I'm getting "runtime error: unknown exception" when burning DVDs on PE12

Some of this may be for Premiere Pro, but SHOULD also help with Premiere Elements
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
Also http://www.microsoft.com/en-us/download/details.aspx?id=14632 for a Microsoft download
Also search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US for Microsoft help articles
Set your Premiere Elements DVD output to a folder on your hard drive and then use the FREE Imgburn to burn the folder to disc for DVD... Premiere Elements does NOT burn to a folder for BluRay (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons... Set Imgburn to use the slowest burn speed your drive and media will use... I set my burn speed to 1x and let Imgburn adjust to the actual minimum

Similar Messages

Receive 'runtime error: Unknown exception' w/99% processed when creating DVD from movie

Hi,
I have tried several times to create a DVD of a movie with several Scene (w/Stop) Markers only to receive 'runtime error: Unknown exception' with 99% completion.
I'm using Adobe Premiere Element 11 ver 11.0 (20120901.B261.425551).
I'm running Windows 7 Ultimate w/SP1 on a Dell XPS M1530 w/4GB Memory
I have created DVDs in the past with little or no problems.
Would appreciate any help with my problem.
Thanks...

Harry
Thanks for the additional information.
Typically, if you are doing a multi movie Timeline and you want the viewer to be able to navigate to a specific movie followed by return to main menu, then:
Main Menu Marker at beginning of movie 1 and Stop Marker at end of movie 1....then gap of at least 12 frames...Main Menu Marker at beginning of movie 2 and Stop Marker at end of movie 2....and so on. But for the last, remember no Stop Marker at the end of that last Movie on the Timeline.
With those 25 .mts video clips, are you sure that you want or need all those return to main menu possibilities.... a scene marker at the beginning of each and a stop marker at the end of each for a return to menu after each of the 25 video clips? Especially if these are small video clips.
Large project...
Keep in mind that the DVD disc 4.7 GB/120 minutes is in reality 4.3 GB capacity. So as you can tell my the program's lowering of the Bitrate (8.00 to 7.97 Mbps), the program is trying to make the fit by lowering the bitrate. Depending on how your troubleshooting goes, you may want to start thinking about DVD Double Layer Disc (8.5 GB/240 min) if your project gets much larger. In the case of the DVD double layer, 8.5 GB is in reality 7.3 GB. Typically, lower the Bitrate, the lesser is the Quality of the end product. So you do not want to force the program to lower the Bitrate to low to make the fit.
As for the Timeline - + slider to which I referred...
In the above screenshot, please note in the right side of the Premiere Elements 11 Timeline (Expert view)...from left to right at that location,
the Render Button
the icon named "Fit to Visible Timeline
the icon named Zoom Out ( - ) which is related to the slider to its right
the icon named Zoom In ( +) which is related to the slider to its left
That slider is moved by either of those icons or by moving the circular button of the slider with the mouse curser.
We will be watching for further developments.
Thanks.
ATR

Getting Runtime Error 6 Overflow when Running a BI Publisher Template

Hi,
I have a requirement to in a template where i am filling the table with empty lines if the no of lines in the template per page are less then the specified no of lines per page.
It is working when the data is for 4 suppliers when the data is huge ie: 40 suppliers the template is showing Runtime Error 6 Overflow.
can anyone please guide on this,if needed i will mail the template and the xml.
Best Regards,
Mahi

Hi ,
I am also getting the same error. When i am trying to print 6 lines per page in xml publiesher report, it is working fine but if i am trying to print 7 lines or more, then it is going into Runtime Error 6 Overflow. Can you suggest something on this?
Regards
Sachin

Error Code 2130932483 When Burning DVD

does anybody know what code 2130932483 means? i get this error when trying to creat and burn a dvd with menu on photo elements
[Title edited for clarity - Hunt]

dicktatorsmith
We first need to determine what program is involved and the details of what you are doing?
You cannot burn your content to DVD disc (assumed DVD-VIDEO on DVD disc) with just Photoshop Elements and its associated Elements Organizer? So, if you are getting this error in your burn to disc, I am suspecting that you are not working with Photoshop Elements.
So, what program and version of it are you working with and on what computer operating system is it running?
The error that you present at burn has been seen before with no one description of what it means (that I have ever seen). Sometimes defragmentation of the computer hard drive and/or using another brand/type DVD disc resolves the issue. If you are in Premiere Elements burn dialog, does hitting the Rescan button a few times have any impact on the situation?
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
Please review, consider, and then let us know the outcome.
Thank you.
ATR

Error code 0X8002006D when burning DVD

I have been successfully burning 8X DVD-R until I bought a 16X DVD-R.
I keep getting an error message: error code 0X8002006D when I tried to burn on a 16X DVD-R.
I had no problems with the 8X DVD-R. Unfortunately, they don't sell 8X DVD-R anymore.
Help. What do I need to do?
PowerMac G5 Mac OS X (10.4.2) Boot ROM Version: 5.0.1f1
PowerMac G5 Mac OS X (10.3.9)
PowerMac G5 Mac OS X (10.3.9)
PowerMac G5 Mac OS X (10.3.9)

Please tell us what burner you have. Look in System
Profiler > Hardware > Disc Burning.
You're using the Finder to burn?
A Google search on this error code turns up a lot of
topics. Some point to the media as the culprit,
others point to Tiger, some to the drive itself.
Fuji isn't a bad brand of media, but it's not
amongst the best, either.
Generally, an older burner can use 16X media, but
would obviously only be able to burn at the maximum
speed of the drive. It's possible that your drive
doesn't recognize the media code on the disc and
refuses to burn. Sometimes a firmware update to the
drive can solve this problem.
Here's the info under System Profiler>Hardware>Disc Burning:
SONY DVD RW DW-U10A:
Firmware Revision: A43h
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 8192 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
I'm trying to burn data onto a DVD disc as backup. How do I burn using Finder?
Also, Power Mac G5 Uniprocessor Firmware update 5.1.5f2 does show when I click on Apple>software updates. However, it does not have a check mark. Would this apply to my computer even though it does not have a check mark?

Cd/DVD not burning. Error Code 0x8002006E when burning DVD's

I have a MacBook Black and am trying to burn cd's and dvd's. I have tried multiple brands of DVD and CD and can get the cd's to burn once in a while with a microboards printable cd. When they don't burn I get either an error saying something about not being able to calibrate laser power, or it goes through like it's burning and shows up on the desktop, but when I go to open the disk, there is nothing on it. DVD's never finish, giving me the error code 0x8002006E. It will also not read any DVDr's on the machine. Stamped DVD's (store bought)are fine, but multiple brands of DVDr will not read. All of the burned DVD's I have are personal movies and music videos that I made on the machine. Anyone have any suggestions? Is my superdrive toast?

You can check in system profile and select disc burning to verify what cd/dvds are readable by your superdrive....Also with that error message you can try removing any extra ram chip installed, with that model powerbook it also has onboard ram built into logic...being a disc reading problem id say its the superdrive itself, you can try cleaning the lens with those cleaning discs you buy from electronic stores..Burn disc whilst running on power adaptor and not battery...
just a few things to try might help you

Error code 0x80020042 when burning DVD

I recently updated my 2.16 GHz Intel Core Duo MacBook Pro with 2 GB 667 MHz DDR2 SDRAM and MATSHITA DVD-R UJ-857 Superdrive to Mac OS X (10.5.6) and installed the latest updates.
Since updating I have not been able to use Burn to burn DVDs. I get the following error - Burning "xxx" failed because the disc cannot be written to. (Error code 0x80020042). I have successfully used these DVDs before the upgrade. The DVDs that I am using are TDK double layer DVD +R (Item code: DVD+R85AA).
Can anyone suggest a fix.

I have used cleaning kit from an audio/video store. It's basically a CD with a pair of brushes underneath. It has restored a failing optical drive in my tray-loading eMac several times.
But I have heard that these kind of kits aren't so good in slot loading laptops, because there is a chance of them getting stuck inside. I suggest contacting a local Apple certified service shop and seeing what they recommend.

Serious Error Shut Down when Burning DVD

When attempting to burn DVD, Premiere Elements 3.0 immediately says there has been a serious error and program must shut down. Video was captured from camcorder, is about 12 minutes, just a couple of scene buttons on scene menu. Using an HP 2.4 ghz quad-core PC with 3 GB ram. I'm using DVD burner in other programs with no problem.

Success---I followed some troubleshooting links and the one that worked was as follows:
4. Re-create the Premiere Elements PluginCache.
The PluginCache is a Windows registry entry that contains information regarding the status of all native and third-party plug-ins used with Premiere Elements. To re-create the file, hold down the Shift key while choosing Start > Programs > Adobe Premiere Elements 7.0. Release the key when the Select Initial Workspace window appears.
Thanks for all the help...hard to believe the fix is as simple as holding down the shift key as the progam starts!!

Error Code- 6 When Burning DVDs/ CDs- Any Ideas

I recently had a problem burning DVDs from iMovie due to an error code- 6 (whatever that is!) I had put this problem to one side for a number of months, on account of the fact I don't burn that many DVDs. I have now found the problem has spread to CDs as well.
Does anyone have any ideas on how I can solve this, or is it new drive time?
iMac G4 Mac OS X (10.2.x) 1Ghz Power PC

Hi Skinner,Welcome to Apple Discussions.
Firstly you can't burn DVDs from iMovie!
Under OS 9 Error 6 was an overflow error, although I can't confirm its the same under OS X it sounds like it could be a buffer overflow issue in iDVD. This would mean that the computer cannot supply the data to the drive quickly enough. Try the following things (which admittedly are undesirable but may be neccesary):
Close down all Applications not directly involved in what you're doing to free up processor time and memory.
Burn at a lower speed (choose 1x or 2x rather than 4 x).
Try different media those PC World branded disc may not be as good as a Verbatim.
Hope this helps
mrtotes

Error code -43 when burning DVD

When I try to burn a DVD this pops up. Thanks to anyone that can help.
The operation cannot be completed because one or more required items cannot be found.
(Error code-43).
Could not open the data fork of "<unable to get file path>"(-43).

Please tell us what burner you have. Look in System
Profiler > Hardware > Disc Burning.
You're using the Finder to burn?
A Google search on this error code turns up a lot of
topics. Some point to the media as the culprit,
others point to Tiger, some to the drive itself.
Fuji isn't a bad brand of media, but it's not
amongst the best, either.
Generally, an older burner can use 16X media, but
would obviously only be able to burn at the maximum
speed of the drive. It's possible that your drive
doesn't recognize the media code on the disc and
refuses to burn. Sometimes a firmware update to the
drive can solve this problem.
Here's the info under System Profiler>Hardware>Disc Burning:
SONY DVD RW DW-U10A:
Firmware Revision: A43h
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 8192 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
I'm trying to burn data onto a DVD disc as backup. How do I burn using Finder?
Also, Power Mac G5 Uniprocessor Firmware update 5.1.5f2 does show when I click on Apple>software updates. However, it does not have a check mark. Would this apply to my computer even though it does not have a check mark?

MSS - Business Event Details - Error Unexpected Exception when Calling RFC

Dear Experts,
Manager is getting the Error "Unexpected Exception when Calling RFC from Profile Application 'Business Event' when he tries to get the Training history of ONE employee in MSS. However, he is getting the details for the other employees of his department.
Any inputs on this?
Thank you.

I believe it is our custom iView that is incorrect.

Runtime error RAISE_EXCEPTION Exception condition "METADATA_MISSING" raised

Hi All,
I am facing a runtime error, while using transaction DSWP --> Set-up System Monitoring --> Copy Customizing -->
At that time we are getting "Runtime error RAISE_EXCEPTION Exception condition "METADATA_MISSING" raised
===========================================
Runtime Errors RAISE_EXCEPTION
Date and Time 25.07.2008 08:31:11
Short text
Exception condition "METADATA_MISSING" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "SAPLDSVAS_SERV" raised the exception
condition "METADATA_MISSING".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"SAPLDSVAS_SERV" or "LDSVAS_SERVC7I"
"MAP_DSVAS_TT_DATA_TO_TT_25"
or
"SAPLDSVAS_SERV" "METADATA_MISSING"
or
"RDSMOP_MAIN " "METADATA_MISSING"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "terra"
Network address...... "172.16.1.198"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "TERRA"
Database type..... "ORACLE"
Database name..... "DSM"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 23 2007 01:07:18"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 133
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8176
EM...... 37628064
Heap.... 0
Page.... 65536
MM Used. 31785376
| MM Free. 1656912
=============================================
Configuration:
OS :Windows 2003 server.
Solution Manager 7.0 SP15
Oracle 10.2
RAM - 2 GB
Its bit urgent, Please help out us.
Thanks in advance.
Best Regards,
Pratyusha

Hi
Check the SP level for ABAP and Basis. Download the latest SP level from SWDC and apply it on the system
This error is related to ABAP program.
Currently the latest available patch level is 16. Please download both ABAP and BASIS SP 16 and apply them on the system.

When i executed this class file i am getting runtime errors

when i executed this class file i am getting runtime errors
code is :
import java.awt.event.*;
import java.awt.*;
public class Test extends Frame
java.awt.Window w;
     TextField t;
     Test()
     t=new TextField(20);
     add(t);
     addWindowListener(new WindowAdapter()
                         public void windowDeactivated(WindowEvent ev)                               {
                              w.toFront();
                              System.out.println("hai");
     setSize(300,300);
     setVisible(true);
public static void main(String args[])
Test t =new Test();
after executing that class i am getting this errors
Exception occurred during event dispatching:
java.lang.NullPointerException:
at WindowEventDemo.windowActivated(WindowEventDemo.java:76)
at java.awt.Window.processWindowEvent(Window.java:612)
at java.awt.Window.processEvent(Window.java:576)
at java.awt.Component.dispatchEventImpl(Compiled Code)
at java.awt.Container.dispatchEventImpl(Compiled Code)
at java.awt.Window.dispatchEventImpl(Compiled Code)
at java.awt.Component.dispatchEvent(Compiled Code)
at java.awt.EventQueue.dispatchEvent(Compiled Code)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:68)
if anybody know how to pls help me

You are using w that you have not done anything with.
Add following code to the begining of your cinstructor:
w = this;
Then it should work.
//Anders ;-D

Portal Runtime error - An exception occured : when accessing the SRM Portal

Dear Consultants,
We are logging onto the SRM Portal using url link. SAP Netweaver 7.0
But when we are trying to access any tabs in the Navigation frame of the portal it is throwing an error.
Error - Portal Runtime error
An exception has occured while processing your request.
Can you please let me know how can I find the correct reason for the error.
regards
Arindam

Hi Arindam,
Pls check Default Trace log in the NWA tool, path would be NWA --> Monitoring --> Logs and Traces --> Select Default Trace.
Find the log messages with the Exception ID found on your Portal Runtime error. These logs would specify the exact cause of error.
Thanks,
Swapna Priya.

When i am posting the Outbound delivery,here getting Runtime error

Hello
         When i am posting the Outbound delivery,here getting Runtime error
This is error analysis report
Error analysis
    Short text of error message:
    No RFC destination is defined for SAP Global Trade Services
    Long text of error message:
    Technical information about the message:
    Message class....... "/SAPSLL/PLUGINR3"
    Number.............. 002
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Please give me solution for this

HI,
Probable some missing customising for SAP Global Trade Services - Plug-In.
Check with your functional consultant if the configuration is correct.
Check in SPRO.
Sales and Distribution>Foreign Trade/Customs>SAP Global Trade Services - Plug-In
Regards,
Ankur Parab

I'm getting "runtime error: unknown exception" when burning DVDs on PE12

Similar Messages

Maybe you are looking for