I'm guessing that my Powermac G5 Quad running 10.4.11 does support extended desktop.  My present monitor is a 1600x1200.  Can a second monitor of smaller size and lower resolution work as an extended desktop?

I'm guessing that my Powermac G5 Quad running 10.4.11 does support extended desktop.  My present monitor is a 1600x1200.  Can a second monitor of smaller size and lower resolution work as an extended desktop?

It should easily.
Power Mac G5: Display Compatibility
http://support.apple.com/kb/HT2707?viewlocale=en_US
Display Support:
Dual Displays*
Resolution Support:
2560x1600
Details:
Apple advertised that this system can support "two Apple flat-panel displays for each graphics card installed". The default graphics card can support "up to 2560 by 1600 pixels" with the dual-link DVI port and "up to 1920 by 1200 pixels" with the single-link DVI port. It also can support analog resolutions "up to 2048 by 1536 pixels".
http://www.everymac.com/systems/apple/powermac_g5/stats/powermac_g5_quad_2.5.htm l
"Quad Core" (2.5)
Video Card:
GeForce 6600
VRAM:
256 MB
Primary Max Resolution:
2560x1600
Secondary Max Resolution:
1920x1200
Display Connectors:
1 dual-link DVI
1 single-link DVI
http://www.everymac.com/systems/apple/powermac_g5/faq/powermac-g5-adc-ports-dvi- ports-resolutions-supported.html

Similar Messages

  • The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I'm very computer literate and am pretty sure the problem is on your end.

    The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
    I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?

    Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
    https://wiki.mozilla.org/Mobile/Platforms/Android
    Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
    Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
    (Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

  • Need help! I can't listen music by my headset and the loudspeaker works well, what should i do ?

    Need help! I can't listen music by my headset and the loudspeaker works well, what should i do ?

    if you mean that you can't listen to music from the headset and from the phone speaker at the same time then that is by design works the same with all things really such as computer and the likes too
    if you mean that the device does not play out of a connected headset only out of the speaker then you have a hardware issue with the headset detector you can read more about it here even though most have the opposite issue but it's the same issue really
    iPhone stuck in "headphones" mode

  • Can I use my iPhone in Europe and will it work as a hotspot for my iPad?

    Can I use my iPhone in Europe and will it work as a hotspot for my iPad?

    It didn't work for me during my February 2013 visit to Switzerland. The Personal Hotspot feature on my iPhone 4S works fine when I am in the US. Upon arrival in Switzerland, my phone connected to the Swisscom network. Phone calls, SMS, Web, and E-mail worked fine on the iPhone. Funny is the Personal Hotspot feature completely disappeared from the settings menu while there. It reappeared once I was back in the US.

  • I've noticed on my new ipad 4 that many images when on the Internet are blurred and low resolution why is this? Because if you go on apples website everything is crystal clear????

    When using my new ipad 4 retina display when on the Internet many of the images are blurry or low resolution? But if you go on apples website everything is crystal clear?? Why is this?

    Ebay images look fine on mine. Image zoom doesn't work, but that's not suprising. I also support a number of public and private websites wth a number of images (some pretty large). Those look fine as well. If the Apple website looks good, there is no raeson other sites shouldn't as well.
    For eBay specifically, I'd recommend using its app, but in general, you could try a reset: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

  • Can I create a form in muse and have it work with a different hosting service?

    I contacted a hosting service that I need to upload the site I built in MUSE to. (Hosting has already been purchased). I asked OMNIS:
    I want to create a form with Muse and then upload my site to OMNIS, not muse, the forms will display as I designed them, but they will not  function. I have someone to help me who is experienced in working with code. I can use Muse to export my site and then open the files in an HTML editor. "Update the source code of the form to make it compatible with the form processing technology used by your hosting provider (OMNIS) before you upload the files to their server." Can you help me with this? Do I need to get a script or something from you?
    OMNIS ASKED me:
    What are MUSE's site requirements?
    I will be building other sites and my clients may want to have the site hosted elsewhere. Can you give me the easiest way to deal with forms?

    Thank you for getting back to me Morgan.
    I read in another forum:
    There's a handy piece of software from CoffeeCup Software called "Web Form Builder". It's pretty affordable and easy to use and it can be hosted on the server of your choice provided that server uses an up-to-date PHP script.
    This is what I have been using....but I would rather not have to deal with a third party form builder at all.
    Do you reccommend this?

  • I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

    I have the airport express as router can I buy the new airport express and extend my net?

    Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
    If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
    If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
    You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
    If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands.  The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

  • Slow WiFi transmission and low signal power (Airport Extreme extended by Airport Express)

    I am experiencing slow wifi transmission between my notebooks and my base stations and I am hoping someone can help me fix it.
    My wifi configuration is the following:
    1 Airport Extreme base station (acting as router, wifi "creator" and DHCP server)
    1 Airport Express base station (connected to Airport Extreme with a LAN cable, set up to extend wireless network)
    1 Lenovo T410 notebook with Intel Centrino Ultimate N-6300 AGN WiFi antenna (I will call this one "Lenovo"), connected to wireless network, running Windows 7
    1 MacBook Pro purchased in 2009 (I will call this one "Mac"), connected to wireless network, running Mac OS X Lion
    1 QNAP T209-II NAS, connected to Airport Extreme via UTP cable
    Airport Extreme (AXTRM) is creating a 802.11n wireless network with WPA2+PSK security with MAC address filtering. The other base station, Airport Express (AXPRS) is connected to AXTRM via a UTP cable. AXPRS is set to extend my wireless network.
    My first problem is low signal power. My appartment is 90m2 in size and is in one floor. It is a new flat with high ceiling and modern layout, meaning little walls, big rooms and wide corridors. Still my notebooks, iPhones and iPad can barely reach AXTRM when I am on the other side of the flat. This was the reason why I purchased AXPRS and placed it in the middle of the appartment. My notebooks are placed just on the other side of the AXPRS's wall (less than 1 meter of distance and a simple 10cm brick wall in between), yet signal strength is only at about 80% (measured on my Lenovo using Lenovo Access Connections tool).
    My first question is: Is it normal that in a 90m2 flat with not unusual obstacles, I need 2 base stations and even then have a rather poor reception?
    My second problem is even more disturbing. I think I have catastrophic transfer speeds via wLAN. It takes over 1 hour to transfer cca. 1GB of files (average size 8MB) from my Lenovo or Mac to my QNAP. My Lenovo is showing about 250kb/s transfer rate when copying files. At the same time, Windows 7 show connection speed 144Mbps. This mean about 18MB/s. I know these numbers are theoretical and that actual transfer speeds are lower. But hey, 72 times lower? Furthermore, if I copy files from my Mac and my Lenovo at the same time, transfer speed is slightly lower. On the other hand, if I connect my notebooks to AXTRM via LAN cable and copy files to QNAP, transfer speeds are a few megabytes per second.
    To make things even more confusing for me: if I transfer files from the internet, I get download speed at about 700kb/s, which is quite in line with my internet download speed. I don't understand why transfer speeds within my local network are so much lower.
    Therefore, my second question is: How to set up my base stations and my routers to get a decent wifi connection?
    I hope someone could help me. If you need any more information, just ask. Thanks!

    From my experience of setting up the Airport WiFi for family members and friends, I have learnt the following :-
    1. Airport Express is not as good as Airport Extreme, for being as extender, the difference can be quite a lot.
    2. There is always a dead cornor (bad reception) in a house
    3. Even moving the Airport Extreme / AE a few inches, the performance can be improved quite significant
    4. If possible, always choose 5G 802.11n than 2.4G, unless there are many thick walls.
    My suggestion will be as follows :
    1. Moving out the AEBS out of a closet, is a good idea
    2. Always try to locate the AEBS in the centre of a area, instead of the two sides
    3. Try to test the AEBS without an extender, and find the best location area (don't place on the floor, neither above 6 feet height)
    4. After finding a best location, set the extender closer to the AEBS, and then moving apart from it (check the performance after every move), it is better that both devices can face each other.
    5. I can't tell you the reason, and some people may not agree with me, the new 2013 Airport Exteme performance is better and may be is a good idea to replace your Airport Express, and use it to connect with your router, and old AEBS as an extender
    6. Some Powerlinks (in case you can't use a wired ethernet connection between the two devices) work and some don't work with Apple Airport products, therefore, if possible, have an option to return them to the shop if they do not match
    Good luck

  • Since last software update I can't sync Outlook Calendar btwn Q10 and laptop (it worked perfectly before update!)

    I can sync my contacts, but get the same error msg each time I try to sync my calender (which is crucial for me). Error msg is: Unable to process organizer data
    I've looked in the BlackBerry Knowledge Base and their Resolution is:
    This is a previously reported issue that is being investigated by our development team. No resolution time frame is currently available.
    Any suggestions from the BB Forum would be appreciated!
    Thanks!

    Java_Junkie8121 wrote:
    Just wanted to let Adobe know.
    This is a user-to-user forum; if you want "to let Adobe know" you have to go through other channels, e.g. a bug report at https://bugs.adobe.com/flashplayer/

  • Can't install bdbxml on Fedora? and have it work?

    Hi,
    This is following on from this: Error trying to import python dbxml package
    And there is a similar thread here: Linking Problem
    System: fedora15 x86_64
    Initially I had everything working and it was going great. The python bindings even looked to be working. However, I then logged out of my root shell session and it all started going wrong:
    1. The python bindings no longer worked
    2. I could no longer start dbxml through /install/bin/dbxml even as the root user.
    3. the whole thing stopped worked and put out lots of errors referring to the xerces .so object.
    So I then tried to completely uninstall and reinstall again -- because obviously somtehing was not happy -- and I've got this error during the build process:
    ..../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `u_toupper_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `uset_serialize_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `uset_setSerializedToOne_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `u_charType_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `uset_getSerializedRangeCount_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `ucnv_close_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `ucnv_fromUChars_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `ucnv_toUnicode_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `u_init_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `ucnv_fromUnicode_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `u_foldCase_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `u_tolower_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `UCNV_FROM_U_CALLBACK_STOP_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `uset_close_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `ucnv_getMinCharSize_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `uset_getSerializedSet_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `UCNV_FROM_U_CALLBACK_SUBSTITUTE_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `ucnv_open_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `ucnv_setFromUCallBack_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `ucnv_openU_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `uset_openPatternOptions_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `ucnv_getMaxCharSize_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `uset_getSerializedRange_48'
    .../dbxml-2.5.16/install/lib/libxerces-c.so: undefined reference to `ucnv_toUChars_48'
    collect2: ld returned 1 exit status
    make[1]: *** [dbxml] Error 1
    make[1]: Leaving directory `/var/tmp/dbxml-2.5.16/dbxml/build_unix'
    make: *** [all] Error 2
    So now it simply won't build!
    Also trying to use the non-default (upgraded) versions of xerces or xqilla simply doesn't work because they don't have a particular function in them or something
    Edited by: LondonAli on 30-Nov-2011 11:33

    Hello,
    It sounds like running buildall.sh did not resolve the unresolved symbols.
    Could something have gone wrong with the definition of
    LD_LIBRARY_PATH or equivalent environment variable used
    on the OS which the linker uses to resolve library dependencies?
    If you run:
    nm dbxml-2.5.16/install/lib/libxerces-c.so
    and grep for the unreferenced symbols it should give a clue as
    to which library contains which symbols and you can verify if that
    is in your library path.
    Let me know if that does not help.
    Thanks,
    Sandra

  • Trying to embed a wmv video in website to work with Firefox. Video works but the controls appear then disappear. How can I get the cotnrols to show and stay. Works in all other browsers.

    Here's the code I used:
    <pre><nowiki><p class="bodytext"><OBJECT id='mediaPlayer' width="320" height="240" class="imageright"
    classid='CLSID:22d6f312-b0f6-11d0-94ab-0080c74c7e95'
    codebase='http://activex.microsoft.com/activex/controls/ mplayer/en/nsmp2inf.cab#Version=5,1,52,701'
    standby='Loading Microsoft Windows Media Player components...' type='application/x-oleobject'>
    <param name='fileName' value="video.wmv">
    <param name='animationatStart' value='true'>
    <param name='transparentatStart' value='true'>
    <param name='autoStart' value='true'>
    <param name='ShowControls' value='true'>
    <param name='ShowDisplay' value='false'>
    <param name='ShowStatusBar' value='false'>
    <param name='loop' value='false'>
    <EMBED type='application/x-mplayer2'
    pluginspage='http://microsoft.com/windows/mediaplayer/en/download/'
    id='mediaPlayer' name='mediaPlayer' displaysize='4' autosize='1'
    bgcolor='black' ShowControls='true' showtracker='1'
    ShowDisplay='1' showstatusbar='1' videoborder3d='0' width="320" height="240"
    src="video.wmv" autostart='1' designtimesp='5311' loop='0'>
    </EMBED></nowiki></pre>
    Also tried showcontrols=1

    I had this exact problem too. Unlike IE, firefox wasn't scaling the video to fit into the height and width I defined. As a result the controls were disappearing off the bottom.
    I found that by making the height of the window 50px larger than the videos native height, the controls were displayed permenantly. Since the other browsers scale the video to fit the window, this solution works for them all.

  • Can't complete Windows 7 installation - mouse and keyboard wont work

    I'm trying to install Windows 7 on my new iMac and am running in to a problem. I have the comprehensive instructions document printed, and am following it. I've created the partition for Windows using Boot Camp Assistant, I've inserted the Windows CD and selected Start Installation in Boot Camp. The computer restarts and loads up from the Windows CD. All good so far. It loads some Windows files and then the installation options pop up asking me to select language, country etc. Its here that I get stuck, as my iMac's wireless keyboard and magic mouse have stopped responding.
    I thought I must have missed something and have reread the instructions, but there's no mention of the iMac's peripherals not working during the Windows installation. What am I to do? I don't have any other USB mice or keyboards to hand if that's the solution.

    Just a follow up question on this - does the size of the partition have to just be enough for the windows installation itself, or for all programmes you would want to install to run under Windows?
    I've set the partition size at 32gb for a windows 7 installation, but im thinking if it has to be big enough for my games collection i'll need to start over the partition 50/50.

  • Can synced lights, a wireless shutter remote and live mode work at the same time on the Canon600D?

    I have a pair of synced lights connected through the hot shoe, and I'd like to use live mode and a wireless shutter remote to take self portraits from a distance... is this possible with the Canon600D? (Rebel T3i)
    I'm finding that turning on live mode stops the lights from flashing, and even with it off, the lights won't flash if I use the remote to take the photo.
    Help would be very appreciated! 

    Did a quick search, I don't think the 600D has the 'silent shutter' option.
    But I might be wrong, it might only be manual only flashes that don't fire in Live View, TTL flashes (any brand) may work.  Maybe it has something to do with the mirror being locked up.   Regardless, a wireless trigger will behave the same as a non-TTL flash, so it's not going to work with off camera flash.
    However, I think that Magic Lantern has a fix for it.  Might look into that if it's something you need.  That said, I've taken hundreds, probably thousands of photos of myself without Live View.  Just tether to a laptop/tablet and you can see the results after you take the shot; adjust accordingly.

  • Is there a limit to the size and/or resolution of an image that iPhone can display?

    I navigated to a url of a PNG with a file size of about 3MB and resolution of 5050×2383px. When I was viewing it in Safari, I was able to zoom in all the way just fine. However, after saving the image and viewing it through either iPhone's native Photos app or an app called Photo Viewer Lite, I realized the the image was displaying at about half its original size. I was unable to zoom in all the way. I plugged the device into my PC to see if the image was saved unmodified and it was.
    Could you please clarify this.
    Thank you.

    Thank you for getting back to me on this...  my slides are set for 1024 x 768 does making it that size reduce the mega pixels of the image?  The slide show I have going now is 3.88 GB is this to big for Keynote... things are really running slow here...
    thank you
    Mark

  • Can't 'open' any pdf but 'save and open' always works

    I have installed the latest versions of Win7 and Acrobat, without any improvement.

    Actually, provide the specific steps you are using. The problem may be an OS option, not Acrobat. To say you can not open the PDF, we would normally assume you have opened Acrobat and selected File>Open. If that is not the case, be specific about what you are doing.

Maybe you are looking for