I'm getting this: Error: 4hdd/11/40000000 SATA (0,0)
I ran the Apple Start Up "D" test and it said Alert! Then is: 4hdd/11/40000000 SATA (0,0). Is there sometinhg really wrong????
There are problems with your HDD. Back up your data then open Disk Utility>First Aid and run verify and repair. See if that solves the situation.
Ciao.
Similar Messages
-
MacBook Pro Retina, AHT Error: 4HDD/11/40000000: SATA(0,0)
I have written this post to note a strange occurrence with my MacBook Pro, with retina display.
When I had connected my classic iPod to iTunes, I had received an error message telling me that I was only using a USB 1.1 port.
I knew that this was impossible, so I had run an extended Apple Hardware Test to see if I had any issues.
Sure enough, I had received the above error.
After a restart and a quick back up to save my data, I had performed the extended Apple Hardware Test 3 more times with no errors whatsoever.
This message is not to solicit the "head down to your local Apple Store or AASP" advice.
I am curious if anyone else has experienced such an issue and what was their ultimate outcome.
For reference, I have a 15-inch, retina, 2.7 GHz, 16 GB RAM, 768 flash drive MacBook Pro notebook. I am running 10.8.2.
Thank you!
LukeDThis is choice that is entirely within the OPs province. I certainly agree with your position that intermittent issues are exceedingly difficult to diagnose and address. Failure to recreate a problem does not mean that the issue does not exist.
The support article that you raise has a certain ambiguity contained within. It states: "looping can be enabled or disabled by pressing the L key" . Which is it? That aside, this is the first I have encountered this feature since it is not mentioned in any of the AHT articles that I have come across. The real question is, did the OP utilize this?
If I were in the OPs position and even considering the argument that you present, I still would make an appointment at the genius bar. Call me Chicken Little if you will, but the warranty is there to erase any doubts whether the MBP has issues or not. Apparently you would not, so I hope that we can agree to disagree on this issue.
Ciao. -
I get this error when i run diagnostic 4MEM/9/40000000 : 0x7f561d90
MacBook Pro 13-inch, Mid 2012,
2.5 GHz Intel Core i5
16 GB 1600 MHz DDR3
YOSEMITE 10.10
My computer started shutting down. error message stated Your computer restarted because of a problem. Press any key.
I get this error when i run diagnostic 4MEM/9/40000000 : 0x7f561d90 but can't find the error code reference.Check to see if your MBP has a kernel panic report. If so use these instructions and post it:
http://support.apple.com/en-us/HT2546
Ciao. -
4HDD/11/40000000: SATA(0,0) error on AHT, but not on extended AHT.
I have the mid 2010 15" i7 MBP (no hardware upgrades except a replaced logic board in 2014) and I ran the AHT which gave me the 4HDD/11/40000000: SATA(0,0) error. After this I ran the extended test but no errors were found. I ran standard AHT again and then got the same error.
Is this error something I can ignore or should I take my computer in for a diagnosis at the Apple Store? Thanks.We don't have charts to tell us what all the error codes mean. However, 4HDD is a hard disk drive error. If your drive appears to be working then I would take this time to make a bootable backup on an external drive just in case.
Clone Yosemite, Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive. -
i was getting this error whenever i tried to sync my ipod touch to itunes.. i had 10.5 version of itunes so i waited till apple updates it .today apple udated itunes and still after udating to 10.6 version i am getting this error please i have tried many things like download mobile me i uninstalled itunes and the reinstalled it but nothing seems to work please i haven't sync my ipod from last month and i want to sync some songs in it please please help..........................i have also tried to reset sync history from edit/preferences but nothing is working what should i do should restore my ipod touch or create a new id and start all over from beginning??please help....thanks
i tried searching more problems like this but everyone has given a link to a page which gives steps to solve this issue and i have already tried that before but nothing worked ...should i restore my ipod but i am worried that if i restore my ipod and if i cannot sync my ipod then i wont be having anything on my ipod.....do u any specific solution that can solve this issue 100%??
-
This is what I think may have happened. The other day, Thursday Sept 8th, I shut down my pc in the middle of a Firefox upgrade. Now when I try to access Firefox on my pc, I get this error message:
XULRUNNER Error: Platform version '6.0.2 is not compatible with min Version >= 6.0.1 max Version < 6.0.1
What is this about and how can I retsore access to Firefox on my pc?If you use ZoneAlarm Extreme Security then try to disable Virtualization.
Do a clean reinstall and delete the Firefox program folder.
* http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/869812]]
*[[/questions/869951]] -
When starting Mozilla Firefox 3.6, I get an error window which opens up additionally overtop my browser windows stating:
"Javascript Application"
followed with :
"Invalid username/password combination. If you continue to get this error, try entering your email address as your username."
Obviously it is happening with one of my email addresses/usernames & password combinations of which I know the username for (which I choose not to post here) and I'm not sure where to begin looking for a resolution to this problem.I was able to resolve this by disabling (under Tools - Add-ons) Yahoo! Mail Notifier
Hope this helps some of you also! -
What is it about InDesign CS5 that someone would get this error message?
Hi,
What is is about the .swf file that is generated from the InDesign CS5 interactive workspace that someone would get the following error message when they go to view the site I created?
"This file may contain newer information that this viewer can support. It may not open or display correctly. Adobe suggests that you upgrade to the latest versions of our Acrobat products blah blah blah."
The site doesn't seem to work for four Mac users, but works fine for at least one PC user.
I'm trying to figure out how to save the .swf file down to Flash Player 9, which I've done by exporting a .fla file, then adjusting the Publish setting in Flash CS5. But that throws a wrench into the works...all the animations go haywire by continuously looping and the scale of all the text elements on the first page is much larger than it should be.
Thanks, SteveJohn Black3 wrote:
Many of my songs in my iTunes Library no longer play. I get this error message: "The song xxx could not be used because the original file could not be found. Would you like to locate it?
this usually happens when a user moves or deletes files in the finder - a sure way to upset iTunes.
did you move or delete files in the finder ?
I cannot locate the song.
if you let iTunes manage your library, all your content will be in <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music (or media)/music. did you look there ? tried a spotlight search ?
if the files are really gone, and have been purchased from the iTunes store, see Downloading past purchases from the App Store, iBookstore, and iTunes Store. -
I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html
Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium -
I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie. -
When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!
Hi,
Please download the updates directly from the link below:
WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
Regards,
Sheena -
I have been trying to find a solution to this problem by browsing this forum but I can't seem to find a solution.
As many others have decided to do I want to copy my Aperature library to an external FW 800 drive as my laptop space is dwindling. It seems all you need to do is copy the Library from the finder which can also be revealed in the preference if Aperature. When copying it seems to transfer for a few seconds but then I get this error "The operation can’t be completed because an item is being modified." I have formatted the drive correctly and there is no issues with Aperature itself so why do you think I am having this error? What can I do to copy this Library to my external?Reboot your machine make sure Aperture doesn't start (as Lion is liable to do) and try it.
-
Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
RonSee Troubleshooting issues with iTunes for Windows updates.
tt2 -
I cant install or uninstall my itunes. I get this error 'the feature you are trying to use is on a network resource that is unavilable' Now ive seen the solutions on here but im using windows 8.1 and none of them work for me. Ive tried all options so please can someone help?
That doesnt work for me. I removed itunes through the windows cleaner method as shown in other posts and re-installed itunes. Now im getting this error
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 126)
Also my Microsoft office has stopped working after i deleted Itunes which is really strange.
Can somebody provide me a solution please.... -
every time i try to update itunes i get this error message The feature you are trying to use is on a network resource that is unavailable then asks me to find the folder containing the instalation package ITunes.msi
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
How do I add web app tags to web app fields and have them render correctly?
- I have a webapp field entitled "Status". - I have a webapp fields entitles "Status-Listed". - I want to have a tag in the description field that is {tag_Status-{tag_Status}} to where if the Status field is set to Listed the result will be {tag_Stat
-
No memory error message on my mac mini what do i need to do?
No memory error message on my mac mini when i try to update. What do need to do?
-
How do I disable/prevent tabbed browsing in ver 9 the way I do now in 3.6?
I am one of those folks who dislikes tabbed browsing and prefers to use multiple windows. This is a snap in version 3.6 which I am still using. The newer versions seem to place a premium on using tabs and some other things I also would rather not hav
-
Unable to find managed files in Aperture 3
Hi there, I have consildated the master files by copy them into the aperture library. The problem is that now aperture is now able to locate any of the master files. I tried to use the option of relocating the master file but it was impossible since
-
I have got a Trojan Downloder JQAC in FlasPlayer Updater, I have uninstall Flash Player in the programs but I can't uninstall in Windows\system32\macromed\Flash, what can I do to eradicate this Trojan, thank you for your answer