I'm having an intermittent (yet increasingly frequent) problem. For whatever reason, I'm experiencing windows default system "beeps" while using Firefox. I have isolated this problem to Firefox, as it goes away when I'm not using it. Any thoughts?

This problem *seems* to occur after using some java based products on Facebook.com but I haven't isolated it to just facebook, as I do have 6 tabs open on Firefox start-up.

Hi. Thanks for the quick reply. Yes, it just started recently and after not being able to fix the problem, I completely reformatted my computer and started with a fresh slate, but still having the same problems. The videos will not continue to load. They get less than half way and then just totally stop loading, therefore I only get to view the video up to the point where it stops loading. I just took your advice and I disconnected the router and connected my computer directly to the modem and my sound issues were fixed. I went into the voice chat and had sound for over 10 minutes (and then I disconnected) instead of the usual 5 seconds that it'd been. So is it the linksys that is causing this? If so, how can I fix it? Thank-you. Message Edited by nightrider7000 on 01-22-2008 11:34 AM
Message Edited by nightrider7000 on 01-22-2008 12:44 PM

Similar Messages

  • Keyboard not going away when I'm not typing

    My keyboard stopped disappearing when I'm doing things like looking at photos or scrolling through text messages. Suggestions?

    Try resetting your phone by pressing the lock button and home button at the same time till the apple logo appears. That normally fixes most bugs

  • When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.

    When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.
    Thank you for your help!

    Download/install an app is a know possible solution.
    3. Install another app from the App Store
    If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
    Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
    Above from Apple's :
    iOS: Troubleshooting applications purchased from the App Store

  • When I select an option from the help drop down menu it just goes away. It does not go to the help option I chose.

    When I select an option from from the help drop down menu it just goes away. It does not go to the query I selected by hitting the keypad.

    Jody
    you don't tell us Device or OS?
    Quoted from  Apple's "How to write a good question"
       To help other members answer your question, give as many details as you can.
    Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
    Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
    Describe the problem, and include any details about what seems to cause it.
    List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
    ÇÇÇ

  • My screen dims intermittently to almost completely dark, it goes away when I press the top button but, it is annoying.  what is wrong?

    My screen dims intermittently to almost completely dark, it goes away when I press the top button but, it is annoying.  what is wrong?

    Try the standard trouble-shooting steps: Restart, Reset, Restore. If these don't solve the issue then you may have a hardware probem. If so, contact Apple Support.
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"
    Restore: Use iTunes on your computer to Restore your iPhone to as new.

  • HT2479 iMovie stays on desktop but does not want to open up so I can use it, any thoughts??

    iMovie stays on desktop but does not want to open up so I can use it, any thoughts??

    Hi,
    I had this problem. Solution was to move mouse over taskbar icon. When Firefox displays small icon right click this and select maximise window !!! I think somehow Firefox got minimised to the taskbar and would not reopen as a full window. i.e it when you clicked the taskbar icon it would pop up and then pop back down to the taskbar again !!
    Hope this helps.

  • Flash player won't work or download. It says it no longer supports power pcs. I am running 10.5.8 on my ibook G4. Seem to have tried everything. i.e. chrome, firebird, archived flash players, etc. All not supported. Any insight???

    Flash player won't work or download. It says it no longer supports power pcs. I am running 10.5.8 on my ibook G4. Seem to have tried everything. i.e. chrome, firebird, archived flash players, etc. All not supported. Any insight??? It started when I tried to upgrade current flash player and it said I needed to uninstall current version, which I did, and then it wouldn't download the current one giving me the not supported story! Please help!!!!!!

    Hi Andy, that is correct, they don't support PPC Macs anymore.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
    Download this if you haven't...
    http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp10.1.102.6 4_and_9.0.289.0archive.zip
    Once downloaded if it doesn't unzip automatically the double click on that file.
    Look for the fp10.1.102.64_and_9.0.289.0archive folder, open it, look for the Flash Player 10.1.102.64 folder & open and look for 101r10264 folder & open it, double click on the flashplayer101r102_64_ubmac.dmg file, choose the Install Adobe Flash Player file to install... they don't make it easy!
    Or smaller here...
    http://dl.dropbox.com/u/450421/flashplayer10_1r82_76_ub_mac%20copy.dmg.zip
    Stand alone player...
    http://dl.dropbox.com/u/450421/LastFlashPPC.zip
    Or free 3rd party...
    http://www.wimpyplayer.com/products/wimpy_standalone_flv_player.html

  • HD noise when flat, goes away when tilted back now wont boot

    hey guys... i've been reading some of the discussions about HD noises and sounds. it seems like everyones HDs make noise or slow down when tilted. I HAVE THE COMPLETE OPPOSITE PROBLEM. i apologize for the long post:
    12" Powerbook [purchased 05/04 and well taken care of]
    mac OSX 10.3.9
    original toshiba HD 60GB
    its kind of weird. i was running ichat, iphoto, safari, photoshop, and iflash [flashcards] all at the same time when i noticed a significant slow down in performance which stalled all programs. i then head a loud whiring humming buzz that sometimes turned into grinding. of course this freaked me out. i tilted my powerbook backward to give it a listen and then the noise went away. not only that all the programs completed all previous requests faster than ive ever seen them perform before. well i repeated this to see if the effect was reproducable, and it was.
    well the next morning i turned it on and my powerbook was working fine. no noises or indications impending failure. well i had to leave the library so i shut my powerbook off but the filevault program wanted to recover unused HD space so i let it do its thing. when i tried to power on my powerbook it got to the grey screen with thespinning gear and wont get past that point.
    figuring that it was an HD problem, i got my buddy's ibook, set my powerbook into firewire mode by booting and pressing "T", and connected them. i was able to recover data off of my non admin accounts using Migration Assistant but my main admin account wont let me even touch its files due to the filevault settings. i found away to at least get to my files in the main acct by mounting its .ars [i think thats wht it was] image i found under my non main admin account user folder. the thing that gets me is that i can easily access my HD in firewire mode, but the powerbook itself wont get past that grey apple screen. it makes unusual noises and then stops and stays stuck on that screen with the spining gear going.
    now this is a major headache since im a med student and i need my powerbook to access my flashcards, notes, and online resources. ive come to realize how dependant ive been on this machine. can anyone help me? is it my HD thats the problem? is it a filevault thing? do i just need to reformat? why do i get that sound when the PB is flat but it goes away when its tilted? now im kicking myself in the butt for not getting applecare.
    thanks guys,
    Edward
    MS2 Ross University School of Medicine
    evilmcnasty.blogspot.com

    Edward:
    Last week, my PB started making the same noise that you've described, which is opposite of the other posts, ie buzzing when flat, quiet when tilted. I ran disk utility, TechTool Deluxe (that came with AppleCare), etc without finding anything wrong. Yesterday, I noticed that my s.m.a.r.t status shows my hard drive to be failing (in red letters). My understanding is that it will fail eventually, even though I am using the computer without incident right now. Suffice it to say, I have backed everything up and am waiting for the inevitable moment. I plan to call AppleCare today (sorry to hear you don't have it) to enquire about what I should do. In particular, I cannot go without a computer right now, this malfunction being at the least opportune moment. Can anyone say if AppleCare will give me a loaner until my PB is healthy again?
    I realize that this post is of little use to your situation, but I just wanted others to know that the "opposite buzzing sound" exists and that it seems to indicate an eventual failure if mine is the typical result of the first buzzing symptoms.
    Good luck with yours.
    Ernie

  • My iPod 5 will not sync ANY music. All my music was on prior to syncing. The sync deleted all my music. I can now no longer add any music. I have the "sync music" checked. Restoring factory settings did not work. Any thoughts?

    All my music was on prior to syncing. The sync deleted all my music. I can now no longer add any music. I have the "sync music" checked. Restoring factory settings did not work. Any thoughts?

    When you synced with iTunes It would have tried to replace the music on the iPhone with what is on the computer. which is what happens when you sync with iTunes.
    If the songs are purchased you can re-downloaded them Pretty easily. You mentioned that you still see the songs and that you could not play them. Do they have a Cloud symbol next to them? If so this means that you can download them but that they are not on the device.

  • Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV.  I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on.  I'm able to mirror from my Ipad but not my Mac, any thoughts?

    Welcome to the Apple Support Communities
    AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
    You have two possibilities:
    1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
    2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
    Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

  • My firefox updated this morning. Since the update I can no longer post to facebook. Any thoughts? Other browsers work. I am using Windows 7 and Firefox 10.0.1

    My firefox updated this morning. Since the update I can no longer post to facebook. Any thoughts? Other browsers work. I am using Windows 7 and Firefox 10.0.1. All was working fine yesterday.

    BTW, I can read everything just fine, but when enter information to post and press the post button, nothing happens. I have another computer running Win XP and firefox 8.x and all is fine.

  • 21 September, 2014: MD513AE/A  iPad Wi-Fi-16GB White - Model A 1458 I have purchase this from Dubai, UAE, some 2 years back. ---- I am NOT able to switch it on; when connected to power supply, the battery icon comes in but no signs of charging.

    21 September, 2014, from India.
    MD513AE/A  iPad Wi-Fi-16GB White - Model A 1458
    I have purchase this from Dubai, UAE, some 2 years back.
    I am NOT able to switch it on; when connected to power supply, the battery icon comes in but no signs of charging.
    After some times the ‘Apple’ icon comes in. Tried simultaneous operation of Sleep and Power buttons, but of no use.
    Sometimes a picture of cable and ITunes comes in; but not able to connect to
    P C as there is no battery charge.

    Hi madhu254,
    Thank you for visiting Apple Support Communities.
    If your iPhone is not charging, please check out this article.
    iPhone and iPod touch: Charging the battery
    There's a Resolving issues section, but you may want to read it all.
    Best regards,
    Nubz

  • I have an optical mouse that came with my Mac Pro plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

    I have an optical mouse that came with my Mac Pro, the only thing plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?

    Well
    I tried all of the suggestions, sort of. I did not have alcohol wipes, but I did take alcohol and pour some ona white paper towel and then rolled the mouse touch ball aroound and that finally cleared up the problem.  Just inverting it on paper did not do the reick, it needed some help with the alcohol.  Of course the probelm is the debris that gets inside and it really needs to come out.
    This is a huge problem for RIM devices users too.

  • I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed. The serial # for 13 does not work. Any thoughts on how I can get a number for PSE 12?

    I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed 12.
    The serial # for 13 does not work. Any thoughts on how I can get a serial number for PSE 12?

    Hi
    There is a newer version of Resolution+ Plug-in released for an Qosmio X series
    [Resolution+ Plug-in v 1.1.2004|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7506&sel ShortMod=null&language=13&selOS=all&selType=400&ye arupload=&monthupload=&dayupload=&useDate=null&mod e=allMachines&search=&action=search&macId=&country =all&selectedLanguage=13&type=400&page=1&ID=82406& OSID=30&driverLanguage=42]
    try it out...
    If it has not been installed properly, try rebooting your computer and reverify.

  • My question is what if I have troubleshooted with holding the sleep/awake button and power and it's not changing to any other screen what should I do? It doesn't even show the battery strength wheither its completely dead or charging at all.

    My question is what if I have troubleshooted with holding the sleep/awake button and power and it's not changing to any other screen what should I do? It doesn't even show the battery strength wheither its completely dead or charging at all.

    - If you did not charge the iPod for a couple of hours before you did the reset then charege and reset:
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then connect to your computer and if iTunes sees the iPod restore via iTunes. 
    - Next see if recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode:
    iPhone and iPod touch: Unable to update or restore
    - Last, make an appointment at the Genius Bar of an Apple store.

Maybe you are looking for

  • Is there a good way to "debug" a QuickTime

    The subject of my question is a little misleading, but I couldn't think of a better way to phrase it. Until recently, I've done all my work in ProRes 422 (not HQ) using 8-bit rendering. Naturally, I expect that all my finished QuickTimes coming out o

  • How do I download video from my Sony Handycam recorder to my macbook pro ?

    How do I download video from my Sony Handcam Video Recorder (DCR-SX44) to my macbook pro, using imovie? Seems like it was meant to work with a PC (lots of info and a CD for PC use...instructions to contact Apple for macs!)  I've saved video to both t

  • How to save home WiFi Password in N8?

    I can connect to my home network with no problems but I have to enter the password each time I connect also when I have been inactive for a while it logs off and I need to input the password again. Is there a way for the phone to remember the passwor

  • How to start with LACP on two SG 200-50?

    Hi, I've two SG 200-50 and I need to use LACP? What should I do? Adrian

  • Need Rework flow for following manufacturing Process

    Hello Experts, i am New to PP in one Production process, we are having 7stages. at the end of the 7th stage. we are getting finish product. and at the end of the Each stage, we are doing Quality Inspection. but at the end of the 4th stage, we are hav