I'm going crazy with the liquify mask. I can not turn it off or errase it
Whenever I want to use the Liquify tool I can not transform my image. The mask tool is all over the image and I can not errase it. If I click no "None" on the mask tab, nothing happens. I can modify the image though but, the part of the image that I work on desapears from my file (appears as a transparent section). I have to shut down my computer in order to make it work justo once! Please help me!!
Need a lot more details.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, including total VRAM installed, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you (not necessarily this poster).
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!
Similar Messages
-
Was updating my ipod touch and it was all going ok until the white apple with the bar came up and then itunes crashed out, it is still on with the white apple and i cant turn it off please help me this has been like this for 30 minutes
Did you try to reset by holding the sleep and home button until the Apple logo comes back again?
If this does not work, try to connect again in recovery mode: http://support.apple.com/kb/HT1808 -
I have a pioneer 50 inch plasma + I purchased new from the company back in 2005. I tried to hook up an Apple Tv to the pioneer receiver that came with the TV. I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu. I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV. I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
BobI could not access the Apple TV on the television. If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help! Any more suggestions would be greatly appreciated.
Bob -
What is going on with POP email? I can NOT retrieve email unless...
What is going on with POP email? I can NOT retrieve email unless*...I reboot AND reset!* I POP 3 Comcast emails and my own URL email. Never any problems on Entourage. Hourly issues with my new iPhone—and it's only been 4 days.
This is *unbelievably frustrating* and negates why I got the dang thing in the first place.
Does anyone have a work around? Is this a known bug (Apple) or am I missing something?
+*Plus as a side note I think there are too many clicks into the In Box. Just a usability thing I wish I could set myself.+
Message was edited by: sukibeanI have the same problem intermittently... Every so often, the iPhone goes into a mode where email just doesn't work until i shut down and reboot... Then it works fine...
Its not always the case, but I can't isolate the scenario which causes it to go into this weird mode... -
After moving from my home country (Poland) to the Middle East (UAE) with the same computer I can not get connected to Apple Store and iTunes Store. Any clue why?
Regards,
MaciekClick the round flag icon bottom right corner of the App Store window.
-
with the last update I can not longer connect my iphones to iTunes - Is there an update to fix this?
Hello wendellfromva,
The following article provides tips that can help get your iPhone to reappear in iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen -
i just got my ipad 2 and when i go to trun it on it has a picture with itunes prompting me to sync up. When i do this it does not sync up with my itunes. I can not turn my ipad2 on. Any one out there got any answers. Appreciate the help
The first thing that has to be done with a new iPad is to activate it via iTunes. What version of iTunes, and what spec computer, have you got ? The iPad's minimum requirements are (from http://www.apple.com/ipad/specs/) :
Mac :
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.2 or later recommended
(free download from www.itunes.com/download)
iTunes Store account
Internet access
PC :
PC with USB 2.0 port
Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.2 or later recommended
(free download from www.itunes.com/download)
iTunes Store account
Internet access
Edit : there is troubleshootin here :
pc - http://support.apple.com/kb/TS1538
mac - http://support.apple.com/kb/TS1591
Message was edited by: King_Penguin -
help me
My iPhone is in recovery mode and I do not see it on my laptop and on iTunes. Moreover, I can not turn it off and when I try it comes up all the time in the recovery mode.Hey Yan Heng,
Thanks for the question. It sounds like your iOS device is not recognized in iTunes for Windows, while in recovery mode. The following resource may help to resolve your issue. While you should run through each step, the specific information related to your symptom is outlined in Step 5 (If the device is not recognized while in Recovery Mode).
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M. -
How do I turn off I pod touch? The restore screen is stuck
Thanks for the assistance. I was able to restore my I pod after letting the battery run down. I then synced the I pod to my new computer. Most of the songs moved from the cloud to the actual I pod drive. But, many of them did not. I tried downloading them from the cloud on my I pod, but this didn’t work. Will I be able to restore the missing songs? Thanks, Cleveland.
Sent from Windows Mail
From: Apple Support Communities Updates
Sent: Sunday, November 9, 2014 4:52 PM
To: shircleve
You received a reply
lllaass has replied to your question. You can view the full discussion in Apple Support Communities.
I am trying to restore my ipod and it stopped moving before the restoration was completed. How do I re-set the ipod. I can't turn it off.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Correct Answer Helpful Answer
Use the buttons above to tell lllaass and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to lllaass, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support -
My i phone is buzzing and I can not turn it off. The screen is blank
My I phone is buzzing. The screen is blank . I can not turn it off
Try resetting it: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release. If it won't reset just let it discharge and stop on its own, the recharge it and see if it works again.
-
Deskjet 6127 -- All the lights are blinking; can't turn it off. Cartridges are stuck.
Has anyone had this problem? I have a Deskjet 6127, all the lights are blinking. I can't turn it off. If I unplug it and plug it back in, (which is what it says to do on the troubleshooting site) the lights continue to blink. The ink cartridges won't slide out. Any suggestions on saving this printer from impending doom?
Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
My ipad will not repond - the icloud backup notification is on the screen. I can not remove it by clicking on OK I can not get the slide to unlock or slide to lock to work either.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up
-
Help! I'm going crazy with the Export function!
I've spent all day googling and trying different methods but I keep having issue with the Export to Movie function in CS3. I have a short 2-minute long movie made of several video clips, cross dissolve transitions, and an mp3 for background music. Everytime I try to export it through File/Export/Movie, it fails with the "Error compiling video...". This happens to many formats available (Microsoft AVI, Microsoft DV AVI, Quicktime, etc.). The weird thing is that I was able to export it through Adobe Media Encoder. I tried several file formats this way sucessfully with the same project. I uninstalled and reinstalled a few times and it's doing the same thing. I'd really appreciate any advice to help me solve this problem.
Please provide
these details to help us help you.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ -
Problem with the printer or ink system. Turn printer off message.
A message on the printer reads that there is a problem with the printer or ink cartridges. I turned off printer several times, I have replaced cartridges. At the bottom it says to contact HP. What do I do to get my printer working again? I also need to delete other printers that are listed as ones that I can use. I don't have any idea about these other printers other than the HP printer 6700, All in one.
Hi , I understand you are seeing an error stating there is an problem with the printer or ink system. If you have completed the solutions presented in the following document I suggest calling us: HP Officejet Printers - 'Problem with Ink System' Error Message Displays on the Computer During Setup. To reach somebody in tech support, what you can do, is use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear. -
Problem with the DIR pin out - can not reverse my stepper motor..!
Hi,
I'm in trouble with the DIR output. I use PXI 7350 and the 7764 board.
My motor never changes direction and the signal DIR stays at 0 volts even I create motor cycle through MAX (or through a Labview example).
Test I've already done:
- I try to change the drivers output to "open collector" instead of totem. Ten the DIR output stay at 5 volts even I use MAX motor cycles.
- I try differents AXIS with my 7350 same problem
- I test my power driver board controler and I can reverse the motor if I apply directly 5 volts on the DIRECTION PIN of this motor controller.
I'm gonna be nervous...
thanks for help !
-damienLooks like you took a STEP in the right DIRECTION!
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~
Maybe you are looking for
-
ALSA - sound with multiple programs at the same time
Well, I followed the wiki page about this, (http://wiki.archlinux.org/index.php/Allow_multiple_programs_to_play_sound_at_once#dmix_-_Alsa.27s_software_mixing_system.), and it worked. Well, for starters at least. But then it stopped working, just like
-
Tax code maintained as ZERO, then also tax has been charged in billing docu
Tax code maintained as ZERO, then also tax has been charged in billing document. Please help to find some solution Point will be rewared accordinly.. DAVID
-
Any way to change the duration of multiple clips in the timeline at once?
Title says it all Thanks
-
Photoshop CC fully updated will not show libraries in window drop down
I am using PScc with the latest update and trying to access my libraries for the files saved by my i phone apps. The issue is when I go to the window drop down in PS there is no option for "Libraries"
-
BSP-i want in white color font of the letters inside the table .
Hi friends' I have a blue color background in my bsp screen . I used table for output display. All are fine . Default the data in table display black color . But i want in white color font of the letters inside the table . Moosa