I'm having a problem with device capture

I'm having a problem with device capture. I connect my Sony HC-90 via firewire. I can start the capture process in Premier 4 but then all control freezes.
Any ideas?
Thanks,
Jeff

Are they custom EQ settings in iTunes on the computer?
Per:
https://discussions.apple.com/message/17383922#17383922
"Do the EQ settings from my iTunes library transfer to my iPhone when I sync it"
Yes.
" thus causing my iPhone to over process the data when I turn it's EQ on? "
No. If the EQ ison, the iPhone will use the EQ setting you assigned in iTunes. It will use only the preset EQ. If you have a custom setting or do not have an EQ setting, it will not be used and will use the setting on the iPhone.

Similar Messages

My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

I think many of us need a Defense Against the Podcasts App professor.
Have you looked at this Apple support page?
http://support.apple.com/kb/HT6190?viewlocale=en_US&locale=en_US

Problem with Video capture Device

i have a problem with FME. i am using Avermedia TV capture
device and Canon 3ccd Digital Video Camcorder ( PAL ) when i open
the FME interface the warning given for " Problem with Video
Capture Device".
i read all the topics in Flash Media Encoder Category, if
this problem occures my capture device ( i expect MPEG ) how to
solve this problem?
Thanks,

The Device Matrix is something we'll be updating in the
future as we continue to test more and more equipement. Ideally, I
would like for users such as yourselves to be able to add to it and
tell us what has worked for you as well. If anyone has any ideas
about what technology we should use to do this (e.g., this forum? a
wiki?) please let me know.
Regarding the devices not working - the main problem we see
is that the system requirements are not being met. Here is what to
check for:
- are you running on Windows XP (only supported OS right
now)?
- do you have DirectX client runtime version 9c or higher
installed?
- do you have hardware acceleration enabled?
- do you have 32bit graphics enabled?
- do you have the latest direct show drivers from the
card/device manufacturer?
Thanks,
Chris Hock
Adobe Systems Inc.

FMLE 3.0.0.4743 Problem with video capture device

log:
Tue May 05 2009 14:26:54 : Selected video input device: Beholder A/V Capture (SAA7135) [Slot 2]
Tue May 05 2009 14:26:54 : Selected audio input device: Beholder Aud Capture (SAA7135)
Tue May 05 2009 14:26:55 : Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use.
Tue May 05 2009 14:26:56 : Audio Device Error : The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control.
Flash Media Encoder 2.5 working without any errors

The second message that you are getting "The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control." is because your device does not let you change intensity of volume. This warning message is just to tell user that volume slider will remain disabled for the selecetd device. This is new addition in FMLE 3.0 and was not there in FMLE 2.5
Also for first message, please make sure that no other instance of FMLE is already running using this device. You can verify this from task manager. If any other instance of FMLE is running then please close that instance so that device gets free for new instance.

Problem with video capture device, with a virtual camera

I try to use Adobe Flash Media Live Encoder 3 with a virtual camera(DirectShow Filter) but met such a problem:
"Error connecting input preview RGB filter."
"Failed with error 80004005:SetupInputVideoPreview(pFilter, pguidCategory)"
"Failed with error ffffff97:SetupVideoPreview(pFilterSource)"
"Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use."
However, it is good to use AMCap,
what's the problem with FMLE.
Looking forward to your replies. Thx!

Did you ever figure out the problem/solution?
I am experiencing the same thing with my virtual camera filter when connecting to FME?
Shawn

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

Hi everyone,I'm having a problem with my iPhone 5 it's wifi doesn't seem to work.it started yesterday afternoon.

Hi everyone,I'm having a problem with my iPhone 5 it's wifi doesn't seem to work.it started yesterday afternoon.anyone know what happened?? I'm using 6.0.2

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't correct the problem Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

I am having a problem with my itouch error 3194 is displaying

I am having a problem with my itouch error 3194 is displaying

Hello there, spidermatt1.
The following Knowledge Base article offers up some troubleshooting recommendations for the very issue you're describing:
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Im having a problem with my mic on my ipod 5th gen it works but it douse not pick up any sound unless i talk right next to the mic. how can i fix this

im having a problem with my mic on my ipod 5th gen it works but it douse not pick up any sound unless I talk right next to the mic but it sounds low . how can i fix this

- Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I am having same problem with apple tv need 4.4 version and can not find solution this a brand new product out of box yesterday why would it not already have updated version. I am getting frustrated that I can not get this mirroring icon to work. I

I am having same problem with apple tv need 4.4 version and can not find solution this a brand new product out of box yesterday why would it not already have updated version. I am getting frustrated that I can not get this mirroring icon to work. I have tried all suggestions in this thread and nothing works. I also hooked up to laptop through iTunes with micro USB nothing!!!

The new appletv software came out 2 or 3 days ago, how would Apple get it on the device in the box in a store?
Why don't ou update the appletv software?

Problems with tethered capture and the 4.2 update

I'm having problems with tethered capture and my canon 1ds mark III since I updated to 4.2. Is anybody else having issues with tethered capture that was working fine before the update?

http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=4.2+tethering

IPad mini with retina still having wifi problems with iOS 8.0.2 - slow or none. Resetting temporarily fixes problem it very annoying. Please fix Apple! Not up to scratch.

iPad mini with retina still having wifi problems with iOS 8.0.2 - slow or none. Resetting temporarily fixes problem it very annoying. Please fix Apple! Not up to scratch.

I Have followed these steps, and tried others, such as resetting all my network settings. At best these only temporarily fix the problem - wifi still becomes slow or stops. I have other Apple devices connecting fine to my airport express. why is my iPad mini not working? Is it related to the fact it is 3G and I don't have a sim card installed? It is the current top of the range model with iOS 8.0.2. I paid over the odds for the best, and it is almost completely redundant. Apple - I'm losing faith. You need to keep the public better informed and fix this problem fast, otherwise I will leave you for good.

TS1702 I am having a problem with the Simpson tapped out app it won't connect to the server it only happens on my iPad other iPads are ok

I am having a problem with the Simpson tapped out it will not connect to the server it only occurred on my iPad not any others in my home

Hey Jerryd820,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides suggestions if you are having issues with a specific application:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
6. Reinstall the affected application
Remove the application from your device and reinstall it.
1. Touch and hold any application icon on the Home Screen until the icons start to wiggle.
2. Tap the "x" in the corner of the application you want to delete.
3. Tap Delete to remove the application and all of its data from your device.
4. Press the Home button.
5. Go to the App Store.
6. Search for the application and then download it again.
Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you will be charged for the app again. For more information regarding downloading previously purchased items, see this article.
7. If the issue is still unresolved
If you continue to experience the issue, contact the developer of the application for further assistance.
Thanks,
Matt M.

We have been having a problem with newsletters for a client. The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!

We have been having a problem with newsletters for a client.
The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!
This happened last month too. It seems to be related to length of the newsletter too. It works on every device except iPhones - so weird.

Hi, is anyone else experiencing i-phone only problems on email campaigns? not bashing Apple, just having issues where our newsletter are only having issues on iPhones

Having many problem with wifi....after installing lion......

Having many problem with wifi....after installing lion......it connect with wifi but not with Internet and at the same time iPad 2, iPhone 4 works smooth......help......I have MacBook air without thunderbolt and mac mini

I had the same problem last night. Boot into OSX and reboot the router - fine. Boot into Windows and wrong. Here were my fixes:
Firstly, I kept all the settings on my router solid. Just leave them as they are. Boot into OSX and check the Network settings and make a note of your IP address and the router's IP address.
Second, boot into Windows, then open up your wireless connection settings and navigate through to the properties where you can set the IP address.
Third: Set the IP address to your routers IP address changing the last set of digits to a value between 5 and 255 (I have 8 devices so I set the last two digits to 10.) This will keep the IP static.
Tab through the Mask settings to default those.
Then set the default gateway to your router's IP address.
Check that the Network Adapter's setting has IPv6 disabled (uncheck the box)
Finally: Set the primary DNS server to 8.8.8.8 then the secondary to 8.8.4.4 and then reboot the router.
That's what got my connection running.

I'm having a problem with device capture

Similar Messages

Maybe you are looking for