I'm having problems with my Serial Number, can anyone help?

Hey guys.
Alright, so a few weeks ago I bought a Wacom Bamboo Capture tablet, and it comes with a copy of Adobe Photoshop Elements 8.0
Now, I installed it previously and it worked perfectly.
Then, all of a sudden, I go to boot it up, and I'm asked for my serial... AGAIN.
Also, it's giving me the whole 'Not valid' error.
It's irritating the hell out of me.
Does anyone have any ideas as to what the possible problem could be, or how I could possibly fix it?

Aeverin I would start with removing Photoshop Elements and then reinstalling it. Also which operating system are you using? Do you have any other Adobe software installed?

Similar Messages

Newly bought but declined aperture serial number :-( , can anyone help?

I just bote aperture online and it gave me this serial number but when i enter the serial number its not working at all. i says invalid serial number! is anyone had the same problem?

thanks, called to apple center in u.s and they helped me to solve the problem

The mail application on my I-Mac dates all mail, whether sent or received, as 5th (of whatever month it is). The computer clock is working, so it's not that. And the time seems to be right. I have no problem with my MacBook. Can anyone help, please?

The mail application on my I-Mac dates all emails, in or out, as 5th (of whatever month it is). It seems to get the time right.
The computer clock is fine. I have no problem with my MacBook - just with the I-Mac. Any ideas, please?

OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

Very frustrating problem with Photoshop Elements 10 - can anyone help?

I don't know what's happened, and I haven't changed any of the settings or anything.
When I open a photoshop file I am currently working on, now, no matter what I do, nothing changes in the actual photo. Even when I delete layers to see if it reverts back to the original photo, nothing changes. When I try adding new layers, nothing happens, when I try adjusting something such as opacity, or brightness/saturation, nothing changes.
I've tried opening/creating other photoshop files and I have the same problem, so it seems a problem with the actual software, rather than individual files. Even after uninstalling then installing the software, the problem is still there.
Does anyone have any idea what is causing this? Or could you direct me to a good help forum/source?
Many thanks

Welcome to the forum.
I would go to the Photoshop Elements Forum, and look for Loraclf's post there, or post with your problem, your equipment info, and the problem. Someone there will be able to help you.
Good luck,
Hunt

Problems with Flexible Parameter Passing - Can anyone help with the answer

Hi,
having gone to the trouble of creating a generic form handler which utlises the ability of the PL/SQL Gateway to handle flexible parameters, we've come across an almighty problem.
Whilst the gateway will create two arrays of parameter names and values, it doesn' t seem to handle arrays of values. So, although some of our forms have multi select list form elements, these seem to be incompatible with the Flexible parameter method, as only the first value is returned.
Does anyone know of a solution to this?
I really hope so, otherwise the whole methodology is a waste of effort, and I can't imagine why Oracle bothered to include it!
Here's hoping.
Thanks
Dan

Not sure what flexible parameters are but in the past I've worked on a form that had to pass multiple values (from a multi-select list item) to a report via a single parameter. We did this by creating a pipe delimited ("|") string of all the selected values. Leading and trailing pipes were also added to the concatenated string.
This was exploded into individual rows by using the statement below:
WITH t AS (SELECT '|1|2|3|4|' str FROM dual)
SELECT str, level
, SUBSTR(str, INSTR(str, '|', 1, level) +1, INSTR(str, '|', 1, level+1)-INSTR(str, '|', 1, level)-1) str2
FROM t
CONNECT BY INSTR(str, '|', 2, level) <> 0;
'|1|2|3|4|' is the value of the passed in parameter.
So the report query could look something like
WITH t AS (SELECT SUBSTR(:p_str, INSTR(:p_str, '|', 1, level) +1, INSTR(:p_str, '|', 1, level+1)-INSTR(:p_str, '|', 1, level)-1) itemid
FROM dual
CONNECT BY INSTR(:p_str, '|', 2, level) <> 0)
SELECT a.*
FROM items a, t
WHERE a.itemid = TO_NUMBER(t.itemid);
Hope this helps.

Problem with Disk Utility. Can anyone help?

For months now, my friend's iMac no longer verifies or repairs disk permissions. This is what it reports everytime:
Verify permissions for “Macintosh HD”
*Reading permissions database.*
*Reading the permissions database can take several minutes.*
ACL found but not expected on "Applications/Utilities".
*Permissions verification complete*
It does all this within 5 seconds each time. Clearly it is not verifying/repairing disk permissions because normally you get a huge list of permissions and it takes way more than 5 seconds.
So if anyone can tell me what might be wrong or how to go about fixing, I'd really appreciate it.
Thank You,
David

Try this way:
Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you continue to have the same issue then while booted into the installer disc select Reset Password from the Utilities menu. Do not make any changes to the password section, rather to the bottom where there is an option to fix the permissions on the user's Home folder and to remove ACLs. Select that option and then click on the Done button (I think it's the Done button.)

I AM TRYING TO DOWNLOAD A FRESH COPY OF CS6 BUT HAVING TROUBLE WITH MY SERIAL NUMBER

I AM TRYING TO DOWNLOAD A FRESH COPY OF CS6 BUT HAVING TROUBLE WITH MY SERIAL NUMBER?

Hi Rob,
Please share few more details about the issue you facing.
Which Operating system you have?
Which product are you using?
What exact error message/code you get?
Thanks,
Ratandeep Arora

I have an iphone 4 just updated my iTunes and now i'm having troubles to sync my iPhone with iTunes... can anyone help me plz?

i have an iphone 4 just updated my iTunes and now i'm having troubles to sync my iPhone with iTunes... can anyone help me plz?

You need to do as provided. If no change after restoring as a new iPhone or not from the backup, the iPhone has a hardware problem.

I am having difficulty getting my scanner (HP5590 Scanjet) working with my MacBook Pro, can anyone help please. It did work alright with my IBM notebook.

I am having difficulty getting my scanner (HP5590 Scanjet) working with my MacBook Pro, can anyone help please. It did work alright with my IBM notebook.

There's a new driver bundle for OSX 10.6 that you might need to install, the HP link seems to be failing at the moment but there's a version of it here: HP_Installer_Scanjet_v2.4.3_Ph4.dmg
There's a piece on the HP Forum about it here (some folks have problems installing ...)
http://h30499.www3.hp.com/t5/Macintosh-Compatible-Products/Scanner-Drivers-softw are-for-Snow-Leopard-Mac-OSX-10-6-will-not/td-p/2301674

I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?

I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

HT201210 Hey,I've got a problem on my iPad mini for a few days now?My iPad is in recovery mode at the moment and I Cannot restore my Ipad with iTunes...Can anyone help me with the solution?Each of your helps will be appreciate

Hey,I've got a problem on my iPad mini for a few days now?My iPad is in recovery mode at the moment and I Cannot restore my Ipad with iTunes...Can anyone help me with the solution?Each of your helps will be appreciate...Thanks for all the helps...

Follow step 1 to 6 closely to recover your iPad.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times

When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?

When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?

Hello there, RobenCaatje.
The following Knowledge Base article is specific for the issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Specifically:
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Lightroom doesn't recognize mine camera Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me?

Lightroom doesn't recognize mine camera, the Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me with this issue?
Ronald ( the Netherlands)

Sure the laptop know's that the Nikon D800E is connected, but lightroom doesn't recognise this camera. Two weeks a go it wasn't a problem at all.

Why I got this email if I didn't schedule any storage plan ? This is the email I got; On 10/07/2013 you are scheduled to be charged $20.00 for your 10 GB iCloud storage plan, but there is a problem with your payment information, Can someone help me

Why I got this email if I didn't schedule any storage plan ? This is the email I got;
On 10/07/2013 you are scheduled to be charged $20.00 for your 10 GB iCloud storage plan, but there is a problem with your payment information, Can someone help me ? I don't want to be charge for something I don't want to buy.

You may want to do couple things
1. cancel auto renewal for icloud - instructions here -under downgrade storage
http://support.apple.com/kb/HT4874
2. change your payment info in itunes, to either none or other payment method - instructions here
http://support.apple.com/kb/ht1918

Photoshop keeps crashing...saying an attempt was made to load a program with incorrect format. Can anyone help?

photoshop keeps crashing...saying an attempt was made to load a program with incorrect format. Can anyone help?

You can
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

I'm having problems with my Serial Number, can anyone help?

Similar Messages

Maybe you are looking for