I'm having drops in the Circuit Emulation

Hello,
I'm having some drops in the circuit emulation between BTS and BSC connection. Did a ping from the BTS router to the BSC router and there is no packet loss ou high delay. Could someone help? I'm finding that the drops are being caused by jitter, there is a link with DWDM transmission in the middle. Perhaps the DWDM is not configured correctly.
ping X.X.X.X size 1600 df-bit
Type escape sequence to abort.
Sending 5, 1600-byte ICMP Echos to 10.209.82.34, timeout is 2 seconds:
Packet sent with the DF bit set
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/8 ms
show cem platform
CEM0/0:0 errors:
Last cleared 1w5d
CEM0/1:0 errors:
num_output_pkt_drop =========== 48135/228333357
MissingPkts ================= 3480
Jitter_buffer_Underruns ===== 37009
MisOrderDropped ============= 113
Jitter_buffer_Overruns ====== 7533
Last cleared 2d15h

Contact the developer for support.

Similar Messages

We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had t

We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had to go outside to get reception without dropped calls. I was told that because of metal in my home I would have to purchase a Network Extender for $250. And we HAVE not metal in our home. AND our other lines all work fine. I felt this was ridiculous. We already pay $350+/month for service and I should NOT have to purchase additional equipment for a service that I already pay for. The manager of our local store at the time gave us at no cost a Samsung Network Extender. It worked beautifully until about a month ago. I went to our local Verizon store and was told that I would have to purchase an extender. THIS is RIDICULOUS. We have been loyal customers for over 7 years and have been very satisfied with our service. Unless this issue can be resolved without purchasing an extender we will be switching our service as our lines come up for renewal. I regret this as we have been very happy with our service. But we should NOT have to purchase anything extra for one line that will not get good reception. Again, we pay $350+/ month for a service that does not work properly, simply RIDICULOUS! Currently the "sys" light flashes red (slow) and the GPS light remains red. Please help this very frustrated customer.

Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection. You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly. Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine. You can purchase the router at 3gstore
http://i45.tinypic.com/6zc674.jpg

Hi i want to take a sequence from one timeline and drop it in another timelien without having to reedit the sequence. how do i do this thanks

hi i want to take a sequence from one timeline and drop it in another timelien without having to reedit the sequence. how do i do this thanks

leeg
Your new thread was a success.
Our original discussions on transferring content from one Premiere Elements project to another can be found
What am I missing?
in posts 4, 5, 6, and 7 of the above link.
Good choice in deciding to go with the export from project 1 into project 2.
Thanks again for your follow up and good work.
ATR

Hi All. My iPad 4 just started having issues with the volume. On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.

Hi All,
I tried to search through the community, but with the sheer volume of posts, I didn't find anything that seemed like the same issue.
My iPad 4 just started having issues with the volume. On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.
I haven't tried wired ear phones, but I am sure they'll be the same way.
It's very random, but consistent enough to happen several times per day.
Thanks for any help that anyone can provide.
I have restarted it and also did a Hard Reboot and it didn't help.
Thanks Again,
Scott P.

Well there you go, when you advertise it just be sure to say that you can't even see the scratches at half brightness and see how it goes.
Of course you are saying you want $500 for one with many scratches on the screen, has been dropped, but the scratches aren't visible at half brightness, and has no warranty. Or I can buy a refurbished iPad 4 WiFi 32 GB directly from Apple with no scratches and a one year warranty for $499. http://store.apple.com/us/product/FD514LL/A/refurbished-ipad-with-retina-display -wi-fi-32gb-white-4th-generation
Why would I buy yours?
I wouldn't pay more than $300 for a used model with your specs in perfect condition. But yours is far from perfect. I think your high point is $250 which is why I said 50%.

I am having problems using Firefox with Ebay in the last 10 days. The advanced search link is dropping off the page and there is no way to access it now.

I have been using Firefox and Ebay for at least 12 years with no problems whatsoever. But in the last 10 days I have been having trouble with the Advanced Search link disappearing from the page on Ebay. If I do a search from the Ebay home page it will show the results, but the Advanced Search link (in blue letters) which always used to appear to the right of the Search button is gone. If I click Search again at this point I can see the Advanced Search link appear for a millisecond, but then disappear just as quickly. Also, if I refresh the page the same thing happens. I tried to duplicate this problem with Internment Explorer and it didn't occur, so it appears to be Firefox that is causing this issue. Of course when I contacted Ebay they told me my problem was that I wasn't using Internment Explorer! I love Firefox and do not want to switch!

You can try to clear the cache and cookies to see if that makes a difference:
<h3>Clearing Cache</h3>
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and uncheck everything else.
#Now click the ''Clear now'' button.
<h3>Clearing Cookies</h3>
#Go to Firefox > Tools > Privacy > Remove Individual Cookies
#Find the site (ebay.com) that's having problems and clear all cookies.
#Restart Firefox
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.

I am having trouble keeping the quality of my video when exporting to my external drive. I change the kind to "original" but when I view the video from the external drive once exported, the sound and picture are distorted.

I am having trouble keeping the quality of my video when exporting to my external hard drive. I have tried to export from iphoto with changing kind to "original" but when I open the video from the external drive the quality is effected. I have also tried copying the video to my desktop and then dragging and dropping onto the drive...same problem. Any suggestions? I would like to save everything to my external drive so that I can delete all of iphoto library and then reimport to correct a few things.

The file sizes are identical. In the finder I did a search for all .mov files. Then when they came up, I went through them and named each one so that they would be easier to find. I am a new mac user and am used to windows. I realized later that I should not have done this....with a mac files should be named within iphoto app...not finder....When I went to open the videos in iphoto, it wouldn't allow me. I had to go into finder, copy to desktop and reimport into iphoto. Then the videos worked again. However, I had the problem with the poor video quality when copied to external drive before that. Actually the first problem I had was when I copied to ext drive...videos were copying as an image...so I learned that you have to change "kind" to original before exporting....then that problem was solved...now they are videos, not images but not of a great quality. Skips, sound and images are not in sync...etc...

How to install the Binaryfile in to the iphone Emulator.

how to get the binary file into the iPhone simulator without having to actually build and deploy in our environment. Is it possible to run the Binary app in iphone simulator. Please guide me. Thanks in advance.
Regards,
Arun.
Message was edited by: cursedbuddy

These discussion forums can only deal with getting an app onto a real device through the iTunes Store and iTunes application.
If you are developing an app and referring to the iPhone emulator you need to discuss this at https://developer.apple.com/devforums/.

How to quit the J2ME emulator when running from a batch?

I am launching the J2me emulator from a batch file in order to run unit tests (J2meUnit). I am using "emulator.exe -classpath ... -Xdevice:mediaControlSkin -Xdomain@trusted com.mydomain.TestMyMidlet".
This works fine, and some of the tests even pass (;-)) but after the last one the emulator sits there waiting for me to shut it down, which would get a little tiresome at 4.00am every morning when the rest of the automated unit tests run ;-) How should I terminate it please? I tried to call destroyApp(true) after the last test but got "java.lang.SecurityException: Application not authorized to access the restricted API". What am I missing please? Thanks for any ideas...

You can extend j2meunit.midletui.TestRunner (which you are probably already doing),
copy-and-paste the start method from the source package, then change the end to look like this:
                              System.out.println("Exception while running test: " + e);
                         e.printStackTrace();
// start change
               finally
                         notifyDestroyed();
// end change
          }.start();
     }In other words, when all the tests are done, notify the application manager that you're all done. (destroyApp is what the app manager calls, notifyDestroyed is what you call)
On the same topic (risking modestly hijacking the thread here) I'd like to ask if anyone knows how to just run some class inside a J2ME VM without having to pop up the UI.
I know there is a j2meunit.textui.TestRunner, but I haven't figured out any way to get a command-line KVM without an UI at all. AWT throws exceptions when no X server is running (or you unset $DISPLAY). Of course, everything runs fine (except that you can't specify an exit code, which gives you some more hoops to jump through with ant), but I don't think an unit test should need an X server running / should pop up a window for half a second.

Access schema objects without having to specify the user.

I've just created a role in a schema and assigned some priveleges.Then I created a user and granted the role to it. But as the newly created user is not the owner of the schema when I say a simle select query like this:
SELECT EMLOYEENAME FROM EMPLOYEES
I get "table or view does not exist" error. Is there a way I can wirte refer to objects in this schema without having to indicate the owner. So instead of writing SCOT.EMPLOYEES I want to write just EMPLOYEES.

>
I get "table or view does not exist" error. Is there a way I can wirte refer to objects in this schema without having to indicate the owner. So instead of writing SCOT.EMPLOYEES I want to write just EMPLOYEES.
>
Create a public synonym for the object.
CREATE PUBLIC SYNONYM EMP32 FOR SCOTT.EMP;Then you do not need to specify the schema.
--- edited to add doc reference
See CREATE SYNONYM in the SQL Language doc
http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_7001.htm
>
CREATE SYNONYM Purpose
Use the CREATE SYNONYM statement to create a synonym, which is an alternative name for a table, view, sequence, operator, procedure, stored function, package, materialized view, Java class schema object, user-defined object type, or another synonym. A synonym places a dependency on its target object and becomes invalid if the target object is changed or dropped.
>
Edited by: rp0428 on Apr 5, 2012 10:56 PM

How to change the screen resolution in the Mobile Emulator

so far we tried the Mobile Emulator in the netbeans, it is alway 240*320, but many real device is WVGA(480*800)
whether does that mean the JavaFX Mobile only support the 240*320?
if not, how can I change the screen resolution of the mobile Emulator, thank you

I'd like to know how to do this, too. I tried fiddling with the "ScreenGraphics.bean" in the JavaFX\javafx-sdk1.2\emulator\toolkit-lib\devices\QwertyFxPhone directory, but without success.
If anyone knows, please just drop a quick line here!

After a few minutes, the page down won't work without clicking the mouse pointer on the page I am reading to activate page down again. Is there a way to go back to page down working every time without having to click the page first?

Question
After a few minutes, the page down won't work without clicking the mouse pointer on the page I am reading to activate page down again. Is there a way to go back to page down working every time without having to click the page first?

Today, two other users reported issues with the back-forward history list dropping down if they hovered the mouse pointer over the back or forward button -- without clicking -- and then moved the pointer downwards. One user was on a touchpad, I don't know about the other user. Are you experiencing anything like that?

HT4236 I HAVE 2 HARD DRIVES ON MY LAPTOP. MY PHOTOS ARE ON 1 HARD DRIVE & MY ITUNES IS ON ANOTHER HARD DRIVE. I AM HAVING TROUBLE SYNCING THE PHOTOS FROM THE SEPERATE HARD DRIVE ONTO MY IPOD TOUCH. ANY HELP?

I HAVE 2 HARD DRIVES ON MY LAPTOP. MY PHOTOS ARE ON 1 HARD DRIVE & MY ITUNES IS ON ANOTHER HARD DRIVE. I AM HAVING TROUBLE SYNCING THE PHOTOS FROM THE SEPERATE HARD DRIVE ONTO MY IPOD TOUCH. ANY HELP?

There is a whole lot of bad going on there.
There are problems both drive errors and USB errors. I don't believe it.
I have a hunch the drive is starving for power.
USB devices are supposed to function all the way down to 4.25V. Not all do.
USB ports are supposed to be able to deliver 4.25V at the end of the cable at 500mA. Not all do.
USB 2.0 devices are not supposed to draw more than 100mA unless they negotiate for more. Some violate that.
USB 2.0 devices are never supposed to draw more than 500mA. Some violate that. Especially disk drives.
My guess is that your drive is drawing excess current and the voltage drop through the port and cable are dropping you below 4.25; or at least below the voltage that your drive goes "Tango Uniform"[1]. Does your drive have the option for external power? If so try it. Following up on wtx's comment; USB 3.0 is capable of delivering more power. Also, some drives have used a cable that violates just about every aspect of the USB specification: A "Y" cable that plugs into two host ports to provide more power to the guest. I despise this solution with every fiber of my electrical engineering existence; never-the-less, you might try one.
edit: [1] Teats Up.
Last edited by ewaller (2015-04-04 17:02:04)

As I scroll through a file, it drops to the bottom or flies off the side of my screen. It reopens when i click the file, but why is is flying off of my screen?

I am having a new issue with my Macbook Pro.
As I scroll through to review a file the file flies off to the side or drops off the bottom of the screen.
I can reopen the file okay but scroll 3 or 4 times and it whooshes off the screen again.
This has never happened before this morning.
I wonder if it is not a symptom of a bigger problem.
I have been downloading Shutterstock files for the last few days & have 100 images in the file that is acting up.
Could it be that the file is stuffed too full?
Any help is appreciated.
Thanks,
Shannon

I'm going to assume you don't have a fancy multiple monitor desktop...
This page contains a script that positions the browser window at the upper left. If Firefox is your default browser, then copy the following:
http://dev.jeffersonscher.com/jstest.html
and paste it somewhere that you can click it, such as a Word document or an email. If you have enabled the Run command on the Start Menu (more info: [http://www.nirmaltv.com/2009/01/15/enable-run-command-in-start-menu-in-windows-7/ How to Enable Run Command in Start Menu in Windows 7]) then you can simply paste it into the Run box and click OK to launch it in the browser.
If the script method doesn't work, you can use the slow method. With the Firefox window active, press Alt+Spacebar to open the control menu, then press the right arrow once, then press the left arrow repeatedly until the window comes into view. When you can see enough of it to be able to click and drag its title bar, press Enter to complete the move operation.
Any luck?

Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
The next issue is iMessage as that's playing up and wifi drop out
Good luck

IMessages drop below the bottom of the screen

Was curious if anybody else is having an issue with iMessage. I've noticed that is I switch from landscape to vertical view, the content of the iMessages will drop below the keyboard. I'm able to drag the content up to an area I can read but the moment you let it go, it'll drop back down and out of sight.
Is this a known issue?
Ryan

I apologize for this reply being so late. Your idea was great but I am already operating at the largest dimensions. The problem got temporarily solved when I installed the latest OS update but it has now returned. As well, the follow-up from Apple gave me the option of marking your suggestion as "correct answer" or "helpful answer" and I'm sorry but I can't say either. I have no idea what to try next - other than to wait for another update to OS X 10.

I'm having drops in the Circuit Emulation

Similar Messages

Maybe you are looking for