I'm having a hard time with my sound blaster z sound card to sync with cs6. Can anyone share with me

I'm having a hard time with Adobe CS6 synching up with my soundcard. Latency settings and other applications are challenging at this time. I had 3.0, but my Windows 7 computer is now "deceased". Please help.

I endorse everything that Steve just said but to try and get you going while you're shopping for an audio interface more suitable for sound work than use as a doorstop, try the following:
Go to the Windows sound control panel and make sure the SB card is selected as the default on both the Recording and Playback tabs. On the advanced menu for both, set the bit depth and sample rate to either 16/44,100 (CD) or 16/48,000 (Video) depending what suits you best. Note that your SB card only works natively at 16/48,000 so anything else involves a conversion that the card hides from you.
Go to the Windows Control panel and, under the sound section, turn off all system sounds (since they can hijack your sound card). Close every other application that may want to use the sound card (internet for example).
In Audition, go to Edit/Preferences/Audio Hardware. Set the device class to MME. On the drop down menus set the Default Input and Default Output to be your Soundblaster. On the Master Clock set it for the SB Output (this'll likely be default). Set the latency at around 200ms (you may need to increase this later if your playback stutters--or you can try decreasing it until you get stutter, then take it back up a bit. Set the sample rate to whatever you selected on the Windows Sound Control Panel.
The Soundblaster will likely have installed it's own control menu. Go to this and select Mic or Line as appropriate for the input and whatever you need for the output. I can't be more specific as SB keep changing what they call things.
Hopefully this'll get you going even if it's not the best compromise for quality and latency.

Similar Messages

I am having a hard time with fcpx, it is running so slow. i upgraded my ram to 12 and have cleaned up my computer to run faster and have changed all my files to proxy files but it is still running SO slow. please help!

I am having a hard time with my fcp x running so slow. i can't even move my mouse without the time wheel coming on and staying up for at least 20 some seconds. I have upgraded my ram to 12 and changed all my files to proxy files; also i cleaned the crap out of my computer removing all other media files I didn't need and it is still running the same. Please help! I have a deadline on my short film to be submitted and I can't finish it like this. Oh also it ran fine in the beginning but and one day it just started doing this out of no where. Anything will help! Thanks

In addition have you got FileVault switched on as that will kill performance.

Why do i keep getting these mackeeper and holds everything having a hard time with mack when on line

I am new with MAC and recently when on line i am having a hard time with links , it either don't work the link, or my search goes slow and then i get this mackeeper message holds everything. Help

Check the links below for options to remove the Adware.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071

Having a hard time with permissions to create dir and files in www

Having a hard time getting permissions to create directories and files in www folder:
I followed the following guide here: https://www.digitalocean.com/community/ … arch-linux and here: https://www.digitalocean.com/community/ … arch-linux
So now I have a LEMP stack which runs fine and I have my root account secured and a new username "adriano". If I SFTP into the server using the username adriano, I am unable to create any files or directories. Trying to do a simple wordpress install doesn't work because I need to be able to create a folder for it, and a wp-config.php file. Both of which, like I mentioned, I do not have permissions to do. Yes, the username "adriano" has been added to the sudoers file via visudo.
I've never been very good at UNIX permissions so I was wondering if maybe someone can help me out?
Also, since I am using nginx it does not seem like I have a www-data group or user and my www folder is /usr/share/nginx/
Thank you,
AJ

No, no, you guys misunderstand me. I am not that much of an oblivious person. 95% of the time I understand EXACTLY what the code that I am copying and pasting does. And when I don't, I look into it further before executing said commands. I just tend to not remember commands so I google them, see examples, and then copy and paste them to avoid the busy work of typing out long strings. For example, it took me like 6 months to remember that to untar a .tar.gz file it was -xvfz.
But I digress. drcouzelis, I do have root access. It's my own VPS. However, I have always used shared hosting through different hosting providers and now that I got a VPS and have to do everything myself, I am a little bit lost.
I followed what wonderwoofy said and created a www-data group, added the adriano user to said group, and changed the owner of my http server root to www-data, and I SFTPed into the server again with filezilla and it still works perfectly. However, those "hordes of hackers" drcouzelis warned me about does not sound pleasant so I am really really really hoping one of you guys can tell me the next steps. Root login is disabled in the /etc/ssh/sshd_config file, and I also changed the port to a random port I created. My web files are all served from /usr/share/nginx/ (there are different folders in there that correspond to different domains.) Now what I am wondering is that if user "adriano" is in the sudoers file as ALL=(ALL) ALL, doesn't that pretty make adriano the same as the root user? The reason why I am so worried about this is because I heard/read countless times that working through the root user is BADDDDDDDDDD and will bring evil and shame upon your life (not in those exact words) and that you should never work with it. Also, do I have to worry about anything dealing with groups and/or users and/or permissions when it comes to PHP? I have php-fpm installed.
I am willing to buy anyone who can help me out with this a beer or two and I will be forever in your debt.
Thank you,
AJ
Last edited by AJCR (2013-05-23 02:52:03)

Having a hard time with burning photos onto a CD...

Whew! I just found the photos I thought I had deleted this morning, they're in my Finder, inside the iPhoto Library. Now I'm having a hard time trying to burn them onto a CD. The size is 232 MB and my MacBook is OSX Lepard. Would you tell me how to do it step by step? I'm not good at this stuff. Thank you in advance for your help.

It is simple......
http://www.ehow.com/how_6225993_burn-photos-cd-mac.html

I want to take my debit card information off of my itunes account i have a iphone 4 and i m having a hard time with this??

I want to take my debit card information off of my itunes account i have a iphone 4 im having a hard time?? does anyone know how to put none for the billing information

http://support.apple.com/kb/ht2534

I am having a hard time browsing apps. Everything seems to be sub-categorized but I can't browse by sub-category like I can on my phone.

I am having a hard time browsing the app store on my iPad. I just got it and I can't figure out how to browse for example adventure games. On my android phone I can go into the app store, click on games, I can look at a list of subcategories such as arcade or board games. They are then sorted by release date or popularity. I can't seem to do that with the iPad app store. Hopefully someone can shed some light on how to do this.
Thanks :)

You can choose a Category.

Still having a hard time with "search" driven new support site.

I am still having a very hard time using this new support site. It is extremely confusing. Confusing is frustrating.
I've looked at the Tutorials and User Tips. While the User Tips have often been helpful, overall I feel like the Tutorials especially is like getting a 5 page pamphlet on how to fly a jet plane. Top level overview. Not detailed enough.
It shouldn't be so difficult - it's overly complicated to use this new site. It should be intuitive. It's not.
My biggest issue is that this forum seems to REQUIRE a user to KNOW a priori what the user is looking for so that a SEARCH can be done. It seems to have no "browse" friendly features such as categories. And it's missing those ambient indicators such as the partially filled light blue dots on the old forum that showed in a nano second what threads were new, had updated posts, or were already read.
The new site seems geared to take one down a rabbit hole with SEARCH too because it's constantly suggesting very OLD content that's not relevant.
If you don't SEARCH and use just the right terms and know exactly how to set up some sidebar, toolbar, RSS feed, bookmark, email notice, etc etc etc. it's almost impossible to find things on purpose or accident or to know when a thread is updated.
On the old forums, when I would post a question for myself I made a point to browse for threads where I might be able to help someone else. I have no idea how I could do that now.
I now dread having to use the forums. I can't seem to help myself by finding existing answers in prior posts, help myself by keeping up with my own posts (since I can't tell what's new/updated) and I can't help others.
It would be great if some kind of organization and structure could be put in place to help make this support site browse friendly.

Hi, Gordon: I would guess we have a few hundred at the most. I have only entered about 20. Most of the entries are retail stores we sell wholesale to, and contractors we sell at contractor prices, but we also have a retail trade of customers and that is going to increase a lot when we open our new show room in a few months.
My main concern is design and sales to the contractors and public, but I frequently get calls from stores asking about our inventory stock, shipments, etc. I'm new to this so I am just learning.

Having a hard time with Spry Image & CS5 on GoDaddy

Please excuse the newbie here. I hope I can give you all the info up front.
I downloaded and installed the Spry Image Slideshow with Filmstrip widget just fine into DreamWeaver CS5. I then changed Donald Booth's page to show images from my hobby of 12 images, deleting what I didn't need after that. I created thumbnails, directed everything to where it needs to go (so I thought) and saved it all. I then used FileZilla to upload to my GoDaddy site at www.cargobay13.com the file cafnew2.html and the Spry folder. The actual page is at www.cargobay13.com/cafnew2.html . So, the image file works great on my PC (a windows xp pro unit), but when I try to look at it on the internet (in google Chromer, IE8 and Firefox), it gives me a bunch of messages like "SpryPanelSelector.js requires SpryWidget.js!", etc. Then, the webpage displays all 12 images in a column, one on top of the other. I have uploaded the Spry-UI-1.7 folder into the root directory, and for good measure I copied all the individual files into the directory, too. So, what do I do now?
Here is the code for the page. After reading about hard lining the java to the wrong folder, I added the "http://www.cargobay13.com/" to the script src lines:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Brisco County, Jr.</title>
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/SpryDOMUtils.js" type="text/javascript"></script>
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/SpryDOMEffects.js" type="text/javascript"></script>
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/SpryWidget.js" type="text/javascript"></script>
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/SpryPanelSelector.js" type="text/javascript"></script>
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/SpryPanelSet.js" type="text/javascript"></script>
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/SpryFadingPanels.js" type="text/javascript"></script>
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/SprySliderPanels.js" type="text/javascript"></script>
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/SpryFilmStrip.js" type="text/javascript"></script>
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/SpryImageLoader.js" type="text/javascript"></script>
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/SpryImageSlideShow.js" type="text/javascript"></script>
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/plugins/ImageSlideShow/SpryThumbnailFilmStr ipPlugin.js" type="text/javascript"></script>
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/plugins/ImageSlideShow/SpryTitleSliderPlugi n.js" type="text/javascript"></script>
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/plugins/ImageSlideShow/SpryPanAndZoomPlugin .js" type="text/javascript"></script>
<link href="http://www.cargobay13.com/Spry-UI-1.7/css/ImageSlideShow/basicFS/basic_fs.css" rel="stylesheet" type="text/css" />
<style type="text/css">
/* BeginOAWidget_Instance_2141543: #ImageSlideShow */
#ImageSlideShow {
width: 684px;
margin: 24px 0px 0px 0px;
border: solid 1px #000000;
background-color: #717c96;
padding-top: 10px;
#ImageSlideShow .ISSName {
top: -24px;
font-family: Arial, Helvetica, sans-serif;
font-weight: normal;
font-size: 18px;
text-transform: none;
color: #000000;
#ImageSlideShow .ISSSlideTitle {
top: -18px;
font-family: Arial, Helvetica, sans-serif;
font-weight: bold;
font-size: 12px;
overflow: hidden;
color: #000000;
text-transform: none;
#ImageSlideShow .ISSClip {
height: 432px;
margin: 0 10px 10px 10px;
border: solid 1px #ffffff;
background-color: #000000;
#ImageSlideShow .ISSControls {
top: 11px;
height: 432px;
#ImageSlideShow .FilmStrip {
height: 80px;
background-color: #2a3a5b;
#ImageSlideShow .FilmStripPreviousButton, #ImageSlideShow .FilmStripNextButton {
width: 25px;
height: 80px;
#ImageSlideShow .FilmStripTrack {
height: 80px;
#ImageSlideShow .FilmStripContainer {
height: 80px;
#ImageSlideShow .FilmStripPanel {
height: 80px;
padding-left: 10px;
margin-right: 0px;
#ImageSlideShow .FilmStripPanel .ISSSlideLink {
margin-top: 10px;
border: solid 1px #2a3a5b;
background-color: #2a3a5b;
#ImageSlideShow .FilmStripPanel .ISSSlideLinkRight {
border: solid 1px #404f6b;
width: 56px;
height: 47px;
margin: 4px 4px 4px 4px;
#ImageSlideShow .FilmStripCurrentPanel .ISSSlideLink {
background-color: #59647d;
border-color: #59647d;
#ImageSlideShow .FilmStripCurrentPanel .ISSSlideLinkRight {
border-color: #404f6b;
/* EndOAWidget_Instance_2141543 */
</style>
<script type="text/xml">

</script>
</head>
<body>
<ul id="ImageSlideShow" title="Brisco County, Jr.">
<li><a href="http://www.cargobay13.com/images/caf001-001.jpg" title="Reference"><img src="http://www.cargobay13.com/images/caf-tn/tn-caf001-001.jpg" alt="Reference" /></a></li>
<li><a href="http://www.cargobay13.com/images/caf001-002.jpg" title="Reference"><img src="http://www.cargobay13.com/images/caf-tn/tn-caf001-002.jpg" alt="Reference" /></a></li>
<li><a href="http://www.cargobay13.com/images/caf001-002.jpg" title="In progress"><img src="http://www.cargobay13.com/images/caf-tn/tn-caf001-003.jpg" alt="In progress" /></a></li>
<li><a href="http://www.cargobay13.com/images/caf001-004.jpg" title="In progress"><img src="http://www.cargobay13.com/images/caf-tn/tn-caf001-004.jpg" alt="In progress" /></a></li>
<li><a href="http://www.cargobay13.com/images/caf001-005.jpg" title="Completed figure"><img src="http://www.cargobay13.com/images/caf-tn/tn-caf001-005.jpg" alt="Completed figure" /></a></li>
<li><a href="http://www.cargobay13.com/images/caf001-006.jpg" title="Completed figure"><img src="http://www.cargobay13.com/images/caf-tn/tn-caf001-006.jpg" alt="Completed figure" /></a></li>
<li><a href="http://www.cargobay13.com/images/caf001-007.jpg" title="Figure on card"><img src="http://www.cargobay13.com/images/caf-tn/tn-caf001-007.jpg" alt="Figure on card" /></a></li>
<li><a href="http://www.cargobay13.com/images/caf001-008.jpg" title="Front and back"><img src="http://www.cargobay13.com/images/caf-tn/tn-caf001-008.jpg" alt="Front and back" /></a></li>
<li><a href="http://www.cargobay13.com/images/caf001-009.jpg" title="Miscellaneous"><img src="http://www.cargobay13.com/images/caf-tn/tn-caf001-009.jpg" alt="Miscellaneous" /></a></li>
<li><a href="http://www.cargobay13.com/images/caf001-010.jpg" title="Miscellaneous"><img src="http://www.cargobay13.com/images/caf-tn/tn-caf001-010.jpg" alt="Miscellaneous" /></a></li>
<li><a href="http://www.cargobay13.com/images/caf001-011.jpg" title="Autograph"><img src="http://www.cargobay13.com/images/caf-tn/tn-caf001-011.jpg" alt="Autograph" /></a></li>
<li><a href="http://www.cargobay13.com/images/caf001-012.jpg" title="Actor with figure"><img src="http://www.cargobay13.com/images/caf-tn/tn-caf001-012.jpg" alt="Actor with figure" /></a></li>
</ul>
<script type="text/javascript">
// BeginOAWidget_Instance_2141543: #ImageSlideShow
var ImageSlideShow = new Spry.Widget.ImageSlideShow("#ImageSlideShow", {
widgetID: "ImageSlideShow",
widgetClass: "BasicSlideShowFS",
injectionType: "replace",
autoPlay: true,
displayInterval: 8000,
transitionDuration: 2000,
componentOrder: ["name", "title", "view", "controls", "links"],
sliceMap: { BasicSlideShowFS: "3slice", ISSSlideLink: "3slice" },
plugIns: [ Spry.Widget.ImageSlideShow.ThumbnailFilmStripPlugin, Spry.Widget.ImageSlideShow.TitleSliderPlugin, Spry.Widget.ImageSlideShow.PanAndZoomPlugin ],
TFSP: { pageIncrement: 8, wraparound: true }
// EndOAWidget_Instance_2141543
</script>
</body>
</html>

Hey Gramps,
I had one question. When you changed the:
<script src="http://www.cargobay13.com/Spry-UI-1.7/includes/SpryWidget.js" type="text/javascript"></script>
TO
<script src="http://www.pleysier.com.au/Spry-UI-1.7/includes/SpryWidget.js" type="text/javascript"></script>
I see that you swapped the cargobay13.com --to--> pleysier.com.au ... Does it need to be changed to pleysier.com.au specifically? or is it a diffirent directory in the server?
Im having the Same issue, In Dreamweaver CS5 and in Previw Mode is fine, untill i upload the to my server I receive the [SpryXXXXXX requires SpryXXXXXXX].
Please Help, Thank You.

[SOLVED] Having a hard time with XMonad

Sup guys,
first post ever in this Forum, but I've already used it a few times...
I'm from Brazil, and I chose Arch Linux to be my initial dive into the Linux world, I assumed this one is one of the best for me to learn about computing. I've already installed and reinstalled it a few times. I tried with KDE and stuff, but now I wanted to step up to a higher level, so I picked XMonad.
I followed several different guides to install it and stuff, I checked some solved problems trying to get it running, but no, it's still not working.
When installing XMonad 0.11 it warned me there were pendencies I had to install, some haskell packages and stuff, I got them all installed and it's now listed in GHC-PKG as xmonad-0.11 and xmonad-contrib-0.11. I got Xorg-server, xorg-xinit and xorg-server-utils all installed. I was going to use SliM Login Manager, but I found myself having trouble to start xmonad even with startx, so I'm focusing in configuring it first. I put into my ~/.xinitrc file the lines: "xsetroot -cursor_name left_ptr", "setxkbmap -model abnt2 -model br -layout abnt2" and "exec xmonad", then run "# xmonad --recompile". Finally, when I run startx what happens is that my screen goes black and theres a mouse pointer, that's it, all those XMonad keyboard shortcuts doesn't work, I've tested it with the default template in "/usr/share/xmonad-0.11/man/xmonad.hs" and other downloaded from users in this forum. Nothing ever changes, except from the default template, which gives me error messages referring to 'help' not in Scope, which I believe it's a known bug/error in the file.
I really want to use, try, learn about XMonad, but first I gotta successfully run it at least once, so I can change and see the results while making my own .hs ...
So I'm here asking for a light, all mighty archie wizards.
PS: Using Firefox from default startx Window X
Last edited by Xinube (2013-04-20 19:18:45)

Ok, so I ran startx with "exec xmonad" with this xmonad.hs config:
import XMonad
main = do
xmonad $ defaultConfig
{ terminal = "urxvt"
, modMask = mod4Mask
, borderWidth = 3
Supposely it had to open terminal with WinL + Return or WinL+Shift+Return. But it's not...
EDIT: OH DUDE! I changed urxvt for xterm and it opened! I'm so glad with almost nothing, now I'm gonna check for more keybinds and that wiki a little further... thanks
EDIT2: If I open XMonad and then open xmonad.hs and make some changes, will it automatically update? or do I have to recompile > restart?
Last edited by Xinube (2013-04-20 19:51:06)

Having a hard time with Smoothcam

I got shake last week and I am still learnign it but really like it. I have included a photo at this link to help better explaine my problem.
http://s111.photobucket.com/albums/n159/larswik/?action=view&current=Shakewindow .jpg&refPage=&imgAnch=imgAnch1
Long story short: I imported 2 clips into Shake. 1 clip is a handheld camera shot of a piece of metal laying in the sand. The second is a still image that was created in Cinema 4D of a ladder going down. I used rotoshape to create a mask so we could see the stairs going down.
On the still node with the stairs I added grain and extra nodes to help match the video.
The problem that I am having is that I wanted to Smoothcam the footage and I thought if I connect the 2 clips using an OVER node and then under that use a Smoothcam Node thinking that it would also track the still image of the stairs. But the video slides ever so slightly over the Still of the stairs and looks fake.
How can I track the still image to the video clip and smoothcam the video clip?
Here is what I am going for to better help show you what I am doing.
http://s111.photobucket.com/albums/n159/larswik/?action=view&current=stairs.jpg& refPage=&imgAnch=imgAnch1
Thanks,
-Lars

Inconceivable,
it is the first one and second one. My first thought was to smooth out the video shot of the sand to match the still of the stairs in Cinema 4D. that is what I was trying and that is what I posted here. But I can’t get the shot smooth enough so I decided to just try an track the stairs to the motion of the video.
Patrick,
I had to rethink the approach. Your right Smoothcam is not the right approach. I went with MatchMove and that worked for the most part. I was able to track the hand held footage and the stairs locked right to it.
I could only see the results when I switched to over view in the output type of the match move node. I then tried to use a 4 point mask using the Rotoshape to cut a hole through the hatch door to see the stairs under.
I know what I want to do Track a mask to the 4 points on the door from the sand video clip and then use that same track information for the stairs under so it all stays locked. It’s just getting the right tree components and doing it in the right order.
Here is a shot just to the cinema 4D stairs to give you a better idea.
http://s111.photobucket.com/albums/n159/larswik/?action=view&current=Hatchtunnel render.jpg&refPage=&imgAnch=imgAnch1
Thanks again for all the help.
-Lars

Having a hard time with FF XIII and wine

Hi there! I'm trying to run Final Fantasy XIII on wine. I installed it through Steam. I've seen this page, but my problems don't seem to be addressed there and I don't know what to do.
When I run the game from steam, I get no feedback whatsoever. The process is running according to ps, but nothing launches, no sound appears, etc.
I tried setting my resolution to 720p, which did not change anything. I also tried running FFXIII manually from the Steam install. Running the launcher gives me the launcher window, but it closes and the process exits when I hit "Play". Running FFXIII directly does not have any effect.
Last edited by SirCmpwn (2014-11-09 04:33:09)

Lone_Wolf wrote:
That page is for the retail PC version , not the steam version.
Have you tried to follow this page : https://wiki.archlinux.org/index.php/Steam/Wine ?
I installed Steam with the instructions on that page, yes. It's just FFXIII that doesn't work, other games are fine. There's no winehq page for the steam version, so the retail version is the next best thing.
nstgc wrote:Are you launching steam from from a terminal? If so is there any output that might look odd such as a segmentation fault?
Output, nothing interesting
Last edited by SirCmpwn (2014-11-09 15:47:19)

Having a hard time with group by

Ok here is my table structure:
$query = 'CREATE TABLE '.$this->table_name.' ( ';
$query .= 'id number(10) NOT NULL,';
$query .= 'user_id number(6) NOT NULL,';
$query .= 'module_name varchar2(36) NOT NULL,';
$query .= 'link varchar2(150) NOT NULL,';
$query .= 'link_summary varchar2(96) NOT NULL,';
$query .= 'date_modified date NOT NULL,';
$query .= 'PRIMARY KEY (id) )';
What I am using this table for is to keep track of the last 10 links a user visits. I then display a navigation for them ect... Now what I am trying to do also is setup a who's online. Obviously each user will have a max of 10 rows. I want to return the latest row with all information. The problem I am running into is that "GROUP BY" has to group every column you query correct? Well then every row will be unique as they go to different pages in the nav. Here is a few queries I have tried with no avail so I am sorta lost. Never tried what I am doing LOL.
SELECT users.first_name || ' ' || users.last_name AS full_name, lgg_whos_online.* FROM lgg_whos_online LEFT JOIN users ON lgg_whos_online.user_id = users.id WHERE user_id IN(SELECT DISTINCT user_id FROM lgg_whos_online GROUP BY user_id) ORDER BY lgg_whos_online.id DESC
//Returns all rows obviously
SELECT DISTINCT user_id, users.first_name || ' ' || users.last_name AS full_name, lgg_whos_online.* FROM lgg_whos_online LEFT JOIN users ON lgg_whos_online.user_id = users.id GROUP BY user_id ORDER BY lgg_whos_online.id DESC
//Warning: ociexecute(): OCIStmtExecute: ORA-00979: not a GROUP BY (I think this is you have to group all columns?)
SELECT MAX(lgg_whos_online.date_modified) AS last_seen, users.first_name || ' ' || users.last_name AS full_name, lgg_whos_online.* FROM lgg_whos_online LEFT JOIN users ON lgg_whos_online.user_id = users.id GROUP BY lgg_whos_online.user_id ORDER BY last_seen DESC
//Warning: ociexecute(): OCIStmtExecute: ORA-00979: not a GROUP BY (I think this is you have to group all columns?)
Example of data in my rows would be like so.
ID      USER_ID      MODULE_NAME      LINK      LINK_SUMMARY      DATE_MODIFIED
311      1      Calendar      /index.php?module=Calendar&action=calendar_day      Home      28-DEC-06
307      1      Emails      /index.php?module=Emails&action=index      Home      28-DEC-06
341      1      Home      /index.php?action=index&module=Home      Home      29-DEC-06
347      1      Publishers      /index.php?module=Publishers&action=index&view=Reports      Home      29-DEC-06

I want to return the latest row with all information.Are you saying you want the most recent row, based on the DATE_MODIFIED column, per user?
If so, using an analytic function, row_number, will probably do the trick
create table otn_test
(id number(10),user_id number(6),module_name varchar2(36),link varchar2(150), link_summary varchar2(96),
date_modified date);
insert into otn_test values
(311,1,'Calendar','/index.php?module=Calendar&action=calendar_day','Home','28-DEC-06');
nsert into otn_test values
307,1,'Emails','/index.php?module=Emails&action=index','Home','28-DEC-06');
insert into otn_test values
(341,1,'Home','/index.php?action=index&module=Home','Home','28-DEC-06');
insert into otn_test values
(347,1,'Publishers','/index.php?module=Publishers&action=index&view=Reports','Home','29-DEC-06');
SQL> select * from
2 (select id,user_id,module_name,link,link_summary,
3   row_number() over (partition by user_id order by date_modified desc) rn
4   from otn_test
5 )
6 where rn = 1;
        ID    USER_ID MODULE_NAME
LINK
LINK_SUMMARY
       347          1 Publishers
/index.php?module=Publishers&action=index&view=Reports
Home

New user and having a hard time with searches

Our company got SB1 several months ago and I've only been using it recently. I also don't think we are using it correctly. We have been assigning some customers as "showroom customer" when we think they are only buying once, or making small purchases, but if they come back days or months later with a question about their purchase or to purchase more, and they don't have their invoice, we can't find them. One sales person was putting their name in the remarks at bottom left, but you can't search that. Another was putting their name in the PO slot, but to search the name has to be exact or it isn't found. We decided yesterday that we need to enter every customer in as a business partner, is that correct, or is there some other area in the invoice where we can put their name and be able to search for it?
Also, when a customer comes in and looks at different products I make a Quote form and list the things they looked at with arbatray quanities, putting them in as "showroom customer" and their name in the lower notes area. I usually do this after they leave, unless it's an actual quote, and I do it for my own records to try to keep track of them, but with out a search ability for the customer it is useless.
I know we must be doing this all wrong.

Hi, Gordon: I would guess we have a few hundred at the most. I have only entered about 20. Most of the entries are retail stores we sell wholesale to, and contractors we sell at contractor prices, but we also have a retail trade of customers and that is going to increase a lot when we open our new show room in a few months.
My main concern is design and sales to the contractors and public, but I frequently get calls from stores asking about our inventory stock, shipments, etc. I'm new to this so I am just learning.

HT4113 My Iphone is Disabled And Im having a Hard Time with unlocking through Iyunes

Im Having Problems unlocking My I4s phone it stating Iphone is Disabled.

Do as the manual says to do and restore the iphone.

I'm having a hard time with my sound blaster z sound card to sync with cs6. Can anyone share with me

Similar Messages

Maybe you are looking for