I'm having issues loading Facebook due to time out error.

I'm on 10.8.2 and using Safari 6.0.1. I've tried everything....clearing cache, resetting Safari...and yet I'm having this issue. Also tried Chrome, Firefox and Opera as well. Sigh.
I've got no issues loading Facebook on my iPad using the same WIFI network. So I'm really puzzled.

i was having the same problem, after a trying all options that genuis bar recommeneded it still didn't work, but what worked was a DFU restore, which was actually recommeneded by a specialist at the Yorkdale apple store, i can't believe all the genuises i spoke to didn't recommend that the first time around after all else had failed... but DFU restore worked for me...
good luck and hope it helped.
Shout out to the Yorkdale (Toronto) Apple store specialists!

Similar Messages

MacAir- Wifii "connected" no loading or "time out" errors

I have a MacAir and all of the sudden the Wifii wouldn't connect to the wifii server at school.
Other students were having no issues. It would say "time out" error.
Then it would connect to the guest network and full bars would show but wont load any pages.
My ipad is able to connect normally. Therefore it must be my OS on the MacAir.
If followed other support threads and reset the network but still having the same issue
I really need to get this fixed if possible, any help would be appreciated. Thank you~

Hi aimomo!
I have a few articles here for you that will help you troubleshoot this issue with your Wi-Fi connection:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load
http://support.apple.com/kb/ts2296
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
http://support.apple.com/kb/ts3408
Safari 6 (OS X Mountain Lion): If Safari can’t open a website
http://support.apple.com/kb/PH11883
A few of these articles are for specific circumstances related to loading pages in Safari, but I thought they may be helpful if it seems like your issue is similar to what is described in the articles. Thanks for being a part of the Apple Support Communities!
Regards,
Braden

I'm having issues loading Youtube on my MacBook Pro for about a week now. I'm not sure if this is because of my computer or internet but my sister's PC loads Youtube completely fine. Can someone help me figure this out?

I'm having issues loading Youtube on my MacBook Pro for about a week now. I'm not sure if this is because of my computer or internet but my sister's PC loads Youtube completely fine. Can someone help me figure this out?

Hi, I had been having the same problem for over a week, but both my window's HP and my 2011 macbook pro barely could load youtube. What kind of router you have? I was using a belkin play router that was only 8 months old, switched to a new AirPort Extreme Base Station and now everything works perfect.

I am having issues loading CR2 into my LightRoom, I am currently running Lightroom 4.4, Camera Raw 7.4

I am having issues loading CR2 into my LightRoom, I am currently running Lightroom 4.4, Camera Raw 7.4

What camera model took the pictures? It is a question of when your camera was added for support. Check the following list and find your model. That will tell you what is required to work with your files.
Camera Raw plug-in | Supported cameras

HT4972 Is anyone having issues with facebook on iphone 3?

Is anyone having issues with Facebook and iphone 3?

If you're using IOS 4.2.1, you can not download facebook. I have had the same problems and now just use safari to go on facebook. Hope this helps

I am having issues suddenly exporting files. It reads error exporting 25 files, As I attempt to choose another destination folder the folders show a black square where the folder sign previously was. I am in my busy season and this has created a huge dela

I am having issues suddenly exporting files. It reads error exporting 25 files, As I attempt to choose another destination folder the folders show a black square where the folder sign previously was. I am in my busy season and this has created a huge delay!!! HELP!!!!

oh and if you use a creative cloud version of Lightroom it could also be that the logon to the cloud is messed up. Logging out and logging back in from preferences in the creative cloud app will fix that. Due to the release of Lightroom CC it appears that adobe's servers have been overwhelmed a bit And many people have strange problems that are solved by logging out and back in.

My Mom's 2011 iMac is having issues loading web pages.

This past week my mother's iMac (2011) began having issues with the internet. She told me that whenever she ties to search for something on the internet, the reload bar in Safari constantly spins and takes forever to load (around 40 seconds).
We are using an Air Port Extreme router (2011 model), and my mom's iMac still has Snow Leopard (Mac OS X [10.6.8]) installed. The other computers in our house (a 2009 HP Touchsmart, a 2011 MacBook Pro, and a 2013 MacBook Pro) have no issue whatsoever. I recently had to restart the AirPort device in June due to issues, but it was fine for the last month up until Sunday, July 20th, 2014. The iMac is connected to the AirPort Wi-Fi network, but it's incredibly slow.
Is this problem happening because she hasn't updated her computer to OS X Mavericks?

Try rebooting the modem and router and her iMac. If that doesn't help create a new network location Using network locations (Mac OS X v10.6 and later)

I'm having issue loading a page in Safari.

I'm having an issue loading a page from a wesite in Safari. I only have this issue with this website. I can't figure this out. I have tried resetting Safari, emptying the cache, clearing the cookies, deleting the history, logging on as a guest and everything else I can think of. It worked once but now no matter what I do it won't load. I see the header and footer but all the content in the middle is gone. Any suggestions?

Hi.
Please reply with a link to the site so we can try it.
Also, Linc's advice to try another browser is not just a good idea if you have troubles accessing a site, but if Safari is giving you problems, you can use the other browser for downloading any necessary files to repair Safari.
Mozilla Firefox Web Browser

Having issues with Mounting older drive/time machine

Hey folks, I'm having issues with mounting a ex hard drive. It works, but there is a passcode for it, due to being my time machine drive, I dont remember the password, is there anything I can do to reset it? if not how do I wipe it clean? I went into disk disk Utilities and everythink looks fine.. Check out the pics Iput up

I dont remember the password, is there anything I can do to reset it?
No.
if not how do I wipe it clean?
If you can connect the drive to a computer running Windows or a version of OS X older than 10.7, erase the drive that way. Otherwise see the link below.
Hard disk bricked after using file vault with time machine

Login issue in OIM11g due to oim credsmap error

We have OIM 11gR2PS1 installed on unix box. We have AD connector 11.1.1.5.0 installed on it .Also,peoplesoft recon connector PSFT_ER-11.1.1.5.0 is installed
In our scenario,we have webservice code in which using recon event we are creating users in OIM environment
This is hosted on same OIM server unix box.Inside webservice code we have refred oimclient.jar file to work with OIM APIs and Recon Service class.
When i tested webservice for first time it was unable to load OIM API classes as it was unable to find oimclient.jar in classpath.
So to resolve this issue i kept oimclient.jar in location- "WL_HOME/server/lib/" and also added following entry in setDomainEnv.sh to load oimclient.jar explicitly in classpath
CLASSPATH="WL_HOME/server/lib/oimclient.jar:${CLASSPATH}"
export CLASSPATH
and made entry in system-jazn-data.xml present in DOMAIN_HOME//config/fmwconfig/ as :
<grant>
            <grantee>
                <codesource>
                    <url>file:${domain.home}/servers/oim_server1/stage/*</url>
                </codesource>
            </grantee>
            <permissions>
   <permission>
               <class>oracle.security.jps.service.credstore.CredentialAccessPermission</class>
                     <name>context=SYSTEM,mapName=oim,keyName=*</name>
                     <actions>read,write</actions>
    </permission>
            </permissions>
        </grant>
After this change, webservice was working as expected and OIM related things were working fine.
But,when we tried to run schedule task "Active Directory Group Lookup Recon" for AD, we are getting error message as :
java.lang.LinkageError: loader constraint violation: loader (instance of com/thortech/xl/dataobj/tcADPClassLoader) previously initiated loading for a different type with name "com/thortech/xl/dataaccess/tcDataProvider"
So,to resolve this AD schedule task issue,we rolled back changes made for webservice in setDomainEnv.sh and system-jazn-data.xml file
and removed explicit classpath entry line of oimclient.jar from setDomainEnv.sh
But after restrating all admin and managed servers,we are currently facing issue in logging into OIM idenity/syadmin or design console with xelsyadm credentials
we have never made any changes of password for xelsyadm account or not made any change in any authenticatorproviders in weblogic console
we tried everything form reverting all changes to original setup without webservice or peoplesoft listener implementation
removed all explicit classpath entries or grant entry for oim credsmap from system-jazn-data.xml.
But still same issue persists
Any helpful suggestion is appreciated on this ASAP.
issue logs are:
TaskFlow Registration: TaskFlowDeployerThread.registerTaskFlowWithTask - Error while setting task display, this can happen with app loading issue, trying to load for 2
<Nov 11, 2013 11:24:20 PM EST> <Warning> <oracle.soa.services.workflow.worklist> <BEA-000000> <<.> Error while setting task display, this can happen with app loading issue, trying to load for 2>
<Nov 11, 2013 11:24:24 PM EST> <Error> <XELLERATE.ACCOUNTMANAGEMENT> <BEA-000000> <Class/Method: tcDefaultDBEncryptionImpl/initKeyStore encounter some problems: access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=oim,keyName=.xldatabasekey" "read")
java.security.AccessControlException: access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=oim,keyName=.xldatabasekey" "read")
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:372)
at java.security.AccessController.checkPermission(AccessController.java:559)
at oracle.security.jps.util.JpsAuth$AuthorizationMechanism$3.checkPermission(JpsAuth.java:458)
at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:518)
at oracle.security.jps.util.JpsAuth.checkPermission(JpsAuth.java:544)
at oracle.security.jps.internal.credstore.util.CsfUtil.checkPermission(CsfUtil.java:643)
at oracle.security.jps.internal.credstore.ldap.LdapCredentialStore.containsCredential(LdapCredentialStore.java:214)
at oracle.iam.platform.utils.config.OIMPrivilegedExceptionAction.run(CSFCredentialProvider.java:236)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.iam.platform.utils.config.CSFCredentialProvider.getPassword(CSFCredentialProvider.java:79)
at oracle.iam.platform.utils.config.standalone.StandAloneCryptoConfig.getPassword(StandAloneCryptoConfig.java:76)
at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.initKeyStore(tcDefaultDBEncryptionImpl.java:67)
at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.getCipher(tcDefaultDBEncryptionImpl.java:96)
at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.encrypt(tcDefaultDBEncryptionImpl.java:193)
at com.thortech.xl.crypto.tcCryptoUtil.encrypt(tcCryptoUtil.java:118)
at com.thortech.xl.crypto.tcCryptoUtil.encrypt(tcCryptoUtil.java:275)
at oracle.iam.platform.auth.impl.Authenticator.encrypt(Authenticator.java:188)
at oracle.iam.platform.auth.impl.Authenticator.authenticateWithPassword(Authenticator.java:161)
at oracle.iam.platform.auth.impl.Authenticator.authenticate(Authenticator.java:134)
at oracle.iam.platform.auth.providers.wls.OIMAuthLoginModule.login(OIMAuthLoginModule.java:46)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.GeneratedMethodAccessor951.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:784)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:203)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:698)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:696)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:695)
at javax.security.auth.login.LoginContext.login(LoginContext.java:594)
at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
at sun.reflect.GeneratedMethodAccessor961.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at com.sun.proxy.$Proxy16.login(Unknown Source)
at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at com.sun.proxy.$Proxy34.authenticate(Unknown Source)
at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:338)
at weblogic.servlet.security.internal.SecurityModule.checkAuthenticate(SecurityModule.java:252)
at weblogic.servlet.security.ServletAuthentication.login(ServletAuthentication.java:466)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at oracle.idm.common.login.SignInBean.handleWeblogicAuthn(SignInBean.java:131)
at oracle.idm.common.login.SignInBean.doLogin(SignInBean.java:97)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.sun.el.parser.AstValue.invoke(AstValue.java:187)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
<Nov 11, 2013 11:24:24 PM EST> <Error> <OIM Authenticator> <BEA-000000> <Error encrypting password>
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at oracle.idm.common.login.SignInBean.handleWeblogicAuthn(SignInBean.java:131)
at oracle.idm.common.login.SignInBean.doLogin(SignInBean.java:97)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at com.sun.el.parser.AstValue.invoke(AstValue.java:187)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User xelsysadm javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User xelsysadm denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.GeneratedMethodAccessor951.invoke(Unknown Source)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at com.sun.proxy.$Proxy34.authenticate(Unknown Source)
at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:338)
at weblogic.servlet.security.internal.SecurityModule.checkAuthenticate(SecurityModule.java:252)
at weblogic.servlet.security.ServletAuthentication.login(ServletAuthentication.java:466)
... 72 more

Hi All,
I have tried out option of adding authwl.conf in java argument as mentioned. But,still same issue persists. I think it will be same whether we refer authwl.conf file from OIM_ORACLE_HOME/server/config or OIM_ORACLE_HOME/designconsole/config/ location.
We havent made any changes in USR table for xelsysadm user
Even system-jazn-data.xml is intact.
Actually,when i removed following classpath entry from setDomainEnv.sh file
CLASSPATH="WL_HOME/server/lib/oimclient.jar:${CLASSPATH}"
export CLASSPATH
Its working fine and i am not facing any login issue in OIM console.Also the Active Directory connector scheduled task are running fine without giving earlier error whic is becaus of explicit classpath addition in setDomainEnv.sh.This error was
java.lang.LinkageError: loader constraint violation: loader (instance of com/thortech/xl/dataobj/tcADPClassLoader) previously initiated loading for a different type with name "com/thortech/xl/dataaccess/tcDataProvider" .
This error was arising since i have explicitly mentioned oimclient.jar again in classpath and as OIM server also will load it at OIM server startup time. So it was finding two instance of tcDataProvider and was not able to decide to refer to which one of them.
But, I have to refer oimclient.jar in my webservice code to work.If we dont add classpath entry explicitly for oimclient.jar then it will throw error..that it is unable to load OIMClient class.
Webservice is deployed in OIM serveer . Is there any other way by which i can refer oimclient class in webservice code without causing this classpath conflict issue. ?
Also.is it correctthat for first time when we load Classpath explicitly like i did in my scenario,then it will always try to refer same classpath for that jar always.
For ex: in my env i made changes in setDomainEnv.sh and modifed classpath enrty as :
CLASSPATH="${OIM_ORACLE_HOME}/server/client/oimclient.jar:${CLASSPATH}"
export CLASSPATH
but this time it will start throwin the exception as :
<Nov 11, 2013 11:24:24 PM EST> <Error> <XELLERATE.ACCOUNTMANAGEMENT> <BEA-000000> <Class/Method: tcDefaultDBEncryptionImpl/initKeyStore encounter some problems: access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=oim,keyName=.xldatabasekey" "read")
java.security.AccessControlException: access denied ("oracle.security.jps.service.credstore.CredentialAccessPermission" "context=SYSTEM,mapName=oim,keyName=.xldatabasekey" "read")
Do i need to reinstall OIM setup to resolve this issue or is there any other way to refer oimclient.jar in my webservice code deployed in OIM env ?
Please suggest.
Thanks,
RPB

Sporadic issues with wireless connection (dhcpcd times out)

I'm using a wireless usb adaptor Dlink DWA 110 (chipset rt73). It can connect fine some times, but many times it times out on dhcpcd. Raising the time out time causes it to hold indefinitely on the message "offered 192.168.0.132 from 192.168.0.1". Analyzing the dmesg, I see
[ 118.065433] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 507.792005] wlan0: deauthenticating from 00:1e:58:16:89:8c by local choice (reason=3)
[ 507.795984] wlan0: direct probe to AP 00:1e:58:16:89:8c (try 1)
[ 507.798617] wlan0: direct probe responded
[ 507.798622] wlan0: authenticate with AP 00:1e:58:16:89:8c (try 1)
[ 507.800482] wlan0: authenticated
[ 507.800506] wlan0: associate with AP 00:1e:58:16:89:8c (try 1)
[ 507.802986] wlan0: RX AssocResp from 00:1e:58:16:89:8c (capab=0x431 status=0 aid=6)
[ 507.802991] wlan0: associated
[ 507.816784] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
I'm writing this from an ubuntu live cd, where it works just fine. Here follows my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="America/Bahia"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!usblp !ipv6)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="pedro"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
#INTERFACES=(wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(dlink)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network net-profiles cups dbus hal netfs crond alsa webmin timidity++)
I've tried googling, but no suggestion seems to work. Any help?

This is basically a workaround, but still. You can try hold_connect script to automatically watch connection status. It can be found here: https://bbs.archlinux.org/viewtopic.php?id=103139. Just add "iwconfig wlan0 power off" string in function connect under "sudo netcfg down ..." line.

Loading Large Data Set Times Out In APEX

I am trying to load a large text file using APEX 3 I am using a 1g file which has about 50,000 rows. After about 5 minutes the browser times out. Any ideas nothing in the alert log so it is not database related. Here is the error in the Apache Log
mod_plsql: Long running URL [pls/apex/wwv_flow.accept] timed out

Steve,
The Apache process is timing out. Most likely this is set to 300 in your httpd.conf (the default).
You can extend it to more than 300, but if I were in your shoes and you had the proper access, I'd use some other means to load 1GB of data (e.g., SQL*Loader).
Joel

[Solved] Having issues loading chrome/chromium/firefox

Hello all
I am new to arch, just installed last week. I installed KDE and have been using konqueror, but wish to use a chrome/firefox derivative. I've installed chrome, chromium. and firefox, but none will start up. When I start the application via the gui it shows up in the task bar, however it does not load, and exits after about 20 seconds.
I apologize for being a noob, I searched this problem on the wiki, google, and forums, but couldn't find anything.
Thanks!
Last edited by Althonse (2012-03-30 07:32:40)

Not doing -Syu leaves you with a broken system.
Using --force on a general -Syu also leaves you with a broken system.
'The mtab conflict' and other such issues are almost always discussed here on the forums, simply running your whole -Syu with --force isn't the best way of dealing with them.

Still having issues loading AS2 movies

I'm loading AS2 movies in a AS3 environment. The AS2 movies
use Tweener (any other tweening engine gives the same results btw).
If I load a AS2 movie the first time, a tween that uses a time and
easing property runs fine. When I load the AS2 movie the second
time... no go (the AS2 movie is removed... loader.unload, and the
loader is nullified, no listeners...). If I remove the time and
easing property on the tween, the 'tween' (it's now simply a new
value for x or y...) runs fine every time.
Is this some sort of cache issue? Broken GC kglad? Anyone
experienced this too or does anyone can shed some light on this?
Ideas maybe what I can try to solve this?

Have you removed the page as i get redirected to http://steamcurriculum.blogspot.in/p/home.html/whatsmissing/index.html
I do not see any edge realted content even in the source of this page

I am having issues loading older e-mail from my account.

It used to load them, but now it says loading messages/refreshing and then does not do it. HELP! I have my account set up to see messages from 1month or 100 email, there are only the last 5 showing up now!

Hi wilsonsn! Receiving email while on the go has become so important, whether it be for business or just to stay in closer touch with friends and family. I'm happy to help, and would like to start with some questions, as well as a troubleshooting step.
Is this a new issue? If so, do you notice if there was something that was done right before it started, that may have caused it (i.e., an application or any change in settings)?
To troubleshoot, I recommend uninstalling your email application, then reinstalling it. Depending on the model Droid you have, the steps can be different. Here is a link to our support page, just enter "Email" and then the model of your device. vzw.com/support
Once you remove the email, you can readd it right away, and this can bring back your emails. Please post back with your results, thanks very much!
Christina B
VZW Support
Follow us on Twitter @VZWSupport

I'm having issues loading Facebook due to time out error.

Similar Messages

Maybe you are looking for