I'm having issues with wifi still on 7.0.4

I was experiencing in and out connectivity issues when using my 4s (connecting to wifi, not connecting to wifi) and usually when I would reset the network or my phone the problem would resolve. Think of it as seeing a steady pulsing 3G then Wifi symbol where it's just not connecting.
Now on 7.0.4 I'm stilling having issues and the restart of the phone (and restore) did not seem do have any effect.
Any suggestions here? Been happening both at home, work, and connections to local places. I'm thinking it's the card in the phone that's just beat up due to typical iphone wear and tear.
THanks!
Phil

i was having the same problem, after a trying all options that genuis bar recommeneded it still didn't work, but what worked was a DFU restore, which was actually recommeneded by a specialist at the Yorkdale apple store, i can't believe all the genuises i spoke to didn't recommend that the first time around after all else had failed... but DFU restore worked for me...
good luck and hope it helped.
Shout out to the Yorkdale (Toronto) Apple store specialists!

Similar Messages

TS1398 After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise. Thank you.

After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
It works fine in LTE network. The problem is with WIFI only.
Thank you.

Hey Siddh.s!
Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Recently started having issues with WiFi

Hello everyone,
Recently I started having serious issues with Wifi. I fixed it kind of by turning off iTunes iCloud backup, but generally the signal is low. As an iOS 5 tester in the Apple Developer program, I tested it for months on my iPod without any problems. When I got my 4S, I never had a problem with it until just a few days ago.
A friend of mine said she was also having the same problem. She claimed she turned off iCloud backup as I did, turn off both WiFi on her Mac and on her phone and reboot both. I did this. Then I turned them back on. She also suggested I forget the network and re-enter the security key. That done, it connected and had a stronger signal. After a while though, it continues to drop peareoticly. I notice that it stay's connected a lot longer now. Another friend also suggested I turn off bluetooth, although that didn't really help much. What seems to fix it tempararly is iCloud backups have to go off.
The Mac is still working great. No stupid connection errors and or dropping. I'd be curious to see if I would be having this problem with my iPod Touch. Probably not.
Anyone find any deffinate solutions to this?
Thanks.

Thanks for the reply. What do you mean "2.4 GHz WiFi reliability is a hit or miss"?
Warranty is over so no problem there.
I see a lot of 7260 cards, is there one in specific I need? Example:
http://goo.gl/PKcRIU
http://goo.gl/ooaUEw
N would actually be fine, don't really need AC, recently upgraded my router and don't feel compelled to change...the price difference is small, and I'm all for future-proofing, but, I just need the thing to WORK.
Thanks again.
-kj-
T440p | Core i7 4700MQ @ 2.4 ghz | 8 GB | Samsung 840 EVO 240gb SSD | 14" | Intel HD Graphics | Windows 7 Pro 64-bit

Having issues with WiFi after upgrading to iOS 7.

After upgrading my iPhone 5 to iOS 7 I'm having WiFi issues that I didn't have with iOS 6. For example, on my home network YouTube videos hang multiple times in a 1 minute video, Facebook pages with heavy duty graphics take forever or don't load, and running Ookla speed test, all the test are slower. On every other computers in the house, download is faster than upload, except on the iPhone 5 with iOS 7. Anyone else seen this?

Do the basics first. follow http://support.apple.com/kb/TS1398. I would also clear cookies and data in settings > safari.

I updated my ipod 5 to ios 7 and now it having issues with wifi connection

I updated my ipod 5 to ios 7 and now it keeps saying my wifi password is incorrect. Ive reset my network settings and it is still not working. any ideas?

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I installed OS Lion on my late 2009 Macbook and now I am having issues with WiFi. When my computer goes to sleep my mac won't recognize my WiFi and I need to use the network assistant EVERYTIME to get on the internet.

Very frustrated as my Macbook has been freezing a lot especially when streaming video online or sometimes just by being on a website with a lot of flash. I've updated all my software and I have 4 gigs of ram. I do have most of my 250 gig hard drive used up....coud this be an issue?

Very frustrated as my Macbook has been freezing a lot especially when streaming video online or sometimes just by being on a website with a lot of flash. I've updated all my software and I have 4 gigs of ram. I do have most of my 250 gig hard drive used up....coud this be an issue?

HT201401 my iphone 3 is having issues with wifi.

my iphone 3 is not allowing me to tap the wifi button in settings and just says 'no wifi' and it's gone grey so i can't tap it. i have reset all the settings etc and it is still doing the same thing. do i need to take it in or is there something else i can do to fix it?

you are experiencing a hardware failure. You'll need to bring your phone in to Apple for replacement.

Having issues with my iphone 5 on wi-fi- does not automatically pick up wifi and doesnt remember passwords

I just picked up my iphone 5 yesterday and I am having issues with wifi.
When I tried wifi for the first time I selected my home network and entered in the password for the network and found out the following issues:
1) if you turn off wifi or turn on airplane mode or off, and then turn on wifi again - the phone does not remember the network's password and I have to re-enter it evey time plus manually select it
2) when wifi is on, not automatically detected nor does it select my network on its own have to manually go in and select a network
Help! Do I need to call Apple? Anyone else getting this?

I just managed to figure out the problem here. What you have to do is manually add the network by selecting "Other..." and filling in the information instead of selecting the item from the list of networks.

Macbook Pro Retina issues with Wifi Speeds

I have one of the new Macbook Pro 15" Retina models and have been having issues with Wifi Speeds. Apple has replaced the computer but have the same issue with the new one. When doing a side-by-side comparison with older Macbook Pros and PC's I'm seeing around a 10 megabytes per second difference. Is anyone else experiencing the same issue?

So an update on what I've found. After testing two different MBP Retna's basically hourly for 4 weeks I found a few interesting things, but ultimately resolved my issue. The first thing I found consistently between both MBP Retina's both on my network and in the Apple store on their network was the first thunderbolt port closes to the screen is slower than if you try to use the LAN cable adapter on the second port. I saw about 10 GBps between the two ports. The second thing i found was these new MBP Retina's aren't really compatible with older Apple networking technology. I have a single band Airport Express and a single band Time Capsule. Using either router they only worked on the 2.4 5Ghz setting and even with that the speeds constantly fluxuated. Most times I got between 2 - 10 GBps. After hours of troubleshooting it was recommended to update either my Time Capsule or Airport Express to one of the newer dual bands, which I did. After purchasing and setting up a new dual band Airport Express and spliting the networks to have one band constantly on the 2.4 5Ghz setting and the other set to automatic both with differing network id's this solved my problem. I now consistently see download speeds of around 35GBps and upload around 6GBps. So connecting the dots and drawing logical conclusion, these new MBP Retinas are really only compatible with newer dual band Time Capsules or Airports. Even though my single band was also set to 2.4 5Ghz, the same as the dedicated network used now on my dual band Airport Express, this MBP Retina had issues maintaining WiFi speeds.

TS1702 Is anyone else having issues with the most recent Facebook update? I updated it yesterday and now it won't open. I have uninstalled and reinstalled the app, but it still fails to open! Any suggestions?

Is anyone else having issues with the most recent Facebook app update? I updated it on my iPad 2 yesterday, now it will not open app at all. I have restarted iPad, uninstalled app and reinstalled, several times and still it will not work! Any suggestions? I have also closed the append still no results!

I just started having this yesterday. It's only happened twice, but it's annoying. My wife texted me that she was coming home last night, and it showed up immediately on my iPod Touch but not my iPhone. I opened my iPhone and it soon updated. Worked fine after that. Then just a moment ago today my wife texted me and the same thing happened. I heard my iMac and iPod Touch receive the message but it didn't display on my phone until I opened the phone and it showed up again a little bit thereafter. I suppose I'll send Apple some feedback on this issue.

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

I am still having issues with the TOC. I finally got several chapters and sections to show different pictures in the TOC, but have spent hours trying to figure out how to repeat it. This should be so simple. Is there an update? Please help us Apple.

I am still having issues with the TOC pictures. I got several chapter/section photos to show up, but can't seem to repeat this success. It is some mystery that happened during a time that I had practically given up. This should be such a simple thing. Drag and place a picture into the placeholder and it shows up in the TOC....right? Help, help help! want to get this thing done and it's taken two days of work just get some of the photos to show up. I am going to have to publish this ibook with no photos in several sections.....why can't this be simple? I have even had someone else spend hours trying to figure this out. This software is such a GREAT idea....come on...help with this little part of it.

I had the same problem myself. I got to the point where I couldn't replace the photo, of a new chapter, in the TOC. What I did was to duplicate an existing chapter that was working and was able to replace it's TOC's photo. I also found that if you try different areas of the photo you can sometimes get it to replace correctly. For example, instead of dragging the new photo to the middle of an existing photo, try dragging it to the right top corner.

Mac Pro 6,1 STILL having issues with Open CL (4K scaling and SpeedGrade direct link grades)

I've seen the staff responses to the issues of the new Mac Pro GPU saying that 10.9.4 fixes everything. For me, it has fixed my export issues, so I'm glad. I'm no longer getting lines and artifacts on my renders.
That's great.
However, I'm still having several issues, and they seem to be linked to Adobe and Open CL.
Here's a video that shows what's going on:
mac pro issues july 7 - YouTube
Issue #1
Like most of you probably, I'm doing 1080p exports of most things I'm working on. The first project shows a 1080p timeline with a mix of 4k, 5k, and 720p footage. Because zooming in so much on a 720p file in a 4k timeline looks so crappy, I'm doing 1080p timelines and scaling everything to the size it needs to be. I started in a 4k timeline then switched to 1080p because the 720p footage looked so terrible. However, in the 4k timeline, I didn't have any of the issues I'm showing in this first part of the video.
When I switched to the 1080p timeline, I discovered a weird quirk: When I resize the 4k (or 5k) footage to the size it needs to be (which varies based on the frame I want), it goes back to the 100% view when I'm scrubbing through it. When I pause, the size of the video goes back to the way I set it. I show this in the video. Then I show what was my working solution for the time being: "scale to frame size", which brings all the videos to the size of the sequence frame size and works fine. Later, I turn off OpenCL in premiere and when I scrub through the video, it doesn't zoom back in or only stay at the size I set when stopped. For some reason all of these issues only happen at 50% scale or smaller. It doesn't happen at, say, 60%.
I've tested this with raw R3D files and other 4K (or 5K) clips (even clips exported from After Effects) and the same thing happens. It doesn't seem to happen with 2.5k footage or 1080p footage.
Issue #2
This is the second project you'll see in the video.
After grading in speedgrade (through direct link) I open my project back up in premiere and start playing it back. The video plays back with delays and frame drops. Now normally, this would be expected. But this is 1080p pro res footage, and this is just an effect added, and the yellow bar appears indicating that open CL should be accelerating the playback and it should do so smoothly.
Maybe I was just wrong in assuming that a simple grade from speedgrade would be able to playback smoothly. I turn off the grade, and it plays normally.
But then, when I turn off open cl and leave the grade on, the video plays back without ANY issues.
So to me, it seems I'm still having issues with Open CL and adobe. I've found fixes that make it work temporarily, I don't need that kind of answer. However, I would like this to work. Is there something I'm doing wrong? Something I need to do to get this to work?
Here are my specs:
Mac Pro 6,1 (Late 2013)
3 GHz 8-Core Intel Xeon E5
64 GB 1867 MHz DDR3 ECC
AMD FirePro D700 6144 MB (x2)
OSX 10.9.4
Firmware: 2.20f18
What you're seeing is latest version of Premiere (CC 2014, v8.0.0 [169] Build)
Everything here is ProRes 422, running from a Promise Pegasus2 R4 RAID (drives: 4x Seagate Desktop HDD 4 TB SATA 6Gb/s NCQ 64MB Cache 3.5-Inch Internal Bare Drive ST4000DM000) (that's thunderbolt 2).
I've done everything: I've restarted my computer hundreds of times, I've reset NVRAM and PRAM and done power cycles.
This isn't just some issue that started with 10.9.3 of OSX, the 4k issues happened when I first switched to a 1080p sequence back in February (2014) or so, which means it was an issue even with 10.9.2 and the previous firmware release.
I've reported this issue to adobe.

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the app does not accept the change, and automatically enters its own time. Am I doing something wrong?

I am having issues with adjusting the duration of time for each still frame and transition in imovie 11. Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
Thank you,
lagrl

Have you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider. iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
Does this help. Perhaps you already know this ?

HT1365 Hi I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help

Hi everybody,
I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help
Thanks

Hello:
There was an OS X 10.7 update released a month or so ago that fixed this problem. Run software update.
Barry

I'm having issues with wifi still on 7.0.4

Similar Messages

Maybe you are looking for