I'm having a problem with audio in iTunes 10
Hello there,
During playback with iTunes 10.5 beta 8, i have somes artifacts.
Beacaus eit's difficult to describe, I've made a quick recording you can get there: http://cl.ly/2K270t3G2G111T2e3j33
Every tracks are perfectly played by quicktime or VLC. I really don't understand (i have no plugins, no sound enhancer enabled).
Any ideas?
Thank you :]
That is exactly what i am doing but to no avail... The first time i tried to transfer a clip to the timelin from the source monitor , only the video portion transferred. I puttered around a little and used the extract audio command from the clip menu and got the audio to transfer, however; it only works when i transfer the whole clip not a trimmed peice. I'm using AVCHD. I captured the videos to my computer using the PMB picture browser that came with my sony HDR SR12. the videos transferred fine and then the program asked me if i wanted to analyze the videos to vies them.. they came out graet! I then started to try to use my new Premiere Pro program to edit these and am having much difficulty learning this even using the Classroom in a book. I know this is probably something settings related . When I look at the audio description it shows that the audio is compressed in the 5.1 format. Could this be the problem? that it's compressed? Why is it still compressed if I extracted it? Thanks in advance for all your help. This really is quite frustrating to figure out. I've been at it for about two weeks off and on.
Similar Messages
-
Having a problem with audio in DVD Studio Pro with the finished copy
I am making a DVD of a clip I had transferred from a mini DV. All the audio was present when I transferred it. I had then turned it into an MPEG movie format (.mpg). When I play that clip there is audio. Then I compressed the file on Compressor. I selected the file format by choosing Apple > DVD > DVD: Best Quality 90 minutes > MPEG-2 6.2Mbps 2-pass (the clip was about an hour and 20min long) and compressed the clip. I then opened DVD studio pro, made a menu, and then added this new file (MPEG-2 6.2Mbps 2-pass). I burned the DVD and put it into my DVD player. The picture was great and everything worked fine except there was no audio. How do I get audio into this DVD? I have tried compressing my .mpg file into the Dolby Digital Professional 2.0 option that is under DVD: Best Quality 90 minutes, but when I try importing that into DVD studio pro it a message pops up saying "Incompatible format." It might also help mentioning that when I saw the file size on the Dolby Digital Professional 2.0 after compressing it, it said Zero kb. How would I get audio onto this DVD? I would really appreciate your help, I tried to be as detailed as I could. This DVD is for a family member and is urgent, so anyone who can help would greatly be appreciated. Thank you so much.
Message was edited by: rocco7070If you don't want to go back and recapture the tape you need to understand that MPG files need to be "DeMuxed" to extract the audio. My recommendation would be to use the free MPEG Streamclip and then select your MPG to be Demuxed into an AIFF file. That AIFF file will then need to be converted to an AC3 file, similar to what you did with the video.
-
Problem with Audio MIDI Setup using multiple accounts
I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.
Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne. -
Hello,
I'm having two problems with audio clips:
1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
What am I doing wrong?
Thanks.1. Drag the little hand on speaker icon to drag from
the Viewer...
Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
2. It means your sequence settings don't match the
properties of the source audio you're putting in it,
and you either need to change the settings in the
sequence, or render the audio.
Ah, that would explain it. Thanks! -
Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?
Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian -
Problems with Audio in iPhone 5
I Have a iPhone 5 and today beginning having problems with audio, I can't hear my calls or music, somebody have the same problem?...do you know how I can fix it?
Do you have the side switch enabled - do you see orange on the switch above the volume keys.
Make sure all your settings are turned up.
Try a restart of the phone by holding the home and power button until it reboots
If that does not work you can reset your settings by going to settings > general > reset > reset network settings and then reset all settings. -
Am having problems with audio tracks. For example: when capturing a clip where a person is talking, there would be 2 tracks of audio - one a radio mic (Track 1) and another mic (Tack 2)capturing ambient sound. I often delete the ambient track (Track 2) and am left with the the main audio from a radio mic (Track 1).
The problem is when I open up the main audio track (Track 1) and pan the audio track from -1 to 0 or even to +1! It says it has done it but the sound still comes out of the left speaker.
It is a very recent problem that I wonder may be something to do with preferences or settings.
We have had no problems with the speakers at all.
Thanks very much,
GeoffYou have your audio outputs set to 'dual mono', not 'stereo'.... go to:
Sequence>Settings> 'Audio Outputs' tab > then highlight the 'Stereo' button, then click OK...
problem solved... -
Having a problem with eBooks in my iTunes library.
As the title says, I'm having some problems with the iTunes library not reflecting what's actually on the disk.
I add the ebook and it seems to add ok. The file gets consolidated into /mymusic/books under the author correctly, but the book is missing from the library. The book is in ePub format, and seems to have the right file extension and shows up as a file of "ePub" type in windows explorer.
Any ideas? Is there a way to re-build the library or a portion of it?Hi tony paine,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iCloud: Keeping the Junk folder consistent between iCloud Mail and OS X Mail
http://support.apple.com/kb/HT4911
Cheers,
- Judy -
I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
Problem with Audio on HP Envy 6-1130sw (C6F62EA)
Hello everyone.
I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
Thanks.Hi piotrek1130sw,
From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
If neither driver works I will gladly follow up and provide any assistance I can.
Please let me know the outcome.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
I have an imac and am using iphoto. Currently I am having a problem with one particular album which shows in the main part of the window a triangle with an exclamation point. The two photos are at the bottom of the main window in the same area where the "info" "edit" "create" area is. I can see the two photos but I can not get them back into the main part of the window. I can't drag them anywhere either. I can't double click or right click on either of the two photos either. All I can do is click on either one and they get a little bigger. Before I saw the exclamation point in the main body of the window all I get is two squares with nothing in them and the entire border is made up of dashes. Can someone help me?
Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Screenshot is for iPhoto 9
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory. -
Hello sorry but im having a problem with my apple id it appears that i cant download nothing i dont know why but when im going to download something example facebook it appears de app that is charging and then desapere how can i fix that?
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
-Griff W. -
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
-
having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest versionMay you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios
Maybe you are looking for
-
Issue: Detected use of SPRequest for previously closed SPWeb object
I have a solution to create web site by a custom web template. I used ULS Viewer to monitor the sharepoint error log during the process. I see some unexpected error(Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb obj
-
Separate quires (correct word?) for printed book
Hi all, I am a bit new to this. I want to make a handmade book from an InDesign file. My question is, what workflow should I use to be able to print separate collections of 8 or 16 or 32 (or whatever) pages for folding and stitching into a book? My t
-
Hi there, I need to create a vector and for that I am using the formula node. I am doing that in C ( in which I really am a beginner) whereas in MATLAB the program some time runs some time it does not. Attached is the program, the error list says:
-
Prel refusing to play prel files
I created, edited, rendered, saved and watched 4 films in prel. But after restarting my computer it wouldn't let me watch them. An error message said prel wouldn't support that type of file (but they were prel files!) or that maybe a codec was missin
-
[LR 4.1 - Library] Minor but annoying bug with mouse cursor
Hi, There is a minor but irritating bug with the mouse cursor in the Library module. Steps to reproduce: 1. Activate the Library module. 2. Move the mouse cursor into the image area. The mouse cursor looks like a magnifying glass. 3. Move the mouse c