I'm getting the "spooler subsystem app has encountered and error" message

Greetings. I have one XP machine wired to a router, and one  Win7 Laptop connected wirelessly.  I install the printer driver for the Deskjet D2530 on the XP machine, and I can print. Then I install the printer driver for the Deskjet D2530 on the laptop, and go to "add Printer". I see the printer on the network, try add it, and the installation completes. Then when I attempt to print, the error message comes up on the XP machine. 
The next step was to try the "hp print and scan tool'. I ran it on the XP machine and NFF; on the Win7 laptop, it said there was a driver conflict and that I should uninstall the printer driver software, and install the "full featured" version. I did that, and no difference.
Any help would be greatly appreciated. Thanks

Microsoft has a fix for this on XP operating systems:
http://support.microsoft.com/kb/810894
if that link does not work look for this phrase on the Microsoft site:
Spooler subsystem app has encountered a problem and needs to close
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Similar Messages

  • The error is occured that Spooler SubSystem App has encountered a problem and needs to be close.

    When, I give the print option in my printer HP Laser Jet 1005, the error is occured that Spooler SubSystem App has encountered a problem and needs to be close. And the Computer is hanged. Kindly give me the suggestion to short out the problem. Kindly give me the reply in my e-mail I.D - {Personal Information Removed}

    For those who still have this problem, I found the solution on this forum -thanks MP2000 (see http://h30434.www3.hp.com/psg/board/message?board.id=Networking&message.id=839#M839)
    Go to the computer that the HP F4280 printer is connected to.
    Click on Start --> Printer and Faxes
    Right click on HP Deskjet F4280 and select Properties
    Click on Advanced tab
    Uncheck "Enable advanced printing features"
    click OK
    And it works!

  • Itunes has encountered and error message

    I have downloaded the quick time player and it is operating but I still am having trouble with Itunes error message and I can find the itunes standalone to download this is my mistake most likely but i need help

    hi sg73!
    I have downloaded the quick time player and it is operating but I still am having trouble with Itunes error message
    what are the circumstances under which you're getting your "itunes has encountered an error" message?
    the most common circumstance is when people launch itunes, but i've seen it happen at other times too. (importing a CD, downloading a video podcast, plugging in an ipod ...). when do you get it?
    love, b

  • "Spooler Subsystem App has encountered a problem and needs to close"

    I get this error when trying print over my wireless network with my new HP Deskjet F4280 all in one. Desktop hooked up ehternet to a D-Link WBR-1310 router, Laptop running wireless on router. Both computers running XP home. Setup network on both computers with network wizard, installed all HP software/updates on both computers.
    Tried connecting printer to the other computer and printing the other direction with the same results. Used HP live chat help last night with no results. Tried all the Microsoft automatic and manual fixes after searching for the error. Turned on printer sharing as usual.
    When the error occurs it stops print spooling service on the computer the printer is connected to directly. Printer works fine on which ever computer it's connected to, just have the problem when trying to print over the network.

    For those who still have this problem, I found the solution on this forum -thanks MP2000 (see http://h30434.www3.hp.com/psg/board/message?board.id=Networking&message.id=839#M839)
    Go to the computer that the HP F4280 printer is connected to.
    Click on Start --> Printer and Faxes
    Right click on HP Deskjet F4280 and select Properties
    Click on Advanced tab
    Uncheck "Enable advanced printing features"
    click OK
    And it works!

  • Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement: there has been an error occurred while connecting to Apple's online store try again

    Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement:
    there has been an error occurred while connecting to Apple's online store try again

    Best I have been trying for a week to order greeting cards using iPhoto but do I always get the same statement:
    there has been an error occurred while connecting to Apple's online store try again

  • The SkillSoft Course Player has encountered an error while communicating wi

    HI Friends ,
    I am getting following error while launching a SCORM Course from Learner sel service :
    Error ::
    ===
    The SkillSoft Course Player has encountered an error while communicating with the Learning Management System. As a result, your session will now be closed.
    =================================================================================================..
    Please do let me know how we can resolve this issue ..
    Thanks in advance ..
    Regards
    Vicky

    Hi Lee ,
    Thanks for your response .
    1. yes the courses are scormn courses . I generated PIF files through installer.exe given by the vendor and imported to the LO.and then created offering and class. So when employee lanunches the course for learner self service i am getting this error
    2.Even i have done borwser compabilty test.please the below output :
    SkillSoft Browser Capabilities Check.
    Your browser results have been saved to our server and can be accessed for the next 30 days using this URL.
    http://browser.skillport.com/bh/results.asp?resultsid=%7BFE8831C3%2D74EA%2D475D%2DAF1D%2D8B4D70CE609B%7D
    User Details.
    Your e-mail [email protected]
    IP Address 168.187.81.162
    Approximate Connection Speed 68,109 kbps
    Date and Time of Test 19 Apr 2011 02:08:59
    Proxy Via 1.1 webwasher (Webwasher 6.8.7.9396), 1.1 j5k-tec-69 (jaguar/3.0-11)
    Combined Technical Specifications (20110114) This test checks compatibility for a combined specification of SkillSoft Course Player, Simulation Player and SkillPort
    Test Operating System
    Result Pass
    Your Computer Microsoft Windows XP
    Test Browser Type
    Result Pass
    Your Computer Internet Explorer
    Test Browser Version
    Result Pass
    Your Computer 7.0
    Test Adobe Flash
    Result Pass
    Your Computer 10.0.22.87
    Test Java Environment
    Result Pass
    Your Computer Sun Microsystems Inc.
    Version 6.0 Update 18 (1.6.0_18)
    Test PopUp Blocker
    Result Pass
    Your Computer No PopUp Blocker Detected.
    Access a SkillSoft Support Representative in a one to one chat environment using our Live Help.
    http://support.skillsoft.com/livehelp/browsertest.asp?resultsid=%7BFE8831C3%2D74EA%2D475D%2DAF1D%2D8B4D70CE609B%7D&customerid=%7B293C989F%2DAA78%2D4D7E%2DA66C%2D0E2BDC6CBC07%7D&[email protected]
    The SkillSoft Online Customer Support Portal is a gateway to the latest technical support and how to information. Users can search technical support articles, view a list of FAQs or submit requests to SkillSoft Customer Service Representatives through an intuitive, easy to use Web form.
    http://onlinesupport.skillsoft.com
    ..please do let me know how i can resolve this issue
    Regards
    Vicky

  • [Anyconnect 3.0] "The VPN client driver has encountered an error"

    Hi,
    A computer get the following error when trying to connect: "The VPN client driver has encountered an error."
    In setupapi.log, we got this error:
    #-147 Loading class installer module for "Cisco AnyConnect VPN Virtual Miniport Adapter for Windows".
    #E358 An unsigned or incorrectly signed file "C:\WINDOWS\system32\NetCfgx.dll" for driver "Cisco AnyConnect VPN Virtual Miniport Adapter for Windows" blocked (server install). Error 0x800b0100: No signature was present in the subject.
    #E161 Processing of call to class installer failed. Error 0x800b0100:
    No signature was present in the subject.
    I already tried those solutions :
    - install this fix http://support.microsoft.com/kb/822798
    - repair catalog system http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00809b4754.shtml#asdqw
    Do you know a solution?
    Thanks for your help,
    Patrick

    Kashish,
    The user who got this problem solved it by replacing C:\WINDOWS\system32\NetCfgx.dll by another NetCfgx.dll file.
    He downloaded it from Internet (users don't fear )) but I would advice you to pick one from another computer...
    I think that his computer was corrupted...
    HTH
    Patrick

  • The Internal Concurrent Manager has encountered an error.

    Routine &ROUTINE has attempted to start the internal concurrent manager. The ICM is already running. Contact you system administrator for further assistance.afpdlrq received an unsuccessful result from PL/SQL procedure or function FND_DCP.Request_Session_Lock.
    Routine FND_DCP.REQUEST_SESSION_LOCK received a result code of 1 from the call to DBMS_LOCK.Request.
    Possible DBMS_LOCK.Request resultCall to establish_icm failed
    The Internal Concurrent Manager has encountered an error.
    Review concurrent manager log file for more detailed information. : 06-JUN-2012 00:51:22 -
    Shutting down Internal Concurrent Manager : 06-JUN-2012 00:51:22
    List of errors encountered:
    _ 1 _
    Routine AFPCSQ encountered an ORACLE error. .
    Review your error messages for the cause of the error. (=<POINTER>)
    List of errors encountered:
    _ 1 _
    Routine AFPCAL received failure code while parsing or running your
    concurrent program CPMGR
    Review your concurrent request log file for more detailed information.
    Make sure you are passing arguments in the correct format.
    The PPD_0606@PPD internal concurrent manager has terminated with status 1 - giving up.
    Edited by: sahil jain on Jun 6, 2012 10:10 PM

    Hi;
    1. What is EBS version?
    2. Did you check:
    Concurrent Managers Will Only Start on One Node in PCP/RAC Environment [ID 264296.1]
    Concurrent Processing - The Concurrent Manager Fails to Start on GSM Enabled Due to DBMS_LOCK.Request ResultCall Failed to Establish ICM [ID 245563.1]
    Regard
    Helios

  • "Premiere Elements 9.0 has encountered and error. [..\..\Src\EMS\WSEMSUtil.cpp.-602]"

    "Premiere Elements 9.0 has encountered and error. [..\..\Src\EMS\WSEMSUtil.cpp.-602]"
    Is the exact error message i get after i tried to reinstall my copy of Adobe Premiere Elements 9.0 because of problems with creating/loading any projects. How can I fix this issue as a second reinstall hasnt worked?
    Thanks,
    Xynos

    Xynos
    I am not familiar with that error message either. You originally posted on November 30, 2013. It is now December 8, 2013. Has your issue been resolved yet? If not, then I would offer the following troubleshooting scheme based on what you have written.
    1. Open a project. Go to Help Menu/Deactivate and Deactivate. Close out of there.
    2. Uninstall Premiere Elements 9 via the usual Control Panel Route.
    3. Run the computer through the ccleaner (regular cleaner and registry cleaning parts).
    4. Reinstall Premiere Elements 9 with antivirus and firewalls off.
    5. Reinstall the Premiere Elements 9.0.1 Update.
    Is the problem resolved.
    We may have to look deeper into your original reasons for troubleshooting the program
    i tried to reinstall my copy of Adobe Premiere Elements 9.0 because of problems with creating/loading any projects.
    We may need to distinguish between damaged projects versus a program that has become non functional.
    Please review and do not hesitate to ask for clarification on anything written.
    Thank you.
    ATR
    Add On...If there is any indications of a problem with Premiere Elements 9.0/9.0.1 Elements Organizer 9 we can look into deleting its settings file and/or creating a new catalog. But, I do not see any indications for this at this time.
    You might find this Adobe document on damaged projects of interest.
    http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-projects-premiere-element s.html

  • IMac: I try to save a file and get 'the action "Copy Finder Items" encountered an error.  Check the action's properties and try running the workflow again.'

    I keep on running into this when I try to save a download file. Any help would be appreciated.
    'The action "Copy Finder Items" encountered an error.  Check the action's properties and try running the workflow again.'
    I tried clicking the button to change the save but that has no effect.

    Hi All,
    I am having same issue too.  Can anyone you advise?  Thank you.

  • Itunes Has Encountered and error and Needs To close

    My troubles all started when i updated my 30 gb ipod using itunes 7, from that day forward...itunes would say my ipod is corrupted, and would not let me add anything to it, it told me i had to restore it.
    When clicking restore...it would stop 15secs into it and give me error 1418 saying, it could not be restored.
    I then took it back to apple and they gave me a new one.
    Now recently ive had new music put on my pc, so upon going to adding folder to add the music to my library, itunes will crash about 30seconds into it.
    And windows would say "Itunes has encountered and erro......."
    And yes i have followed the procedures to do a clean install of itunes, and its still crashing on me. The inability to not being able to add music to your ipod using windows explorer drag and drop is a pain in the a%^.

    Cory,
    Are you trying to install the Quicktime standalone installer or Quicktime as part of the iTunes installer?
    Let's get an installation log on the problem and send it to the Apple engineers.
    1. Turning on some advanced logging by creating a new file in your "Documents and Settings\<username>\Local Settings\Temp" folder with the name "QTInstallerLauncher.log". You might have to turn on "show hidden files" to find this folder. (Right click "my computer", select open, select Tools menu -> Folder Options. Select View tab, "show hidden files" radio button is in the center scrolling panel.)
    2. Start menu -> Run... In the text field of the dialog that comes up, type in "cmd" and hit return.
    3. In the command prompt dialog that comes up, find the Quicktime standalone installer on your desktop and drag it to this window. Then on the same line type in a space and then the following:
    /Verbose"c:\log.txt"
    There is no space between the e in Verbose and the double quote (").
    4. Hit return.
    5. The installer will create a log file:
    C:\log.txt
    and a file called:
    "Documents and Settings\<username>\Local Settings\Temp\QTPluginInstaller_9999.log" (number may differ). You may have multiple files like this..... Send them all, or at least the most recent ones.
    Find those files and send them to the apple moderator. Tell her Toonz sent you. It doesn't hurt to put the URL to this discussion thread, so that whoever gets it has some context.

  • Premiere Pro has encountered an error message

    Hello, I keep getting this message everytime I try to open premiere pro cs5. It says Premiere Pro has encountered an error
    [/Scully64/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/../..Src/DirectoryRegistry.cpp-2 83]
    Can anyone help me resolve this issue?
    Thanks, Brandon.

    The answer in my case was simple: if you use certain video converters (such as HandBrake) to convert video from a video camera to something Premiere can import, sometimes the converter sets the framerate to 90,000 frames per second (such as HandBrake does). (NOTE! I don't know which software is at fault, or if it's a combination of both, only the end results.)
    If you try and import that video into Premiere, one of two things happens: the video is at 90,000 FPS, and less than a second long... or the above error occurs, and in my case, Premiere crashes to the desktop. I've seen it do both. But in both cases the fix is the same ---
    If I go into the settings in Handbrake, and instead of leaving 'framerate' set on 'source', manually set it to (29.97, or whatever the source actually WAS)... then you re-encode it, and like magic - it imports into Premiere and no longer shows that error message.
    Note that in other video editing software, the same source files will work just fine.
    It's something specific to Premiere (or the video file, and how Premiere sees it) that causes this issue.

  • Help!  CS4 install - Mac - "Setup has encountered and error and cannot continue"

    Attempting to install CS4 Design Premium on PowerMac G5 with Mac OS 10.4.11
    Install with first DVD and gets about 80% across on the progress bar and it fails with a message "Setup has encountered an error and cannot continue".    Is there an install log created where I could get diagnostic messages to give a hint on what the error is?
    Any insight is totally appreciated!

    The worst telephone support I have ever experienced!   Pathetic.
    The first recommendation posted here in response to my initial inquiry was to contact technical support becaue it is "FREE".   I really suggest that you no longer make recommendations like that.
    The first call I was placed on hold 20 minutes after the technician told me "TWO' minutes.   I hung up the telephone because I could only assume I was placed back in the queue.
    The second call I had to spell my first name, my last name letter by letter to have the technician read it back to me letter by letter from a script, A=APPLE, B=BOY, B=CAT......   he also placed me on hold.   If had to spell my name, and he spell it back to me, how can I explain an error I am having, steps I have taken and have any reasonable expectation of a solution being translated back to me?   I hung up after being placed on hold a second time.
    The third call iced this pathetic excuse for support.    Again, at least six minutes spelling my name.  Another four or five minutes spelling the email address.    Repeating the error code three times, slowly word by word.   This call I endured for fourty minutes.   After the third time on hold I admitted I gave it Adobe's recommended course of support and threw in the towel.
    Understandable that it costs the company less to have this support done for pennies on the dollar overseas, but what about the cost to the customer who is left dead in the water with no faith in getting any help and wastes time and energy?    I guarantee you could have five hundred people lined up for one technical support job in the united states who would stay awake nites to learn and master the program and be pleasant to talk to and give the customer a sense of value!   As it is now, I feel only less than worthless as a customer trying to support this product.
    Can't fix this problem, so going oldschool on it and load a fresh copy of the os.

  • Spooler SubSystem App stopped working and was closed????

    Does anyone know what causes this problem and what I can do to fix it?

    It's a known problem. Do you have any HP printers installed? A quick fix, if you are comfortable editing the registry is:
    Start -> Run - Regedit -> HKEY_LOCAL_MACHINE -> SYSTEM -> ControlSet001 ->
    Control -> Print -> Environments -> Windows NT x86 -> Version -3 -> Remove
    All Printers From Here (Delete HP First See If that resolves the problem)
    That should fix the SubSystem App crashing, after you delete the registry entry, start the printer spooler and reinstall the printer drivers, most likely Vista will have these drivers built in.
    T520 4239-CTO
    T61/p 6459-CTO (Gone but not forgotten)
    A31/p XP Pro 1 gig memory
    A30/p XP Pro 1 gig memory
    TP600 Win 2K 288 mb memory
    701C Win 98 Don't ask

  • Get a "Blackberry Desktop Software has stopped working" error message when I click on the icon

    Here are the details of the error message
    Description:
    Stopped working
    Problem signature:
    Problem Event Name: CLR20r3
    Problem Signature 01: rim.desktop.exe
    Problem Signature 02: 6.1.0.35
    Problem Signature 03: 4dee095a
    Problem Signature 04: Rim.Common.Filesystem
    Problem Signature 05: 6.1.0.35
    Problem Signature 06: 4dee0876
    Problem Signature 07: 216
    Problem Signature 08: 1d
    Problem Signature 09: System.IO.DirectoryNotFound
    OS Version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    I have tried uninstalling the software and re-installing and I get the same thing each time.  Any ideas on how to fix this?  I can't sync my computer and my phone...thank you!

    See:
    * https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding

Maybe you are looking for