I'm going absolutely crazy

I've finished a project in FCE. The whole thing was shot at 1920x1080.
No matter what I do, I cannot get FCE to output this as a 16x9 HD file. It keeps adding letterbox borders onto a file that is already letterboxed. In other words, it's as if it's been letterboxed twice. Everything is squished. The resolution of the output DOES say it's 1920x1080, but it's squished.
The infuriating thing is that I was able to accomplish this once. I have a file on my desktop that was output from FCE. It is 16x9, the aspect ratio is correct. It looks beautiful. But I can't do it again, no matter what I try.
In the "Export using QuickTime conversion" screen, I've tried every combination of options I can think of. Nothing works.
Someone please help me.

Tom,
It didn't work after all. Now the video looks to be proportioned correctly, except that it's surrounded by thick black bars on all sides. The video is isolated in the middle with a lot of black all around it.
I don't know how to make a new sequence in AVCHD AIC 1920x1080. I'm assuming that's something I choose on the Easy Setup menu. But I don't have that choice in any of the popups. Where do I set this?
Also may be important to note that while I shot this in HD, I converted the files to .mov files with ClipWrap.
I see where to "Remove Attributes." What does this do? There are a list of choices. All the audio choices are greyed out, and most of the video attributes are too. I can only select Basic Motion, Distort, Filters, and Speed. They're currently all UNselected.
Thanks.

Similar Messages

New report confirms Samsung is making an absolutely crazy version of the Galaxy S6

The new S6, glass and metal loaded with RAM, can it be?
New report confirms Samsung is making an absolutely crazy version of the Galaxy S6

It won't be sold anywhere but Korea. Not many places outside of Korea are people willing to spend 1k+ for a niche device.

Hi i got a few free app before and did not download them completely and dont want to do this but they stay in my download list and start automatly when i connect to itunes store and going to crazy me how can i remove them from my account for ever please h

hi
i got a few free app before and did not download them completely and dont want to do this
but they stay in my download list and start automatly when i connect to itunes store and going to crazy me
how can i remove them from my account for ever
please help me
thank you

Try Here > https://discussions.apple.com/thread/4074945?tstart=0

Photoshop CS3 is not working with my Intuos suddenly!!! Pen goes in crazy lines instead of behaving?!

I am so frustrated tonight. My BRAND NEW Wacom Intuos tablet worked fine the last time I tried it, a couple months ago. I am running a Mac OSX with Parallels and Windows 7, which I run Photoshop CS3 on. It was doing fine but now suddenly I try it tonight and it goes crazy when I'm trying to paint with the brush--sensitivity is gone, it's just a thick line; more importantly, it won't behave!! The pen keeps spazzing and doing these retarded straight lines instead of going where I want it to go!!! It works perfectly fine outside of Photoshop, both on the Windows AND Mac side, so obviously this is a Photoshop problem. I've installed the latest Wacom Intuos driver for Win7 and it won't work. I've tried having Photoshop open first and then plugging in the tablet and I've tried plugging in the tablet first and then opening Photoshop. still no good.
Does anyone have any suggestions??

You installed the latest driver from here?
Drivers | Wacom
Also, resetting the photoshop cs3 preferences could help.
Press and hold the Shift+Ctrl+Alt (Shift+Cmd+Option) keys just after starting the launch of photoshop cs3.
Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop settings file
Press Yes because you do.

Freezes, Goes All Crazy or Displays Weird Colors

I have the latest 14 inch iBook (1.42 GHZ, 1G RAM) purchased at the end or Sept. 05 running Tiger 10.4.4 and these problems have been happening just about the entire time. I've never had it repaired and I just recently did an Archive Install to try and fix it but nothing.
Every day my monitor will get one if not all of these problems:
1. Big squares of a red to green gradient show up over icons, text, palettes etc. out of no where. When I switch out of the program with the squares and back in they're gone but it happens all the time.
2. My monitor will have a seizure; it's the equivalent of having the TV on the wrong channel, it going all black and white and making that loud noise. Mine's all different colors and doesn't make a noise but the rest is the same. I have to hit the power button and restart to get rid of it.
3. The last is the OS just freezes; it freezes about 4 times a day. I've done the hardware test and everything passed but nothing's changed.
I need my computer every day for work and can't spare the time to send it away to get fixed. I was hoping this was a common problem and there was a fix I could do myself before I have to ship it off.
Bah?

The last event was at 11:50 this morning. Machine froze and took about 3 restarts before it would boot back up without erroring out.
GeForce 8600M GT:
Chipset Model:          GeForce 8600M GT
Type:          Display
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0407
Revision ID:          0x00a1
ROM Revision:          3212
Displays:
Color LCD:
Resolution:          1920 x 1200
Depth:          32-Bit Color
Core Image:          Hardware Accelerated
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Built-In:          Yes
Display Connector:
Status:          No Display Connected

Netbeans 4.1 on xp, going abs crazy

java.net.BindException: Address already in use: JVM_Bind:8084
i have no idea why, i googled all around, but no one seems to have a solution.
I installed netbeans on 2 XP machines, one with SP1a and one with SP2
when i start tomcat that comes bundled with netbeans 4.1 for the first time it works fine. But if I stop and start again when i re deploy my application
it gives me the message java.net.BindException: Address already in use: JVM_Bind:8084
i know it means that the port is already in use, but what in the world is going on with netbeans 4.1 that would produce the same message on 2 fresh installed netbeans 4.1?!??I am just starting/stop/starting the server

In my case, I was able to resolve the issue. I had a servlet application. First time it works fine and the app gets loaded in the browser. Second time, if you don't close the browser and run the file, you will run into the jvm_bind error. If you close the browser and run the file, this problem doesn't happen. Quite interesting!

Going quietly crazy the hard disk disappears if I shutdown

I am having yet another try at getting SL to run this is the third complete wipe and reinstall. I have a bog standard iMac which runs fine on 10.5.8. The only software I have installed is iWork 09, iLife 09 and Libronix (Bible) for Mac.
Everything is fine as long as I don't shut down the system.It will reboot OK but if I shut down I get the grey screen with Flashing question mark folder.
I have spent two hours getting it to boot into the OS.
I tried safe boot, control + option + p + r, I have unplugged it making sure that only the apple keyboard and mouse are attached. Nothing worked.
I tried about a dozen time to get it to boot from the DVD which it did eventually but then couldn't detect the Hard Disk. Kept on trying eventually did detect the HD ran repair disk reported no problems, repaired permissions and selected the HD to restart which it did now typing this on the machine.
What on earth is going on this machine is less than a year old and I have never had so much as a freeze using Leopard.
Can anyone help I am tearing my hair out!!
Thanks
PS: I came over from Vista which is beginning to look delightful.

Steven,
It looks and sounds like you are Savvy.....
You have helped others or you wouldn't have 2 bars under your name...
I assume you have backups or you wouldn't have done 3 complete wipe and reinstalls.
This is the bottom line for me and what I would suggest as long as you have backups...
1. Wipe the HD clean... erase it.... fresh start....
2. Insert the Snow Leopard disk and install Snow Leopard only...... Nothing else. Do Not Migrate, etc..
Then give Snow Leopard a try all by itself with nothing of your old stuff or anything else added...
Try shutting down. Try restarting... Try Safari... etc.....
If that works, then something is wrong with something in your prior system or prior files...
Start migrating things over until you find a problem...
I know this may sound like it takes a long time but not really.
Sometimes we need to be like *PIT BULLS*..... don't give up.....
I don't really have any problems at all with Snow Leopard on the computers I have or the ones I have helped my friends upgrade other than a few minor things....

HT203171 Why does my laptop overheat and then the fan goes absolutely beserk!!!

Well basically after about half an hour of use the laptop starts to make a luder fan noise.
After 10 minutes of this the fan goes beserk - I mean beserk and it's quite scarry. Then the entire operating system fails and the system restarts. I tried resetting the PMU but it won't reset properly. I need some other way of fixing it.

Hello:
You need to take the computer in for diagnosis. There is a hardware issue, but no one can diagnose that on-line.
Barry

Mac going completly crazy

Sometimes when just surfing Safari or playing world of warcraft, the mac starts repeating the last millisecond of sound and it locks up. This happens at least once a day. I've reinstalled Leopard 3 times already, and I still have the problems.
When I turn the computer off by holding down the restart button and boot it again, I get no error report message. I've only gotten an error report message twice, and when I checked the report it says "panic".
My warranty is running out, do you have any suggestions or should I just ship it to service right away?

Ryum is running 10.5. Your issue may be due to installing 10.6.
Try posting in the Snow Leopard Usage forum.
DALE

Going Upgrade Crazy?

So after you guys were so much help with my USB problems!! Again Thank you so much! I've decided to try and throw down a few more upgrades on this bad boy! I want to add more ram and partition the drives so I can have OSX and 9.2.2! How would I go about doing this...
After reading a previously posted topic (which answers all my question, but also raises one!). Im not using an apple monitor at all! I have a flat screen connected via my ATI card!?!?!?!
Can I still install OSX without an apple monitor. A previous topic said "remove all PCI cards"???????
What would be the best version to go for?????
here are the comp stats again!
The machine is a beige G3
Mac OS 9.2.2
Machine ID 510
Rom Version $77D.40F2
PCI Slots-
A-1 Firewire Card
B-2 ATI Rage
B-3 USB Card
A pre-emptive thanks!!!
----Mike

Mike:
You asked how you would go about adding more RAM and partitioning the HD.
You can upgrade the RAM with three 256MB DIMMs for a total of 768MB. The DIMMs should be PC100 (or PC133). Buy from a reputable dealer that guarantees their RAM will work with OSX. Some choices
MacSolutions
Crucial
RamJet
The HD can be partitioned when you format the drive. I have an 80Gb drive in my G3, soon to be replaced with a 120Gb drive. Using Drive Setup in OS9 (since I'm using XPF to run Panther or Tiger), I partition my drives into 4 sections. Drive setup will allow you to designate how many partitions and what size each one is. I set the number of partitions and the size (keeping the first partition <8Gb for X) and then initialize the drive. After that, I usually install OS9 on the second partition, OSX on the first, application software on the third and the fourth is for data files.
A.

FMS don't read main.asc. I'm going to crazy. Somebody help me.

Hi. All.
I've search enough. and I've did my best for 3 days.
Unfortunately, I could not solve this problem.
If you help me, you can be my sunshine.
I'm developing Text Chat App using Flex4.6 & FMS 4.5.
I wanna count how many on-line users in.   I found some infomation by googling.
As a result of googling, I figured out I need SSAS(Server Side Action Script)
http://www.fmsguru.com/showtutorial.cfm?tutorialID=48
I followed what he did pecfectly. This source code is what I made.
UserCount.mxml
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009http://ns.adobe.com/http://ns.adobe.com/mxml/2009mxml/2009"
      xmlns:s="library://ns.adobe.com/flex/spark"
      xmlns:mx="library://ns.adobe.com/flex/mx"
      minWidth="955" minHeight="600" currentState="LogIn">
<s:states>
<s:State name="LogIn"/>
<s:State name="LoggedIn"/>
</s:states>
<fx:Declarations>

</fx:Declarations>
<fx:Script>
<![CDATA[
   private var nc:NetConnection;
   protected function button1_clickHandler(event:MouseEvent):void{
    nc = new NetConnection();
    nc.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
    nc.client = this;
    nc.connect("rtmp://192.168.0.5:80/livepkgr/");
   public function setUserCount(userCount:Number):void{
    userCountText.text = userCount.toString();
   private function onNetStatus(e:NetStatusEvent):void{
    if(e.info.code.indexOf("Success") != -1){
     currentState = "LoggedIn";
]]>
</fx:Script>
<s:Panel includeIn="LogIn" x="10" y="10" width="250" height="200" title="Log in to my app">
<s:Button x="89" y="64" label="Login Now!" click="button1_clickHandler(event)"/>
</s:Panel>
<s:Label includeIn="LoggedIn" x="150" y="136" color="#0E55F6" fontSize="20" text="You are now logged in!"/>
<s:Label includeIn="LoggedIn" x="151" y="94" width="214" color="#8C2222" id="userCountText" text=""/>
</s:Application>
main.asc
application.onConnect = function(client)
application.acceptConnection(client);
userCount = application.clients.length;
client.call("setUserCount", null, userCount);
1. I released this project.
2. I got released files.
3. I copied these files to FMS's webroot and main.asc file also.
4. I connected this server by remoted PC. I could connect. And I clicked the button.
http://xxx.xxx.x.x:8134/UserCount/UserCount.html
                     NO REACTION
5. So, I checked break-point setUserCount. This method is called by SSAS. I wanna know this method is called or not. But There's no break. That means main.asc is not working.
Pls let me know what is my mistake.
Thanks in advanced
Kevin.

Thank you for reply. Nitin.
I followed your explain.
But I can't connect to server.
When remote users connect to server, they connect http://<server-ip>/<app-name>/<app-main.html>/
This path is /fms/webroot/<app-name>/
NOT /fms/application/<app-name>/
I'm very confusing. Please give me a favor.
Thanks.
Kevin.

Screen suddenly goes color crazy and machine freezes!

Hi
Had a strange issue recently, the 2nd of such events which basically rendered my computer unusable. Started on Monday after a system update, screen started flashing colors and gradients of gray and then just froze. I reinstalled system software and everything seemed to be ok until about 1/2 hour ago, when it happened again. This time I took pictures and did a screen grab of the apple error report. I'm hoping that I have a software issue rather than a motherboard or other hardware related problem.
Ay advice?
thanks
DJH
I don't seem to be able to upload the error report graphic...

The last event was at 11:50 this morning. Machine froze and took about 3 restarts before it would boot back up without erroring out.
GeForce 8600M GT:
Chipset Model:          GeForce 8600M GT
Type:          Display
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0407
Revision ID:          0x00a1
ROM Revision:          3212
Displays:
Color LCD:
Resolution:          1920 x 1200
Depth:          32-Bit Color
Core Image:          Hardware Accelerated
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Built-In:          Yes
Display Connector:
Status:          No Display Connected

Hairless now and going completely crazy

I have posted this before but will try again. Trying to copy my audio (book) cd into itunes. I have: brought up itunes, put in cd, dismissed all dialog boxes (was told to do that by Aldoblog),selected all tracks (which were in contiguous and ascending order), chose advanced and.....join tracks is dimmed. WHY?????????????? It's not pretty here anymore....

Is this what you are doing?
http://docs.info.apple.com/article.html?path=iTunesWin/7.0/en/2597.html
What dialogue boxes are you dismissing? What do they say? Are they error messages?
Can you import the tracks by themselves, or is it not letting you do that either?
btabz

Going stir crazy......

A couple of months ago I created a newsletter page using dreamweaver, with the BC add in.
It looked good and seemed to work without a problem.
Now I want to make changes to this page using DW, but am unable to as the page now has :-

at the beginning of it.
I have searched and searched and searched to see if I can find what the problem is, but am really running into a brick wall with it.
So it is now time to seek expert opinions as to what the hell is happening.
Any clues, ideas, suggestion are greatly appreaciated.

Your HTML template is tied locally to a Dreamweaver Template. You have two options. 1) In the File pane of DW, goto the Templates folder and open up "E-Web.dwt" and make your changes there. Once you save it, it should prompt you to update the other pages and this will update your HTML newsletter template. 2) Goto Modify > Templates > Detach from Template. This will detach the newsletter from a template and you'll be able to edit it again but you remove the template dependancy.
Best of luck.

Going absolutely INSANE!!! Nokia 6110... how to wi...

I've been trying for the last few days to wipe my memory card clean.... I uploaded some themes that I no longer want on my phone but when I plug my phone into the computer and try to access the files through PC suit, it won't let me see them...
Does anyone know how to wipe your memory card clean???
Solved!
Go to Solution.

to format your memory card :
settings-> data mgr-> memory->options->format memory card
let me remind you that formating your memory card , will delete EVERYTHING on that card.
if you are trying to remove themes or apps that you no longer want, why you don't just uninstall them from the app manager instead of deleting the whole memory card.
Fear not those who argue but those who dodge

I'm going absolutely crazy

Similar Messages

Maybe you are looking for