I'm having a tough time getting my Apple TV (second generation) to connect to my Sharp Aquous LC-40LE700UN HDTV.

I can get the Apple TV to output to a Samsung 24" monitor.
I can get the Apple TV to connect to my network.
I can update the software on the Apple TV.
I CANNOT get it to share iTunes from a Windows 7 computer (using the Samsung monitor) although sharing is enabled and I'm using the same ID and passsword everywhere. iTunes files are on a USB drive.
I CANNOT get it to output to any of the 4 HDMI ports on the Sharp Aquous LC-40LE700UN. That TV is 120Hz and 1080p capable. Apparently it can do all resolution below 1080p.
Ideas?

And then this:
LED SHARP AQUOS LC40LE700UN Class HDTV - 1080p, 1920x1080, 2000000:1 Dynamic, 4ms, 120Hz, 16:9, PC Input, 4x HDMI LED SHARP AQUOS LC40LE700UN
SHARP AQUOS LED LC40LE700UN
Formato de Video: 1080p (HDTV)
Entrada: Audio - 1/8" Mini (3.5mm),
Component Video,
Composite Video,
Front/Side HDMI,
Front/Side RCA Composite,
HDMI,
S-Video,
VGA
HDTV Integrado: Yes
Salida: Audio - Digital Optical
Tipo de Pantalla: LCD w/ LED Backlight
Relación Aspecto: 16:9
Resolución: 1920 x 1080
Energy Star: Yes
Brillo: 450 cd/m2
Frecuencia Refresco: 120 Hz
Medida de Pantalla: 40
Display Panel
Brillo: 450 cd/m2
Reinicio a Máxima Resolución: 120 Hz
Response Time: 4 ms
Contraste: 2,000,000:1
Resolución: 1920 x 1080
Diagonal Screen Size: 46 in
Tamaño Visible: 45.98 in
Ancho/Alto: 16:9
Tipo de Pantalla: LCD w/ LED Backlight
Broadcast Standards
HDTV Built-in Tuner: Yes
Broadcast Format Supported: 1080i (HDTV),
1080p (HDTV),
720p (HDTV)
Broadcast Format Displayed: 1080p (HDTV)
Interface
Salida: Audio - Digital Optical
Entrada: Audio - 1/8" Mini (3.5mm),
Component Video,
Composite Video,
Front/Side HDMI,
Front/Side RCA Composite,
HDMI,
S-Video,
VGA
Conectores: Ethernet - RJ45,
Serial,
USB - Universal Serial Bus
Other Features
Energy Star Compliant: Yes
Características Generales: Dejudder Technology,
Digital Media Playback
PRECIO PAGO AL CONTADO : u$s 1987
http://www.novedaddigital.com.ar »

Similar Messages

HT204406 I authorized a second computer on my iTunes account, and downloaded my library from the Cloud to my new computer. However, many songs only partially downloaded, and now I'm having a hard time getting rid of them to do full downloads.

I authorized a second computer on my iTunes account and tried to get my first computer's library on my second computer via the Cloud. Many of the songs only partially downloaded, and I am having a hard time getting rid of the library with the partial downloads (so I can get full songs). I am considering nuking the current iTunes on the second computer and re-installing, giving myself a clean slate to work with. Is this the right way to go?

How to use your iPod to move your music to a new computer

TS2621 having a hard time getting my email account started. Keeps coming up with an error notice.

Having a hard time getting my e-mail started on my iPhone 4. Trying to get connected to Verizon.

Having a hard time getting my e-mail started on my iPhone 4. Trying to get connected to Verizon.

Help i have an iphone 5s and whenever i dowload an app or update, the symbol turns to install then the circle loading, then all of a sudden it goes back to the price symbol. I am having a tough time can anyone help me.

Help i have an iphone 5s and whenever i dowload an app or update, the symbol turns to install then the circle loading, then all of a sudden it goes back to the price symbol. I am having a tough time can anyone help me.
________________________________________________________________________________ _____________________________________________________ Also all my wifi apps dont connect to the internet except for safari and maybe appstore HELP??!!!!!
Both these problems are happening at the same time so i dont know if they are linked or something but please someone help

Hello shahnaztech
They probably could be related. Start with the articles below to troubleshoot issues with Wi-Fi as well as making sure that the router is using the recommended settings.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Regards,
-Norm G.

TS3048 I'm having a difficult time getting my wireless keyboard & trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, won't connect to iMac. Pleas

I'm having a difficult time getting my wireless keyboard & trackpad to work w/my iMac. I just changed the batteries on both devises but for some reason, after turning on and seeing the green light flash on both devises, both won't connect to iMac. Please help...

Hello:
Try resetting the SMC:
http://support.apple.com/kb/HT3964
Barry

I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip. Yes, I know I can add them up myself, but why? :-)

I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips. Yes, I know I can add them up myself, but why? :-)
I am using imovie 10.0.6

For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
Geoff

Having a tough time with Prelude and Playhead movement.

I'm having a tough time grasping how navigation in the Prelude Timeline works, and will try to keep my questions short and separate, rather than a long list.
1) I've added markers to a clip. When clicking-on/selecting a marker that I've added, it appears in the HUD, but the Playhead automatically moves to where I click. That may place it anywhere between the In and Out points for that marker, when what I might want to happen is to select/highlight a marker, then move the Playhead to the Out point, (perhaps in order to move the Out point a few frames). There must be something about the Playhead behavior that I'm missing.
2) How can one Play only the part of a clip that has markers? Example: I have multiple markers, but I want to Play only the footage between the In point of Sub Clip 1 and the Out point of Sub Clip 1.
Is there a way to do that?
The difficulty in doing this seems to be compounded by the situation described in Question 1 above, i.e. when I select/highlight a Sub Clip, the Playhead moves to where I click.
I've tried various key combinations in the Timeline and the Marker Inspector, but no joy.
Is there a way to select and Play only a Sub Clip from its' In point to its' Out point?
Using Production Studio Premium CS6 on Windows 7 Pro, and Prelude Help>Check for Updates tells me everything is current.

Thanks for your reply.
Clicking on either the In/Out point to drag either one, they move as shown in your example.
I don't know how to record video from my screen to show the behavior, but when I do what you do in the first 2 seconds of your video, i.e. click in the middle of the colored marker bar, the CTI moves to where I click,
I notice that you already have a marker highlighted, then you click from an area without markers to the center of the first marker, then the center of the 2nd marker, then the center of the 3rd marker, all without the CTI moving.
When I do those same steps, the CTI moves to where I click. It appears you're using only Comment Markers. (I can't read the Marker text to know for sure). However, I''ve also tried it with Sub Clip markers, and a combination of Comment and Sub Clip markers, and the CTI still moves to where I click.
I've looked in Edit/Preferences, but nothing there seems associated to the behavior I'm experiencing.
Is there some other setting I'm overlooking? Maybe something "connected" to how the HUD affect CTI movement?
Thanks.
PS: Does/would it matter that I'm using/working with AVCHD footage, i.e. MTS files?

How do i get my ipod nano second generation to be rcognised on the latest itunes update? i have tried differnt cables and usb slots.

hey, i have an ipod nano second generation (i know its old but i want to use it) on the old itunes before the latest update i could sync and change things on my ipod, i downloaded the latest software on my windows computer and now can not get itunes to find my device, i have tried different usb cables, different usb slots and have tried re-starting my computer. no matter what i try i can not get it to come up on itunes.
Has anyone else had this issue? can anyone give some advice? thanks

Hello joejoehoppy,
Look for it to pop up next to the iTunes Store icon. Also check out the article below to troubleshoot your iPod nano connecting to iTunes.
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How do I get my Apple TV (2nd Generation) to load my library?

I have tried everything to get my Apple TV to load my library. Even talking to two Techs on the phone. They were unable to help me get the problem fixed. I thought it was just one of my Apple TV devices that quit working, but have discovered that both have quit working. There has to be an answer. Has anyone fixed this problem?

The following article(s) may help you.
Setting Up Home Sharing On A Computer
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

Having a hard time getting iMac (Alum) to start up

I had to force restart my imac because it ended up freezing in Front Row. When it restarted it didn't pick up that my Time Maching Hard Drive was connected, so later in the day I restarted again and it will usually pick it up and when I restarted it my iMac wouldn't boot up. The apple symbol came up with the cirle that rotates, but it did nothing past that and I gave it 5 mins becuase it has never taken longer than that. I then tried it again, but it still wouldn't boot. I decided to leave it off and unplugged for the night.
I tried it the next day and still had a hard time. I would unplug everything and hold the power button down (was told by a customer service rep to do this with an earlier problem) and the I plug everything back in and try again, but nothing. I then would hold down the power button until I hear the long tone and then it would restart and I finally got it to boot up, but this doesnt' work every time. Once it rebooted, my dock was back to its original state and my hot spots were turned off. I also wanted to to access my accounts and I had it locked and when I press the unlock icon, not thing happens, which is not usual.
Everytime I restart my computer I get the white screen, so I have to shut it off and try again. Sometimes it takes me 5 or more times of trying different things to get it to boot up. Do you have any suggestions?

Welcome to Apple Discussions:
I don't think Front Row has anything to do with it. It sounds like a HD going bad, or some other hardware - logic board, etc.
Can you safe boot? Hold down shift key on boot and at login screen select restart. See if system then reboots normally.
Boot into your Leopard DVD and repair HD and permissions.
If you have DiskWarrior, use it.

HT1212 So my phone is locked and I'm having a tough time.

So i changed my password to go in my phone. But after a while i forgot it and i disabled my phone for a long time(2 days). So i went online to help me with this problem and it said this.
If you have previously synced your device with iTunes, you may be able to reset the passcode by restoring the device:
Connect the device to the computer with which you normally sync and open iTunes.
Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
If the device is still disabled, or if iTunes does not automatically sync your device, sync the device with iTunes.
If you have chosen to encrypt your backup, it will contain the passcode. Disable backup encryption before restoring from backup. Learn more about iOS backups in iTunes.
When the backup and sync is complete, select Restore from Backup and choose the most recent backup of your device.
If you have never synced your device with iTunes, or you do not have access to a computer
So i tried but i cant do it. I have an iMac and i cant do it and it tough for me. Can you pease help me?

Only your carrier can unlock a phone, if they even allow that. The two major carriers in the US, for example, do not unlock iphones under any circumstances. If not in the US, visit your carrier (or call them up) to find out what their policy is.

I attend everest college, I had to download foxfire , it is the site supported by everest college. I am having a hard time getting on line. We are now on brake and I have not been able to check in for grades

when i use foxfire to do college work. I have to keep trying for several hours to get in. I had a hard time finishing my finals, cause I could not get in, I was taken a test and computer went out. took most of my test time left to sign back in. When I signed bck in I had 6 minutes to finish. We are on break this week. Classes start back on april 18. Help!!!!

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Im having a hard time getting AE to run even though I know it should

Hey guys, Ive been starting to try and get into using after effects. I have put lots of stuff together in premiere pro and want to add some effects but i can hardly get it to even playback the file in the preview window, won't even scrub through hardly.
Premiere pro cs6 runs smooth and renders out iin good time.
My system specs are:
I have changed a few settings while playing around as per some pages I found on here about ram allocation and CPU stuff heres thos settings.
Im kind of at a loss with what else to do... Any thought are appreciated, I have a ssd on the way but Im not sure It will make all that much of a difference
Thanks
Elliott

"...i can hardly get it to even playback the file in the preview window, won't even scrub through hardly. Premiere pro cs6 runs smooth and renders out iin good time."
I hope you don't expect AE to work like Premiere. It doesn't.
There's nothing wrong with your machine or with your software that's immediately apparent, either.
Premiere does one thing, AE does something else. They don't work the same. You don't use them the same way. AE is a totally different application than Premiere, and just like Premiere, you have to begin at the beginning if you want to learn it. People who try to use AE intuitively end up failing about 90% of the time.
So here's a good place to start.
I STRONGLY recommend you use it and you don't blow it off. If you do, you're only hurting yourself. Seriously.
I don't care how good you think you are, you'll miss some important detail vital to using AE, and your work will come to a grinding halt.

I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working! I am having a hard time getting it started again, need help!

I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working!
How could this have happened and what can I do to get it running again?

Didnt realize there was a response, late getting back to you.
Save your process files outside of the NI progam directory (you should have external backups already right ). THey should not be deleted.
Any customizations to the lookout.ini and lookout.sec file may be lost.
Mike
Forshock - Consult.Develop.Solve.

Do you have to have i cloud to down load your home music library im having a tough time with it

I HAVE ANI PAD 2 ANDI CANT GET MY MUSIC INTO I TUNES. I SYNC IT FROM WMP AND IT WENT MY MUSIC FILE BUT IT WONT PLAY OR GOT I TUNES. CAN SOMEONE HELP

With ATT, you can pay month by month. They have a $15 (256 mb) and a $25 (2gb) per month fee. You can activate and deactivate this service directly from you iPad. Have fun!

I'm having a tough time getting my Apple TV (second generation) to connect to my Sharp Aquous LC-40LE700UN HDTV.

Similar Messages

Maybe you are looking for