I'm having multiple problems with my MacBook Pro, HELP!
I'm having quite a few problems with my macbook, such as:
-when I click on something from the dock it opens up the applications folder
-my keyboard is acting strange, when on safari the buttons act like shortcuts eg while typing it highlight file or edit print options come up or bookmarks
-when I click on a link on safari it opens up in a new tab
Please help, much appreciated
Charles
. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
Then restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
Similar Messages
-
Having multiple issues with my MacBook Pro
I have a MacBook Pro that I purchases new January 2013. I upgraded from Mountain to Maverick about 2 months ago, with no problems.
About 3 days ago it started acting up. It started with my not being able to open Safari, although a few hours later I could, but then the next day and since I have not been able to again. I am unable to open several other programs, such as any adobe (illustrator, photoshop, InDesign, etc.). My anti-virus program is responding (I use Web Root). The speed has drastically reduced, as well... very sluggish, which I suppose is not surprising.
I, also, am not able to restart or shutdown properly. Last night I forced a shutdown because absolutely nothing was opening. Today, I was atleast able to open Finder and other basics, such as Reminder. However, I just went to see what other's I may be able to open and now just Finder will. I cannot give specs because boxes will not stay open. They just open for about half a second.
I apologize if I am all over the place. Any help will be greatly appreciated, thanks!
PS. I believe the reason the few things that would open before are only flashing for half a second is because it is still trying to shutdown. When I tried to force a shutdown, it said that it is already shutting down, which it's been doing for about an hour now.Unfortunately, I think that the fact that you mentioned the presence of anti-virus software has dragged this discussion a bit off course. As you say that WebRoot has been installed for a year, while the problem just started recently (and not right after upgrading to Mavericks), I don't believe that the anti-virus software has anything to do with it.
As for what the problem might be, my best guess for something with such a sudden and unexplainable onset is a dying hard drive. Do you have backups of your data? If not, that could become a very serious problem. First priority needs to be figuring out a way to back up your data.
Once your data is backed up, check the hard drive's SMART status:
If it checks out fine (ie, says "Verified"), try repairing the hard drive with Disk Utility. -
I'm having multiple problems with Lion. Please help!
I downloaded Lion on the first day or release and it has been a very frustrating experience. Today, I reinstalled Lion hoping a fresh install would fix my woes but the problems persist. I'm in desperate need of advice and would appreciate any help from the gurus out there!
I have a 24" iMac with the following specs:
Problem 1) Ever since I installed Lion Safari is a nighmare. Roughly 30% of any given website loads. Below is a screenshot of www.apple.com:
Problem 2) No matter how many times I uncheck "restore windows after closing application" my mac opens EVERY window that was open previously. For example, I do a lot of graphics work and use Preview as my image medium. Every time I open Preview 100 + images load unless I go through each one of them individually and close each window. *****.
Supposed solution:
What Preview looks like each time I open the app: 100+ Images
Problem 3) Even with 4 gigs of ram my Ram is constantly ran into the ground ever since the upgrade and my computers performance is in the gutter. I have to constantly use "MemoryFreer" to free ram which is sometimes down to 14 MB free out of 4 Gigs.
PLEASE HELP! Thank you!
JustinRáNdÓm GéÉzÁ wrote:
Whether the line is old and tired or not, people are free to express their woes along with trying to find a fix.
TBH, Lion is a bit of let down, regardless fo whether there are issues present or not on your particular setup/system etc.
If a clean install has not fixed the issues above, I would be tempted to appraoch a Genius Bar and show them the problems. This may be faulty RAM and something that needs to be demonstrated, before a fix or repair can be considered.
Best of luck.
Yes you are correct, and as the OP did, questions are asked and other users try to answer. As for the poster I answered, he did not ask a question, but expressed extreme disappointment which he is entitled to do, therefore I suggested he have a read through some of the other threads to perhaps address whatever issues he is having. As you say it could be faulty RAM or a bad installation, or a hundred things inbetween. That is why you need to hunt down similar symptoms to narrow it down. Or if you are under warranty, let the Apple Store fix it.
Good Luck -
Anyone else having multiple issues with their Macbook Pro with the Lion Update?
I had beachballing and the wifi will not turn on. HELP
Unfortunately, I think that the fact that you mentioned the presence of anti-virus software has dragged this discussion a bit off course. As you say that WebRoot has been installed for a year, while the problem just started recently (and not right after upgrading to Mavericks), I don't believe that the anti-virus software has anything to do with it.
As for what the problem might be, my best guess for something with such a sudden and unexplainable onset is a dying hard drive. Do you have backups of your data? If not, that could become a very serious problem. First priority needs to be figuring out a way to back up your data.
Once your data is backed up, check the hard drive's SMART status:
If it checks out fine (ie, says "Verified"), try repairing the hard drive with Disk Utility. -
Hello i have some problems with my macbook pro
hello i have been having some problems with my macbook pro. for some reason it takes a very long time to turn on and once it gets to the password login it doesnt let me type the password.. but after about an hour or so it lets me log in..
chrism15_15,
is Mac OS X 10.6.8 what you currently have installed on your MacBook Pro? Do you still have your two grey installation DVDs which originally came in the box with your MacBook Pro? -
After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer. -
Having multiple problems with script - NTFS Permissions and AD Groups
Hi, all! I'm having multiple problems with my first script I've written with Powershell. The script below does the following:
1. Prompts the user for a corporate division under which a shared folder will be created, and adjusts variables accordingly.
2. Prompts if the folder will be a global folder or an office/location-specific folder, and makes appropriate adjustments to variables.
3. If a global folder, prompts for the name. If an office/location-specific folder, prompts for each component of the street address, city and state and an optional modifier. I've prompted for this information in this way because the information
is used differently later on in the script.
4. Verifies the entered information and requests confirmation to proceed.
5. Creates the folder.
6. Creates an AD OU and/or security group(s).
7. Applies appropriate security groups to the new folder and removes undesired permissions.
Import-Module ActiveDirectory
$Division = ""
$DivAbbr = ""
$OU = ""
$OUDrive = "AD:\"
$FolderName = ""
$OUName = ""
$GroupName = ""
$OURoot = "ou=DFS Restructure Testing OU,ou=Pennsylvania Camp Hill 4410 Industrial Park Rd,ou=Locations,ou=Camp Hill,dc=jacobsonco,DC=com"
$FSRoot = "E:\"
$FolderPath = ""
$DefaultFolders = "Archive","Customer Service","Equipment","Inbounds","Management","Outbounds","Processes","Projects","Quality","Reports","Returns","Safety","Schedules","Time Keeping","Training"
[bool]$Location = 0
do {
$userInput = Read-Host "Enter CLS Division: (W)arehousing, (S)taffing, or (P)ackaging"
Switch ($userInput)
W {$Division = "Warehousing"; $DivAbbr = "WHSE"; $OU = "ou=Warehousing,"; break}
S {"Staffing is not yet implemented."; break}
P {"Packaging is not yet implemented."; break}
default {"Invalid choice. Please re-enter."; break}
while ($DivAbbr -eq "")
write-host ""
write-host ($Division + " was selected.")
$FolderPath = $Division + "\"
write-host ""
$choice = ""
do {
$choice = Read-Host "Will this be a (G)lobal folder or (L)ocation folder?"
Switch ($choice)
G {$Location = $false; break}
L {$Location = $true; $FolderPath = $FolderPath + "Locations\"; $OU = "ou=Locations," + $OU; break}
default {"Invalid choice. Please re-enter."; $choice = ""; break}
while ($choice -eq "")
write-host ""
write-host ("Location is set to: " + $Location)
write-host ""
if ($Location -eq $false) {
$FolderName = Read-Host "Please enter folder name:"
$GroupName = $DivAbbr + " " + $FolderName
} else {
$input = Read-Host "Please enter two-letter state abbreviation:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter city:"
$FolderName = $FolderName + $input + " "
$input = Read-Host "Please enter street address number only:"
$FolderName = $FolderName + $input
$GroupName = $DivAbbr + " " + $FolderName
$FolderName = $FolderName + " "
$input = Read-Host "Please enter street name:"
$FolderName = $FolderName + $input
$input = Read-Host "Please enter any optional information to appear in folder name:"
if ($input -ne "") {
$FolderName = $FolderName + " " + $input
$OUName = $FolderName
write-host
write-host "Path for folder: "$FSRoot$FolderPath$FolderName
write-host "AD Path: "$OUDrive$OU$OURoot
write-host "New OU Name: "$OUName
write-host -NoNewLine "New Security Group names: "$GroupName
if ($Location -eq $true) { write-host " and "$GroupName" MGMT" }
write-host
$input = Read-Host "Please confirm creation of new site/folder: (Y/N) "
if ($input -ne "Y") { Exit }
write-host
write-host -NoNewLine "Folder exists: "; Test-Path ($FSRoot + $FolderPath + $FolderName)
if (Test-Path ($FSRoot + $FolderPath + $FolderName)) {
Write-Host "Folder already exists! Skipping folder creation..."
} else {
write-host "Folder does not exist. Creating..."
new-item -path ($FSRoot + $FolderPath) -name $FolderName -itemtype directory
Set-Location ($FSRoot + $FolderPath + $FolderName)
if ($Location -eq $true) {
$tempOUName = "ou=" + $OUName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "OU exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "OU already exists! Skipping OU creation..."
} else {
write-host "OU does not exist. Creating..."
New-ADOrganizationalUnit -Name $OUName -Path ($OU + $OURoot) -ProtectedFromAccidentalDeletion $false
$GroupNameMGMT = $GroupName + " MGMT"
if (!(Test-Path ($OUDrive + "CN=" + $GroupName + "," + $tempOUName + $OU + $OURoot))) { write-host "Normal user group does not exist. Creating..."; New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
if (!(Test-Path ($OUDrive + "CN=" + $GroupNameMGMT + "," + $tempOUName + $OU + $OURoot))) { write-host "Management user group does not exist. Creating..."; New-ADGroup -Name $GroupNameMGMT -GroupCategory Security -GroupScope Global -Path ("OU=" + $OUName + "," + $OU + $OURoot)}
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
# $FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
write-host $BIUsersSID.Value
# out-string -inputObject $BIUsers
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$objUser = New-Object System.Security.Principal.NTAccount($ADGroupName)
$objUser.Translate([System.Security.Principal.SecurityIdentifier]).Value
write-host $ADGroupName
write-host $objUser.Value
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
$ADGroupName = "JACOBSON\" + $GroupNameMGMT
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
Out-String -InputObject $ar
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
} else {
$tempOUName = "cn=" + $GroupName + ","
write-host
write-host $OUDrive$tempOUName$OU$OURoot
write-host
write-host -NoNewLine "Group exists: "; Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)
if (Test-Path ($OUDrive + $tempOUName + $OU + $OURoot)) {
Write-Host "Security group already exists! Skipping new security group creation..."
} else {
write-host "Security group does not exist. Creating..."
New-ADGroup -Name $GroupName -GroupCategory Security -GroupScope Global -Path ($OU + $OURoot)
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$ADGroupName = "JACOBSON\" + $GroupName
$FolderACL.SetAccessRuleProtection($True,$True)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($ADGroupName,"Modify","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
My problems right now are in the assignment/removal of security groups on the newly-created folder, and the problems are two-fold. Yes, I am running this script as an Administrator.
First, I am unable to remove the BUILTIN\Users group from the folder when this is an office/location-specific folder. I've tried to remove the group in several different ways, and none are having any effect. Oddly, if I type in the lines directly
into Powershell, they work as expected. I've tried the following methods:
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$FolderACL.Access | where {$_.IdentityReference -eq "BUILTIN\Users"} | %{$FolderACL.RemoveAccessRuleAll($_)}
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
$FolderACL.SetAccessRuleProtection($True,$True)
$BIUsers = New-Object System.Security.Principal.NTAccount("BUILTIN\Users")
$BIUsersSID = $BIUsers.Translate([System.Security.Principal.SecurityIdentifier])
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($BIUsersSID.Value,"ReadAndExecute,AppendData,CreateFiles,Synchronize","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.RemoveAccessRuleAll($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
In the first case, the script goes through and has no apparent effect because afterwards, I do a get-acl and the BUILTIN\Users group is still there, although when looking through the GUI, inheritance appears to have been broken from the parent folder.
In the second case, I get the following error message:
Exception calling "RemoveAccessRuleAll" with "1" argument(s): "Some or all identity references could not be translated."
At C:\Users\tesdallb\Documents\FileServerBuild.ps1:110 char:5
+ $FolderACL.RemoveAccessRuleAll($Ar)
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : IdentityNotMappedException
This seems strange that the local server is unable to translate the SID of a BUILTIN account. I've also tried explicitly putting in the BUILTIN\Users SID in place of the variable in the New-Object line, but that gives me the same error. I've
also tried the solutions given in this thread:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ad59dc58-1360-4652-ae09-2cd4273cbd4f/remove-acl-issue?forum=winserverpowershell and at this URL:
http://technet.microsoft.com/en-us/library/ff730951.aspx but these solutions also failed to have any effect.
My second problem is when I try to apply the newly-created security groups, I also will get the "Some or all identity references could not be translated." I thought I had found a workaround to the problem by adding the -PassThru option to
the New-ADGroup commands, because it would output the SID of the group after creation, however a few lines later, the server is unable to translate the account to apply the security groups to the folder.
My first Powershell script has been working well up to this point and now I seem to have hit a showstopper. Any help is appreciated.
Thanks!I was hoping to stay with strictly Powershell, but unless I can find a Powershell solution, I may resort to ICACLS.
As for the problems with my groups not being translatable right after creating them, I think I have solved this problem by using the -Server parameter on all my New-ADGroup commands and this example code seems to have gotten around the translation problem,
again utilizing the -Server parameter on the Get-ADGroup command:
get-acl ($FSRoot + $FolderPath + $FolderName) | fl
$FolderACL = get-acl ($FSRoot + $FolderPath + $FolderName)
# Add the new normal users group to the folder with Read and Execute permissions
$GroupSID = Get-ADGroup -Identity $GroupName -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity,"ReadAndExecute","ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
# Add the management users group to the folder with Modify permissions
$GroupMGMTSID = Get-ADGroup -Identity $GroupNameMGMT -Server chadc01.jacobsonco.com | Select-Object -ExpandProperty SID
$SIDIdentity = New-Object System.Security.Principal.SecurityIdentifier($GroupMGMTSID)
$Ar = New-Object System.Security.AccessControl.FileSystemAccessRule($SIDIdentity, "Modify", "ContainerInherit, ObjectInherit", "None", "Allow")
$FolderACL.AddAccessRule($Ar)
Set-ACL ($FSRoot + $FolderPath + $FolderName) $FolderACL
Going this route seems to ensure that the Domain Controller I'm creating my groups on is the same one that I'm querying for the group's SID to use in the FileSystemAccessRule. It's been working fairly consistently.
Still having issues with the translation of the BUILTIN\Users group, though. -
I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.
Do you have Parallels installed by any chance? There is a known problem that causes symptoms similar to this. You do not need to actually be running Parallels at the time and nothing in ActivityMonitor would point to Parallels. An update corrects the problem:
http://kb.parallels.com/111541 -
I'm having frequent RSDs with my MacBook Pro 15" Core Duo Model A1150.
I'm having frequent RSDs with my MacBook Pro 15" Core Duo Model A1150. Checked inside for dust around fans, etc., but none was visible. Laptop gets very warm, more so on the left side than right. Any suggestions for finding the problem & solutions?
Using Apple Hardware Test
Kelley Computing - Rember
But it's covered by Apple's warranty - if you ask, they should erase & reinstall OS X then if it still panics without adding any 3rd party software, there has to be some problem with the computer. -
How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
MarceloIf there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac -
Help!
i had a problem with my macbook pro: on tuesday 16th (agoust, 2011) I went to a friend's house and show her some document i had in my computer, then i turned off my mac and it asked me: "there are some actualizations available, do you want to update before turn off?" i clicked on yes, waited for update and then the macbook turned off. When I got back home, I tried to turn it on again.... but nothing: it didn't sound baaaammmmm as allways, it didn't reacted. I tried again, but useless.
The next day i went to one of these "authorized management centers", but they coudn't say anything or do anything about it. First they told me the problem was the battery, then the hard disk, then the video card... but don't. I left my mac there by two weeks, hoping they could help me, but they didn't. So I picked it up and go to other place.
The rare thing is that i have just two years with my mac, and i didn't do anything stupid on it (didn't fall, get wet, microwave, hot, shocked, hit or anything) It just stopped working. Two times it turned on. But if not, it's the same story:
When i pushed the button to turn on, sounds like baaaaaammmm, but then again, and again, and again, and the screen doesn't get blue or anything, it appears a foder with a "?" and then the computer turns off...
Im wondering if this is a problem on this computers, because some of my friends told me things much like that that happened with their macbooks.
What's going on??? why this is happening?? cn you help me?This article may help: A flashing question mark appears when you start your Mac.
-
I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?
try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard) -
i have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?
Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work? -
After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB
How can i do that?What did you "put as slave?" What Mac model do you have, exactly?
-
have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
The Apple icon, usually at top left corner, appears in top right corner in a strip including all that left hand. When the computer is restarted, the screen goes back to normal. But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode. My large flat screen is relatively new.
The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.That sounds like a Hardware problem.
You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation.
Maybe you are looking for
-
Want to sell old iMac. It has been backed up, de-authorized with iTunes, and wiped with the 35-pass erase. Now I want to reinstall OS X but no longer have an internet cable as we have gone from TWC to the ATT 'fiber optics' system since the old Mac
-
In FF 3.6, adjoining the back forward button (on the left of address bar), there was a dropdown which allowed me to jump back/forward to any page in the history list of the tab. This feature is missing in FF4. Is there any setting to enable it?
-
Import from HD folder with NEF and JPEG files-Can't see JPEG files
I am using Aperture 2 and I am trying to import from an external HD folder of images, with both NEF and JPEG files of the same photo. Using the import function, the import pane only shows the NEF file, not the JPEG file. Is there a setting somewhere
-
Hi, I want to check whether a row already exists in the VO level and the database before inserting. Due to the design, i will not be able to check this in the EO level. Im trying to use findInCacheByKey() in the VO and then executequery to check in d
-
How do I send pages documents in my email to people who do not have pages? have pages?
How do I send Pages Documents in my email to people who do not have Pages?