I'm having problems uploading files (to YouTube & SendSpace) with Firefox. Both work fine using IE. Any idea what the problem could be?

When I try to upload to YouTube, things appear to be working, but every time it either ends up telling me the upload has been interrupted or it shows that the upload finished & then the file is nowhere to be found in my account. When I switched to IE, the upload worked fine the first time. When I tried to upload to SendSpace, I "browsed" for a file to upload, selected the file, & then nothing happened at all. Again, when I switched to IE, the upload worked just fine. I imagine there is some setting in Firefox that I need to change, but I have no idea what it is & can't figure it out by looking through the menus I see. I need some help!

Jean, Thanks for your answer, I've tried checking the invoke node that calls the "Run VI" method but it doesnt return an error any of the times its called even that the Vi that it called is still running. I also tried your solution of changing the object's "Run" method to a template but that doesnt work either. I can't seem to post the sample progam that demonstrates the problem, is it possible to send it to you by email, contact me at [email protected]
Attachments:
Sample_program.zip ‏926 KB

Similar Messages

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

My phone freezes, refuses to open some applications some times, switches off and restarts by itself... any idea what the problem is?

I am using iPhone 5 (iOS 7.1.2). It often switches off and restarts by itself, sometimes it refuses to open certain applications until I switch off and restart it. Sometimes it does not make a call through unless I switch off and restart.
Any idea what the problem could be and any advice to what I should do ?

Hi jallam,
If you are having issues with restarting and apps not launching you may want to try this to troubleshoot.
Since restarting has not helped, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
Thanks for using Apple Support Communities.
Best,
Brett L

Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Does any1 have any idea what the problem is?

Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Happens with charger plugged in or not and green charge light stays on even when it cuts out and cant be turned on! Does any1 have any idea what the problem is?

Try SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.

HT201269 My wife switched from an iPhone 4 to an iPhone 5. Everything transferred over and service is on the new phone. However, texts are going to her old phone still. Any idea what the problem is?

My wife switched from an iPhone 4 to an iPhone 5. Everything transferred over and service is on the new phone. However, texts are going to her old phone still. Any idea what the problem is?

As long as iMessage is enabled and the old phone is connected to a WiFi access point, it will continue to receive iMessage texts. It won't receive non-iMessage texts nor will it receive any calls.

HT1040 I have a full page photo in a iPhoto book that is splitting into two sections across 2 pages. Any ideas what the problem might be?

I have a full page photo in a iPhoto book that is splitting into two sections across 2 pages. Any ideas what the problem might be?

Have you selected the spread layout?
If so change it to a single page full page layout
LN

I was trying to update my IPAD 2 but it stucked, any idea what the problem can be

I was trying to update my IPAD 2 but it stucked, any idea what the problem can be

Stuck how ? What is showing on the iPad's screen, and/or in iTunes on your computer ?
If the iPad won't start up then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

TS3694 My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many than

My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many thanks.

Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy

TS3988 trying to buy more storage on the cloud, response is 'there was a problem - try again later' its been doing this over the last two hours - any ideas what the 'problem' is please (assuming its not me) - thanks

trying to buy more storage on the cloud, response is 'there was a problem - try again later' its been doing this over the last two hours - any ideas what the 'problem' is please (assuming its not me) - thanks

Additional info on this:
I strongly suspect this is time machine-related. Even though time machine has been turned off, this happens at intervals of exactly one hour.
A single entry appears in the kernel log at the precise moment the (first) popup error box appears. This is:
"AppleSRP started."
Anyone have any clue how to go about diagnosing or fixing this? I don't even mind trying something brute force (short of wiping the HD and reinstalling lion, which I really DON'T want to do; I don't mind a non-destructive reinstall).

I have recently purchased finale 2011, and it installs, but will not run? Any idea what the problem is?

I have recently purchased the finale 2011 music program, and it installs without any problems, but will not run when I try to start up the program. It acts like it is going to start, but stops when loading the plugins. I have been talking with Finale tech support for three days, and they are coming up empty, but they are still trying. Any ideas what the problem might be?
Thanks,
John

Try booting in Safe Mode (hold the shift key while booting until the grey progress bar appears).
If you're able to log-in, then re-boot and log-in

Whenever I try to log in to my Gmail account, the page redirects for a loooong time, then says that it won't load properly, and that the problem may be caused by not enabling cookies, but I have them enabled. Any idea what the problem might really be?

Whenever I try to log in to my Gmail account, the page redirects for a loooong time, then says that it won't load properly, and that the problem may be caused by not enabling cookies, but I have them enabled. Any idea what the problem might really be?

I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?

My iPad and iPod touch won't play the music I choose. Has anyone any idea what the problem could be?

Hi,
Since the IOS 5.0 update my iPad 2 and iPod touch (3e generation) won't play the music I choose. I choose a song from Michael Jackson for example and it's going to play something completely different. The images has changed aswel, so it is a bit strange.
I treind to sincronise them again, but this doesn't change a thing. Has anyone any idea what could be the problem and how to solve it?
Kind Regards,
Ward

So just in case anyone else ever runs into this...
I solved the issue and it was that between the plug of the new earbuds being slightly thicker than the Apple earpods, and the width of the case that I was using for my iPod, there wasn't a connection being made to activate the remote function.
I took off the case and now the earbuds work exactly as they should!

HT4356 Can't find the wireless HP 3050 printer via phone or I pad. Printed test page found no problems and stated setup was successful. Any idea what the problem is? Thanks. is

Can't find the wireless signal from my newly installed HP 3050 printer via I phon or I pad. Printer test page found no problems and states successful setup. Any ideal on the cause of the problem? Thanks.

Hello Sashalechat,
Welcome to the HP Forums.
I see that you are having an issue when attempting to connect to a wireless network.
Have you changed the router for a new one?
Make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Make sure that you are with in the 4'-20' range.
You can try the HP Print and Scan Doctor as well. Let me know if you see any error codes or messages.
Write me back when you have time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I have installed the new version of FCP 10.2 on my iMac and MBA and both instalments are crashing on launch. I have tried deleting preferences and have reinstalled FCPX on both machines. Any idea what the problem may be and how to resolve it?

FCP 10.2 on my iMac and MBA are crashing on launch

I had the same crash type as Pajero Fan and Kidago, except my machine is a iMac mid-2011 12GB RAM, AMD Radeon 6770M, Yosemite 10.10.3 fresh install and FCP 10.2. My crash was very similar to the AMDRadeon but mine is with the AMDRadeonX3000GLDriver.bundle.
Crashed Thread:        4 Dispatch queue: NSOperationQueue 0x600000c26840 :: NSOperation 0x600000a593e0 (QOS: USER_INITIATED)
Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000196aa1003
VM Regions Near 0x196aa1003:
    Image IO               0000000196a9e000-0000000196aa1000 [   12K] rw-/rwx SM=PRV
-->
    __TEXT                 0000123480000000-000012348029b000 [ 2668K] r-x/rwx SM=COW /System/Library/Extensions/AMDRadeonX3000GLDriver.bundle/Contents/MacOS/AMDRade onX3000GLDriver
I created a new user account, and FCP 10.2 launched and works fine. However, using 3D Text gives an FCP warning that my hardware is not capable of doing 3D text.
Back as my original user account, I did a Repair permissions and found a TON of group/user issues such as,
User differs on “System/Library/Extensions/AMDRadeonX3000GLDriver.bundle/Contents/PkgInfo”; should be 0; user is 502.
Group differs on “System/Library/Extensions/AMDRadeonX3000GLDriver.bundle/Contents/PkgInfo”; should be 0; group is 20.
(BTW, user 502 is the UNIX name for the new user account I created.)
That DIDN'T fix it.
Using Find Any File I was able to delete the "Layouts" folder, and FCP launches ok, but any attempt to start a new project, import a file, results in a crash. Maybe related to the 3D text feature.

HT2638 Hi, My Iphoto (on Mavericks) shows me a thumbnail but actually it is another photo whan you open it up...any idea what the problem could be? big thanks!

This has happened since my snow leopard update to be fair. I continuously mess up all of my "events" with photoes that shoul now be there due to this mistake.
Anyone know something about it?
Big thanks in advance

given the time this problem has existed hard to say what the results will be but Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your thumbnails - this may take several tries
LN

I'm having problems uploading files (to YouTube & SendSpace) with Firefox. Both work fine using IE. Any idea what the problem could be?

Similar Messages

Maybe you are looking for