I'm having a problem with saving my videos...
So every time I take a bunch of photos, I connect my phone to the computer and manually move all my photos/videos into a certain folder.
i have a lot of videos so I'm trying to copy them off my phone and the file is showing up that the file size is 0 and the file won't open, but it plays on my phone
i must have 10 videos that are like that
how can I get them off my phone and saved on my computer?? some are only 3 minutes long but it says it's too big for an email attachment.
you can use dropbox or other alternatives, check out this page: how to transfer iPhone photos and videos?
Similar Messages
-
I recently installed Presenter 10 and the Presenter Video Express locks up my PC. I can't even end with the task manager. I must force my PC to shut down. Anyone else having a problem with Video Express?
Hm, that was my silver bullet. Other than doing an uninsall and then installing Presenter again, you may need to reach out to Adobe and see if they can identify what could be causing this.
-
Synching audio problem with MPEG-4 video in QuickTime
Hello,
I’m having a problem with MPEG-4 video file I created with TechSmith Camtasia (6.0.1).
Problem: The audio does not sync up with the video when played with Apple QuickTime 7.6 (latest build) in Windows Vista. The longer the video plays the more out of sync the audio is. Here's where it gets interesting:
When I play the file using Adobe Media Player or Adobe Flash Player (plug-in in Internet Explorer), the video and audio sync up and all is good.
Is there a problem with how Quicktime decompresses this type of file?
Does anyone have any idea what is happening?
Thanks,
LeoIf I remember well, N70 plays mp4 video without problems. Try resizing during encoding to 176 x 144 and reducing frame rate to 15 frames per second. Also try to keep data rate below 200 kb/s. If you are using MediaCoder do not go with default settings for Nokia N70, they are too optimistic.
Here is link to document titled Creating Mobile Videos
http://www.forum.nokia.com/info/sw.nokia.com/id/b0c449c1-8e67-4c60-bd50-18a2b4f1e09b/Creating_Mobile...
Hope it helps.
www.2010-solutions.co.za -
I am having a problem with ICLOUD. Help!
I am having a problem with my icloud. So here is the story. I had iphone 4. My contacts were backed. Someone stole my iphone. I got a new iphone 4s. My contacts did not sync from my previous iphone 4. so someone told me to restore to iphone 4 backup. I did. And wow! i got all my contacts back. I want all my contacts to be saved. And i don't want to lose them, it took me a while to build this list properly. With email and number and address.
Here is what i tried so far, i backed up from itunes to computer, then backup to icloud, then I did from my phone, i turned the contact switch on also, and the swtich on to back up to icloud. When I go to icloud.com. it's not there. If anyone can help me with this issue I would appreciate it. because i have a lot of contacts, and I need to save them in a way, I won't ever lose them.You would need to backup into icloud again also if you have enough room to backup. If not purchase more icloud backup or backup to itunes. Sync your contacts back to your email where they will always be.
-
Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.
More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages AdbeRdrSecUpd11008.msp -
Problem with "Saved with Id" in Reports
Hi Group,
I am having problem with "Saved with id" functionality.
1.) I created a Query in sq01 as "query1".
2.) Copied the source code of this query into a z program
ztest_query.
3.) Now executed the report "ztest_query" in background with "Saved with Id" checkbox checked and id as "1234".
4.) Now where/how can I search for this id "1234" to retrieve my list.
5.) Normally if I dont change the report name and use the program aq*query1 which is self generated one, this works and I am able to retrieve the saved list from Transaction
SQ01.
Please let me know how this can be achieved.
Regards
Ankur BhandariAnkur,
Did you find a solution for this problem. Not many seem to be using this "Save list to id" functionality.
Thanks
Vyas -
Hello,
Im having problems with saving files on my computer, from Mail and Safari. I have 900gb free diskspace, but i simply cant save anyhow, it says my disk is full.
Have i accidentally locked something up?
Regards,
NiclasRun disk utility on your hard drive to repair your permissions. http://support.apple.com/kb/HT1452
-
Problems with Saved Watermarks - Wrong Font Size
Hi,
I am having problems with "Saved" Watermarks, as when I selected them they have the wrong font size.
I created a Watermark (Draft) to be placed on the lower right
corner of a PDF, using font Arial-10. This watermark has been save using the "Save Settings..." in Watermarks.
When I add this this "saved" watermark to a new PDF, the font size is wrong
(much much bigger), even though the Add Watermark windows reports Arial-10. Only by a selecting a different font size and changing it back to the saved font size (10) I get the correct Font Size in the PDF.
I had a similar problem with the placement, but managed to solve that by setting the Preference>User&Guide to the used Unit (Page&Ruler = centimeters). But for the font size I can't find anything in the preference.
Any Help or Suggestions ?Hi,
Sorry forgot to add, I am using
Acrobat Professional 8.1.2 on Windows XP Prof.
Cheers
Johannes -
Having a problem with eBooks in my iTunes library.
As the title says, I'm having some problems with the iTunes library not reflecting what's actually on the disk.
I add the ebook and it seems to add ok. The file gets consolidated into /mymusic/books under the author correctly, but the book is missing from the library. The book is in ePub format, and seems to have the right file extension and shows up as a file of "ePub" type in windows explorer.
Any ideas? Is there a way to re-build the library or a portion of it?Hi tony paine,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iCloud: Keeping the Junk folder consistent between iCloud Mail and OS X Mail
http://support.apple.com/kb/HT4911
Cheers,
- Judy -
I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
I have an imac and am using iphoto. Currently I am having a problem with one particular album which shows in the main part of the window a triangle with an exclamation point. The two photos are at the bottom of the main window in the same area where the "info" "edit" "create" area is. I can see the two photos but I can not get them back into the main part of the window. I can't drag them anywhere either. I can't double click or right click on either of the two photos either. All I can do is click on either one and they get a little bigger. Before I saw the exclamation point in the main body of the window all I get is two squares with nothing in them and the entire border is made up of dashes. Can someone help me?
Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Screenshot is for iPhoto 9
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory. -
Hello sorry but im having a problem with my apple id it appears that i cant download nothing i dont know why but when im going to download something example facebook it appears de app that is charging and then desapere how can i fix that?
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
-Griff W. -
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
-
having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest versionMay you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios
Maybe you are looking for
-
My iPad's battery keeps dying. When I plug it in and put it back on, the screen shows a drained battery. After a few moments it boots up. However, when I check the battery charge, it's at 52% or so. Can someone tell me what's causing this? And what c
-
Up to What capacity HDD can i add to macbook pro early 2011
Hi i have a Macbook pro early 2011 and i want to uprage my HDD. Can i add a 1 TB disk? And what is the best?
-
Dear All, We have purchased 10 Diff materials with with 4% VAT Cr & At the end of month my client will decide to avail the 80% VAT for only 4 materials and 20% wants to add into the material cost. It will be decided on the base of consumption of mate
-
Hi Guys: We created an SDK Setup as we do for every Add-On using a separated solution to include, Customer Library, Setup & SDK Setup. We followed all the stesp we normally do, Change Add-On Name and Executable file, Include Customer Library Conpilat
-
I purchased photoshop and I get this message while trying to download it.... You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.