I'm having problems loading web pages on a vmware workstation 6.05 guest OS using Firefox 3.5.9. I can ping external websites fine from the guest. No proxy. Any ideas?

I'm having problems loading web pages on a vmware workstation 6.05 guest OS using Firefox 3.5.9. Also tried the latest 3.6 version. I can ping external websites fine from the guest. No proxy. Any ideas?
== This happened ==
Every time Firefox opened
== I installed a guest OS

I'm using the same swear words as you. There are several threads about this problem - no answers.
I have a LaserJet 8100N and 8150DN, get the 79.01FE error on the 8150 from print outs from Safari, Firefox, and Preview, for only some sites/documents. CNN.com has become my test site, seems I can crash the printer 90% of the time with their home page at any given time in the day.
A summary of what I have tried:
- Upgraded the firmware to the latest for both the JetDirect card and the printer.
- Swapped the JetDirect cards between the 8100 and 8150.
- Swapped ram on the 8150 board.
- Disconnected external trays, bins, and removed extra RAM and hard drives from the 8150.
- Tried setting the JetDirect link and matching switch port link to 100FD, 10HD, 10FD, 100HD, as suggested by a poster.
- Tried having client's print to the printer through a XServer Print Server.
- Can consistently create the error from multiple systems running 10.3.9, 10.4.5, and 10.4.6 (didn't have an install base of 10.4 before 10.4.5).
Someone in the 'know' (which means they're likely not), said 10.4.7 will likely fix this. Being Apple has not even addressed that the problem exists (that I could find), I doubt the magic fix is a release away.
Apple's software is triggering something that Windows systems appears not to be, so one could say it's an Apple problem; but ulimately it's HP's software/hardware that is at fault in that it is allowing their system to crash from input alone.
G4/G5 XServes

Similar Messages

Safari and Firefox on my desktop suddenly stopped combine ting to any website. IPad and IPhone work fine from the same wifi. Any ideas.

Safari and Firefox will not connect to website On desktop. IPad and IPhone work fine from the same wifi.

Restart your router.

Hello,i have a problem with my gift card here in switzerland,when i want to redeem the cod says that the code is not good for i tunes....and i buy the gift card from the shop...any idea? thx

Hello,i have a problem with my gift card here in switzerland,when i want to redeem the cod says that the code is not good for i tunes....and i buy the gift card from the shop...any idea? thx

I have one of these http://store.apple.com/us/personalize/itunes?product=M9949
but the credit on it is 30 chf....i try to reddem into itunes and after all the steps i recive a message that says"the serial code is not good...." i don t know why say this....

I can't update my apps, I think that the problem is that I've change my password from my ID Apple but they have not change from the telephone configuration. Any idea?

I can't update my apps, I think that the problem is that I've change my password from my ID Apple but they have not change from the telephone configuration. Any idea? Thanks

Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe

New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord. Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on.

New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord. Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on. Sometimes holding the power button for a second is enough for it to come back on.

I took it to the Genius Bar, and they identified it as a hardware issue. Just got it back today. Parts replaced were:
620-5629 Display Module — Symptom: Distored/blurred/focus video issue
605-3284 Top Case with Keyboard — Symptom: specific key(s) do not work
So far so good. I'd suggest taking it in and not trying to work around it — it's a rare hardware issue (given the number of threads about it) and should be replaced.

In VB6, why is the "GPIBNotify sub" (from the GPIBNotify AtiveX Ctrl) all the time called even if no Event happened? This callback function is started then stopped permanently as if its received SRQ from the GPIB Bus. Any ideas?

I'm programming in Visual Basic 6 to communicate between a computer and HP Measurement Devices (BER-Meter) with GPIB. I have already read information and code for this. My platform is W98. The NI488.2 commands can be sent without any problem between the equipements. However when I'm using the GPIBNotify ActiveX Control to use the callback function, there is a permanent starting and stop of the GpibNotify Sub. The SetupMask and RearmMask are set to RQS and the HP Device is well configured. Moreover an oscilloscope measuring the 10th line (SRQ
) of the bus didn't show any pulse on the line behalf the right one. Any Idea?

Hello-
So, the SRQ is not detected by the oscilloscope? It must be a setting that is not correct with the instrument. Try contacting the manufacturer of the instrument for details about SRQ's. The GPIBNotify ocx will not be able to react to an SRQ if there isn't one.
Randy Solomonson
Application Engineer
National Instruments

Problems loading web pages - must dump cache to get them to load

With increasing regularity I have been encountering a problem in Firefox where a link is selected and the message "waiting for..." appears in the status bar, but the page never loads. I clear the cache and start my navigation from the beginning and it works. However, a few more clicks and it stop again. I tried the same thing in Safari and the behavior is similar except Safari says "connecting", but never does. I click the link again and it connects.
I thought it might be a problem with the dns coming from my router (NetGear) as it is serving up an extra dns ip address that does not appear in the router console. But, I am not sure. Anyone have any ideas?

I'm dying to get a resolution to this problem too. One minute webpages will load just fine, then another time, it might take 3 minutes. It's making me insane, and I'm tempted to dump this machine and get a PC. None of the PCs in my house are having issues, even the one that's running Win 7 RC version.

Problems loading web pages - Macbook Pro

Hi all, so this has been going on a lot recently and I have no idea why.
Websites on my Macbook Pro are slow to very slow to load, and sometimes won't load at all. For instance, YouTube hasn't worked on my laptop for approximately 2 weeks. The sites I go to most often tend to load alright, but there are times nothing will load. But it seems even in those times, my cell phone (which accesses my WiFi) loads webpages just fine when using my wireless internet.
I've had the same internet provider at two different houses, and it worked just fine with my laptop at my last residence. I've upgraded my router (2 months ago, seemed to help some) so that it is better suited to handle the number of devices and square footage. I have 20 mbps internet speed and it is pretty consistent.
I'm wondering if anyone else has had this problem? Like I said, YouTube won't load at all (says data not received on Google Chrome, just never loads on Safari) and other web pages are slow to load if at all (also get a data not received on Chrome, nothing on Safari). Usually when this is going on I try different websites on my iPhone while it's on WiFi and my internet is working fine. At this point I just don't know what else to do.

Ditto, I think. I believe it started when I loaded Yosemite... Happens at work as well as at home (same Mac). I have a MacBook Pro 15 Inch Mid2010. Status bar shows that it starts to load and then just quits 1/8 of the way through.
It usually works after I restart my computer, but obviously that's not how I want to operate when I am working on important projects.
Any help would be awesome! Thank you.

WRT330N Problems loading web pages (DNS??)

I have a new WRT 330N. I get a weird effect when using it. While web surfing, it is common that the browser (IE or FireFox) will return an error that they can not find the web page. If you reload many times you will finally load it. I have a high latency link (Satellite), but before you suspect the satellite, my older Linksys router does not have this problem. The error returns so quickly, I believe the router must be trying some kind of DNS caching or something. After you have been to a site one time, it responds fine (for some period of time (Hours)), but the next day you get to enjoy the error again.
This problem happens on both my PC and MAC.
I have tried it without using any security (WPA or WAP) and with.
I have changed my DNS servers, but am sure the ones I am using are quality.
I have the 1.00.3 firmware.
Thanks

The problem is still here, but I think I have found more clues.
If I look in the admin logs I se messages about blocked packets (No active connection). Could the router be loosing track of his TCP connections?
Note: I tried turning off firewall security on the router.
The text below has firewall on, but none of the three options is active.
[INFO] Thu Jan 17 19:01:02 2008 Log viewed by IP address 192.168.15.102
[INFO] Thu Jan 17 18:57:54 2008 Blocked incoming TCP packet from 205.188.7.134:5190 to 69.71.157.162:56745 as RST:ACK received but there is no active connection
[INFO] Thu Jan 17 18:56:54 2008 Blocked incoming TCP packet from 205.188.7.134:5190 to 69.71.157.162:56745 as ACK received but there is no active connection
[INFO] Thu Jan 17 18:54:54 2008 Previous message repeated 2 times
[INFO] Thu Jan 17 18:54:46 2008 Blocked incoming TCP connection request from 69.3.240.218:4341 to 69.71.157.162:135
[INFO] Thu Jan 17 18:54:01 2008 Previous message repeated 1 time
[INFO] Thu Jan 17 18:53:54 2008 Blocked incoming TCP packet from 205.188.7.134:5190 to 69.71.157.162:56745 as ACK received but there is no active connection
[INFO] Thu Jan 17 18:53:40 2008 Blocked incoming TCP connection request from 69.3.240.218:4341 to 69.71.157.162:135
[INFO] Thu Jan 17 18:53:22 2008 Previous message repeated 3 times
[INFO] Thu Jan 17 18:52:54 2008 Blocked incoming TCP packet from 205.188.7.134:5190 to 69.71.157.162:56745 as ACK received but there is no active connection
[INFO] Thu Jan 17 18:49:54 2008 Previous message repeated 3 times
[INFO] Thu Jan 17 18:47:26 2008 Blocked incoming TCP packet from 216.236.127.75:443 to 69.71.157.162:56756 as RST:ACK received but there is no active connection
[INFO] Thu Jan 17 18:47:26 2008 Blocked incoming TCP packet from 216.236.127.75:443 to 69.71.157.162:56751 as RST:ACK received but there is no active connection
[INFO] Thu Jan 17 18:46:35 2008 Blocked outgoing TCP packet from 192.168.15.102:56751 to 216.236.127.75:443 as PSH:ACK received but there is no active connection
[INFO] Thu Jan 17 18:46:35 2008 Blocked outgoing TCP packet from 192.168.15.102:56756 to 216.236.127.75:443 as PSH:ACK received but there is no active connection
[INFO] Thu Jan 17 18:46:34 2008 Time synchronized
[INFO] Thu Jan 17 18:46:34 2008 Requesting time from 207.46.232.182
[INFO] Thu Jan 17 18:46:23 2008 Blocked outgoing TCP packet from 192.168.15.102:56745 to 205.188.7.134:5190 as FIN:ACK received but there is no active connection
[INFO] Thu Jan 17 18:46:23 2008 Blocked outgoing TCP packet from 192.168.15.102:56745 to 205.188.7.134:5190 as PSH:ACK received but there is no active connection
[INFO] Thu Jan 17 18:46:18 2008 Initialization complete, starting DHCP server
[INFO] Thu Jan 17 18:46:16 2008 DHCP Server Parameter 19 was added to the parameter database
[INFO] Thu Jan 17 18:46:16 2008 DHCP Server Parameter 3 was added to the parameter database
[INFO] Thu Jan 17 18:46:16 2008 DHCP Server Parameter 1 was added to the parameter database
[INFO] Thu Jan 17 18:46:14 2008 Starting WAN Services
[INFO] Thu Jan 17 18:46:14 2008 Gateway remote administration enabled on port: 8080
[INFO] Thu Jan 17 18:46:14 2008 WAN interface is up. Connection to Internet established with IP Address 69.71.157.162 and default gateway 69.71.157.161
[INFO] Thu Jan 17 18:46:14 2008 Bringing up WAN using Static IP Address
[INFO] Thu Jan 17 18:46:14 2008 WAN interface cable has been connected
[INFO] Thu Jan 17 18:46:13 2008 Wireless system with MAC address 0017F246E72F associated
[INFO] Thu Jan 17 18:46:12 2008 DHCP Server Parameter 6 was added to the parameter database
[INFO] Thu Jan 17 18:46:12 2008 LAN interface is up
[INFO] Thu Jan 17 18:46:12 2008 LAN Ethernet Carrier Detected
[INFO] Thu Jan 17 18:46:11 2008 Device initialized
[INFO] Thu Jan 17 18:46:11 2008 Wireless Link is up
[INFO] Thu Jan 17 18:46:11 2008 No Internet access policy is in effect. Unrestricted Internet access allowed to everyone
[INFO] Thu Jan 01 00:00:00 1970 Loaded configuration from non-volatile memory

My Mom's 2011 iMac is having issues loading web pages.

This past week my mother's iMac (2011) began having issues with the internet. She told me that whenever she ties to search for something on the internet, the reload bar in Safari constantly spins and takes forever to load (around 40 seconds).
We are using an Air Port Extreme router (2011 model), and my mom's iMac still has Snow Leopard (Mac OS X [10.6.8]) installed. The other computers in our house (a 2009 HP Touchsmart, a 2011 MacBook Pro, and a 2013 MacBook Pro) have no issue whatsoever. I recently had to restart the AirPort device in June due to issues, but it was fine for the last month up until Sunday, July 20th, 2014. The iMac is connected to the AirPort Wi-Fi network, but it's incredibly slow.
Is this problem happening because she hasn't updated her computer to OS X Mavericks?

Try rebooting the modem and router and her iMac. If that doesn't help create a new network location Using network locations (Mac OS X v10.6 and later)

Firefox is having problems loading web sites using Dish Networks as a network provider

Loading of various web site is very sporadic. Some days worse than others.

I had posted the problem previously & accidently marked the problem as solved.
I received the following message since:
"I am not sure how my previous post solved the problem but since then I think I have found the answer.
I simply enabled Shockwave Flash 10.0.32.18
From the Firefox Homepage it is located under:
Tools\Add Ons then select the PlugIns Tab
Select Shockwave Flash then enable it.
Regards,
Phil "
This has fixed the problem. Thanks Phil.

Ever since I upgraded tp 4.0, I've had problems loading web pages.

About 80% of the time I click on a website, Firefox redirects me to some unrelated, unwanted page. Sometimes I can get to the intended website on a second attempt, but not always This never happened until I loaded 4.0. Is this a known issue that will be resolved, or am I stuck with this total frustration until a new version is available? Why am I constantly being redirected from what I want, even when I physically type the correct http:// . . . into the search?
Also, Firefox keeps opening new websites with movies, music, gossip, and dozens of other unsolicited pages. Since everyone can block pop-ups, is this the new version of the pop-up? This is incredibly annoying because it stops me dead in my tracks with whatever I was doing and slows my computer. (It doesn't open a new tab; it opens an entirely new window.) How can I block these? And how do companies, without permission, open a new, unsolicited webpage on my computer?

I seem to have rid myself of the TypeError situation. I had some programs blocked at start up which were always blocked I allowed them to be on and I also turned off the excellorator. And I no longer get that error. But I still cannot give gifts in my facebook games, so I have to go to Google Chrome to play the games

Hi. Whenever I open a new tab, Firefox jumps to it even though I've unticked that in the Options menu. Any ideas?

no further details.

Tab Mix Plus also has an option to immediately switch/focus on a new tab when opening.
Your version of the following plugin has known security issues and should be updated.
* Adobe Shockwave for Director Netscape plug-in, version 11.0
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox

My macbook(2008) has been working well until a few hours ago. I tried plugging it in to several outlets but the light stays green no matter what, It will not charge. Also it will not stay on or turn on if I unplug it from the outlet, anyone have any idea

My macbook(2008) has been working well until a few hours ago. I tried plugging it in to several outlets but the light stays green no matter what, It will not charge on any outlet. Also it will not start when it is unplugged when my battery is at 50%. It also will shut down immediately if I unplug it from the charger, even though it says it isnt being charged by it. Can anyone help with this problem?

So you have the 13" aluminum notebook that just says "MacBook" on the display, correct?
You can get a new battery for $100 from Other World Computing here.
Alternatively, you can get one through Apple for $130 here.
I personally would go through OWC - they're a highly-recommended third party for these kinds of parts and their batteries work just as well as Apple's.
~Lyssa

OS10.6.8 -- i need to remove Helvetica Neue Family from the system...any ideas?

I know deleting this is not the answer. Any other ideas.

Helvetica Neue should be OK but if you see any of these get rid of them:
Fonts known to cause problems:
Helvetica Fractions, Times Phonetic and Alien.
If you have them, delete them!
More useful information here:
http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html

I'm having problems loading web pages on a vmware workstation 6.05 guest OS using Firefox 3.5.9. I can ping external websites fine from the guest. No proxy. Any ideas?

Similar Messages

Maybe you are looking for