I'm having problems with facebook notifications.  The sound doesn't work but shows up in banner.  Any suggestions?  I've tried everything but restoring.  Is it a phone problem or an app problem?

I am having a problem with facebook notifications.  The sound doesn't work but appears as a banner.  I've tried everything but restoring the phone.  Is this a phone problem or an app problem?  Has anybody experienced this problem and were they able to correct it? 

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Similar Messages

  • Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

    Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

    i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

    Will u help me or not?

  • In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    Hello Kiira Doon,
    The troubleshooting steps detailed below may help get your iPhone's display to function.
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    My issue is still not resolved. What do I do next?Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • TS1398 my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help

    my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help

    When you say it "can not scan any wifi network" do you mean it is not detecting Wi-Fi networks?
    Is Wi-Fi turned on in Settings > General > Wi-Fi?
    Have you tried Settings > General > Reset > Reset Network Settings?
    Is it just the home network that the device will not connect to? or any network?

  • My iphone 5c the sound doesn't work only with earphone.

    my iphone 5c the sound doesn't work it works only with earphone.

    Hi there lavodette,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    -Griff W. 

  • When I rec videos with iPhone 5 the sound doesn't exist but only a annoying noise..WHY?!

    Suddenly now when I rec videos with iPhone 5 the sound doesn't exist but only a annoying noise..WHY?!

    Only songs that are physically stored on the iOS device can be deleted with a swipe. Songs that have been listened to, and are in the temporary cache, apparently can not be deleted with a swipe. The easiest way to get rid of these songs is to go to Settings > General > Usage, tap Music (you may need to scroll down in the list), swipe across "all music" then tap the delete button. This will delete ALL music on the device.
    Also, iCloud and iTunes Match are not the same service.

  • Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

    Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

    Make sure the silent switch is not set to mute.  If you can see the red dot, it is on mute.
    It may think you have headphones plugged in, try plugging and unplugging a wired headset a few time.
    The next step would be to restore as new.
    If none of that works, a warranty exchange would be the resolution.    

  • The sound doesn't work in apps viber, magick jack and skype

    when I try to make/answer a call in magic jack, skype or viber the sound doesn't work... i only can hear if I use the speaker mode... What should I do to fix it???

    Could this be an error?
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    And this is what I found regarding my sound card
    HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    HDA Intel 0000:00:14.2: setting latency timer to 64
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input2
    input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/inpu
    t/input3
    input: HDA ATI SB Mic at Sep UNKNOWN Jack as /devices/pci0000:00/0000:00:14.2/in
    put/input4
    input: HDA ATI SB HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/i
    nput/input5
    HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    HDA Intel 0000:01:00.1: irq 30 for MSI/MSI-X
    HDA Intel 0000:01:00.1: setting latency timer to 64

  • The sound doesn'e work in apps viber, magick jack and skype

    when I try to make/answer a call in magic jack, skype or viber the sound doesn't work... i only can hear if I use the speaker mode... What should I do to fix it???

    Make sure the Ring/Silent switch isn't showing a red bar or dot.
    You can also try restarting or restoring the iPhone.

  • HT1657 I rented a movie and the sound doesn't work, how do I fix it?, who do I direct to for a complaint?

    Hi, I rented warhorse HD, and the sound doesn't work, my itunes version is 10.6.1(7). How do I fix it or who do I direct to get my money back? Thank you

    I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

  • The sound doesn´t work for games, videos and music,

    the sound doesn´t work for games, videos and music, but it works if use my hearphones

    Hi mellidani,
    If you are having speaker issues with your iPhone, you may find the following article helpful:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Regards,
    - Brenden

  • The sound doesn't work on my recently purchased hp laptop computer

    Hi,
    The sound doesn't work on my recently purchased hp computer. It stays on mute. Can I get someone in Lower Hutt NZ to call to fix this problem?
    Thanks. 
    Steve Taylor

    Sorry, but this is a peer-to-peer user supported forum. HP maintains no official presence on this forum. HP is unlikely to contact you via this forum. Any response you receive from a HP employee is that of their own and not on behalf of HP.
    When requesting assistance, please provide the HP model name and/or product number of the computer in question. Also provide the brand and model of monitor, connection means (HDMI, DVI, VGA, etc.), and if you have external speakers connected to your computer.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Just bought iPad gen3 the silence switch on the side doesn't work, it shows the symbol on screen but doesn't silence the iPad?????

    Just bought iPad gen3 the silence switch on the side doesn't work, it shows the symbol on screen but doesn't silence the iPad?????

    The Side Switch is to mute your ringers, and most of the application's sound. To totally mute the sound, you must use the rocker to mute it.

  • I downloaded the new software for mac book pro with retina and the office doesn't work

    I downloaded the new software for mac book pro with retina and the office doesn't work

    cynthia alia wrote:
    I downloaded...
    ... but did you INSTALL it?
    Office::2008 was drag & drop, but Office::2011 has an installer you need to run.

Maybe you are looking for

  • Oracle Discoverer - Export report as PDF

    Using Oracle Discoverer Desktop 10.1.2.1 with Adobe 7 installed. We do not see an option to export as a PDF file. It was my understanding this should be an option. Is there a way to add PDF as an export option?

  • How to change the font of a cell in an Excel spreadsheet from within LabVIEW?

    The Font property appears to be a Read-Only property and I can not find another ActiveX Property or Method that seems to do the job.

  • Schema binding versus XML data binding

    I have been able to create a fillable XFA form using XML data and employing the xfa.host.importData(""); script. This has worked well. I now find that I must do a similar thing - only using a schema to bind the data to the PDF form fields ... Can you

  • I've got a big problem

    I had a computer crash tonight. I lost all the fun stuff on my computer, including my 30 gigs of music. I have a fourth generation iPod which has about 5 gigs of music on it. Many of the music I lost is gone forever because I sold the cds or otherwis

  • Is there a way to apply the same transition to many clips at once?

    If there are about 70 clips for a slide show s there a way to apply a crossfade to all of the clips at once? Thanks, Pete D.