I'm having a graphics glitch in Yosemite.

Hi,
I just installed the update for Yosemite OS (10.10.1) on my 2013 MacBook Air, and my screen graphics started going weird. This is the first problem I've really encountered with Yosemite. The most the graphics effects is Google Chrome, I cannot scroll as the display becomes so bad it is unable to read the screen. The glitch also slightly occurs when swiping between full screen desktop modes. Any suggestions? I've already turned off "Reduce Transparency" in Accessibility, and it has done absolutely nothing.
This is extremely frustrating! Someone help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

Why am I having major graphical glitches when running windows 7 on my mid 2010 mac book pro

I installed windows 7 on my mid 2010 macbook pro 13". It does not seem like I can tie it to any specific update or driver update. Has any one else noticed this. I found switching to the basic theme has stop the start menu and bottom task bar from glitching out but I can't view anyhing on the web in either windows explorer or firefox. The funny thing is I can log in and play Eve Online with out any issues. It seems to only affect the window pains themselves and anything i try to view on the web.

Yes i did install it when i finished the windows installation. I am thinking something happened during a windows update

NMP - Graphics glitches, Logic UI slowdown

So I've been having weird graphics glitches with my new Mac Pro (Late 2013). That, along with Logic X having MAJOR UI lag problems. I've asked around a lot on the Apple Logic forums and third party forums too, no dice.
My computer is the 8-core, with dual D300 GPU's. I took the computer in to the Genius Bar and they had it for a whole week, then told me they couldn't reproduce the issue but that my memory showed up bad after they tested that. I switched out the memory... same thing still happening.
I thought it might be to do with my 27 inch cinema display, so I switched that out for an HP display, no change.
What can I do here????

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Yosemite 10.10.1 major graphic glitches

Macbook Pro retina 15
Just upgraded to 10.10.1 this morning. Shortly after upgrading in the middle of workflow, I had a bright pink momentary flash on the screen and afterward, I am troubled with major graphical glitches system wide.
These are most apparent in iPhoto and finder.
iPhoto does not display anything within the display frame. The entire frame outside of menus is black.
in Finder cover flow view, all images are 4x their normal size, so I only see the bottom left corner of the images. Seems like a retina display issue.
Thanks for any help.

Somewhat similar graphic problem with Yosemite 10.10.2. My problem is that the screen gradually goes mosaic with small tiles, often of the background image. Seems to happen most often when iPhoto is open and running. One sample is attached. Been to the Apple Store twice. They replaced the graphic card to no avail. They ran it through the usual suspects. Apple reinstalled the OS, twice, and I gradually put most apps and files back that I need. Didn't do anything. Any thoughts will be greatly appreciated.

Experiencing random graphical glitches in MacOS 10.10 Yosemite

We have several users that experience random graphical glitches. See screenshots below for some examples.
They all use iMacs from between 2012 and 2014 with Yosemite.
The glitches only appear in Photoshop CC, not CS6 or any other programs.
They have these graphics cards:
NVIDIA GeForce GTX 775M 2048 MB
NVIDIA GeForce GTX 675MX 1024 MB
NVIDIA GeForce GTX 660M 512 MB
NVIDIA GeForce GT 755M 1024 MB
NVIDIA GeForce GTX 680MX 2048 MB
I've tried the different settings under Performance -> Advanced Settings -> Drawing Mode, but no change.
Also tried resetting the prefs and changing the color profile settings.
It happens irregularly or at least I haven't found any pattern yet.
Has anyone seen these kind of glitches before?

MacOS 10.10 has some widespread video card driver problems that show artifacts like this. They affect many applications that use the GPU, including Apple's own.
Apple is aware of these driver bugs, and working on solutions.

Macbook pro (2010) having graphical glitches after Mavericks update

What is your take?
graphical glitches appear and disappear randomly. Didn't have them before Mavericks update!
Thanks a lot for the help

15” MBP Mid 2010 models have been recalled for GPU issues. See https://discussions.apple.com/docs/DOC-5681.
Official Apple statement: http://support.apple.com/kb/TS4088
Print out a copy of your kernel panic and a copy of this Knowledge Base article and go to an Apple store or Apple Authorizes Service Provider with your machine and the documentation.
Genius reservation http://www.apple.com/retail/geniusbar/ .
or find an Apple Authorized Service Provider https://locate.apple.com/country
If it has been three years since your date of purchase then you are past the date covered by the recall but sometimes they honor it anyway.
More on this from another thread: https://discussions.apple.com/thread/5763560?tstart=0

Graphics nightmare after Yosemite upgrade on Macbook Pro and iMac

I have upgraded my 2013 iMac and my 2012 Macbook Pro Retina to Yosemite.
I am getting endless graphics glitches and crashes on both machine on all programs.
I've attached a screen shot from my Macbook Pro today.
I have updated the NVIDIA drivers on both machine and no difference.
Any help appreciated as I don't want to revert back to Mavericks (which was perfect)
Thanks

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS5ServiceManager com.adobe.fpsaud com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.Java-Updater com.oracle.java.JavaUpdateHelper ' ' 879294308 1083382502 1274181950 464843899 1233118628 3301885676 891055588 998894468 695903914 1106243579 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' '/\./p' '/\.appex\/Contents\/Info\.plist$/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Graphical Glitches: Objects appear not selected when they are, Symbols not appearing correctly

I've been having a ton of graphical glitches with Adobe Flash CS6 and I can't for the life of me figure out for the life of me.
Things that happen:
Objects will not appear selected when using the Free Transform Tool.
Symbols don't appar in scene when pasted, or dragged in until I leave the scene or symbol im in. They show up in the preview window though.
Something else I've been noticing is that when I use the Pen tool my computer or speakers or something making this werid noise and it only happens when I'm using the Pen tool.
Any help would be greatly appreciated.

No one has had these issues? I just got another one. My timeline disappeared, I don't mean the menu hid or thats it not there. It's there its just not actually displaying the Timeline or at least it didn't till I wen't back a few changes for some reason. It was still there though as I could click the eye and lock and the layers (which ones I have no idea) it was all grey. Also again the selection area doesn't show up, all movements of symbols are slow to update their postitions and when I turn on outlines it does nothing.
Also everytime I close Flash I get an error from windows, no idea why.

Severe Safari graphical glitches MacBook Pro Retina 15"

Hello. I have been having these annoying glitches since the day I bought my MacBook Pro Retina 15" on December 2012. These are not those almost invisible glitches present on the support topics currently. They are incredibly large, sometimes filling an entire webpage with a blank rectangle or parts from other pages (even tabs that were already closed).
I am absolutelly sure this is something to do with the crappy Intel HD Graphics 4000 board, because these gliches only occur while I am with the "Automatic graphics switching" option selected.
I have also noted this only happens on websites that use a lot of javascript animations.
Let's put this in topics:
The problem happens when:
Using automatic graphics switching (using Intel HD Graphics Board)
Using Safari 6.0.2 and Mac OS 10.8.2
Browsing websites with heavy javascript animations
The problem disappears when:
NOT using graphics switching (using Nvidia board)
Using any other browsers (tried Chrome and Firefox)
What I have tried and did not fix my problem
Fixing permissions
Resetting the SMC
Here are some examples:
And now some examples with the graphics switching off (Using the Nvidia board)
Any advice would be very welcome. Thank you for reading!

Apple - Feedback
Have seen similar lines and artifacts on Safari on my 13" MBP. It's a software bug and based on your additional findings, linked to bad drivers for the Intel 4000 chipset. File your findings with Apple on that Feedback page for your respective system. Make sure you provide all the info like you did here. Someone will eventually see it and add it to the engineering things to fix if it hasn't already been addressed in the soon to be released 10.8.3 build.

Graphics glitching... Logic X or GPU?

I have the new Mac Pro Late 2013, 8-core, with D300 graphics cards. 64GB RAM.
I've been having lots of UI lag using Logic Pro (Logic always has issues though..), but I've also had crazy graphics glitching. It very much looks like a failing graphics card.
Thing is, I took the computer into the Genius Bar, they tested it for 2 weeks, said my graphics card wasn't the issue and that it's my memory. I replaced the memory (it's from OWC), and ran MemTest for four days. No errors.
Graphics glitching still happening though. Could Apple have been wrong about my GPU?
Here's a video of the glitching: https://www.dropbox.com/s/g3t6h0au4cw6g03/LogicGraphicsArtifacts3.mov?dl=0

Run the Apple Hardware test and see if it flags the graphics card.
"com.apple.GeForce(4.5.6)@0x8ed000
dependency: com.apple.iokit.IOPCIFamily(2.2)@0x5c3000
dependency: com.apple.iokit.IOGraphicsFamily(1.4.7)@0x6c7000
dependency: com.apple.iokit.IONDRVSupport(1.4.7)@0x6e2000
dependency: com.apple.NVDAResman(4.5.6)@0x6f1000"
That entry from your log certainly indicates that there is some sort of issue with the card. If it is the card you can take it in for service and have the technician diagnose the unit to confirm it is the card and then have it replaced.

Shattered glass strange graphical glitch

I've been having this strange thing happen every once in a while on my imac. Sometimes when randomly when you move the mouse the screen changes to look like multicolored slivers. the only way I can describe it is as multicolored "shattered glass". As you move the mouse it changes colors and such. The only work around I've discovered so far is to open dashboard several times and it disappears. Any help is appreciated.

I get the same issue...typically this happens if I connect my laptop through a VGA cable. I've tried everything from changing my video card settings(resolution, refresh rate, etc...) but I get the same exact graphical glitch. Any luck on figuring this out?
Also, do you ever get thin lines that roll/move up the screen? I would get those occasionally and it had something to do with the digital switching inside the laptop power supply(the laptop power supply was on the same outlet) and was causing this problem so moving it to another power outlet or circuit breaker helped, but I still get the graphical glitch you have.

Graphical glitch

When I look at itunes, sometimes the items have a graphical glitch. Sort of doubling themselves, and just straight out looking wrong. When I take a screenshot, the screenshot has no glitches, but the actual screen does. Heres a picture I took of the screen with my iphone.
I'm not sure if theres anything else I should include, so I'll include this.
Itunes Version 12.1.0.50
MacBook Pro (Retina, 15-inch, Late 2013)
OS X Yosemite Version 10.10.2
Processor 2.6 GHz Intel Core i7
Graphics: Intel Iris Pro and NVIDIA GeForce GT 750M

See.

[Solved] Catalyst graphical glitches with dual head setup

Hello all, having a weird issue with my dual monitor setup where graphical glitches make my primary monitor completely unusable. The Tear Free feature of the proprietary catalyst driver is what seems to be causing it:
Tear Free enabled:
Tear Free disabled:
I can safely enable it with one monitor disabled also. The issue is that without Tear Free enabled, I'm experiencing some serious screen tearing when watching videos and playing games.
My video card is the XFX HD 7970 Double D and I'm using the latest version of catalyst (14.4), installed from Vi0L0's repo. The monitors are the same model with the same specs (1920x1200 @60Hz). I definitely used to be able to use Tear Free with my dual head setup at most a month ago, so some update at some point must have broken it. I temporarily switched back to the open source driver before I had found Tear Free to be the culprit and the performance is still hardly comparable.
Any ideas? Thanks in advance.
Last edited by bheinks (2014-05-15 02:38:45)

Rexilion wrote:Maybe try looking at /var/log/pacman.log and see if you can downgrade packages (start with the kernel). See if that works around the problem.
Downgrading catalyst to 14.3 seems to have done the job. Thanks for the suggestion, marking as solved.
Inxsible wrote:bheinks, you have been on the forums long enough to be aware of the forum rules. Make use of an image hosting site.
Sorry, I don't post often and wasn't aware of the rules on images. I'll keep that in mind next time.

IMac (24" Aluminium, Mid 2008) Freezing and Graphical Glitches

Hi all,
I'm having to write this on my MacBook as my iMac developed serious problems yesterday evening. Nothing new has been installed recently, and I was just listening to music on iTunes when I noticed that my iMac seemed to have frozen, although music was still playing. After the song finished it switched to the next track, but I could not control anything. The screen developed graphical glitches in the form of a lot of speckles. All I could do was hold in the button on the back and turn it off.
I've tried turning it on a few times today and the problem still persists. I've tried resetting the PRAM but that hasn't fixed it. Myself and my housemate seem to think it's a graphics card issue (NVidia GeForce 8800GS), but the problem doesn't occur when booted in Safe Mode and also doesn't occur when in Windows XP under boot camp. My iMac is running Snow Leopard 10.6.8, and I have no idea why this has suddenly happened. I swear this has happened once before, but I think the PRAM reset was what I did back then and it worked.
A few weeks ago I upgraded the iMac from 2GB RAM to 4GB RAM but it's been absolutly fine until now. Could a RAM issue be to blame for this, and could it take so long to suddenly emerge?
Thanks in advance for and help or insight anyone could offer. I know there are a lot of posts about this but I know some symptoms are slightly different so I wanted this post to be specific to my case.

+I guess the big question is whether the iMac dvi port is output and input.+
Output only on that model iMac. You'd best borrow a real monitor for initial configuration of the Mini. Once it is configured and you've turned on Screen Sharing, you can access the Mini remotely from the iMac.

Graphic Glitch - MacBook Pro, 15-inch, mid 2010

Hey everyone,
I have a MBP 15" mid 2010
Processor 2.4 GHz Intel Core i5
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce GT 330M 256 MB
HDD1 OCZ-VERTEX2 SSD 120GB
HHD2 (replacing optical drive) Seagate Momentus 2.5 inch XT ST95005620AS 500GB
I have a graphical glitch quite often, which consists of some on screen corruption that lasts for a few milliseconds - enough for me to see it, but rarely enough for me to actually take a screenshot of it. Last week I managed to finally take a screenshot of it, which is great, as I can finally show that I'm not crazy. Please see below.
I pretty much assume it will be a problem with the NVIDIA GeForce GT 330M (which is usually in use all the time, since I use an external screen in addition to my mbp 15" one).
Now, because this is not a crash event I doubt there'll be any log about it (but I'm all ears).
Regarding it's consistency and frequency it's very hard to say... it does happen a lot throughout the day. I have tried not running programmes that I feel interact with graphics a lot (F.lux and gfxCardStatus) but to no avail.
Anyone has any experience with this or some advice for me?
Thanks!

Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
Kernel Extensions in backtrace (with dependencies):
                 com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f93c70000->0xffffff7f93ed8fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f938ba000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f93c60000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f93c1d000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f93ee3000->0xffffff7f9418cfff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f93c70000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f938ba000
         com.apple.GeForceTesla(8.2.4)[B6C71E9A-E304-354B-80AD-C69C9032D367]@0xffffff7f9 4bd4000->0xffffff7f94c9efff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f938ba000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f93c60000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f93c1d000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f93c70000
         com.apple.driver.AppleMuxControl(3.4.35)[1BFF66C1-65E4-3BB3-9DEE-B61C3137019B]@ 0xffffff7f955d9000->0xffffff7f955ebfff
            dependency: com.apple.driver.AppleGraphicsControl(3.4.35)[09897896-ACBD-36B5-B1D4-0CCC4000E 3B3]@0xffffff7f955d1000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f93b27000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f938ba000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f93c1d000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f955d4000
Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. The unfortunate thing is that many people have passed the “three years from date of purchase” now and Apple is not honoring the free logic board replacement for many users. Some dealers seem to be making some exceptions for those past the three year mark, but don’t count on it…
Good luck,
Clinton

I'm having a graphics glitch in Yosemite.

Similar Messages

Maybe you are looking for