inputs?

Two or more UI components background colors get mixed up

Hello, I´ve got an issue here
It´s hard to explain in words so I got a print screen of it.
Ok, I will try to explain the structure here and what the problem is...
Each rectangle is a canvas. Inside each of them there is a LABEL where the text is written a rounded BOX and another LABEL inside the box.
<mx:Canvas>
     <mx:Label text="sometext" />
     <mx:Box cornerRadius = "30">
          <mx:Label text = "a number"/>
     </mx:Box>
</mx:Canvas>
My problem is that the colors inside the rectangle gets all mixed up.
The original color in the circle is supposed to be the one that is highlighted on top right of the figure.
But because I´ve changed the rectangle 'backgroundColor' property both color gets mixed up. You can see that the red circle have a distinct tonality on each rectangle.
I would like to somehow not mix up those colors.
Does any one have a clue of a work around for this problem??
Thanks in advance

I solved it myself. I mean, I troubled myself when I decided to set backgroundAlpha no a value lower than 1.
Got this fixed by setting alpha to 1.

I am getting mixed information RE: importing MP3s. Can you help?

I am getting mixed information in Garageband documentation:
1) GB will convert MP3s to AIFF upon import
2) Compressed files remain compressed when imported into GB
Which is the case?
Thanks

Main Help Page
Index
Importing audio files
You can import audio files into a project. You can import any of the following file formats:
AIFF
WAV (including Sony ACID files)
AAC (except protected AAC files)
Apple Lossless
MP3
Compressed audio files you import into a project remain compressed, saving space and time.

Bug: albums with similar names get mixed up in album shuffle mode

I got 2 albums with the same name Splinter from Offspring, and Splinter from Sneaker Pimps. When i use 'album shuffle', there 2 albums get mixed up together: the iPod treats it as 1 album and play one track from Offspring and one from Sneaker Pimps after eachother. Stooopid! Apple, fix this please for me?

This is a well known problem and I don't think it's going to be fixed for you.
The only solution at the moment is to separate the albums yourself. It may not be pretty but Splinter (Offspring) and Splinter (Sneaker Pimps) is probably your answer.

Batch Rename Order Getting Mixed Up

When batch renaming a large amount (usually over 100) of RAW NEF photos, in the format of YEAR_Month_DAY_TIME_#### (where #### is a 4 digit sequence number) EX/ 2014_10-25-122506_0001, the files get renamed and when sorted by file name are in order, however the 4 digit sequence number gets mixed up somewhere along the way.
It usually happens after the mid hundreds.
Example, I had apx 900 images in one folder I batched renamed, and the sequence number progressed properly from _0001 to _0191, but then the next image went straight to _0232.
Any one else experience this issue or have any ideas as to a solution? Very frustrating issue.
Thanks!

Thanks, Tulse... i'm glad that it's an issue that can be reproduced by others. I'm amazed that it hasn't come up (perhaps it has) in the time since Keynote was released. I'm even more amazed that what seems like such a significant bug hasn't been addressed yet. I just hope a new version of Keynote is coming soon that will address things like this.
The reason i'm doing so many build ins and build outs is because i want the content of the slides to transition independently of the background. This is something i would love to see in the next version of Keynote.
For example, i'm using a looping video clip as the background, with our company logo superimposed over it. I'd like for the foreground text and other graphical elements to transition from slide to slide, but leave the background constantly looping. So instead of an empty black "stage", i can have 3D effects applied at the slide level without disturbing my own background.
Anyway... i tried using the blank slide as an intermediary and did not have the success that you did. Build orders still ended up different from those on the master slide.
I wonder if the builds need to be created in the order in which i want them to appear... it seems like new slides may be ignoring the order in which the builds have been dragged around in the Build Order inspector on the Master, and instead, executing them in the order in which they were created.

Still images get mixed - Premiere elements 9

I make a series of say 3 or 4 still jpg images as titles for my movie. All with identical background but with different text. When I drag them to the timeline the first one persists but the others in the sequence will not show when I play them in the preview window. This does not happen if the images are completley different. Renaming the files has no effect. What is happening?

Bob,
I understand what you mean about the appearance of movie clips in the timeline, I don’t think that is the problem. With every other video editor I have used if I drag a number of still images into the timeline they will all behave like separate clips for however longer I want them and they will each show up in the timeline and in the preview window as I scrub along. At the moment instead of a mini movie of 4 still images I get a movie of the first image in the line repeated for times. The other image files are named in the timelinebut cannot be viewed in the edit and they don’t appear in the saved movie I am doing something wrong somewhere.
Geoff
.From: N9JCR
Sent: Sunday, March 04, 2012 2:49 PM
To: tangledbliss
Subject: Still images get mixed - Premiere elements 9
Re: Still images get mixed - Premiere elements 9
created by N9JCR in Premiere Elements - View the full discussion

MY LIBRARY AND MY DAUGHTER'S LIBRARY IS GETTING MIXED UP TOGETHER

My IPhone's library and my daughter's IPod touch libraries are getting mixed up. If I purchase an app, it goes on my IPhone as well as my daughter's and never used to do this. Does anyone know how to fix this?

That's because you both use the same Apple ID. Settings>Store>Automatic Downloads>Off.

How can I organize Songs and Albums that keep getting mixed

I am new to Ipod Nano I would like to know if I can keep the songs seperate from downloaded Albums. So I can play only individual mp3s not the full albums as the two seem to be mixed. I there a better way to keep songs and Albums organised to they dont keep getting mixed.

I am new to Ipod Nano I would like to know if I can keep the songs seperate from downloaded Albums. So I can play only individual mp3s not the full albums as the two seem to be mixed. I there a better way to keep songs and Albums organised to they dont keep getting mixed.

I´m getting mixed up

Similar Messages

Maybe you are looking for