I'm having problems registering Final Cut Studio

I recently purchased and installed Final Cut Studio. I successfully installed it, except there was a message at the beginning of the process saying there was some sort of registration problem. I don't know exactly what the message was and can't replicate it now. the program did complete the install process but when I try to open individual application I am prompted to enter a registration again. I tried entering the number that registers the whole suite but that didn't work.

I am afraid to do this because my hard drive is almost full. this brings up another question. I wanted to do a custom install and put what ever I could on another ATI drive in my computer but somehow that custom install thing seemed to fly right by without giving me an oppourtunity to do anything. What will happen if I reinstall? Will it install all the content again? I only have 9GB left on that hard drive. I was going to try to move all that once I was able to open the apps. How can I just uninstalll everything and just start over?

Similar Messages

  • Register Final Cut Studio twice?

    Last night I did a clean install of OS X and I have reinstalled all of my programs. Now when it comes to registering Final Cut Studio (I have registered it in the past), is it ok to register it again? If not, the register dialogue box will pop up every now and then. I would like to register to keep this window from showing up, but I don't want to set off the Cupertino sirens and end up with the SWAT team crashing through my window... that can ruin your week.
    Thanks!
    Josh

    Register it again. No problems.
    Plus it gets rid of that annoying message...sometimes.
    Shane

  • I have a new iMac but having problems installing final cut express 4 from old macbook pro ?

    i have a new iMac but having problems installing final cut express 4 from old macbook pro ?

    FCE was discontinued nearly 3 years ago and is no longer supported.
    I don't know whether it's possible to install it on Mavericks and if you do it may not perform properly.
    Final Cut pro X and iMovie are the only Apple apps that are supported.

  • Problems installing Final Cut Studio on my new Macbook Pro

    I just got my new 17 inch Macbook Pro, and am trying to install Final Cut Studio 3.  It installed just fine, and accepted the serial number.  The problem is that every time I open the application, I have to reenter the serial number.  Once I do that, it runs fine, but the next time, I have to reenter the info again.  Anyone have an idea of how to fix this?
    Rob Krampf

    do some searching here.  I remember other people having this problem.  You might also try repairing permissions on your startup drive, deleting your fcp preferences
    https://discussions.apple.com/docs/DOC-2491
    And creating a new account in system preferences:  accounts.

  • Having trouble installing Final Cut Studio...

    So I recently bought my pal's Power Mac G5 dual 2.2GHz, reinstalled the OS (ver. 10.4.11), and am now installing all the software I use, including Final Cut Studio 2. Everything installed fine thus far, until FCS 2, which gets past the audio content portion of the install before stopping. All it says is "Please try to install this software later." (or something to that effect). The discs are good (new), I have a working serial number (it installed/operated perfectly on my old machine before I switched out), and as far as I know this machine is in better shape than my old one (a dual 1.8GHz G5, late 2004 model). My current machine is NOT an Intel model.
    Any ideas, brethren? I really need to get back to video editing, and this is slowing . . . me . . . down. Mahalo.

    I am having the same problem. I have read many postings and the solutions are not working. I had a hard drive fail in a G5. I am running OS 10.4.11. I replaced the drive with a 250 gig (top bay) loaded the OS and install FCP 5.1 upgrade by using the 4.5 key when requested. Just like Mr. Dirctor stated:
    the install asked for the FCPStudio disc to be reinsert after the "audio loops" disc was loaded. The install fails immediately and states: Errors during install - please try again. After another go, skipping audio install, the other install disc Motion, DVD 4, LiveType produces the same error.

  • I cant register Final Cut Studio 2

    hi there i recently purchased Final Cut Studio 2 and everytime i open one of the applications i have to re-enter the serial number etc. Now i have tried to register online but i get the following page:
    https://register.apple.com/cgi-bin/WebObjects/GlobaliReg.woa/54/wo/3rfTqAZoSfXMp 4IXgJl0cw/5.1.0.3.41
    Does anyone know how i can register and stop having to enter the info each time i open a application?

    welcome,
    no need to reinstall, sounds like it could be a old system id file. check these out-
    http://docs.info.apple.com/article.html?artnum=303184
    and
    http://discussions.apple.com/thread.jspa?threadID=965240&start=0&tstart=0

  • Problem Installing Final Cut Studio

    I am trying to load Final Cut Studio on my Mac Pro Tower and it told me that i need to have an Intel processor. How do I fix this problem?

    Understand that running the final cut apps on a g5 is not supported. The PPC architecture of the G5 is quite different than that of an intel machine.
    x

  • How to register Final Cut Studio after upgrading system?

    After upgrading my system and changing to a new G5 Final Cut Studio lost Registering Info.
    Always after around 5 times booting Final Cut I have a dialog box, that I have to register.
    But the "Register Now" button is not aktive!
    What to do?
    G5 2x2 GB 1,5 GB RAM Mac OS X (10.4.7)
    G5 2x2 GB 1,5 GB RAM   Mac OS X (10.4.5)  

    Make sure you have filled out all the fields
    If I remember right, there is one field that is left blank (can not remember which one). Fill that one in, and the register button should become active.

  • Problem installing Final Cut Studio 2 on MacBook Pro

    I'm trying to install Final Cut Studio 2 on a MacBook Pro / Snow Leopard but when it comes to choosing install options Final Cut Pro is greyed out and just says skip.
    I've done some research and found people with the same problem but none of the fixes I've seen have worked. I also have Logic Pro installed - which I installed first - which seems to be causing the problem. I've tried removing Logic but am still seeing the same problem.
    Besides a clean install does anyone have any suggestions?

    Read this article on how to install final cut pro after logic studio.

  • Problem Installing Final Cut Studio Upgrade

    I recently purchased the Final Cut Studio Upgrade. When I went to input my SN for FCP 6 to install the upgrade, it rejects it as invalid. Have FCP 6 on my computer operating just fine. what gives?

    Check to make sure your current FCP install (FCP 6) isn't an academic or Not-For-Resale version; neither is eligible for upgrade.
    If you have a legitimate retail version of FCP 6, make sure you are entering the exact serial number as found on the two stickers affixed to the front of the booklet titled "Installing Your Software" that came packaged with FCP 6.
    Be careful to enter a 0 (zero) instead of an uppercase O and a 1 (one) instead of a lowercase l (L) or vice versa. The serial number should be 1 letter - 3 numbers - 3 letters - 3 numbers - 3 letters - 3 numbers - 3 letters - 3 numbers - 3 letters - 3 letters - 1 letter with 3 numbers
    -DH

  • Problem licencing Final Cut Studio cross upgrade

    I purchased the coss upgrade from Final Cut 4.0 to Final Cut studio (FCS)
    After entering the licence code for FCS, a error message says: "The licence file will not be written to disk because the user does not have enough priveleges".
    I am logged in as Admin - I even made another account as Admin, but the same message. FCS allows you to install the software, but when finished, every program in FCS prompts for a unuqie licence key - which did not come with the package.
    What am I doing wrong?
    G5 2Ghz Dual   Mac OS X (10.4.5)  

    We've also seen where you might need to delete one or more of the ID files.
    Sorry, can't recall the exact post.
    The post was just here a few days ago. Try searching for "license".
    bogiesan

  • MacBook Pro Problem with Final Cut Studio

    For some reason Final Cut Studio will not run on my MacBook Pro 2.33GHz Intel Core 2 Duo. It loads then disappear. The only version that worked was 5.0 but felt very slow so im thinking it was using rosetta. After reinstalling OSX hoping that would help. Still that didnt help. I installed 5.1 then used Apple Software Update to download all the update. All update was install but still nothing works. Well if this post seems similiar to someone else post please point me to the right place. any answer will help thanks. I've read the support CPU but didnt see any information on whether it support the Core 2 Duo.

    no reason it shouldn't work, and work very well at that.
    do none of the FCS apps work, or is it just FCP?
    if you have just finished a full reinstall, then for good measure you should run Repair Permissions from /Applications/Utilities/Dissk Utility
    it may also be that the preference files are corrupted (try FCP Rescue http://fcprescue.andersholck.com/ )
    also try the prebinding thing ... see this post by Brian Conner http://discussions.apple.com/thread.jspa?messageID=3961108&#3961108 or the apple technote http://docs.info.apple.com/article.html?artnum=93984
    cheers
    Andy

  • Firewire Problems with Final Cut Studio 2

    I recently made the leap and purchased a Macbook Pro and FCS2. But I have not been able to capture in Final Cut 6 from my Canon XL2. The capture window tells it is not reading timecode. Now if i use iMovie I can capture just fine, but Final Cut just won't read from the camera. I also purchased an Edirol FA-66 for some ADR and foley work on a project I have, but Soundtrack Pro won't read from it either and just like the Final Cut/iMovie scenario the interface can used thru Garageband with no problem other that latency delays.
    Is there some firewire menu in System Setting or something else I am missing? I have used both pieces of gear of G5 setups witht he previous version of FCP with no problem but I am totally lost with the new MacBook Pro and FCS 2...
    Please, help me.
    MacBook Pro 2.33 Ghz Intel Core Duo 2   Mac OS X (10.4.10)   2 gig ram, FCP Studio 2, XL2 and Edirol FA-66

    With the Cannon have you tried the obvious and used the Firewire Basic setup? I assume that FCP6 still uses that .. and are you plugging the Cannon directly into the book's FW port .. not daisy chaining .. that's an issue with Cannons I believe

  • Upgrade Problem from Final Cut Studio to Final Cut Studio 2

    Hi everyone - any advice would be greatly appreciated. I own FCS HD and recently purchased the upgrade to FCS2. When installing FCS2, the installer says I need to upgrade several of the component applications. For example, I currently have Final Cut Pro 5.0.4, Motion 2.0.1 and DVD Studio Pro 4.0.3. However, I cannot find the upgrade applications on the Apple Website. For example, only 5.0.4 is available on the website and there were versions 5.1, etc. What do I need to do to get all my apps upgraded to FCS2?
    Thanks
    CirclingKailas

    Well, if you purchased the upgrade to FCS2, you need to install it from the install DVDs. When that is done, then you go to the SYSTEM UPDATE preference pane in the SYSTEM PREFERENCES application.
    If you currently have FCP 5.0.4, Motion 2.0.1...then you haven't installed FCS2 yet.
    Shane

  • I'm having problems installing final cut pro pls who can help.

    i just bought a macbook pro and i have a final cut pro, i've had it for two years now. i tried installing it to my new computer its not installing. please i want to know is it because the final cut is old or there is other reason.

    Hi ...
    Since you purchased Final Cut Pro two years ago, then post your question in the Final Cup Pro forum here.
    This forum is for apps that have been purchased and downloaded from the App Store which has only been available since Jan 2011.

Maybe you are looking for

  • HELP. "The requested URL was not found on this server." (iPhone videos)?

    So i was editing a bunch of videos on iMovie on my phone and while exporting, i didn't have enough space. So I thought that I would delete the videos off my Camera Roll (the ones i'm putting into iMovie) thinking that i would still be able to export

  • How disable the access and charged for Cellphones by USB

    I tried to disable access to storage USB devices to computers on Windows 7, I changed the key USBSTOR record the value of 4, and works well for flash drives, but when I connect my cell phone via USB is loaded as a portable disk which causes users of

  • How applet jar files are downloaded

    Hi, I want to deploy my app as an applet in a jar. So assuming the end user has a compatible JRE installed. The HTML in my page would point to my jar on the server and when the page is opened, the jar is downloaded to the end user machine and run in

  • Editing a document not created in Lifecycle Designer

    I am trying to amend a PDF document in LiveCycle Designer 8. When I open the PDF I get a message saying it was not created in LiveCycle Designer but a copy of the original will be created. I have got as far as amending the text but the copy that is c

  • Transformations for Date Format

    I have a flat file which contains a field for date as 02-10 for MMYY, how can I change it to 0210, can I use formula builder?